Ovitjevalec Palet Z Odprtim Vrtljivim Krožnikom nakup rabljenega (47.638)

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm long Manual rope forming attached to the frame for pallet reinforcement TECHNICAL DETAILS: Low-profile turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed, up and down Audible signal at cycle start and stop Emergency stop button in accordance with CE regulations Turntable always stops at same home position Carriage anti-fall safety device Push buttons for machine on/off, start/stop & reset according to CE standards, Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F00 - Display/program change lock F02 - Infinitely adjustable turntable speed, 5–12 rpm Carriage speed up and down adjustable independently F03 - Carriage speed upwards: 1.3 to 5.4 m/min F04 - Carriage speed downwards: 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10) F06 - Number of wraps at pallet top (1–10) F09 - Delay on photocell for wrapping height F13–F16 - Film tension (base/top wraps and up/downwards) independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS 6 storable wrapping programs F01-1 - Cross wrapping (up/down) F01-2 - Simple wrap (up only or down only) F01-3 - Push button for manual functions F10/F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to preset height (with photocell deactivated) F22/F23 - Wrapping cycle for top sheet film F29 - Soft-start cycle for edge protection application Cedsykucmepfx Aplsrb F30/F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft-start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set at 200% Film tension electronically controlled through control unit Film specification: max. outer diameter Ø250 mm, height = 500 mm, core Ø76 mm Standard connection: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratios of 150% / 250% / 300% available Further units available from stock in Ludwigsburg.

Leto izdelave: 2021, obratovalne ure: 10 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S21MythoEasyLow04, Ex-demo machine - like new. MYTHO EASY Low Very low-profile unit Csdpjx Ta Nxsfx Aplsrb Wrapping height: 2400 mm Turntable: 1650 mm LP flat turntable: 30 mm low – 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double roping system – see pictures. Automatic film cutting Optional: film clamp on turntable German Schuko plug 6 individually programmable settings Additional demonstration units available from stock for immediate delivery. Prices ex stock Ludwigsburg.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Crodpfoykud Rox Aplob Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Lybra04, Exhibition unit - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2,200 mm Max. pallet size: 1,200 x 1,200 mm Codpfx Aoykubijplsrb Rotating arm with high-resistance ball bearing Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed, upward/downward adjustable Acoustic signal at wrap start and cycle end Emergency stop switch according to CE regulations Positioning aid for correct pallet placement included Safety bumper for collision protection Pushbuttons for machine power-on and start & stop function as per CE standards, Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F02 - Steplessly adjustable turntable speed 5–12 rpm Carriage speed upwards & downwards can be set independently F03 - Carriage upward speed from 1.3 up to 5.4 m/min F04 - Carriage downward speed from 1.3 up to 5.4 m/min F05 - Number of wraps at pallet base (1-10 wraps) F06 - Number of wraps at pallet top (1-10 wraps) F09 - Photocell wrap height delay F62 - Ergonomically settable height for film change ADJUSTABLE WRAPPING PROGRAMS AT CONTROL PANEL 3 programmable wrapping programs F01-1 - Cross wrapping (upwards/downwards) F01-2 - Single wrap (only upwards or only downwards) F01-3 - Pushbutton for manual functions F12 - Wrap to a preset height (with photoelectric sensor deactivated for height) F22/F23 - Wrapping cycle for top sheet application F29 - Soft start cycle for applying edge protection Soft start cycle reduces film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE Electromagnetically braked roller Film specification: Max. external diameter Ø 250 mm – Core Ø76 mm – Height = 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW/6A – 1.75 kW/8.5A (with PRS/PS) Manual rope-forming device available as an option. Several more systems available from stock in Ludwigsburg for immediate delivery.

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Credpfx Ajyktrtjpljb Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm in length TECHNICAL DETAILS: Turntable, LOW PROFILE · Height: 25 mm · Maximum pallet dimensions: 1000 x 1200 mm · Maximum load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection by light sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable for upward/downward movement Signal tone at wrap start and end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push buttons for machine power on, start & stop function, and reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program changes F02 – Infinitely variable turntable speed: 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward: 1.3 to 5.4 m/min F04 – Carriage speed downward: 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photo sensor delay for wrapping height F13–F16 – Film tension for foot & head wrapping / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01-1 – Cross-wrapping (upward/downward) F01-2 – Simple wrapping (up only or down only) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop height F12 – Wrapping to a preset height (deactivates light sensor height detection) F22/F23 – Wrapping cycle for top sheet film F29 – Soft-start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle by push button FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film tension electronically controlled via control unit Film specification: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection values: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Crodpfxjykuiaj Aplob Optional: Gear for OPRS pre-stretch ratio of 150% / 250% / 300% available Additional units available from stock in Ludwigsburg.

Stanje: rabljeno, Leto izdelave: 2013, številka stroja/vozila: 448582, skupna masa: 991 kg, nosilnost: 1.700 kg, tip motorja: nedoločen, proizvajalec: Kaup Crodpexvv S Ssfx Apleb

Stanje: novo, Leto izdelave: 2026, skupna masa: 500 kg, skupna dolžina: 28.650 mm, skupna širina: 16.500 mm, skupna višina: 25.230 mm, vhodna napetost: 230 V, trajanje garancije: 24 meseci, About this machine: You receive a 24-month warranty with this machine. Upon request, we can also offer you suitable ramp options, a photoelectric sensor for black detection, or the appropriate machine stretch film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper, which guarantees absolutely consistent results with up to 32 storable programs, thus eliminating any “human factor.” It is as space-saving as a pallet wrapper with horseshoe turntable, and as robust as a closed system – the advantages of this machine are clear and to the point! The electromagnetic brake allows precise adjustment of film tension, and the settings for base wraps, upward wraps, top wraps, and downward wraps can be saved in each program. Within the programs, you can further adjust the speed of the film carriage and turntable, as well as store the number of top and bottom wraps and the film overlap at the pallet end individually for each program. This enables you to set up customized programs for each packing scheme, ensuring consistently perfect wrapping results. The programs can be password-protected so operators can only select from pre-set programs. With a weight of 500 kg, this model is designed for loads up to 1,200 kg. Our Profiline LP features a 1,650 mm turntable and can wrap pallets up to 2,500 mm high as standard. Automatic pallet detection via photoelectric sensor, as well as adjustable head and foot wraps, come as standard. This model is our recommendation if you have limited space and require a professional, robust pallet wrapper that is fully adaptable to your needs. Would you like a taller mast, pre-stretch film unit, or automatic film cutting? With this machine, almost anything is possible! We are happy to configure this machine as a new unit with any options tailored to your requirements. Crsdpfoy Drbnjx Apleb About us: Business is done between people – we are convinced of that! A supplier delivers the goods you order – a partner does more: they help you find the best solution, support you in achieving your goals, and are by your side when facing challenges. That is our philosophy. For over 40 years and in the 4th generation, we have been the partner for SMEs when it comes to 'stretching and sealing.' If you wish, we also provide expert advice on which pallet wrapper in our portfolio is the best solution for your requirements!

Stanje: novo, Leto izdelave: 2026, skupna masa: 500 kg, skupna dolžina: 28.650 mm, skupna širina: 16.500 mm, skupna višina: 25.230 mm, vhodna napetost: 230 V, trajanje garancije: 12 meseci, About this machine: You receive a 24-month warranty with this machine. Upon request, we can also offer you suitable ramp options, a photoelectric sensor for black detection, or the appropriate machine stretch film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper, which guarantees absolutely consistent results with up to 32 storable programs, thus eliminating any “human factor.” It is as space-saving as a pallet wrapper with horseshoe turntable, and as robust as a closed system – the advantages of this machine are clear and to the point! The electromagnetic brake allows precise adjustment of film tension, and the settings for base wraps, upward wraps, top wraps, and downward wraps can be saved in each program. Within the programs, you can further adjust the speed of the film carriage and turntable, as well as store the number of top and bottom wraps and the film overlap at the pallet end individually for each program. This enables you to set up customized programs for each packing scheme, ensuring consistently perfect wrapping results. The programs can be password-protected so operators can only select from pre-set programs. With a weight of 500 kg, this model is designed for loads up to 1,200 kg. Our Profiline LP features a 1,650 mm turntable and can wrap pallets up to 2,500 mm high as standard. Automatic pallet detection via photoelectric sensor, as well as adjustable head and foot wraps, come as standard. This model is our recommendation if you have limited space and require a professional, robust pallet wrapper that is fully adaptable to your needs. Would you like a taller mast, pre-stretch film unit, or automatic film cutting? With this machine, almost anything is possible! We are happy to configure this machine as a new unit with any options tailored to your requirements. About us: Business is done between people – we are convinced of that! A supplier delivers the goods you order – a partner does more: they help you find the best solution, support you in achieving your goals, and are by your side when facing challenges. That is our philosophy. Codpfx Apoy Drbhelerb For over 40 years and in the 4th generation, we have been the partner for SMEs when it comes to 'stretching and sealing.' If you wish, we also provide expert advice on which pallet wrapper in our portfolio is the best solution for your requirements!

Leto izdelave: 2026, stanje: novo, številka stroja/vozila: KVK 3 Automatik_1, This automatic stretch wrapping machine with a turntable independently attaches the film to the pallet and cuts it off again after the wrapping cycle, unlike the KVK 3. Wrapping can also be conveniently started via remote control. No more getting off the forklift or bending down to attach the film to the pallet. Crjdpfoy Drfgsx Aplob It is also equipped with a pre-stretch system allowing 250% stretch. Thanks to this system, you can turn 1m of film on the roll into up to 3.5m on the pallet, drastically reducing your material usage. In addition, this system generates only minimal application tension, so even light goods will not be pulled off the turntable. Weighing 700 kg, this model is very stable and designed for loads up to 2000 kg. The KVK 3 Automatic features a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds for the turntable and film carriage, as well as a power stretch unit that can be controlled via potentiometer, you can perfectly adapt the automated wrapping to your product. Automatic pallet detection (via photocell) comes as standard, along with adjustable top and bottom wraps. You can choose from ‘up only’, ‘up & down’ (cross-wrap), or ‘rainproof’ wrapping programs. Manual operation is also possible if required. If the wrapper needs to be used elsewhere, it can be easily lifted and relocated by forklift via integrated cut-outs. Options: In addition to a suitable access ramp and a photocell for detecting dark items or black film, the KVK 3 Automatic can also be optionally configured for greater wrapping heights (up to 3200 mm). This model is our clear recommendation if you need to wrap very light goods or need to stretch wrap more than 30 pallets per day, with automatic film attachment and cutting each time. For further information, please find the technical data sheet attached to this listing as a PDF!

Stanje: dober (rabljeno), Leto izdelave: 1991, Maks. dvižna zmogljivost: 250 kg Z dvižnim motorjem. Povezovalni kabel je priložen! Dolžina zasučnega kraka: 6500 mm Višina do kljuke: 3650 mm Skupna višina: cca 4000 mm Maksimalna gradbena višina: 4400 mm Stanje: dobro, rabljeno Codpsy Efzwsfx Apljrb

Stanje: novo, Leto izdelave: 2026, New machines directly from a reliable and experienced manufacturer. No risk! We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; professional advice and support during and after the warranty period. Guaranteed. Advice, delivery, or maintenance? Always happy to help. Looking for individual machines or entire packages? No problem. We know all our equipment inside and out. For years. And as the manufacturer, we are always up to date. We look forward to hearing from you. Folding Machine RED-2200/0.8 incl. Transport Wheels Folding machine/box and pan brake with side cut-outs for top-to-bottom bending. Thanks to this, you can easily finish window sills. The machine frame offers a 6 cm high up and down clearance for bent workpieces. This is a modern sheet metal folding machine capable of bending sheet metal from three sides. Technical specifications: - Maximum working width: 2080 mm - Bending capacity: up to 0.8 mm (mild steel) - All non-ferrous metals: 30% higher bending capacity - Bending angle: max. 145 degrees - Clamping beam thickness: 15 mm - Top beam can be raised in three positions - Top beam lift: 80 mm Angle scale Angle stop Rear support for holding sheets Front depth stops - Weight: approx. 250 kg Roller shear (max. cutting capacity 0.8 mm/mild steel) available for an extra €350 - Manual seaming machine available for an extra €75 The machine complies with CE regulations and includes a 12-month warranty. Delivery costs: €180 Codpfx Apog In Azjlerb Price: €2,200 Delivery date: weekly Cash on delivery We look forward to your inquiry! Invoices are issued at 0% VAT as intra-community delivery or with 19% VAT as applicable.

Stanje: dober (rabljeno), Leto izdelave: 2018, obratovalne ure: 3.869 h, nosilnost: 1.400 kg, dvižna višina: 2.350 mm, vrsta goriva: električni, tip droga: dupleks, gradbena višina: 2.000 mm, Proizvajalec + model: TOYOTA SWE 140 S Dvižni brat: 2W2350 ID: 25091.0187 Kategorija: Rabljeno Dvižni brat: 2W2350 Spuščena višina: 2000 mm Dvižna višina: 2350 mm Nosilnost: 1400 kg Leto: 2018 Delovne ure: 3869 ur Kapaciteta: 24 V / Možnosti: ZELO edinstvena ŠIROKOTIRNA izvedba z menjalcem palet!! = Razmikač / Rotator / Klešče (Razpon od 560 do 1700 mm) - Proporcionalni ventili za dvig in spust - Širina med podporami 1280 MM!! Credpoy Itklofx Aplsb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), premer vretena: 40 mm, skupna masa: 1.500 kg, dolžina vretena za rezkanje: 150 mm, Double-sided swivel spindle mounting with 2 robust segment guides, column in modern steel construction, table in heavy-duty, high-ribbed cast design, interchangeable milling spindle, three-phase motor with 4 speeds, electric height and swivel adjustment in both rapid and fine feed modes with electronic digital display, incremental measurement switching during height adjustment, milling fence with fine adjustment and metal fence jaws as well as replaceable aluminum anti-splinter inserts, extraction ports at the milling fence and below the table, each 120 mm diameter, minimum extraction speed at the extraction port 20 m/s, rotatable table insert, interlocked rotary switch for forward and reverse operation, lockable main switch, cam switch, automatic motor brake. Table size: 1350 x 800 mm Table height: 880 mm Motor power: 11 kW Milling spindle holder: MK 5 Speeds: 3000/4500/6000/9000 rpm Swivel range of the milling spindle: -5° to +45° Height adjustment: approx. 145 mm Cjdpfx Aowcpqqepljrb Control: CNC Table extension on both sides, total length 2500 mm, incl. extendable frame support Stepless 4-roller feed unit 2-axis control Milling spindle with 40 mm diameter and 150 mm length

Stanje: novo, Leto izdelave: 2026, ROBLAND T 120 TP Voltage: 3 x 230V / 3 x 400V Crsdpfx Apjllup Relsb Weight: 1070 kg Motor power: 7 kW (optional 9.2 kW) Table dimensions: 1200 x 705 mm Table height: 930 mm Interchangeable spindle diameters: 30 / 32 / 40 / 50 mm, 1" 1/4 Spindle length: 180 mm Height adjustment: 205 mm Number of revolutions per minute: 3000 / 4500 / 6000 / 7000 / 10000 Maximum table diameter and height: 320 x 95 mm Sliding table dimensions: 760 x 500 mm Sliding table height adjustment: 1050 mm Extraction port diameter: 120 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Sheet width: 3200 mm Sheet thickness: 3.0 mm (steel) Sheet thickness (stainless steel): 2.0 mm Opening width / upper beam: 300 mm OW speed: 40.0 mm/sec Bending beam adjustment: 80.0 mm Working height: 900 mm BW speed: 90.0 deg/sec Control: MULTIBEND 5000 Backgauge – adjustable: 10 - 1550 mm Accuracy: +/- 0.1 mm Air pressure: 5.0 bar Operating hours: approx. 1,000 h Voltage: 400 V Total power requirement: 2 x 4.0 kW Weight: 4,400 kg Dimensions (L-W-H): 4295 x 2225 x 1775 mm Original price: approx. €85,000 Machine with only around 1,000 operating hours (!!) Good condition (!!) Special price on request - Supplied in tested condition - Machine video - ?v=VP6emx4HTYM ! Maximum flexibility when bending panels, boxes, and profiles ! High flexibility in part design ! High productivity and throughput ! Easy to operate Equipment: - Motorized universal swivel bending machine "RAS 73.30" * High-precision mechanics with modern control technology * For single-piece and series production Crsdpoxabz Tsfx Apljb * Robust high-speed model with rapid axis movements * Torsion-resistant welded construction - RAS CNC control model "MULTIBEND 5000" * Material and tooling library * Swivels – front right * 1x emergency stop button - CNC electro-motorized upper beam adjustment * Fast opening and closing speed * Programmable opening and closing height * Radius bending without special tools (multi-step bends) * Rigid upper beam for precise bends * 1x set RAS segmented upper tools, height 80 mm * RAS "Klick-In" tool system (pneumatic) - CNC electro-motorized bending beam adjustment * Rapid swinging motion: short production times * Crowning system compensates for deformation due to bending forces * 1x set RAS segmented bending tools - CNC electro-motorized backgauge * Quick positioning, high repeatability * Table sheets support the weight of the material * Table sheets made of stainless steel with ball rollers - 2x free-moving double foot switches - 1x RAS tool trolley for bending tools (mobile) - Operating manual (PDF) + original circuit diagram

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €63,900 Leasing rate: €1,207.71 Bending length: 4,200 mm Sheet thickness (420 N/mm²): 1.5 mm Max. sheet thickness – stainless steel: 1 mm Max. sheet thickness – aluminium: 2 mm Drive: Motorized Length: 5,450 mm Width: 2,200 mm Height: 1,900 mm Weight: 5,350 kg Backgauge: 1,000 mm CNC CONTROL WITH TABULAR PROGRAMMING - 15.6" touchscreen on swivel arm - Tabular programming via input of the respective axis values - Open or closed hemming function - Multi-radius functions for folding or bending - Programming of material quality, sheet thickness, springback, bending corrections, and creation of a database for various material types, sheet thicknesses, and sheet lengths - Piece counter - Password authorization - 128GB HDD, providing virtually unlimited storage capacity - Remote maintenance via WLAN - Detailed alarm, tool, and parameter pages Motorized drive (servo motors) for upper beam and bending beam (Z and Y axis) Motorized backgauge (X axis) with servo motor, 1,000 mm, rectangular configuration, with ball rolls in the sheet metal trays Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Continuous upper tool rail 20° with R1 2 pcs. bending beam rails (7 or 10 mm, 15 or 25 mm) Front light curtain protection Three-way foot pedal OPTIONS: Segmented gooseneck rails Codpfxowirrqj Apljrb Pneumatic tool clamping Segmented lower and bending tools Servo drive for the bending beam Manual crowning system Second foot pedal Side gauge Rear light curtain protection 2D or 3D graphic control PC software Special omega geometry for lower and bending tools Tapered backgauge Backgauge extension Vacuum holder

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,600 Leasing rate: €1,013.04 Bending length: 2,050 mm Sheet thickness (420 N/mm²): 3 mm Max. sheet thickness - stainless steel: 2 mm Max. sheet thickness - aluminium: 4 mm Drive: Motorized Length: 3,350 mm Width: 2,200 mm Height: 1,900 mm Weight: 3,800 kg Backgauge: 1,000 mm CNC CONTROL WITH TABULAR PROGRAMMING - 15.6" touchscreen on swivel arm - Tabular programming by input of respective axis values - Open or closed hemming function - Multi-radius functions for hemming or bending - Programming of material type, sheet thickness, springback, bending corrections, and creation of a database for different material types, sheet thicknesses, and sheet lengths - Piece counter Crjdpfowiq E Nsx Aplob - Authorization via password - 128GB HDD, virtually unlimited storage capacity - Remote maintenance via WiFi - Detailed alarm, tool, and parameter pages Motorized drive (servo motors) for the upper beam and bending beam (Z and Y axis) Motorized backgauge (X axis) with servo drive, 1,000 mm, rectangular configuration, with ball rollers in sheet platforms Upper beam opening: 220 mm (without tools) Manual adjustment of bending beam: 35 mm Upper beam with 45° geometry Continuous upper tool rail, 20° with R1 2 pcs. bending beam rails (7 or 10 mm, 15 or 25 mm) Front light curtain protection 3-position foot pedal OPTIONS: Segmented gooseneck rails Pneumatic tool clamping Segmented lower and bending tools Servo drive for bending beam Manual crowning system Second foot pedal Side stop Rear light curtain protection 2D or 3D graphical control PC software Special Omega geometry for lower and bending tools Tapered backgauge Backgauge extension Vacuum holder

Stanje: dober (rabljeno), Leto izdelave: 1982, Širina pločevine 2000 mm Debelina pločevine 2 mm Razdalja med stojali 2080 mm Skupna potrebna moč 2,2 kW Teža stroja cca 2,8 t Potrebni prostor cca 3,0 x 1,2 x 1,5 m Hidravlični upogibni stroj - Maksimalne dimenzije upogibane pločevine: 2000 x 2 [mm] Cjdjw N S Eispfx Aplsrb - Moč elektromotorja: 2,2 kW - Kot upogibanja: 0 – 180 stopinj

Stanje: rabljeno, Sheet width 3200 mm Sheet thickness 2.5 mm Machine weight approx. 3.5 t Csdjr Ngtfopfx Aplerb Tools have been newly reground Bending angle preselection via potentiometer

Stanje: rabljeno, Ponudba paketa, ki vsebuje 16 rabljenih in robustnih zložljivih regalov. Prilagodljiva in prostorsko varčna rešitev za skladiščenje palet ter blaga v skladiščih in distribucijskih centrih. Zaradi velikih dimenzij 2150 x 1100 x 310 mm (D x Š x V) je regal primeren za shranjevanje do dveh euro palet. Cedpfx Ajy Hpttjpljrb

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Spindle swivel: Yes, 0 to 45° Height adjustment: Handwheel / electric Credpfjuzkxxex Aplsb Swivel adjustment: Handwheel / electric Cutter fence adjustment: manual Height display: digital readout Swivel angle display: digital readout Fence display: mechanical counter Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 rpm Motor power: 7 kW Motor brake: Yes, automatic Extraction port: 2 x 120 mm Machine length: 2599 mm Machine depth: 900 mm Weight: 655 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Swiveling spindle: Yes, 0 to 45° Height adjustment: electric / position control Swivel adjustment: electric / position control Fence adjustment: electric / position control Fence jaw adjustment: manual / handwheel Height display: digital readout Swivel angle display: digital readout Fence display: mechanical counter Aigner integral fence: yes Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 RPM Motor power: 7 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 2599 mm Machine depth: 900 mm Codpfx Ajwhuvceplorb Weight: 655 kg

Stanje: dober (rabljeno), delovna širina: 1.050 mm, najv. debelina pločevine: 2 mm, najv. debelina jeklene pločevine: 2 mm, skupna masa: 220 kg, delovna dolžina: 1.050 mm, max. working width: 1050 mm for sheet thickness up to: 2 mm upper beam opening: 60 mm Crodjui Ikrjpfx Apleb weight: 220 kg space requirement: 1380 x 550 x 990 mm

Stanje: pripravljen za uporabo (rabljen), delovna širina: 3060 mm za pločevine (pri trdnosti 40 kg) do: 4 mm najmanjši polmer upogibanja: debelina pločevine x 1,25 najmanjša notranja višina roba: debelina pločevine x 6 odprtina zgornje preklade: 220 mm Codpfxexwnlts Apljrb nastavljivost spodnje/upogibne preklade: 90 mm maks. kot upogiba: 180° hitrost pomika dol/gor: 40/60 mm/s hidravlični pogon: 380 V, 7,5 kW teža: 4,3 t potreben prostor: 4150 x 1800 x 2500 mm