Pmh Gmbh Ex 30 nakup rabljenega (84.017)

Leto izdelave: 1983, stanje: pripravljen za uporabo (rabljen), Was used for reworking profile rolls for a hot rolling mill, was regularly maintained, includes accessories, without spare parts, on-site inspection is possible, no videos available. Bledpfx Asriwfiea Rji

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), Max. bending diameter: 30 mm, on-site inspection is possible. Bledpfx Asrc Hiiea Rsi

Leto izdelave: 1992, stanje: rabljeno, Plate heat exchanger for milk processing Bodpfx Aeh Eulgoa Roli

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), CTS Model: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control: 32-bit controller LCD control panel Digital display of set and actual values Numeric entry of set values Clear-text error messages RS 232 interface Free switching channels for customer-side test specimen control Temperature tests: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Heat radiation: approx. 1000 W at +20°C, approx. 200 W at -25°C Nitrogen inertization with residual oxygen monitoring: With nitrogen inertization, the test chamber is initially purged with a large amount of N₂ until Bedjzd Rzwjpfx Aa Roli the oxygen content drops below 3%. Then it switches to a base flow (approx. 10% of the full purging amount). The baseline nitrogen flow is measured with a flow meter, displayed, and monitored via a limit switch. O₂ monitoring continuously extracts gas from the test chamber via a flame arrestor and channels it over an O₂ sensor to monitor the residual oxygen content in the extracted air. After measurement, the gas passes through a second flame arrestor back into the test chamber. The exhaust pump is monitored by a flow meter. Further details can be found in the user manual by Dräger in the appendix. Note: The gas system is currently out of service! The technical data refer to an ambient temperature of +25°C, rated voltage of 400V, without test material, without radiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 21.6 kW Nominal current: 36.5 A Protection rating: IP 54 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level:

Stanje: dober (rabljeno), For sale: depth gauge from the renowned manufacturer Mahr, model EX 30. Condition: very good. Bledpfeu Swkcox Aa Roi

Stanje: dober (rabljeno), Proizvajalec: Rhein-Nadel Automatisation GmbH Tip: SRC-N 630-1 R Bledpfxsgth U Is Aa Rei Frekvenca vibracij: 50 Hz / 3000 min⁻¹ Električna moč: 220 V Premer bobna: 900 mm Nastavljive vibracije

Stanje: dober (rabljeno), Leto izdelave: 2003, Filtration is performed by an internal filter unit - Manufacturer: Atlantik GmbH - Model: 30.701.31.15100 - Operating pressure: 10 bar Bodpjiw Eafsfx Aa Rjli - Filtered particle size: 6.0 µm (microns) - Dimensions: 1050 x 1150 x 1620 mm - Capacity: 425 l - Electrical specifications: 250 V, 5 A, 50/60 Hz - Year of manufacture: 2003

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, številka stroja/vozila: Drymex S 5, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 8.286 h, Čudovita, stabilna sušilna naprava, sestavljena iz 2 agregatov in ene velike sušilne kabine iz nerjavečega jekla s perforiranim dnom, vključno s cevnim sistemom in parnim čistilcem Blue Evolution XL podjetja Beam. Idealno za nežno sušenje živil (zelišča, čaj, pšenična trava), nizkotemperaturno sušenje z elektriko (pod 40°C), dovoljeno samo za uporabo v notranjih prostorih. Posamezne segmente perforiranega dna je mogoče posamezno dvigniti (čiščenje). Top stanje, zelo solidna izdelava. Dimenzije: agregati – 1,95 x 1,25 x 2,00 m, sušilna kabina: 7,40 x 2,67 x 2,50 m. Nerjaveče jeklo: 1.4301. Bledjyffqqepfx Aa Roi Agregat 1: leto 2012, agregat 2: leto 2014, sušilna kabina: leto 2015. Cena po dogovoru.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna širina: 600 mm, skupna dolžina: 1.200 mm, skupna višina: 2.300 mm, skupna masa: 150 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, delovno območje: 400 mm, višina izdelka (maks.): 30 mm, trajanje garancije: 12 meseci, model krmilnika: SPS-Steuerung Siemens Simatic HMI, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, natančnost pozicioniranja: 1 mm, Oprema: CE označba, dokumentacija / priročnik, osvetlitev, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph Bljdpoyycqxsfx Aa Rsi • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, skupna masa: 160 kg, skupna dolžina: 1.300 mm, skupna širina: 800 mm, skupna višina: 1.930 mm, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, valovna dolžina laserja: 10.600 nm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: CO₂ laser, Oprema: osvetlitev, The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks, without extensive programming knowledge. After prior setup, the software independently increments serial and article numbers. Furthermore, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined areas. The use of a handheld scanner is also possible. A laptop including a mounting bracket with a Windows operating system is included as standard equipment. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. Additional options, such as side-mounted supports for marking long components, are also available. 60 Watt CO2 laser (optional: 30 W) • Wavelength: 10,640 nm • Marking field size: 220 x 220 mm • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction system (including activated carbon filter) • Optional: Supports for large workpieces (also on both sides) • Marking software EZCAD in German / English • Pilot laser (simple preview, contour preview) • Focus finder (simple focus adjustment) • Max. component height: approx. 300 mm • Electrically adjustable Z-axis Bsdpfxswkpyho Aa Rjli • Laptop including mounting bracket with Windows operating system • Frame made of aluminum profile • Air-cooled • Door width: approx. 720 mm / Door height: 400 mm • Connection: 230V • Dimensions: approx. 1000 x 800 x 2000 mm (L x W x H) • Weight: approx. 160 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 900 mm, skupna širina: 1.550 mm, skupna višina: 1.900 mm, vhodna napetost: 230 V, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, Laser for Product Marking - The universally applicable laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking tasks. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 Watt fiber laser. For permanent marking, the use of a laser is essential in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos in just a few clicks, without extensive programming knowledge. Serial and article numbers can be auto-incremented by the software after initial setup. In addition, the software can automatically extract variable data (such as drawing numbers, project names, etc.) from existing tables and insert it into predefined fields. Use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, a movable Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser: 30W, 20W, or 50 Watt • Laser class 1 • Wavelength: 1064nm • Marking area: 150x150mm (optionally larger) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance measurement • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal lamp to indicate operating status • Max. component height: approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touch screen and height-adjustable keyboard tray • Frame made of aluminum profile Bledpfjunh H Sox Aa Rsi • Air-cooled • Door width approx. 700mm / Door height (pass-through): 400mm • 230V connection • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, TRUMPF Hüttinger GmbH + Co. KG RF generator 13,56 MHz, 20 kW, 1880203, TruPlasma RF 3020 Model: 1880203 Tip: TruPlasma RF 3020 Tehnični podatki: 400V-480V 50/60Hz 41,8A-34,5A Bodpfouykf Aex Aa Roli 20 kW

Stanje: rabljeno, 8113-000001b / 8113000001b, TF20.25-16B4 / TF202516B4, Oswald Elektromotoren GmbH synchronous motor 47 kW, 500 Nm, S1 Bjdeq S Tdyspfx Aa Rsli Model: 8113-000001b Condition: Used

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 45 h, številka stroja/vozila: 202023-062, Multifunkcijski CAM sistem za razrez v tehnologiji čiste vodne rezalne brizge – brez abrazivov (vodorezni stroj / naprava za vodno rezanje). Bjdpfx Ajwrn Iyja Rsli 2 rezalni mostovi z 2 rezalnima glavama vključno z Z-osjo 1 glava za 2D razrez 1 glava za 2D razrez Za razrez pene, plastike, tehničnih tekstilij in drugih ploščatih, fleksibilnih, nemetalskih materialov. Največja višina prehoda: 140 mm Rezalen površina v X in Y: 2850 mm * 2750 mm Zaščitni razred: IP54 vklj. visokotlačna črpalka BFT 40.22 (pribl. 650 delovnih ur) (Fotografija izdelka kot primer) Stroj je CE-certificiran.

Stanje: rabljeno, Leto izdelave: 2026, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026-078, delovna širina: 1.600 mm, delovna višina: 100 mm, največja širina rezanja: 1.600 mm, število mest v zalogovniku orodij: 2, Used CNC Cutter/Plotter Cutting area in X and Y: 1,500 x 1,600 mm (demonstration machine) Multifunctional CAM cutting system utilizing CNC knife technology for 2D cutting of paper, cardboard, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid non-metallic materials. Equipment included with the used machine: • 1 cutting gantry and 1 multifunctional tool head • Multifunctional tool head for mounting 2 interchangeable tools • Powerful vacuum blower for material fixation • Standard equipped with a grey conveyor belt table • Maximum material height: 100 mm Additional tool options available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT powered rotary knife • UCT universal knife (drag knife) • KCT kiss-cut tool • CTT creasing tool • V-Cut angled cutting knife • Printer mark recognition • Camera registration • Punch tool for notches or holes • Router with extraction unit Bodpfx Aaowgc I Rj Rjli User-friendly design: • Easily exchangeable cutting tools, "PLUG & CUT" • Intuitive user interface • Quick blade change • Vacuum zones can be activated with one click Rapid return on investment: • Low operating costs with high added value • Optimal material utilization with nest expert software modules (not included) • High-speed performance • Consistent precision Technical data: • Short cutting times due to high positioning speed up to 90 m/min • Repeatability: +/- 0.25 mm • Single or multi-layer cutting • Suitable for both sheet and roll materials (expandable with roll off unit) • Fast return on investment (Product image for reference) The machine is CE-certified.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, S&F Drum Chipper Type ATH 220x530/3 Demonstration / Trade Show / New Machine Robust construction for long service life Infeed height: 200 mm Infeed width: 500 mm Number of chipping knives: 2 pcs Number of counterknives: 1 pc Rotor diameter: 520 mm (solid steel rotor) Number of infeed rollers: 3 pcs Bedow I R Rnjpfx Aa Rsli Throughput capacity: up to approx. 20 stacked cubic meters/hour* Chip length: approx. 30 mm Chipper drive power: 45 kW or as agreed Infeed roller drive power: 2 x 2.2 kW Operating/control voltage: 400/220 V, 50 Hz Weight: 2,600 kg *Depending on chip length, main motor kW, number of knives, and infeed method S&F chippers and drum chippers with horizontal infeed are used in many sectors of the wood processing industry (sawmills, timber plants). The “ATH” series chippers produce high-quality, homogeneous wood chips with low fines content from wood residues, e.g., as premium chips for the pulp industry or as fuel chips for energy generation. Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible application - Custom manufacturing Do you need further information? Contact us! We are happy to advise you. Drum Chipper | Wood Chipper | Chipper | Chipping Machine | Wood Chipping Machine | Shredder | Wood Shredder

Stanje: novo, Leto izdelave: 2026, Drum Chipper Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chipping machines and drum chippers with horizontal feed are widely used throughout the wood processing industry (sawmills, timber plants). Chippers of the "ATH" series produce high-quality, homogeneous wood chips from residual timber with a low proportion of fines—for example, as premium chips for the pulp industry or fuel chips for energy generation. Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 units - Number of counter knives: 2 units - Rotor diameter: 520 mm - Number of feed rollers: 3 units - Throughput capacity: up to approx. 40 loose cubic meters/hour * - Chip length: 5 - 50 mm - Main drive power: 22 - 110 kW - Feed roller drive power: 2 x 2.2 kW - Operating/Control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *Depending on chip length, kW of main motor, number of knives, and material feed. Advantages: - Maximum throughput - Low fines content - Low-maintenance - Versatile application - Custom manufacturing Need more information? Bledpfxjwbv Ere Aa Rji Contact us! We are happy to advise you. Drum Chipper | Wood Chipper | Chipper | Chipping Machine | Wood Chipping Machine | Shredder | Wood Crusher

Stanje: novo, Leto izdelave: 2026, Drum Chipper Series ATH 300 S&F chippers and drum chippers with horizontal feed are used in many sectors of the wood processing industry (sawmills, wood factories). Chippers of the "ATH" series produce high-quality, homogeneous wood chips with a low proportion of fines from residual wood, e.g. as premium wood chips for the pulp industry or as fuel chips for energy generation. Series ATH 300 Blodeuz Hmxspfx Aa Rji - Infeed height: 300 mm - Infeed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pcs - Number of counter knives: 2 pcs - Rotor diameter: 700 mm - Number of feed rollers: 3 pcs - Throughput capacity: up to approx. 70 cubic meters/h * - Chip length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Feed roller drive power: 2 x 3.0 kW - Operating / control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chip length, main motor kW, number of knives, feeding Advantages: - Maximum throughput - Low proportion of fines - Low maintenance - Versatile applications - Custom manufacture Do you need more information? Contact us! We are happy to advise you. Drum chipper | Wood chipper | Chipper | Chipping machine | Wood chipping machine | Shredder | Wood crusher

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 13.000 h, Funkcionalnost: popolnoma funkcionalen, Pfeiffer Vacuum GmbH Turbomolecular Pump with Drive Electronics, Profibus DP Gateway and Accessories, PM P03 020 G, TPH 2101 P + TIC 250 Turbopump Model: PMP03020G, TPH2101P Gateway Model: TIC250 Turbomolecular Pump Specifications: Serial Number: 14219214 Year of Manufacture: 2008 Inlet Flange Size: DN 250 ISO-K Outlet Flange Size: DN 40 ISO-KF Purge Connection: G1/8" Nominal Speed: 31,500 rpm (525Hz) Pumping Speed for N2: 1,900 l/s Max. Backing Pressure for N2: 1.5 mbar Max. Backing Pressure for He: 1.0 mbar Max. Backing Pressure for H2: 0.5 mbar Oil: PM 016 144-T Condition Notes: 1. Operating hours are approx. 13,000h with about 1,600 start-stop cycles. Bledpfx Aaencd S Us Roi 2. Process gases: Nitrogen and Argon 3. Process dusts: Chromium nitride and steel 100Cr6 4. The pump was stored fully functional in 2018 and externally cleaned.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Predmet ponudbe je kompaktni stroj za deljenje in oblikovanje žemelj Mini Rex Futura, ki se odlikuje po visoki zmogljivosti in širokem razponu teže ob ohranjanju visoke kakovosti obdelave testa. OPIS NAPRAVE Stroj za deljenje in zaokroževanje žemelj Mini Rex Futura, letnik 2011. Bodpfx Asy Angqoa Rjli Ročni vnos testa v lijak Dvo-vrstno delovanje Ročno prevzemanje izdelkov s transportnega traku Zmogljivost: 33 ciklov/min; 3960 kosov/uro Razpon teže: L: 25g – 75g ; H: 70g – 140g Kontrolna plošča Testo: pšenično, graham, kvašeno, krofi Enoosebno upravljanje Mere stroja (v x d x š): 1800 x 1770 x 650 mm Rok dobave: prenova zaključena, naprava je pripravljena za prevzem. Pišite nam in poslali vam bomo cenovno ponudbo ter več podrobnosti.

Stanje: delavnici obnovljeno (rabljeno), Modernized machine with new LTG control system StoreControl L Currently, 6 identical machines available External dimensions: Building height: 4,889 mm Building width: 2,785 mm Building depth: 2,810 mm Total machine load capacity up to 2 x 15,000 kg 63 carriers with central web, each with up to 400 kg load capacity Clear usable dimensions per carrier: Width = 2,460 mm Depth = 825 mm Usable height from 55 up to 750 mm Operator opening starts at 875 mm above finished floor level (OKFF), opening height 875 mm Motor power ratings: Vertical drive: 6 kW / 400 Volt Horizontal drive: 0.55 kW / 400 Volt Colour scheme: grey/blue Bledpfsd Sphisx Aa Rji Surface cleaned, signs of use possible Subject to errors and technical modifications, or detail deviations in photos. Delivery and installation currently primarily in Germany, Austria, and several neighbouring countries.

Stanje: rabljeno, Leto izdelave: 2026, obratovalne ure: 15 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 204065, skupna širina: 2.900 mm, skupna višina: 3.300 mm, Rabljeni stroj CNC-rezalnik/plotter, rezalna površina v X in Y: 2.500 x 2.100 mm. Multifunkcijski CAM-rezalni sistem s CNC-rezilno tehnologijo za 2D rezanje usnja, tkanin, tehničnih tekstilij, pene in drugih ploščatih, polfleksibilnih ali togih, nemetalnih materialov. Oprema rabljenega stroja: • 1 rezalni most in 1 večnamenska nosilna glava za orodja Stroj se prodaja z motornim krožnim nožem, električnim oscilacijskim nožem in rezkalnikom (vključno z odsesovalno napravo). • Večnamenska glava omogoča uporabo do 3 zamenljivih orodij • Zmogljiv vakuumski ventilator za fiksiranje materiala • Standardno opremljen s sivo transportno mizo (trakasti transporter). Po želji možen zamenljiv zeleno-modri transporter (nudi visok kontrast za temnejše materiale). Možnost dodatne opreme (po povpraševanju): Bljdpeif Ek Rjfx Aa Rji • EOT električni oscilacijski nož • POT pnevmatski oscilacijski nož • PRT motorni krožni nož • UCT univerzalni (vlečni) nož • KCT Kiss-Cut orodje • CTT utorni valj • V-Cut kotni rezalni nož • Prepoznavanje tiskarskih oznak • Kamera za registracijo • Prebijalno orodje za zareze ali luknje • Rezkalnik z odsesovalno napravo Enostavna uporaba • Enostavna menjava rezalnih orodij, "PLUG & CUT" • Intuitiven uporabniški vmesnik • Hitra menjava rezil • Vakuumske cone se aktivirajo s klikom Hitro povračilo investicije • Nizki stroški pri visoki dodani vrednosti • Optimalen izkoristek materiala s programsko opremo nest expert (ni vključena v obseg dobave) • Visoka hitrost • Konstantna natančnost Tehnični podatki: • Kratki časi rezanja zaradi visoke pozicijske hitrosti do 90 m/min • Ponavljiva natančnost +/- 0,25 mm • Reže enoslojno ali večslojno • Primeren za pločevino ali kolute (možna nadgradnja z ustreznim odvijalcem) • Hitra amortizacija (Slika izdelka je simbolična) Stroj je CE-certificiran.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, obratovalne ure: 15 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2002-045, skupna širina: 2.900 mm, skupna dolžina: 3.300 mm, Rabljeni stroj CNC-rezalnik/plotter, rezalna površina v X in Y smeri: 2.500 x 2.100 mm Večnamenski CAM sistem za razrez v CNC tehnologiji nožev za 2D-rezanje usnja, tkanin, tehničnih tekstilij, pene in drugih ploščatih, pol-fleksibilnih ali togih, nemetalnih materialov. Oprema rabljenega stroja: • 1 rezalni most in 1 večnamenska orodna glava Stroj se prodaja s CCD kamero za prepoznavanje tiskarskih oznak • Večnamenska orodna glava za uporabo 3 izmenljivih orodij • Zmogljiva vakuumska enota za fiksiranje materiala • Standardno opremljeno s sivim tekočim transportnim trakom (conveyor) • Možen zeleno-moder transportni trak kot menjava (nudi visok kontrast za temnejše materiale) Blsdpfx Aefnlkwja Roi Možnost dodatnih orodij (na zahtevo): • EOT električni nihajoči nož • POT pnevmatski nihajoči nož • PRT pogonski krožni nož • UCT univerzalni vlečni nož • KCT orodje za „kiss-cut“ razrez • CTT orodje za utore • V-Cut kotni nož • Prepoznavanje tiskarskih oznak • Kamerni registracijski sistem • Orodje za izbijanje zarez ali lukenj • Rezkar z odsesovalno enoto Uporabniku prijazen: • Enostavno zamenljiva rezalna orodja, „PLUG & CUT“ • Intuitiven uporabniški vmesnik • Hitra menjava rezil • Aktivacija vakuumskih con z enim klikom Hitra donosnost naložbe: • Nizki stroški pri visoki dodani vrednosti • Optimalno izkoriščanje materiala z nest expert programskimi moduli (niso vključeni v opremo) • Visoka hitrost • Konstantna natančnost Tehnični podatki: • Kratki časi rezanja zaradi velike pozicijske hitrosti do 90 m/min • Ponovljivost +/- 0,25 mm • Možnost rezanja eno- ali večplastno • Primeren za rezanje plošč in materialov iz role (možnost razširitve z ustreznim odvijalcem) • Hitra donosnost naložbe (Fotografija izdelka je zgolj primer) Stroj je CE-certificiran.

Stanje: dober (rabljeno), Leto izdelave: 2010, Used heatable/coolable vacuum/pressure vessel with agitator Previous application: Pharmaceuticals, Cosmetics Item number: 10816 Volume: 1,410 liters Design: suspended Product contact material: 1.4571 / AISI316 Execution: with double jacket Operating pressure (according to nameplate): +1/+3 bar Max. operating temperature: 0/+150 °C Tank dimensions: Manhole: 500 mm External diameter: 1,320 mm Total height: 1,530 mm Overall width: 1,780 mm Cylindrical height: 1,230 mm Blsdporz Nnbjfx Aa Rei Materials: Internal: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Features: Nameplate: Yes Agitator Spray head Nozzle Empty weight: 955 kg

Stanje: dober (rabljeno), Manufacturer: LuT Metalltechnik GmbH Model: LTP 1300/1300 Rotor diameter x width: 1,300 x 1,300 mm Inlet size: 1,360 x 1,000 mm Included: – 160 kW drive – Control cabinet with soft starter New spare parts in stock. Crusher can be sandblasted and painted. Manufacturer: LuT Metalltechnik GmbH Blodpfxowu Uqyo Aa Rei