Scm Tw 45 C nakup rabljenega (61.700)

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) Fsdpfevb Hanox Apljpg If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Fjdpfxovb E Uqe Aplepg Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), RS-Simulators Model: KKM 110/45 Manufacturer: RS-Simulatoren Water-cooled Climate Chamber 110 m³ incl. condenser The KKM 110/45 model is part of the TKM/KKM modular system by RS-Simulators – i.e., a modular climate chamber that is assembled on site. This construction offers: Modularity: Individual segments are pre-assembled and set up at the customer’s location. This makes retrofitting (more depth or additional modules) and future relocation straightforward. Technical Data Climate Chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Model: KKM 110/45 External dimensions: 6200 x 9400 x 3400 mm (W x D x H) incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 mm (W x D x H) Chamber door (double-leaf): 3600 x 2930 mm (W x H) Personnel door (single-leaf) on the side wall: 1880 x 900 mm (H x W) Feedthroughs: 8 x Ø120 mm (4x left & 4x right) Windows: 1x (460 x 550 mm) in the main chamber door, heated 1x (1260 x 1000 mm) in the left side wall, heated Temperature range: -40°C to +120°C Temporal deviation: ± 0.8K – 1.5K (according to DIN 50011 in an empty test chamber) Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerants: 2x R404A 52 kg 2x R23 17 kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Electrical Data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg Important information for you as a buyer! The following items are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) Fpodpowwg Uvefx Apljg (Specifications and information are subject to change and error!) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), Here we offer a temperature test chamber. Water-cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Unit section: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) Fpjdpfxsygunhj Aplsg For further questions, please feel free to contact us by phone.

Stanje: rabljeno, Ferwood-Kodex: RU0001071 - Zustand: Gebraucht - Kompatible Maschine: CNC SCM - Bei Interesse bieten wir einen Überholungsservice an, bitte kontaktieren Sie uns. Fjdpfju U D Ahsx Aplspg

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction With fixed milling spindle Fodpfshp Rcrox Aplspg 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Max. lowerable tool diameter: 180 mm SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Stanje: dober (rabljeno), Flat gear motor, geared motor, electric motor, geared electric motor, flat gear motor, flat-geared motor Fpjdpfx Aot Hy Thspljg - Manufacturer: KEB, flat gear motor - Type: F 4.2 C DK 100 LX 4 W TW i = 11.38 - Speed: 50 rpm - Motor: Type SK 100 L/40 - Power: 3.0 kW / 1,410 rpm - Hollow shaft: Ø 40 x 150 mm - Protection class: IP56 - Dimensions: 445/230/H360 mm - Weight: 60 kg

Stanje: novo, Leto izdelave: 2023, Okrogalni luštilnik za hlode CAMBIO 45 AIR TEN, CAMBIO 35, VK-450. Luštilnik bo prodan po generalni obnovi in bo opremljen z noži nove generacije. Stroj je mogoče prodati tudi kot del kompleta za luščenje hlodovine, ki vključuje: 1. Miza za neloščene hlode 2. Hidravlični cepilnik hlodov 3. Dovajalni transporter 4. Strgalo za odstranitev skorje 5. Odtokovni transporter z izmetnikom hlodov na levo stran 6. Žep za oluščene hlode Fjdpfjiqi S Nex Aplspg Vsa oprema je nova.

Stanje: potreben popravila (rabljeno), Leto izdelave: 2014, številka stroja/vozila: AA2/002546, število mest v zalogovniku orodij: 24, skupna masa: 6.600 kg, dolžina mize: 5.200 mm, širina mize: 1.300 mm, TEHNIČNI PODATKI Dolžina mize: 5.200 mm Širina mize: 1.300 mm Število rezkalnih vreten: 1 Tip rezkalne mize: nosilna miza Pozicije menjalca orodij: 24 PODROBNOSTI O STROJU Napetost: 400 V Poraba toka: 64 A Mere & teža Dimenzije (D x Š x V): 10.300 x 2.450 x 2.800 mm Fsdjy Nybtopfx Aplopg Lastna teža: 6.600 kg Transportni paketi: 1 OPREMA Vrtalno orodje Vakuumska črpalka Orodja Vakuumska črpalka Becker Vtlf 250: - Leto izdelave: 2008 - Glavna moč motorja: 5,5 kW - Priključni premer: 70 mm - Brezoljna: Da Opomba: Stroj je potreben popravila. Obstaja težava s CAN-bus sistemom.

Stanje: novo, Adjustment of infeed table using parallelogram system Chip removal display via graduated scale Simultaneous height adjustment and locking of work tables, complete with anti-tilt mechanism Quick conversion system for switching from surfacing to thickness planing (CE Version) Featuring a dedicated support for opening surfacing tables and an automatic pneumatic positioning system for the extraction hood, with hydraulic assistance "READY" electronic control includes: – Thickness table adjustment – Manual, semi-automatic, and automatic modes with 99 storable work programs – Additional functions: calculator and operating hours counter Automatic star-delta starting for main motor Machine table with height adjustment via 4 steel threaded spindles Rubber-coated outfeed feed roller Interchangeable feed rollers Segmented pressure shoes at infeed Cutter block and setting gauge for planer knives Fpedpfx Aod Akyzjpleg Micro-safety switches for correct positioning of surfacing tables and extraction hoods Surfacing guard (CE version) Automatic motor brake on main motor Thermal overload relay Emergency stop switch Lockable main switch CE declaration of conformity Technical data: Usable working width [mm]: 520 Total table length [mm]: 2310 Cutter block diameter [mm]: 120 Motor power [kW]: 9.0 Hz 50, 400 V Cutter block speed [rpm]: 5000 4 knives [mm]: 35 x 3 x 520 Aluminium surfacing fence [mm]: 1200 x 190 Surfacing fence tilting from 90° to -45° Min./max. planing height [mm]: 3 / 250 Feed speed for thicknessing [m/min]: 5-8-12-18 Extraction hood diameter surfacing [mm]: 120 Extraction hood diameter thickness [mm]: 120 Including options: - "TERSA" cutter block with disposable reversible knives - Tiltable auxiliary fence for thin workpieces

Stanje: novo, Stable steel and cast iron construction High-precision sliding table made from anodised aluminium, with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade tiltable to 45° Large outrigger table (960 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm Heavily ribbed jointer tables made of annealed, stress-relieved cast iron for decades of stability and flatness Helically toothed steel feed roller for consistent material feed Fpsdpfx Aoiiynnjpleg Three manually adjustable spindle speeds Spindle moulder with forward and reverse rotation Three independent industrial motors Equipped with lockable main switch, motor protection switch, and emergency stop switch Jointer table width: 410 mm Jointer table length: 1810 mm Maximum depth of cut: 4 mm Thicknessing table length: 605 mm Thicknessing table width: 410 mm Minimum working height: 3 mm Maximum working height: 230 mm Feed speed: 7 m/min Maximum depth of cut: 4 mm Extraction port diameter: 4 x 120 mm Planer cutter block type: TERSA (3 pcs) Cutter block diameter: 72 mm Speed: 5200 rpm Panel saw cutting length: 2250 mm Cutting width with rip fence: 900 mm Maximum crosscut width left of saw blade: 2310 mm Saw blade tilt: 90 – 45° Maximum cutting height at 90°: 90 mm Maximum cutting height at 45°: 63 mm Saw blade diameter: 315 mm Saw blade speed: 4000 rpm Sliding table and work table Sliding table length: 2600 mm Spindle diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Maximum milling tool diameter, retractable/not retractable: 180/210 mm Drive motor power: 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx.: 560 kg INCLUDES OPTIONS: - Handwheel with gravity digital readout for thickness table positioning - Sliding table length 2600 mm - Professional fences - 'TERSA' planer cutter block - Spindle moulder with forward and reverse rotation

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz Fsdoxqggcjpfx Aplspg 2 feed speeds Electromotoric table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front & rear Sanding pad inserts fitted with new graphite cloth Includes nearly new abrasive belts Includes all documentation Note for used machinery: • Errors in technical specifications and intermediate sale reserved. • Listed prices are ex-works and free loading! • The machinery has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your full address and telephone number!)

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding Working width: 1100 mm Min/max workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Abrasive belt dimensions: 1115 x 2620 mm Feed speed: 4.5 / 9 m/min Extraction port: 3 x 160 mm Compressed air connection: 6 bar 1st Unit: Sanding roller Rubber-coated 90 Sh Motor power: 11 kW Fpsdpfetwzyfox Aplsg 2nd Unit: Combination unit Rubber-coated sanding roller 60 Sh Rigid sanding pad Motor power: 11 kW 3rd Unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital thickness display Table extension at outfeed Dimensions (approx.) L x W x H: 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note for used machines: • Subject to technical changes and prior sale. • Prices quoted are ex-location and free loaded. • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and phone number!)

Stanje: novo, Wide belt sander for calibration and fine sanding Working width: 1,100 mm Min./Max. working height: 4 / 170 mm Abrasive belt width: 1,115 mm Abrasive belt length: 2,150 mm Gear motor: 2.2 kW Feed speed: variable m/min Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10” touchscreen operating panel “eye-S” 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH Motor power 1st unit: 18.5 kW Motor power 2nd & 3rd unit: 18.5 kW Version "B" for RRCS with: pneumatic switching on/off 1st unit pneumatic switching on/off 2nd unit pneumatic switching on/off 3rd unit “MESAR” elastic segmented sanding pad pneumatic switching on/off of the sanding pad unit electronic adjustment of working height SPECIAL PRICE! AVAILABLE IMMEDIATELY! Fedpsitvkujfx Aplopg

Stanje: novo, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Abrasive belt width/length mm: 1,370 / 2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" helical grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combi: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller-sanding pad unit - Activation of segments via electronic control, which synchronizes their engagement with feed speed and adjusts the number based on workpiece geometry, enabling selection of more or fewer segments to the left and right of the workpiece. Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into the machine frame Oscillating blow-off unit 2nd unit Fpodpfshtuvrjx Aplog Touch screen 10.4” display with ‘eye S software integration’ PLEASE NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic adjustment of the scorer unit Automatic rip fence with adjustment via lead screw and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis, with fine adjustment. Angle detection system via magnetic strip and LCD display. Crosscut fence with 3 LCD displays Extendable support table with roller support Technical data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scorer blade diameter mm: 120 Panel cuts with extendable stop mm: 3200x3200 Saw blade tilt range degrees: 0° / +46° Max. saw blade cutting height at 90° mm: 150 Fjdpjyftzksfx Aplopg Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scorer speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scorer unit power Hz 50 kW: 0.75 Cutting width with rip fence mm: 1270 Weight approx. 1180 kg Used machinery notice: • Technical data subject to errors and prior sale. • Prices quoted are ex-location, free loading! • The machine has been cleaned and function-tested. • All machines are purchased as inspected, with no warranty claims whatsoever. Buyers are invited to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address & telephone number!)

Stanje: novo, Equipment: Fsdpfxecrnm Nj Aplspg 5-axis electronic control Swivelling control panel above the table Electronic adjustment of the scoring unit Automatic rip fence with screw adjustment and linear ball bearing guide On/off switch integrated in the trimming carriage “Quick Lock” squaring frame Longitudinal fence with LCD displays “Full Support” Sliding carriage with curved contact surfaces – 10-year warranty! Telescopic arm with linear guide with ball bearing carriage Technical Data: Main saw blade diameter mm: 550 Scoring blade diameter mm: 120 Panel cutting capacity with extendable fence mm: 3200x3200 Saw blade tilting range degrees: 0 +46 Max. saw blade cutting height at 90° mm: 200 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scoring unit speed rpm: 8500 Dust extraction port diameter mm: 120 & 100 Main motor power Hz 50 / kW: 7.0 Scoring unit power Hz 50 / kW: 1.3 Cutting width with rip fence mm: 1500 Including the following OPTIONS: 570335 "Pro-Lock" system for quick clamping of the main saw blade with tool-free quick adjustment of the riving knife

Stanje: novo, Work table dimensions: 2500 x 780 mm Milling spindle diameter: 30 mm Swivel range of the milling spindle: +/- 45.50° Clamping length of the spindle: 140 mm Max. tool diameter under the table: 300 x 80 mm Spindle base overhang from table: 50 mm Extraction port diameter: 1 x 120 & 2 x 100 mm Fpsdpfx Aped Etkholsg Electrospindle motor power: 7.50 kW Electrospindle with inverter for speeds from 900 to 12,000 rpm Swiveling control panel with "Easy Touch 7" electronic control "Flex" milling fence with automatic adjustment via electronic control Spindle forward/reverse operation Extendable table support at the front INCLUDES OPTIONS: - "Fast" table insert with automatic adjustment via 'Easy' control - "LL" version with 2 cast iron table extensions, total length 2500 mm Note on used machines: • Technical data and prior sale subject to change and errors. • Quoted prices are ex-works, loaded free on truck. • The machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries with your full address and telephone number!)

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Na zalogi je horizontalna CNC mozničarka STARTECH CN Plus. Fpsdsip Dh Iepfx Aplsg

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Ključne značilnosti: Model: K 800R Kapaciteta: 1 enota, neto teža 2.472 kg Namen: lepljenje robov in obdelava lesenih ter plastičnih komponent za pohištveno industrijo Standardi: skladen z evropskimi varnostnimi predpisi (CE certifikat) Oprema in dodatki: AVTOMATSKI ENOSTRANSKI ROBNI LEPILNI STROJ Evropski varnostni predpisi (CE norme) Sestava Olimpic K 800 "T-ERL" (47) Napetost 400 V EU Frekvenca 50 Hz "AUTOSET" za sestave ER2, T-ERS in T-ERL Elektronsko upravljanje "StarTouch" namesto "Touch 7" Distančnik panelov na dovodni ograji Elektronsko pozicioniranje zgornjega pritisnega mehanizma Horizontalni pomik enote za čelno rezanje "K-SEL" Strgalna enota robov RAS/S 2P Protizlepilna enota "AAR" Naprava "EASY SIZE" Senzor za zaznavanje robov Komplet "IGLUE" za lepilno enoto Lepilni kotel "SGP" z ročnim doziranjem namesto standardnega Pnevmatski komplet z 2 pozicijama za obrezovalno enoto RI/800 Pnevmatski komplet s 3 pozicijami za obrezovalno enoto RI/800 Razpršilna naprava (meglica) za občutljive robove Strgalna enota za lepilo "RCA/2C" Krtačna enota "SPN" Strgalna enota robov z radijem = 1 mm Fedjyxcbhjpfx Apljpg Strgalna enota robov z radijem = 2 mm Leseni bloki

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Širokopasovni brusilni stroj SCM Sandya S600 RCS 110 | ODLIČNO stanje | Leto izdelave 2015 Naprodaj je visokokakovosten širokopasovni brusilni stroj proizvajalca SCM (Sandya S600 RCS 110) v zelo dobrem stanju. Stroj je popolnoma funkcionalen in takoj pripravljen za uporabo. Delovna širina: 1.100 mm Delovna višina: 4–170 mm Glavni motor: 15 kW Hitrost traku: 3–16 m/s Hitrost podajanja: 3–18 m/min Dolžina traku: 2.150 mm Jekleni kalibracijski valj R (Ø 140 mm) Kombinirana enota CS: Gumijasti valj (Ø 160 mm, 30 Sh) Elektronski segmentni brusilni čevelj (širina segmenta 30 mm) Leto izdelave: 2015 Zelo lepo ohranjeno, tehnično brezhibno Fodpfoy Hn U Aox Aplspg Vse informacije brez garancije. Tehnični podatki po navedbah proizvajalca oz. prejšnjega lastnika. Pridržujemo si pravico do napak, sprememb in vmesne prodaje. Brez jamstva ali garancije.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, SCM Class PX 350 i Technical specifications CLASS PX 350I - Max. sliding table travel [mm]: 3200 - Saw blade tilt: 0 ÷ 46° - Max. saw blade diameter (cutting) [mm]: 350 - Max. saw blade diameter (grooving + cutting) [mm]: 300 - Max. cutting height (D350) from table at 90°/45° [mm]: 105/72 - Max. cutting height (D300) from table at 90°/45° [mm]: 80/50 - Saw blade speed [rpm]: 4000 - Cutting width, rip fence [mm]: 1300 Other technical details: Fpsdpfxoy Nkbqe Aplsg - Three-phase motor: 7 kW 50Hz - Extraction hood diameter [mm]: 120 (1) – 100 (2) - Dimensions [mm]: L 4459 W 3196 H 1368 Extendable rip fence up to 3200 mm with digital displays, mounted on a large stationary table for panel support (600x1350 mm from the cutting line) Includes: 3 stops with independent electronic digital readout, system with magnetic strip and LCD display Extendable roller up to 1900 mm total length Absolutely as-new condition Year of manufacture: 2023 Available from the end of August Price: €22,000 incl. disassembly and free loading, ex-stock Stockerau, Lower Austria New price: €32,000 .

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: AA1/11510, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 19.250 h, moč: 7,5 kW (10,20 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, potovalna razdalja osi X: 3.080 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 280 mm, dolžina obdelovanca (maks.): 3.080 mm, širina obdelovanca (maks.): 1.200 mm, število osi: 3, število mest v zalogovniku orodij: 12, skupna višina: 2.346 mm, skupna masa: 4.000 kg, Oprema: CE označba, dokumentacija / priročnik, Ponujamo rabljeni obdelovalni center SCM Record 130, letnik 2000. Močnejša vakuumska črpalka 2050 m3/h. Rotacijska os Vector. Kotni menjalnik nastavljiv od 0 do 100 stopinj, HSK63. Vrtalna enota z 9 vreteni. Malo obratovalnih ur. Fpodpfxeyzadre Apleg Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 1994, Motor 6 / 7,5 kW s 4-valjnim podajalnikom, fiksne podajalne hitrosti. Razširitve hitrosti. Višina delovne mize: 920 mm. Nagib vretena: -10° do +45°. Največji izteg vretena nad mizo: 175 mm. Hitrosti vretena: 3250/6500-5000/10000 obr/min. Največji premer orodja: 250 mm. Teža: ca. 950 kg. Lokacija skladišča: Nattheim. Fpodpfxjw Enw Ij Apleg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable passage height Z = 350 mm with H50 suction cups OF0165 Axis travel speed for Accord 40 fx PRO-SPEED version OF0168 Pendulum mode OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via internet 450328 eye-M PRO operating console with integrated PC 450291 Additional fixed operating panel Fodpoyfgzdofx Aplspg 870068 TECPAD - remote control for machine functions 560058 No. 10 MATIC support rails - L1825 230429 MAXI processing unit - Prisma KT 1 870046 Preparation for right-angle head "Prisma KT-KS" 470014 Air nozzle for tools 870119 Tool length measuring device 870120 Panel thickness measuring device 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 support rails 510205 Preparation for clamping jaws for worktable with 10 support rails 480178 Front stop row H110 for worktable with 10 support rails 480105 Rear stop row H110 for worktable with 10 support rails 480137 First side stop row H110 for worktable with 10 support rails 480005 Suction cups H110 145x145 mm, 36 pcs 480006 Suction cups H110 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC support rail 10 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving systems 210837 TR12 – side tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-Machine Interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operation interface software Maestro cnc OF0435 Maestro cnc hardware dongle 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED: - Increased max. panel width for complete machining up to 2,120 mm; beam length remains unchanged at 1,900 mm. - 10 support suction cups for offcuts. MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE NEW 2023 EUR 399,890.--