Q-Fin Stroj Za Odstranjevanje Napak In Brušenje nakup rabljenega (132.409)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2026, Timesavers Serie 10 Manual Deburring Machine Blsdpfxefhb N So Acmoh This machine is a demonstration unit, which has occasionally been used for demonstrations. Very simple operation and comfortable handling. Features a grippy rubber conveyor belt as well as an additional vacuum zone for small parts. Speed is infinitely adjustable. The machine is located in our warehouse and can be inspected, tested, and accepted under power at any time.

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, moč: 1,5 kW (2,04 KM), vhodna frekvenca: 50 Hz, Ponujamo rabljeni stroj Hog Maschinen ABRADE MASTER PRO za fazetiranje in zaobljanje, letnik 2009. Letnik: 2009 Nazivna napetost: 400 V Frekvenca: 50 Hz Nazivna moč glavnega motorja: 1,5 kW Nazivni tok glavnega motorja: 16 A Nazivna moč sekundarnega motorja: 0,12 kW Stroj za faze in zaoblitve robov Nastavljiva faza 0-12 mm Zaobljitev 2-15 mm radijus Vključno z vpenjalno mizo in stojalom Opis: Pogon traku je električen z možnostjo vklopa oscilacije. Podajanje s 4 hitrostmi. Priključek za odsesavanje. Priključek za stisnjen zrak za čiščenje traku. Bedpfx Asy Ir H Sjcmelh Za dodatna vprašanja ali več informacij nam pišite ali nas pokličite.

Stanje: dober (rabljeno), Odbrojilni stroj, stroj za odbrojiljevanje cevi, stroj za odbrojiljevanje lukenj, naprava za odbrojiljevanje, stroj za odbrojiljevanje s krtačo, stroj za odbrojiljevanje s krtačo, žična krtača - Proizvajalec: wrt, stroj za odbrojiljevanje s podnožjem - Pogon: 3,0 kW / 2800 obr/min Bsdpjy R Rkzsfx Acmslh - Krtača: Ø 250 mm - Gred: Ø 80 x 110 mm - Dimenzije: 660/430/V1200 mm - Teža: 101 kg

Stanje: zelo dobro (rabljeno), Notranji premer 5-200 mm Globina brušenja 230 mm Obodni premer 50 mm Višina konic 180 mm Premer brušenja - notranji 5 - 200 mm Vrtina vretena 50 mm Hitrosti vretena obdelovanca 120 - 1000 obr/min Nagib 90° Samodejno gibanje mize pri rezkanju 3 - 600 mm/min Bledpfjy D T U Ajx Acmsh Hitrosti vretena 3600 - 40000 obr/min Premer vretena 90 mm Skupna potrebna moč 10 kW Teža stroja ca. 2,6 t Potreben prostor ca. 3,1 x 1,6 x 1,8 m Centri, notranji, zunanji, ploski

Stanje: rabljeno, NOTRANJA BRUSILKA VOUMARD 5 A Premer brušenja: 5-200 mm Največja globina brušenja: 250 mm Višina konice: 180 mm Največja dolžina obdelovanca: 500 mm Premer prehoda glave: 50 mm Hitrost glave nosilca obdelovanca: 125-1000 vrt/min Naklon glave nosilca obdelovanca: 90° Bjdsza Hk Uopfx Acmolh Hod mize: 3/600 mm Hitrost mize: 0-10 m/min Obrati vretena: 3600-40000 vrt/min Moč: 8-10 KM Dimenzije: 3200x1630 mm Teža: 2700 kg

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, višina središča: 180 mm, dolžina brušenja: 1.000 mm, premer brusilnega koluta: 508 mm, premer brušenja: 350 mm, dolžina obdelovanca med konicami: 1.000 mm, širina brusilnega kolesa: 100 mm, POZOR, PRODAJA NA LOKACIJI V 74219 MÖCKMÜHL! Zunanji okrogli brusilni stroj TACCELLA ELEKTRA 1018 MPC Stroj za notranje in zunanje brušenje Leto izdelave: 2006 Krmiljenje: Fanuc 21i Zunanje brušenje: Brusni premer: max. 350 mm Brusna dolžina: max. 1.000 mm B-os: ročna Notranje brušenje: Hitrost vretena za notranje brušenje: 0 - 30.000 1/min Pogonska moč: 7 kW Omejitev hitrosti z usklajenimi brusnimi vreteni. Oprema: - 2 ločeni brusni vreteni za notranje in zunanje brušenje - Brusni vretenast nosilec ročno zasučen - Notranje brušenje je nameščeno - Pinola - Avtomatski balansirni sistem - Merilni sistem za dolžino in premer obdelovanca - Senzor vibracij ohišja - Sistem za hlajenje in filtracijo - Odvod oljne megle Veliko brusnih plošč in dodatkov vključeno Bljdpfx Aey N Tapocmsh

Stanje: novo, Leto izdelave: 2026, Max. pass-through width: 1350 mm Processable sheet thickness: 0.5 - 80 mm Infinitely variable feed rate: 0.5 - 6 m/min Abrasive belt dimensions: 1910 x 1350 mm Brush element dimensions: 300 x 400 mm Abrasive belt speed: 12 m/s Number of planetary brush heads: 8 pcs Brush element speed: 8-26 m/s Brush element rotation speed: 1-15 rpm Material thickness setting precision: 0.01 mm Length: 3800 mm Width: 2300 mm Height: 2400 mm Bodeygx A Nspfx Acmslh Machine weight: 5500 kg Total connected load: 49.5 kW Standard equipment Machine configuration: 1st station: abrasive belt; 2nd station: brush elements Main components: PLC: Siemens Touchscreen: Siemens Low-voltage devices: Schneider Frequency inverters: Schneider Exhaust fan: Elektror, Germany Power specifications: Abrasive belt motor: 15 kW Brush motor: 11 kW Infeed conveyor motor: 4 kW Vacuum extraction motor: 15 kW Frequency inverter for rotary brushes: 15 kW Optional equipment Optional feed mode: 1. Feed with strong permanent magnet adsorption conveyor (suitable for steel workpieces, workpiece size ≥ 30 mm × 30 mm). 2. Feed with vacuum suction conveyor (suitable for stainless steel sheets, copper sheets, aluminum sheets, etc., which cannot be transported magnetically. Workpiece size ≥ 50 mm × 50 mm).

Stanje: zelo dobro (rabljeno), CV žagalni brusilni stroj Wagner model LT Bsdpsywaxnofx Acmelh

Leto izdelave: 2003, stanje: rabljeno, Kontaktni valj 70 x 50 Dimenzije trake 2000 x 12/50 Pogonska snaga 2,2 kW Dimenzije stroja cca 400 x 1100 x 1250 mm Brusilica s otvorenom brusnom trakom / stroj za skidanje srha Širina brusne trake od 12 - 50 mm u vertikalnom radnom položaju Obostrani nagib glave do 45° Jednostavno savijanje trake za praćenje oblika obratka Blodpfsy Ihabox Acmoh Brzina rezanja 24 m/sek veliki oslonacni stol s kugličnim valjcima uključujući samofiltrirni usisni sustav, filtar crijevo od vatrostalnog poliesterskog materijala za najsitnije čestice prašine, impeler s otvorenim lopaticama. Potrošnja zraka 700 m³/h4 s velikim asortimanom brusnih traka!

Stanje: rabljeno, Guideway and Surface Grinding Machine WMW FRITZ HECKERT Aschersleben Bljdpfx Acshv A A Djmeh Model: SZ 1000 x 1250 x 3000 / 344 Serial No.: 13.2236.2 Year of manufacture: 1989 Nominal grinding range: 3000 x 1250 mm Table clamping surface: 3240 x 1000 mm Maximum grinding length: 3300 mm Machining width: 1250 mm Machining height: 1250 mm Grinding wheel diameter (surface grinding support): max. 600 mm Grinding wheel width (surface grinding support): max. 100 mm Grinding wheel diameter (swivel support): max. 450 mm Electrical connection: 400 Volt, 50 Hz - Swivelling grinding support, drive power 16.5 kW, stepless speed control - Grinding support for surface grinding, drive power 15 kW, stepless speed control - new electrical control system based on SIEMENS S7, installed in 2001 - new electrical control cabinet, separate, year 2001 - Stepless grinding wheel speed adjustment on both grinding supports - Swivelling grinding spindle head for guideway and profile grinding - Swivelling and height-adjustable control panel - Coolant system, freestanding - Hydraulic system, freestanding - Oil circulation lubrication, freestanding - Various grinding wheels and mountings included Total required space (L x W x H): 11900 x 7700 x 4600 mm Weight: 45 tons In very good condition

Stanje: dober (rabljeno), CNC grinding machine Blodpfxsvviame Acmsh 3 grinding units per side

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €153,200 Leasing rate: €2,895.48 Working width: 1350 mm Sheet thickness range – mild steel: 0.4 – 120 mm Abrasive belt dimensions: 1370 x 2200 mm Extraction capacity: 6000 m³/h Connection for extraction: Diameter 150 mm Compressed air connection: 6 bar Length: 4200 mm Width: 2300 mm Height: 2350 mm Weight: 4200 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X BRUSH UNIT ABOVE Blodpfx Acsynmw Romsh * The machine is built from welded and normalized steel to ensure a stable and rigid structure. * Worktable with motorized height adjustment enabled by synchronized movement of 4 screws. * Independent motors with emergency brakes integrated within the machine frame. * Dust extraction hoods within the machine. The control panel includes: * Automatic star-delta starter for main motors * Digital display for material thickness with decimal accuracy * Thickness adjustment with control (+/- 0.1) * Alarm control center for immediate visualization of emergencies and/or faults. FEED UNIT * Table constructed of a solid metal structure with a ground and wear-resistant gliding surface. * Modified structures for vacuum systems available on request * Table lifts and lowers from 780 mm to a maximum height of 950 mm above floor level. Table height adjustment motor output: 0.25 kW. * Maximum permissible load on the table: 140 kg. * Variable feed speed via inverter from 0.4 to 4.5 m/min, optional: 0.2 to 2.0 m/min or 0.6 to 6.0 m/min. * Conveyor belt made of special natural rubber, oil- and heat-resistant, with automatic centering system. * Side guides preventing the conveyor from lifting. * Rubberized pressure rollers, oil- and heat-resistant, fitted before and after each working unit. * Automatic centering device for the conveyor belt * Automatically servo-cooled motor * Speed motor displayed on the main touchscreen 1ST DEBURRING UNIT WITH ABRASIVE BELT * Rectified and balanced contact roller, 180 mm diameter. Coated with oil- and heat-resistant nitrile rubber. Standard roller hardness 55° Shore. Mounted on an eccentric shaft, allowing control of working position and compensation for abrasive belt wear, up to 8 mm. This system is controlled by a pneumatic cylinder which enables the group to be engaged automatically and, in the event of an emergency and/or machine stop, allows immediate withdrawal of the belt from the working area. Abrasive belts and/or Scotch-Brite can be mounted. * Pneumatic ON/OFF switch. * Roller adjustment up/down ("grain" stroke 10 mm) * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotational speed in feed direction: 4 – 18 m/s. * Adjustable width and duration of oscillation. * Pneumatic abrasive belt tensioning system. LED indicator for wear control. * Abrasive belt centering system with electronic photo cell indicator; amplitude and intensity of oscillation adjustable. 2ND ROTARY BRUSHING UNIT * Consisting of 8 deburring brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and...

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Italy Price: €74,000 Leasing rate: €1,398.60 Working width: 1,350 mm Sheet thickness range (mild steel): 0.5 - 170 mm Abrasive belt dimensions: 1,370 x 2,200 mm Extraction capacity: 4,000 m³/h Extraction connection: diameter 200 mm Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Length: 1,750 mm Width: 2,100 mm Height: 2,180 mm Weight: 2,000 kg EQUIPPED WITH 2 WORKING STATIONS: 1 x ABRASIVE BELT AND 1 x TOP BRUSH UNIT Machine made of stress-relieved steel welded construction for stable and rigid structure. Worktable with motorized height adjustment via 4 synchronized spindles. Independent drive motors for each working station. Extraction hoods inside the machine, one per station. Touch screen for * Automatic star-delta switching of main motors * Analog ammeter for each station * Digital sheet thickness display with decimal point tolerance * Material thickness setting (+/- 0.1 mm) * Machine status monitoring with alarm messages FEED SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt available on request. Variable feed speed via frequency inverter, 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant. Automatic conveyor belt centering. Side guides to prevent the belt from lifting. Rubber pressure rollers before and after each station, oil and temperature resistant. Idler rollers at the front and rear of the table. 1st WORKING STATION – R Balanced contact roller, anti-oil and anti-heat nitrile rubber coating. Adjustable via eccentric shaft for working position and compensation of abrasive belt wear. Pneumatic cylinders for automatic engagement in working position and lifting during emergency stop. Abrasive belts and/or Scotch-Brite can be used. Motorized adjustment and electronic control of contact roller height. Variable-speed motor with automatic emergency brake. Pneumatic belt tensioning system. Abrasive belt centering system with electronic photo cell. Bsdpfxsynmwks Acmslh Oscillation adjustment for width and timing. Contact roller adjustment precision: ±0.02 mm Contact roller adjustment speed: 10 m/min Contact roller diameter: 180 mm Rubber roller hardness: 55 Shore Contact roller stroke (grit adjustment) up/down: 8 mm Abrasive belt speed: 3 – 18 m/s Motor power: 11 kW 2nd WORKING STATION – X 2 rows of vertical brushes, 10 rotating clockwise and 10 counterclockwise Oscillating cross movement of the whole group Quick-change system for brushes Brush diameter: 115 mm Number of brushes: 20 pcs Oscillation stroke: 15 mm Rotational motor power: 5.5 kW Rotational speed: 300 – 1000 rpm Oscillation motor power: 0.37 kW Abrasive brush speed: 10.0 m/s OPTIONS AND ACCESSORIES B Group – External horizontal drum brush Ø 150 mm over Scotch-Brite brush: €5,580.00 over wire brush 0.3 mm: €5,900.00 R Group – ABRASIVE BELT Motor 15 kW: €1,060.00 OPTIONS: Return to Sender system (workpiece is discharged to the front): €1,290.00 Conveyor belt with vacuum system, 300 mm wide, 4.0 kW: €4,780.00 2 additional PVC-coated rollers at infeed and outfeed sides: €2,040.00 Tampico brush system for component cleaning, 0.55 kW, Ø 150 mm: €4,5...

Stanje: zelo dobro (rabljeno), Leto izdelave: 1974, Funkcionalnost: popolnoma funkcionalen, Manufacturer: WMW GLAUCHAU Model: SIP 400x500 Year of manufacture: 1974 Total power requirement: 12 kW Control: conventional Machine weight: 5,900 kg Space requirement (mm): 4,000 x 1,780 x 2,400 Swing diameter: yes Internal diameter: 800 mm Grinding depth: up to approx. 500 mm Table stroke: 800 mm Distance: from workpiece spindle head Grinding diameter: in workpiece guard Adjustment: of internal grinding device Delivery time: short-term Price: On request Machine type: Internal and face grinding machine 1 piece internal cylindrical grinding machine with face grinding device SIP 400 x 500 special version with enlarged swing diameter and extended hydraulic cross-slide reconstructed and modernized at the manufacturer’s Glauchau works 1. TECHNICAL DATA 1.1 Working range Internal grinding min./max. (mm): 30 / 630(800) Bljdpsy Rh D Ssfx Acmeh External grinding, max. (mm): 800 Workpiece diameter, max. (mm): 800 In workpiece guard, max. (mm): 800 Without workpiece guard, approx. (mm): 850 Up to grinding spindle housing, max. (mm): 1,225 On the table, max. (mm): 545 1.2 Workpiece spindle headstock Cross-slide travel, max. (mm): 650 Cross adjustment via gear motor and positioning device Swivel, max. (degrees): 15 Workpiece spindle Speeds (rpm): 16/22/32/45/63/90/125/180/250 Load capacity, max.: 1,000 kg Spindle head (with bayonet flange) DIN 55021 size 11

Stanje: rabljeno, Wide Belt Sander Used Make: TimeSaver Model: WRB Series Machine No. 2480-19 Dry-working deburring/edge rounding machine with contact rollers and a rotary brush unit Max. working width: 1350 mm Abrasive belt dimensions (W x L): 1350 x 1900 mm Brush outer diameter: 530 x 350 mm Table opening: 0.8–100 mm Min. part size: 50 x 50 mm Brush speed: 6–17 m/sec Abrasive belt speed: 11 m/sec Feed speed: 0.2–8 mm/sec Power consumption: Unit W: 11.0 kW Unit RB: 1.5 kW Brushes: 4 x 1.5 kW Connection: 400 V, 50 Hz Compressed air required: 6 bar Total consumption: 25 l/min Including ceramic brush set R plus 350 x 530 mm and zirconium brush set, grit 180 Machine has been completely overhauled (refurbished) New conveyor belt installed Bjdpfjudb R Isx Acmelh Application Area: Abrasive belt roller unit W: Pre-deburring with abrasive belt or Scotch-Brite belt Removal of heavy burrs Applying a sanding or brush finish Repairing a sanding or brush finish RB unit: Deburring and edge rounding of flat and contoured parts Weight: 6,200 kg

Leto izdelave: 2015, stanje: dober (rabljeno), Deburring machine, used Manufacturer: NS Maquinas Industrial Model: DM 1600 DC Year of manufacture: 2015 Working width: 1600 mm Minimum part size: 50x50 mm Bsdpfx Ajikm Tkscmjlh Power: 8 kW Number of cross-belt stations: 1 Cross-belt speed: 2–8 mm/s Feed speed: 0.6–3.2 mm/s Extraction unit: Donaldson Performs edge rounding and removes sharp edges on both external and internal contours of parts made from stainless steel, steel, or aluminum, which have been cut by a laser, shear, or punching machine. Dimensions: 2730x1740x1940 mm Weight: 1790 kg.

Stanje: rabljeno, Leto izdelave: 2009, Maximum internal grinding diameter: 600 mm Maximum external grinding diameter: 800 mm Control system: Siemens Sinumerik 840 D Maximum internal grinding depth: 800 mm Maximum external grinding length: 600 mm Bsdpfx Acewp S Tnemelh Variable speed range: 1–795 rpm Maximum workpiece length: 800 mm Workpiece spindle unit (U/B1/L adjustment): - Travel distance (U-axis): 300 mm - Swivel angle (B1-axis): -0.5°/+12° - Workpiece spindle drive power: 8.5 kW - Infinitely variable speed range: 1–795 rpm - Setup speed (jog mode): 10 rpm - Spindle head size: A 8 in accordance with DIN 55026 - Through bore: 58.5 mm - Maximum workpiece diameter: 830 mm - Maximum workpiece length (between centers or floating mount): 800 mm - Maximum spindle head load capacity: 6100 N Internal grinding device (Z1/X1/B2): - Travel distance (Z1-axis): 1100 mm - Travel distance (X1-axis): 150 mm - Swivel angle (B2-axis): 270° - Manual longitudinal adjustment of internal grinding axis on table: 780 mm - Internal grinding spindle drive power (infinitely variable): Belt-driven grinding spindles: 7.5 kW - Grinding head mounting bore (diameter): 100 mm / 125 mm - Grinding head mounting length: 220 mm - Maximum grinding diameter: 600 mm - Maximum grinding depth: 800 mm External and face grinding device (Z2/X2): - Travel distance (Z2-axis): 800 mm - Travel distance (X2-axis): 470 mm - Swivel angle (B2-axis): 270° - External grinding spindle drive power: 7.5 kW - Grinding head mounting bore: Ø 140 mm - Maximum grinding diameter: 800 mm - Maximum grinding length: 600 mm - Grinding wheel dimensions: max. Ø 450 x 50 x Ø 127 mm Equipment/accessories: - Various grinding spindles - Various flanges / grinding wheel mounts - Various clamping jaws - Coolant system - Oil mist separator - Cooler - Technical documentation

Stanje: rabljeno, Stroj pripravljen za delo, zmogljivost 2000 kg/uro. Vključuje tri vrste sit, stroj ima vgrajen predhodni drobilec zamrznjenih izdelkov. Namenjen za zamrznjeno sadje: črni ribez, rdeči ribez, kosmulje, slive. Oglejte si tudi moje druge oglase. Bljdpfey Imymox Acmoh

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 84659300, Stroj je sestavljen iz 3 delovnih enot: Blodpfx Ajxn Ifuscmsh 1. XSV ščetke (12 rotirajočih in nihajnih ščetk) 2. XSV ščetke (12 rotirajočih in nihajnih ščetk) 3. Valjasta ščetka Dovajalni trak 1350 mm.

Stanje: rabljeno, Leto izdelave: 1998, Technical data: Grinding area (incl. 50 mm grinding wheel width): 700 x 320 mm Grinding height: 400 mm Longitudinal stroke: 740 mm Cross stroke: 270 mm Table clamping surface: 1000 x 250 mm Distance table to spindle center: 650 mm Table load, max.: 400 kg Stepless spindle drive: 6 kW Max. grinding wheel dimensions: ø300 x 60 x 127 mm Bsdpfx Acjxvy Hgsmelh Coolant system: 170 l Total weight (complete equipment): 4600 kg Features: - Fully electronic multi-axis control system, Brand NE (manufacturer: Schleier) - Brushless AC servo and spindle drives - Manual feed of the numerically controlled axes via movable electronic handwheel; axis selection; rapid traverse +/-; digital increment display integrated into the handwheel - Free-standing electrical cabinet incl. operating hours counter - Cooling unit - Automatic central lubrication system - Enclosed work area - Oil catch trays - CE marking Accessories: - 6 x grinding wheel flanges incl. grinding wheels - 3 x grinding wheel flanges - 1 puller device for grinding wheel flanges - 1 balancing arbor - 1 set of leveling pads and screws - Extraction unit - Raised vertical column for extraction unit

Stanje: rabljeno, DVS UGRIND 800 je CNC notranji in zunanji brusilni stroj, zasnovan za preciznost, visoko natančnost in zanesljivost. Obdelovanec Ø 130–500 mm; Z 1200 mm, X 250 mm. Motor brusilnega vretena 25 kW; motor vretena obdelovanca 24 kW; brezstopenjsko nastavljive vrtljaje 0–500 min⁻¹; priključek 50 Hz 3x 400 V; teža ~7000 kg; mere D2850׊2490×V2290 mm; obratovalni čas 12000 ur. Oprema: hladilna naprava, filtrirna enota za hladilno sredstvo, merilna sonda, set notranjih brusnih čepov, set prirobnic, osvetlitev, orodjarna, elektronski ročni impulzni dajalnik. Omogoča tesne tolerance; tipične uporabe: avtomobilska industrija, strojništvo, letalstvo, medicinska tehnika, urarska industrija. Bedpfeyxnuajx Acmolh

Stanje: dober (rabljeno), Tool sharpening machine with wet grinding. Bledpfx Asich Elocmeh

Stanje: novo, Leto izdelave: 2026, Max. Durchlassbreite: 1350 mm Bearbeitbare Blechstärke: 0,5 - 80 mm Vorschub stufenlos: 0,5 - 6 m / min Länge: mm Breite: mm Höhe: mm Gewicht Maschine : kg Standardausstattung 3-Stationen-Anlage: 1. Station: Hammerstation zur Schlackeentfernung 2. Station: Schleifband 3. Station: Bürstelemente zum Kantenverrunden Vier-Säulen-Synchronhub, rollende Bürstenposition unabhängig vom Hub Bledpfx Acsx S Dxbsmjh Hub-Servosteuerungsgenauigkeit 0,01 chine NC PLC Touchscreen-Einstellung der chine mit Nassstaubsauger Zusatzausstattung Optionaler Zuführmodus: 1. Zuführung mit starkem Permanentmagnet-Adsorptionstransport (geeignet für Werkstücke aus Karton. Werkstückgröße ≥ 30 mm × 30 mm) 2. Zuführung mit Vakuum-Unterdruck-Adsorptionstransport (geeignet für Edelstahlplatten, Kupferplatten, Aluminiumplatten usw.), die nicht magnetisch adsorbiert werden. Werkstückgröße ≥ 50 mm × 50 mm)

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AA0985, vhodna napetost: 400 V, KALIBRIRNI IN BRUSILNI STROJ GOR-DOL SAC MOD. 4R 300 – V SKLADU S CE - Delovna širina 300 mm - Največja višina 150 mm - Najmanjša višina 5 mm - Najmanjša dolžina kosa 240 mm - 2 zgornja valja – premer 254 mm - 1 zgornja krtača - 2 spodnja valja – premer 254 mm Bjdox Riccepfx Acmolh - 1 spodnja krtača - Podajalna hitrost 4–16 m/min - 4 motorji po 4 kW vsak - Napetost 400/50 - Serijska številka AA0985 - Leto izdelave 2001

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Splošni podatki Bjdex D Sbxopfx Acmolh Mere širina 1400 mm Mere globina 3100 mm Mere višina 1800 mm Teža stroja 2300 kg Glavni pogon Območje vrtljajev vretena 1415 min⁻¹ Največja debelina pločevine 20 mm Stroj za odstranjevanje robov LISSMAC SBM-M 1500 B2 je bil izdelan leta 2014. Namenjen je učinkovitemu odstranjevanju robov ter zagotavlja dosledno kakovost in zanesljivo delovanje. Izkoristite priložnost za nakup stroja LISSMAC SBM-M 1500 B2. Za več informacij nas kontaktirajte. Vrste uporabe Druga oprema za obdelavo pločevine