Optimum G-Me130411P nakup rabljenega (37.064)

Leto izdelave: 2022, stanje: pripravljen za uporabo (rabljen), Na voljo je univerzalni, natančni vrtalno-rezalni stroj Optimum. Število vrtljajev: 1750 vrt/min, hod vretena: 120 mm, nagib rezalne glave: +/-45°, navpični hod: 24 mm–650 mm, horizontalni hod: 0 mm–185 mm, razdalja med vretenom in prečnim mizom: 60 mm–390 mm, vrtalna zmogljivost v jeklo: 30 mm, maks. premer rezalne glave: 100 mm, maks. premer valjastega rezalnika: 25 mm, mere prečnega miza X/Y: 1000 mm/240 mm, maks. nosilnost mize: 160 kg, hod X/Y/Z: 580 mm/200 mm/340 mm, podajanje X: 720 mm/min, mere stroja X/Y/Z: pribl. 1300 mm/1100 mm/2200 mm, teža: pribl. 900 kg. Dokumentacija je na voljo. Ogled na kraju samem je možen. Pedpfxozq Ecvo Amfegr

Leto izdelave: 2017, stanje: pripravljen za uporabo (rabljen), X-axis: 550mm, Y-axis: 305mm, Z-axis: 460mm, Milling table dimensions: 800x320mm, T-slots: 14mm/3 pcs./spacing 100mm, Max. table load: 300kg, Distance spindle-to-table: 100-600mm, Number of tool stations: 12, Max. tool diameter: 70mm, Max. tool length: 300mm, Max. tool weight: 6kg, Tool change time (T-T): 7s, Milling spindle power S1 operation: 5.5kW, Power S6-30% duty cycle: 7.8kW, Torque S1 operation: 35Nm, Torque S6-30% duty cycle: 50Nm, Spindle mounting: ISO 40/BT40x45°, Coolant system pump power: 650W, Tank capacity: 120l, Minimum compressed air supply pressure: 0.6MPa (6bar), Air consumption: 0.1-0.15m³/h at 0.6MPa, Compressed air quality: ISO 8573.1 class 2, Compressed air connection: 3/8 inch, Connected load: 12.5kVA, Control system: Siemens SINUMERIK 808D MILLING, Length: 2164mm, Front width: 1520mm, Side width: 1860mm, Height: 2200mm, Door opening range: 760mm, Door opening width: 1055mm, Foundation/installation area: 1520x2080mm, Weight: 2.8t. An on-site inspection is possible. Pjdpfozcfk Esx Amfjgr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, potovalna razdalja osi X: 800 mm, pomik osi Y: 305 mm, pomik po osi Z: 406 mm, skupna višina: 2.150 mm, skupna širina: 1.450 mm, širina mize: 230 mm, dolžina mize: 1.244 mm, obremenitev mize: 230 kg, skupna masa: 950 kg, največja hitrost vretena: 5.100 obr/min, največja dolžina izdelka: 1.400 mm, število osi: 3, Ta 3-osna rezkalna strojna obdelovalna enota Optimum OPTImill MF 2V je bila izdelana leta 2017. Ima maksimalno vertikalno hitrost vretena 5100 vrt/min in premer rezkalne glave 76 mm. Stroj ima horizontalno rezkalno mizo z dolžino 1244 mm in maksimalno nosilnostjo 230 kg. Če iščete visokokakovostne rezkalne zmogljivosti, razmislite o nakupu naše vrtalne in rezkalne strojne obdelovalne enote Optimum OPTImill MF 2V. Za več podrobnosti nas kontaktirajte. - Tip: Ročna, večfunkcijska 3-osna vrtalno-rezkalna strojna obdelovalna enota - Digitalni prikazovalnik: DPA 21 - Preureditve / nadgradnje: Nadgradnja pogona - Skupna priključna moč: približno 1,5 kW (lahko je več zaradi preureditev) - Omrežna napetost: 400 V - Faze: 3 - Vrsta toka: ~ - Omrežna frekvenca: 50 Hz - Maks. velikost rezkalne glave: 76 mm Pgodpfx Ajzq A A Hemfer - Maks. velikost rezkala: 18 mm - Gib vertikalnega vretena: 233 – 533 mm - Držalo orodja za vertikalno vreteno: ISO 40 DIN 2080 - Območje hitrosti vertikalnega vretena: 10 – 5100 vrt/min - Število območij hitrosti vertikalnega vretena: 6 - Regulacija hitrosti vertikalnega vretena: elektronsko nastavljiva - Dolžina horizontalne rezkalne mize: 1244 mm - Širina horizontalne rezkalne mize: 230 mm - Minimalna razdalja med vertikalnim vretenom in horizontalno mizo: 57 mm - Maksimalna razdalja med vertikalnim vretenom in horizontalno mizo: 463 mm - Širina T-utora horizontalne mize: 16 mm - Število T-utorov na horizontalni mizi: 3 - Razdalja med T-utorami horizontalne mize: 63 mm - Maksimalna nosilnost horizontalne mize: 230 kg - Število črpalk za hladilno tekočino: 800 mm, samodejno - Moč pogonskega motorja vertikalnega vretena pri neprekinjenem delovanju S1: 1,5 kW - Gib osi X (samodejno): 24 mm - Gib osi Y (samodejno): 20 mm - Hitrosti vretena: brezstopenjska regulacija hitrosti - Nagib vrtalno-/rezkalne glave: nagibna za ± 45° - Gib / globina potopa: 215 – 533 mm MF 2Vario DPA - Omejilo globine vrtanja: nastavljivo z milimetrsko skalo, odčitavanje od spredaj - Zaščitna kapuca: nastavljiva po višini, velika - Os X: motorično podajanje mize, brezstopenjska regulacija hitrosti, hitri hod, desni/levi tek, prečna miza

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Machine on display. Optimill F 310 HSC Premium CNC Milling Machine direct from the manufacturer. F 310 HSC – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile rail with roller circulation in all axes for high load capacities • High-torque servo drives, direct to the ballscrews in all three axes • Precision-ground, preloaded high-performance ballscrews for rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 12,000 rpm with inline spindle • Massive, precise milling table with five T-slots, large dimensions and precision-ground • The portable electronic handwheel with enabling switch and emergency stop button greatly facilitates program setup • Tool changer with 30-tool dual-arm gripper • Coolant system with chip-flushing setup and cleaning gun • Internal spindle coolant 20 bar • Band-type chip conveyor provides efficient chip removal • Chip trolley • Oil separator • Machine light in the work area • Additional SIEMENS package: warranty on material defects and free OSS Plus online/on-site service • 1-year Basic maintenance contract included in DE/AT/CH • Control • 15.6" color display • 16:9 format • Complete Package • Safety Integrated • Residual material detection and processing • ShopMill step programming • Manage network drive Psdjynf Unjpfx Amfogr • 3D simulation • Trace function • Equipment Details • Inline spindle • Tool holder SK 40 / DIN 69871 • Spindle speed 12,000 rpm • Dimensions and Weights • Length: approx. 4319 mm • Width/Depth: approx. 2300 mm • Height: approx. 3000 mm • Weight: approx. 7000 kg • Rapid Traverse Speed • X-axis: 30 m/min • Y-axis: 30 m/min • Z-axis: 30 m/min • Electrical Data • Connection voltage: 400 V • Mains frequency: 50 Hz • Electrical connection • Total connected load: 56 kVA • Horizontal Milling Table • Length: 1200 mm • Width: 600 mm • T-slot size: 16 mm • Number of T-slots: 5 • T-slot spacing: 100 mm • Max. load capacity: 800 kg • Accuracy • Repeatability: ± 0.005 mm • Positioning accuracy: ± 0.005 mm • Travel • X-axis automatic: 1050 mm • Y-axis automatic: 600 mm • Z-axis automatic: 600 mm • Vertical Spindle • Spindle taper: SK 40 DIN 69871 • Speed range: 12,000 rpm • Main drive motor continuous operation S1: 20 kW • Main drive motor S6-30% operation: 50.3 kW • Main drive motor torque continuous S1: 96 Nm • Torque at 30% duty cycle S6: 240 Nm • Feed Force • X-axis feed force: 6.68 kN • Y-axis feed force: 6.68 kN • Z-axis feed force: 10 kN • Feed Motor Torque • X-axis continuous S1: 18 Nm • Y-axis continuous S1: 18 Nm • Z-axis continuous S1: 27 Nm • Tool Changer • Double arm gripper • Number of tool positions: 30 • Max. tool length: 300 mm • Max. tool weight: 8 kg • Tool-to-tool change time: 2.5 s

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Končna cena, saj se uporablja diferencirana stopnja DDV po §25a UstG. Prejmete ustrezen račun! Interna številka artikla: 26043 CNC rezkalni stroj Optimum F100 Leto izdelave: 2007 Stroj prihaja iz javne izobraževalne ustanove. Krmiljenje: Siemens Sinumerik 802 S base line RS232 vmesnik Vpenjanje: ISO40 Hitrost: 100 - 6000 vrt/min Pomiki: X 450 / Y 300 / Z 400mm Miza: 920 x 280mm Obremenitev mize: 300 kg + Navodila za uporabo + Navodila za programiranje + Električna shema + Oprema (različni nosilci orodja, med drugim različni MK4 nosilci, vključno z redukcijo osnovnega vpenjanja na MK4) + 2-osni digitalni prikazovalnik Heidenhain + Navodila za uporabo + Črpalka za hladilno tekočino Hitrost: 90 - 1800 vrt/min Psdpfx Amszb I Tgofogr Pomiki: X 400 / Y 200 / Z 400 mm Podajalna hitrost: 10 - 160 mm/min Hitri pomik: 900 mm/min Moč: 1,6 kW / 380 V Dolžina x širina x višina: 150 x 150 x 175 cm Teža: 1300 kg Stroj je popolnoma delujoč in ga je možno po dogovoru ogledati pod napetostjo na več kot 500 m² ogrevanega skladiščnega prostora.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, največja hitrost vretena: 2.000 obr/min, moč vretenovega motorja: 5.500 W, skupna višina: 1.550 mm, skupna širina: 1.065 mm, skupna masa: 1.720 kg, največja dolžina izdelka: 2.215 mm, število osi: 2, Ročna stružnica z vodilnim vretenom in potisno palico, letnik 2018. Ta model Optimum TH 4610 ima razdaljo med centri 1060 mm in premer obdelave nad posteljo 460 mm. Opremljena je z območjem vrtljajev vretena od 25 do 2000 vrt/min in lahko obdeluje največjo težo obdelovanca 300 kg. Če iščete visokokakovostno stružnico, razmislite o modelu Optimum TH 4610, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. - Tip stroja: Ročna stružnica z vodilnim vretenom in potisno palico, z digitalnim prikazovalnikom položaja - Razdalja med centri: 1060 mm - Višina centra: 230 mm - Premer obdelave nad posteljo: 460 mm - Premer obdelave nad prečnim sankom: 270 mm - Dolžina struženja: 240 mm Pjdszq Edgspfx Amfjgr - Premer glavnega vretena: 58 mm - Največja teža obdelovanca: 300 kg - Stožčasta povezava glavnega vretena: MK6 / MT6 - Območje vrtljajev vretena: 25 – 2000 vrt/min - Hod prečnega sanka: 285 mm - Hod zgornjega sanka: 125 mm - Premer vpenjalne puše: 60 mm - Hod vpenjalne puše: 130 mm - Stožčasta oblika v vpenjalni puši: MK4 / MT4 - Premer vpenjalne glave s tremi čeljustmi: pribl. 200 mm - Dimenzije (D x V x Š): 2215 mm x 1550 mm x 1065 mm - Moč motorja: 5,5 kW - Napetost / frekvenca: 400 V / ~50 Hz

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, The machine is currently on display and has only been used for demonstration purposes. Optimill F 120X CNC milling machine directly from the manufacturer. F 120X – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. - Heavy-duty design - High productivity - Linear guides for rapid traverse speeds in all axes - 21-tool magazine automatic tool changer - High reliability - Machine body cast from high-quality Meehanite cast iron - Precision-ground cross table with 3 T-slots - Strongly ribbed, torsion-resistant machine base - Precision-ground, preloaded high-performance ball screws in all axes - High-torque servo drives mounted directly to the ball screws in all 3 axes - Electronic handwheel - Chip conveyor - Cleaning gun - RJ45 connection, USB port, and 230V power supply - Coolant system with 210-liter coolant tank - Heat exchanger Included options: - PPU 290 Touch Panel - 16,000 rpm inline spindle with oil cooler - Belt conveyor with chip trolley Machine leasing is available through Siemens Finance. Liquidity is required. Dimensions and Weights - Length approx. 2,315 mm - Width/Depth approx. 2,194 mm - Height approx. 2,325 mm - Weight approx. 3,800 kg Drilling and Milling Capacity - Maximum cutter head size: 80 mm Feed/Rapid Traverse Speed - X-axis: 40,000 mm/min - Y-axis: 40,000 mm/min - Z-axis: 40,000 mm/min Electrical Data - Connection voltage: 400 V - Number of phases: 3 - AC current - Mains frequency: 50 Hz - Electrical connection Pjdpfxoymkbqj Amfsgr - Total connected load: 45 kVA Vertical Spindle to Table Distance - Min.: 150 mm - Max.: 450 mm T-slot size: 14 mm Number of T-slots: 3 Distance between T-slots: 125 mm Maximum load capacity: 250 kg Accuracy - Repeatability: ± 0.006 mm - Positioning accuracy: ± 0.005 mm Coolant System - Coolant pumps - Drive power per coolant pump: 370 W - Tank capacity: 120 l Control System - Type: Sinumerik 828D PPU 290 - System software: SW 28x - CNC memory: 8 MB - Block change time: 2 ms - Look Ahead: 150 - Number of tools: 512 Travel - X-axis automatic: 500 mm - Y-axis automatic: 400 mm - Z-axis automatic: 300 mm Vertical Spindle - Spindle taper: BT 30 - Speed range: 10 – 16,000 rpm - Drive motor output (continuous operation S1): 12 kW - Drive motor output (S6-30% duty cycle): 22.8 kW - Drive motor torque (continuous operation S1): 38 Nm - Drive motor torque (S6-30% duty cycle): 116 Nm Feed Motor Torque - X-axis (continuous operation S1): 6 Nm - Y-axis (continuous operation S1): 6 Nm - Z-axis (continuous operation S1): 11 Nm Servo Tool Changer - Type: Carousel in front of the spindle - Number of tool positions: 21 tools

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 60 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 333840, potovalna razdalja osi X: 450 mm, pomik osi Y: 200 mm, pomik po osi Z: 510 mm, nosilec vretena: MK 3, hod vretena: 120 mm, vrsta vhodnega toka: trifazni, širina mize: 210 mm, vhodna napetost: 400 V, dolžina mize: 750 mm, zmogljivost vrtanja: 32 mm, razdalja od središča mize do nosu vretena: 275 mm, največja hitrost vrtenja: 3.200 obr/min, vrtljajska hitrost (min.): 95 obr/min, hitro pomikanje X-os: 240 m/min, Oprema: dokumentacija / priročnik, Rezkar je popolnoma delujoč in ga je mogoče preizkusiti. Prodaja se opravi zaradi nakupa večjega modela. Na voljo je tehnična dokumentacija. Rezkar ima masivno spodnjo mizo, v kateri je nameščena črpalka za hladilno tekočino. Samodejni pomik mize ima: - Nujni izklop, brez ponovnega zagona - Brezstopenjsko regulacijo hitrosti in hitri pomik Pgodpfx Asyrib Tomfor - Desni/levi tek - Zaščita proti preobremenitvi ter končna stikala - Hitrost: 0–165 min⁻¹ - Hitri pomik: 240 min⁻¹ Trioosni prikaz položaja, razred natančnosti 0,01 mm.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, S 3-osnim digitalnim prikazovalnikom Leto izdelave: 2015 Premer vretena: 54 mm Razdalja med konicami: 1000 mm Višina konic: 200 mm Območje vrtljajev: 30 – 3000 vrt/min, brezstopenjsko nastavljanje z prikazom na zaslonu Z naslednjo opremo: Pgodpfxsyybxns Amfjr Nosilec orodij Multifix Naprav za hlajenje Tročeljustna vpenjalna glava Ø 200 mm Štirročeljustna vpenjalna glava Ø 250 mm Vpenjalna glava z vpenjalnimi tulecami do Ø 32 mm Zaščita vpenjalne glave Zaščita proti ostružkom z osvetlitvijo Fiksna lineta Ø cca 150 mm Premična lineta Ø cca 100 mm 4 kos nastavljivih strojevih nog 1 kos premična centrirna konica Navodila za uporabo

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Proizvajalec: OPTIMUM Maschinen Germany GmbH Model: F 150 Tip stroja: 3-osni CNC obdelovalni center Serijska številka: 1521211505 Letnik: 2015 Krmilje: Siemens Sinumerik 828D Pomiki osi X/Y/Z: pribl. 750 / 500 / 500 mm Držalo orodja: BT40 Moč vretena: 12 kW Moč vretena S1: 9 kW Skupna moč: 25 kW Napajanje: 400 V / 50 Hz Delovna miza z T-utorji: pribl. 800 × 450 mm Pgedpfxsy Ia Uwo Amfor Oprema: Vgrajen menjalec orodja Vgrajen transportni trak za ostružke Teža stroja: pribl. 3520 kg

Stanje: rabljeno, Leto izdelave: 2023, Optimum Optiturn TX 5216V – Used Machine. Machine bed made from heavily ribbed cast iron One-piece machine base made from steel High rigidity of the headstock housing thanks to heavily ribbed 25GG cast iron Precisely machined carriage Shafts mounted on needle bearings, all components lubricated in an oil bath Bed guideways hardened and precision ground All electronic controls centrally accessible All feed gearbox gears made of hardened steel Handwheels decoupled and inspected according to EN 23125 Dual-channel safety electronics Switches with life-cycle calculation, tested to EN ISO 13849 Full leadscrew and feed screw cover Fully illuminated work area Service-friendly removable rear panel Hardened and ground face plate spindle ensures exceptional accuracy and durability High material removal rate in rough machining thanks to large cutting capacity Energy chain for gentle cable and hose guidance Lockable chip guard travels with the carriage, featuring integrated position indicator and coolant hose, manually adjustable No change gears required Equipped with safety device against simultaneous operation of threading and feed mechanisms Electronic feed stop for the Z-axis Coolant system with separate coolant tank featuring fill level indicator and oil separator; easy and complete emptying and cleaning as per DIN Electrical position shutoff with quadruple position stop Three-jaw chuck included as standard Quick-change tool post SWH 7-C Tool holder 32 x 130 type D for 25 mm square tools Large spindle bore Dimensions and Weights Length approx. 2925 mm Width/Depth approx. 1195 mm Height approx. 1930 mm Weight approx. 2470 kg Work Area Centre height: 260 mm Centre distance: 1600 mm Swing over bed: 520 mm Swing over cross slide: 324 mm Bed width: 350 mm Speed Range Number of speed ranges: 2 x 3 steps Speed range: 12 – 1800 rpm Electrical Data Output (motor power): 7.5 kW Total connected load: 5.5 kW Connection voltage: 400 V Network frequency: 50 Hz Coolant System Coolant pump power: 60 W Psdpex Hdq Tofx Amfjgr Type of generated data: Usage data Tailstock Quill taper: MK 5 Quill travel: 180 mm Quill diameter: 72 mm Spindle Spindle mounting: Camlock DIN ISO 702-2 No. 8 Spindle bore/bar pass-through diameter: 80 mm Tool post: SWH 7C Spindle taper: MK 7 Thread Cutting Metric pitch: 0.5 – 15 mm/rev Number of metric pitches: 55 Imperial pitch: 60 – 2 TPI Number of imperial pitches: 55 Diametral pitch: 120 – 4 DP Number of diametral pitches: 55 Module thread pitch: 0.25 – 7.5 mm x π Number of module pitches: 55 Travel Cross slide travel: 170 mm Compound rest travel: 340 mm Carriage travel: 1400 mm Feed Longitudinal feed range: 0.05 – 1.5 mm/rev Number of longitudinal feeds: 55 Flat feed range: 0.025 – 0.75 mm/rev Number of flat feeds: 55

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, potovalna razdalja osi X: 820 mm, pomik osi Y: 410 mm, pomik po osi Z: 400 mm, skupna višina: 2.300 mm, skupna širina: 2.160 mm, širina mize: 254 mm, dolžina mize: 1.370 mm, obremenitev mize: 300 kg, skupna masa: 1.260 kg, največja hitrost vretena: 4.200 obr/min, največja dolžina izdelka: 2.400 mm, število osi: 3, Ta 3-osna obdelovalna naprava Optimum MF 4-B je bila izdelana leta 2018. Ima maksimalno vrtalno zmogljivost 24 mm in maksimalno velikost rezkalne glave 76 mm. Naprava ima robustno prečno mizo z dimenzijami 1370 x 254 mm in maksimalno hitrost vretena 4200 vrt/min. Če iščete visokokakovostno rezkalno obdelavo, priporočamo, da razmislite o rezkalno-vrtalnem stroju Optimum MF 4-B, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. Pgodpfx Amezq Dk Eefor - Opis: Ročni 3-osni rezkalno-vrtalni stroj s pomično hitro glavo, vrtljivo rezkalno glavo, vrtljivim nosilcem vretena in prikazovalnikom položaja. – Zmogljivost za ploščate rezkalnike: maks. Ø 76 mm – Zmogljivost za cilindrične rezkalnike: maks. Ø 25 mm – Vrtalna zmogljivost (jeklo S235JR): Ø 24 mm – Zmogljivost za globinsko vrtanje (jeklo S235JR): Ø 20 mm – Globina vrtanja: 0 – 420 mm – Gib vretena/hitre glave: 127 mm – Stožčasta povezava vretena: ISO 40 – DIN 2080 – Hitrost vretena: 60 – 4200 vrt/min (min⁻¹) – Stopnje prestav: 2 / brezstopenjska nastavitev – Avtomatski pomik hitre glave: 0,04 | 0,08 | 0,15 mm/vrt – Moč motorja: 2,2 kW | 400 V – 50 Hz – Naklon rezkalne glave (spredaj/zadaj): +/- 45 stopinj – Naklon rezkalne glave (levo/desno): +/- 90 stopinj (horizontalno) – Gib drsnega stroja čez vreteno: 470 mm – Razdalja vretena do mize: maks. 405 mm – Dimenzije/razmak/število T-utora: 16 mm / 63 mm / 3 – Gib osi X (ročno/z motorjem): 820 mm / 740 mm – Gib osi Y (ročno/z motorjem): 410 mm / 330 mm – Gib osi Z (ročno/z motorjem): 400 mm / 320 mm – Moč glavnega motorja: 2,2 kW (400 V / 3 faze / 50 Hz) – Moč črpalke za hladilno tekočino: 90 W – Priložena dodatna oprema: sistem za hladilno tekočino, zbiralnik ostankov in orodja za upravljanje. Tehnične specifikacije Velikost stožčaste povezave: ISO 40

Stanje: rabljeno, Leto izdelave: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH, signs of use present - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 8 - Precisely machined carriage - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - All guideways adjustable via gib strips - Shafts, gears, and main spindle running in oil bath - Compound slide adjustable range ±90° - Guaranteed spindle nose run-out accuracy better than 0.015 mm - Gear wheels operate smoothly, are hardened and ground, mounted with 2 adjustable precision taper roller bearings - Clearly arranged selector levers for feed rate selection - Enclosed design of the quick-shift feed gearbox - Gears and shafts are hardened and ground, run in oil bath in precision bearings - Switches with lifecycle calculation, tested to EN ISO 13849 - Bed slide reverse/forward can be switched via shift spindle - Central lubrication on carriage - Leadscrew cover - Emergency stop button, motor protection switch, lockable main switch - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Fast, simple, and tool-free adjustment via clamping lever - Highly ribbed prism bed, induction hardened and precision-ground from cast iron - Coolant system with separate coolant tank, fill level indicator, and oil separator; easy and complete draining and cleaning per DIN - LED work lamp in chip guard - Two gearbox stages - Spindle bore / bar capacity Ø 105 mm - Siemens Sinamics frequency inverter / Safety Integrated - Energy chain for protected cable and hose guidance - Thread dial scale adjustable - Quick-change tool post SWH 7-C Pgodjx Dzxaspfx Amfjr - 1 tool holder 32 x 150 Type D for square tool bits 25 mm - Digital position indicator DPA 21 - Glass linear scales Dimensions and Weights Length approx. 3450 mm Width/Depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Ranges Centre height: 280 mm Distance between centres: 1910 mm Swing over bed: 560 mm Swing in bed gap: 790 mm Swing over cross slide: 355 mm Turning length in gap: 170 mm Bed width: 350 mm Spindle Speeds Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data Output power (motor): 7.5 kW Total connected load: 8.5 kW Supply voltage: 400 V Line frequency: 50 Hz Coolant System Coolant pump output: 125 W Standards and Approvals Standard: DIN EN 55011 Tailstock Mount: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Max. tool holder mounting height: 25 mm Spindle taper: Ø 113 (taper 1:20) mm Thread Cutting Metric pitch: 0.1 – 14 mm/rev Number of metric pitches: 47 Inch pitch: 112 – 2 TPI Number of inch pitches: 60 Diametral pitch: 4 – 112 DP Number of diametral pitches: 50 Module thread pitch: 0.1 – 7 mm/rev Number of module pitches: 34 Feed Travel Top slide travel: 130 mm Cross slide travel: 316 mm Carriage travel: 1710 mm Feed Range Longitudinal feed: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed: 0.014 – 0.784 mm/rev Number of cross feeds: 42

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The machine is on display. Optiturn L34 HS CNC lathe - Directly from the manufacturer. L34 HS – The OPTIMUM CNC lathe with Siemens SINUMERIK 808D Advanced PPU 150 control system. - Reinforced machine bed made of grey cast iron - Sophisticated spindle bearing system - Emergency stop punch button - Central lubrication - Spindle and feed motors supplied by Siemens - Maintenance-friendly protective enclosure - Rear service access panel for maintenance - Safety interlock on the front sliding door - Turret is located behind the turning center (left-hand turning tools) - Linear guideways - "SINUMERIK 808D on PC" software package included (practical training software that allows workpieces to be programmed and simulated offline on a PC; free to download) Technical Data Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 6.5 kVA Spindle - Drive motor (S1 operation): 3.7 kW - Drive motor torque (S1 operation): 23.6 Nm - Torque at spindle: 40 Nm - Spindle mount: DIN 6350 A2-3 - Spindle bore: Ø 46 mm Pgsdpozi Evgefx Amfsr Coolant system - Coolant pump power: 95 W - Tank capacity: 75 liters Machine Data - Center height: 165 mm - Center distance: 600 mm - Swing over cross slide: Ø 146 mm - Swing over bed: Ø 350 mm Speed range - Spindle speeds*: 30 - 3500 rpm Tool Turret - Type: Electric - Number of tool stations: 6 tools - Maximum square tool size (height/width): 16 mm - Maximum boring bar diameter: 16 mm Accuracy - Repeatability: ± 0.01 mm - Positioning accuracy: ± 0.01 mm Travel - X-axis: 145 mm - Z-axis: 465 mm Feed rate - X-axis: 6,000 mm/min - Z-axis: 8,000 mm/min Machine leasing available through Siemens Finance, subject to liquidity.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, proizvajalec krmilnikov: SIEMENS, skupna masa: 6.020 kg, največja hitrost vretena: 10.000 obr/min, moč vretenovega motorja: 13.000 W, število osi: 3, To 3-osno vertikalno obdelovalno središče tipa Optimum F310 je bilo izdelano leta 2016. Ima največjo hitrost vretena 10.000 vrt/min in moč motorja vretena 13 kW. Stroj je opremljen s CNC-krmiljeno rotacijsko mizo z dvema osima vrtenja, ki še ni bila uporabljena. Če iščete visokokakovostne možnosti obdelave, razmislite o nakupu našega stroja Optimum F310. Za več informacij nas kontaktirajte. • Skupna priključna moč: 25 kW • Napetost: 400 V / 50 Hz • Stanje vretena: popravljeno; pokrov ni ponovno nameščen • Stanje stroja: pod napetostjo Dodatna oprema • CNC-krmiljena rotacijska miza (dve osi vrtenja); nikoli ni bila uporabljena. Podezl Edvspfx Amfsgr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 240 mm, pomik po osi Z: 550 mm, skupna višina: 2.000 mm, skupna širina: 1.870 mm, skupna masa: 3.200 kg, proizvajalec krmilnikov: SIEMENS, največja dolžina izdelka: 4.050 mm, število mest v zalogovniku orodij: 12, število osi: 2, Vodoravni stružni stroj, letnik 2015. Ta Optimum OPTIturn S 600 ima premer struženja 320 mm in dolžino struženja 550 mm. Opremljena je s hidravličnim revolverjem z 12 orodnimi mesti in območjem vrtljajev vretena od 30 do 4000 min⁻¹. Če iščete visokokakovostne zmogljivosti struženja, morate razmisliti o nakupu pri nas ponujene Optimum OPTIturn S 600. Za več informacij nas kontaktirajte. • Premer struženja: 320 mm • Dolžina struženja: 550 mm • Premer nad posteljo stroja: 550 mm • Premer nad prečnim suportom: 370 mm • Glavna izvrtina vretena: 76 mm • Izvrtina vretena s hidravlično vpenjalno glavo: 200 mm • Konus vretena: A2-6 • Moč pogonskega motorja: S1 (trajno delovanje) 11 kW; S6-30 % 14,3 kW • Tip revolverja: hidravlični VDI 30 • Število orodnih mest: 12 • Hitri pomik X/Y-os: 30/36 m/min • Konica lunete: MT4 • Hod tulec: 80 mm Pedpszg Eamefx Amfsgr • Premer tulec: 75 mm • Skupna nazivna moč: 30 kVA Tehnične specifikacije Proti-vreteno: Ne Pogonska orodja: Ne

Stanje: novo, Leto izdelave: 2021, Optimum CNC Milling Machine OPTImill F 105 CNC Sinumerik 808D ADVANCE with Accessories (New, Unused Condition): Including accessories: - CNC Tool Starter Set BT 40 - SPW 12 Clamping Tool Set, 58-piece - Hydraulic Milling Vise HCV 105 - 20 liters of Cutting & Drilling Emulsion AQUACUT C1 - 4th Axis Prepared - Carousel Tool Changer with 12 tool stations - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - SIEMENS servo drive on all axes (closed-loop control) - Max spindle speed 10,000 rpm - Machine light in working area - Portable electronic handwheel with enable button and emergency stop switch - Coolant system with 120-liter coolant tank - Tool changing automatic or via push button (electropneumatic tool clamping device) Dimensions and weights: Length approx. 2164 mm Width/Depth approx. 1860 mm Height approx. 2200 mm Weight approx. 2800 kg Drilling & milling performance: Max face mill diameter 70 mm Max end mill diameter 35 mm Rapid traverse speed: X axis 15,000 mm/min Y axis 15,000 mm/min Z axis 15,000 mm/min Electrical data: Connection voltage 400 V Mains frequency 50 Hz Electrical connection: Total connected load 15 kVA Horizontal milling table: Length 800 mm Width 320 mm Distance vertical spindle – table min. 100 mm Distance vertical spindle – table max. 600 mm T-slot size 14 mm T-slot quantity 3 T-slot spacing 100 mm Max. table load 300 kg Accuracy: Repeatability ± 0.008 mm Positioning accuracy ± 0.008 mm Coolant system: Coolant pump drive power 650 W Tank capacity 120 l Pneumatic connection: Operating pressure 7 bar Travel paths: X axis automatic 550 mm Y axis automatic 305 mm Z axis automatic 460 mm Vertical spindle: Spindle taper BT 40 Speed range 10 – 10,000 rpm Continuous motor power S1 7.5 kW Motor power S6-30% operation 11 kW Motor torque S1 48 Nm Motor torque 30% duty S6 70 Nm Feed motor torque: X axis S1 8 Nm Y axis S1 8 Nm Z axis S1 11 Nm Tool changer: Design: Carousel Number of tool positions: 12 tools Max tool diameter 70 mm Max tool length 300 mm Max tool weight 6 kg Tool change time tool-to-tool (T to T) 7 s CNC Tool Starter Set BT 40: - 1 pc. face mill holder, mount 27 mm - 1 pc. keyless drill chuck 1.5 – 16 mm - 2 pcs each of Weldon 6 mm / 20 mm - 1 pc. each of Weldon 8 mm / 10 mm / 12 mm / 16 mm - 1 pc. adapter BT 40 to MK 3 - 4 pcs. collet holders ER 32 - 1 pc. collet wrench ER 32 - 18-piece collet set ER 32 - 1 pc. height setting device - 1 pc. assembly and tooling aid - 15 pcs. pull studs Hydraulic Milling Vise HCV 105: - Sturdy construction for milling - Guideways hardened and ground - Booster system: low force input, high clamping force during operation - Wide clamping range due to locking pin with various hole spacings - Manufactured from high-quality stainless steel - Long service life due to high quality - High clamping force Pjdpfoyxyhfex Amfjgr Jaw height 42 mm Jaw width 107 mm Clamping width 170 mm Length without handle 442 mm Overall height 107 mm T-slots 16 mm Clamping force 24.5 kN Clamping pressure 2500 kg Dimensions and weights: Weight approx. 22 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently on display. Optimill F 110 E CNC milling machine directly from the manufacturer. F 110 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control system stands out for its performance, speed, precision, and long service life. · Heavy-duty construction · High productivity · High reliability · Strongly ribbed, torsion-resistant machine base · Profile guideways with recirculating ball screws for high rapid traverse speeds in all axes · High-torque servo drives on all three axes · Telescopic way covers on all three axes · Automatic lubrication · Spindle oil cooler · Massive, precision-ground milling table with three T-slots, oversized and ground for accuracy · The portable electronic handwheel with enable switch and emergency stop button greatly simplifies program setup · Coolant system with chip flushing device and cleaning gun · Auger-type chip conveyor · Chip trolley · RJ45 port and 230 V power connection · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents the ingress of dust particles · Machine lamp provides over 500 lux in the working area RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote diagnostics AST function; enables easy optimization for higher demands on dynamics and accuracy Absolute encoder / no reference run necessary Higher accuracy Travel: X = 650 mm Y = 400 mm Z = 500 mm Dimensions and Weights Length approx. 2100 mm Width/Depth approx. 2300 mm Height approx. 2750 mm Weight approx. 4100 kg Drilling-Milling Capacity Maximum tool diameter: 90 mm Electrical Data Psdpfxeymkbdo Amfjgr Connection voltage: 400 V Frequency: 50 Hz Electrical connection Total connected load: 20 kW Milling Table (Horizontal) Length: 850 mm Width: 400 mm Distance vertical spindle – table min.: 100 mm Distance vertical spindle – table max.: 600 mm T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 100 mm Maximum table load: 400 kg Accuracy Repeatability: ±0.005 mm Positioning accuracy: ±0.005 mm

Stanje: novo, Brushes - Diameter Ø 250 mm Brush width 40.0 mm Speed range 2850 rpm Operating voltage 400 Volt Total power requirement 1.3 / 1.8 kW Machine weight approx. 36.0 kg Space requirement approx. 415 x 467 x 356 mm Features: - Deburring of single parts and small batches - Deburring of straight round, rectangular, and square tubes, as well as flat materials - Heavy-duty, durable industrial design - Maintenance-free motor - Long service life and smooth operation due to balanced rotor - Equipped with high-quality ball bearings Pedpfx Aoxaamnjmfjgr - Storage shelf for safety goggles - Incl. 1 multipurpose wire brush, wire diameter 0.35 mm - Operating manual included

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is located in the showroom and has only been used for demonstration purposes. Optiturn S400 HSC CNC Premium CNC lathe direct from the manufacturer. S400 HSC – The OPTIMUM premium CNC turning machine with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. Heavy-duty construction · Compact design · SIEMENS servo motors on all axes · Renishaw measuring arm for tool measurement · All servo motors with integrated encoder for maximum accuracy · Main spindle implemented as motor spindle · 45° slant bed for particularly large machining diameters and unobstructed chip discharge into the chip tray · Hydraulic three-jaw chuck Ø 170 mm with soft jaws · Servo tool changer VDI 30 with 12 tool stations · Hardened and precision-ground ball screws for high rapid traverse speeds on all axes · Faster tool change speed · High hydraulic clamping force · Heavy-duty machining without vibration, for automated machining and high efficiency even under extreme conditions · Rigid linear guides ensure long service life with maximum static and dynamic stiffness · Device for manual tool measurement · Heat exchanger · Portable electronic handwheel with enabling button and emergency stop switch makes program setup significantly easier · Belt-type chip conveyor for efficient removal of chips · Work light for complete illumination of the working area · Coolant system with cleaning gun · RJ45 and power interface · EMC (electromagnetic compatibility) · Additional SIEMENS material defect liability and free online/on-site service OSS Plus; see "SIEMENS OSS Plus Package" on page 117 · 1 year basic maintenance contract included Machine specifications Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 25 kVA Spindle Drive motor S1 operation: 11.6 kW Torque drive motor S1 operation: 65 Nm Drive motor S6-30% operation: 14.4 kW Torque drive motor S6-30% operation: 81 Nm Spindle mount: A2-5 Spindle bore: Ø 56 mm Chuck passage: Ø 45 mm Hydraulic chuck: Ø 170 mm Coolant system Coolant pump output: 700 W Tank capacity: 160 liters Hydraulic system Hydraulic pump output: 1.5 kW Tank capacity: 36 liters Machine data Max. turning diameter: 220 mm Turning length: 320 mm Swing diameter over cross slide: 300 mm Swing diameter over bed: 500 mm Slant bed: 45° Speed range Spindle speeds*: 30 - 6,000 min⁻¹ Tool changer Pedpfx Amoymlhrefegr Type: Servo VDI 30 Number of tool stations: 12 Accuracy Repeat accuracy: ±0.004 mm Positioning accuracy: ±0.004 mm Travel X-axis: 180 mm Z-axis: 350 mm Feed force, dynamic X-axis: 3.6 kN Z-axis: 3.6 kN Feed rate X-axis / Z-axis: 30 m/min Motor torque X-axis / Z-axis: 6 Nm Dimensions Length x width x height: 2,000 x 2,250 x 1,550 mm Total weight: 2,600 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently on display. Optimill F 110 HSC Premium CNC Milling Machine, direct from the manufacturer. F 110 HSC – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D Control stands out for its performance, speed, precision, and long service life. · Heavy-duty construction · High productivity · High reliability · Robust, torsion-resistant machine base with strong ribbing · Profile rail with recirculating ball bearings for high rapid traverse speeds in all axes · High-torque servo drives in all three axes · Telescopic way covers on all three axes · Automatic lubrication Podoymka Hepfx Amfegr · Solid, precise milling table with three T-slots, generously dimensioned and precision ground · The portable electronic handwheel with enabling button and emergency stop pushbutton greatly facilitates program setup · Coolant system with chip flush and cleaning gun · Belt-type chip conveyor ensures efficient chip removal · Chip trolley · RJ45 interface and 230 V power connection · Enclosed electrical cabinet with integrated heat exchanger for optimal temperature control and prevention of dust ingress · Machine light in the working area · Additional SIEMENS warranty for material defects and free online/on-site service OSS Plus · 1-year basic maintenance contract included for Germany/Austria/Switzerland Spindle: Inline spindle Machine data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling spindle Drive motor S1 operation: 9 kW Torque, drive motor S1: 57 Nm Drive motor S6-30% operation: 21.2 kW Torque, drive motor S6-30%: 135 Nm Spindle taper: SK 40 / DIN 69871 Optional internal spindle cooling Drive motor S1 operation: 10.5 kW Torque, drive motor S1: 50 Nm Drive motor S6-30% operation: 26.4 kW Torque, drive motor S6-30%: 125 Nm Cooling lubricant system Coolant pump output (2 units): 900 W Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Cleaning pump output: 530 W Milling accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (if adjacent stations are empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool to tool): 2.5 seconds Travel distances X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed drive Rapid traverse (X, Y, Z): 48 / 48 / 32 m/min Motor torque (X/Y/Z): 11 Nm / 11 Nm / 20 Nm Feed forces X/Y/Z: 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds*: 12,000 rpm Pneumatics Air pressure: 6 bar Air consumption per hour: 6–8 kg/m³ Milling table Spindle-to-table distance: 100–600 mm Table (L x W): 850 x 400 mm T-slot size/quantity/spacing: 18 mm / 3 / 100 mm Max. table load: 400 kg Dimensions L x W x H: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently on display and has only been used for demonstration purposes. Optimill F 150 E CNC milling machine, directly from the manufacturer. F 150 E – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 808D Advanced control stands out for its performance, speed, precision, and long service life. - Carousel tool changer with 16 tool positions - All linear guides with stainless steel covers - Central automatic lubrication system - Siemens main spindle motor - SIEMENS servo drives on all axes (closed loop) - Belt-type chip conveyor ensures efficient chip removal - Chip trolley - Maximum spindle speed: 10,000 rpm - Work area machine light - Portable electronic handwheel with enabling switch and emergency stop switch—significantly simplifies program setup - Coolant system with 190-liter coolant tank - Tool change is automatic or triggered at the push of a button - Heavy, precisely machined and large-scale milling table - Large access doors designed to minimize cleaning and maintenance time Pgodpfx Ameymdygofor - “SINUMERIK 808D on PC” software package included. (Practical training software allowing for offline programming and simulation of workpieces on PC. The software can be downloaded free of charge.) SINUMERIK 808 ADVANCED – CNC technology from the market leader, combined with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control system. This compact and user-friendly entry-level solution is designed for simple milling applications. Features such as intuitive operation, commissioning, and easy maintenance make it the ideal basis for equipping CNC machines. Through its technology-specific configuration, the SINUMERIK 808D ADVANCED is perfectly preconfigured for milling. Thanks to hardware and software extensions, it provides sufficient performance for basic milling functions in mold and tool making. Compact and robust Thanks to its panel-based CNC design with minimal interfaces and an IP65-rated control panel, the SINUMERIK 808D ADVANCED is perfectly suited for use in harsh environments. Its compact dimensions enable installation in smaller machines. INCLUDED: - RJ45 Ethernet port - 8.4” LCD color display with 800 x 600 resolution - Prepared for remote maintenance - AST function: allows for easy optimization in tasks requiring greater dynamics and accuracy - Absolute encoder / No reference run required - Higher precision Travel distances: X = 750 mm Y = 500 mm Z = 500 mm Dimensions and weights: Length approx. 3,420 mm Width/Depth approx. 2,050 mm Height approx. 2,400 mm Weight approx. 4,500 kg Drilling/Milling performance: Maximum face mill diameter: 80 mm Maximum shank cutter diameter: 38 mm Electrical data: Supply voltage: 400 V Mains frequency: 50 Hz Total connected load: 15 kW Horizontal milling table: Length: 900 mm Width: 500 mm Vertical spindle – table distance min.: 100 mm Vertical spindle – table distance max.: 600 mm T-slot width: 18 mm Number of T-slots: 5 T-slot spacing: 80 mm Maximum table load: 350 kg Accuracy: Repeatability: ±0.005 mm Positioning accuracy: ±0.01 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Optimum OPTIdrill RD 6 Highly precise, heavy-duty radial drilling machines of top quality. Ideal for flexible use in both single-part and series production. • Versatile applications including drilling, reaming, and tapping • Electrically braked motor • 24V DC electrics and dual-channel safety circuit in accordance with DIN EN 12717 • Heavy-duty, high-grade cast-iron construction • Wide outreach thanks to horizontally adjustable machine head • Clearly arranged control panel • Smooth-running swivel and travel axes • Elaborately engineered column swivel with optimized clamping for maximum stability and minimal alignment deviation • Rigid, torsion-resistant boom construction • Boom height adjustment via powerful motor drive and lift spindle • Drill head gearbox operates in oil bath • Hardened and precision-ground boom guideways • Hardened and precision-ground chrome-nickel steel gear wheels for smooth and quiet gearbox operation • Drill head and column can be clamped or released together or separately • Forward/reverse operation • Large, solid, and precise drill table • Hardened and ground clamping table with parallel T-slots • Integrated machine lamp • Overload protection • Thick-walled cast column ensures high running smoothness and stability • LED lamp • Coolant system with integrated tank in machine base RD 6 / RD 7 • Column is clamped hydraulically Psdpfx Aowa Tc Sjmfegr Dimensions and Weights: Column diameter: 320 mm Length approx.: 2670 mm Width/depth approx.: 1120 mm Height approx.: 2760 mm Weight approx.: 3200 kg Boom Arm: Swivel angle: 180° Drilling Capacity: Drilling capacity in steel (S235JR): 50 mm Continuous drilling capacity in steel (S235JR): 45 mm Drill Table: T-slot size: 14 mm T-slot quantity: 4 T-slot spacing: 180 mm Max. spindle-to-table distance: 1420 mm Clamping table length: 630 mm Clamping table width: 500 mm Clamping table height: 500 mm Clamping table T-slot size: 22 mm Clamping table T-slot quantity: 3 Clamping table T-slot spacing: 150 mm Min. spindle-to-clamping table distance: 0 mm Max. spindle-to-clamping table distance: 910 mm Min. spindle-to-table distance: 465 mm Speed Range: Spindle speed range: 44 – 1023 rpm Number of speed ranges: 12 Electrical Data: Total connected load: 6.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Machine Base: Working surface length: 2550 mm Working surface width: 970 mm Motors: Spindle drive motor power: 4 kW Boom height adjustment motor power: 1.5 kW Coolant pump drive motor power: 90 W Hydraulic clamping drive power: 0.75 kW Spindle: Quill stroke: 270 mm Spindle taper: MK5 Quill feed rate: 0.06 – 0.2 mm/rev Quill feed rate steps: 3 Travel: Drill head (horizontal travel): 1250 mm Boom lift (vertical travel): 680 mm Max. spindle-to-column distance: 1600 mm Min. spindle-to-column distance: 350 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine is on display. Optimill F 300 HSC Premium CNC milling machine direct from the manufacturer. F 300 HSC – The OPTIMUM premium CNC milling machine equipped with the Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. • Heavy-duty design • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile rail guides with roller bearings in all axes for high load capacity • High-torque servo drives mounted directly to the ballscrews in all three axes • Precision-ground, preloaded, high-performance ballscrews for rapid traverse speeds in all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with up to 15,000 rpm and inline spindle • Solid, precise milling table with five T-slots, generously dimensioned and precision-ground • Portable electronic handwheel with enabling button and emergency stop button greatly simplifies program setup • Tool changer with double gripper and 30-tool capacity • Coolant system with chip flushing and cleaning pistol • Through-spindle coolant supply at 20 bar • Belt-type chip conveyor for efficient chip removal • Chip trolley • Oil separator • Work area machine lamp • Additional Siemens package: material defect liability and free Online-/On-site-Service OSS Plus • 1-year Basic maintenance contract included in DE/AT/CH • Control system features • 15.6" color display • 16:9 format • Complete package • Safety Integrated • Remnant material detection and processing • ShopMill step programming • Network drive management • 3D simulation • Path tracing • Siemens OSS PLUS add-on package • 12 months; item no. 3589020 • 24 months; item no. 3589021 • 36 months; item no. 3589022 • Equipment details • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 15,000 rpm • Dimensions and weights • Length approx. 2856 mm • Width/depth approx. 2300 mm • Height approx. 2850 mm • Weight approx. 6500 kg • Rapid traverse speed • X-axis 36 m/min • Y-axis 36 m/min • Z-axis 32 m/min • Electrical data • Connection voltage 400 V • Mains frequency 50 Hz • Electrical connection • Total connected load 30 kVA • Horizontal milling table • Length 1200 mm • Width 600 mm • T-slot size 18 mm • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg • Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm • Travel • X-axis automatic 1000 mm Pgsdpfxeymd Epo Amfjr • Y-axis automatic 620 mm • Z-axis automatic 630 mm • Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 15,000 rpm • Drive motor power S1 continuous operation 20 kW • Drive motor power S6-30% operation 52.4 kW • Drive motor torque S1 continuous operation 96 Nm • Drive motor torque S6 30% operation 250 Nm • Feed force • Feed force X-axis 6.68 kN • Feed force Y-axis 6.68 kN • Feed force Z-axis 12.01 kN • Feed motor torque • X-axis continuous operation S1 20 Nm • Y-axis continuous operation S1 20 Nm • Z-axis continuous operation S1 36 Nm • Tool changer • Double arm gripper • Number of tool stations 30 • Max. tool length 300 mm • Max. tool weight 8 kg • Tool-to-tool change time 2.5 s

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optimill F200 ECO Premium CNC milling machine, direct from the manufacturer. F200 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system sets itself apart through its performance, speed, precision, and long service life. Model: F200 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling spindle belt drive Machine data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling spindle Drive motor S1 duty cycle: 9 kW Drive motor torque S1 duty cycle: 57 Nm Drive motor S6 30% duty cycle: 17.1 kW Drive motor torque S6 30% duty cycle: 118 Nm Spindle taper: BT40 Coolant system Coolant pump power: 900 W Max. delivery rate: 35 l/min Tank capacity: 116 liters Cleaning pump Milling precision Repeat accuracy: 0.008 mm Positioning accuracy: 0.004 mm Tool changer Type: Double arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent pockets empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time: tool to tool 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed drive Rapid traverse, X/Y/Z axes: 48 / 48 / 48 m/min Motor torque X / Y / Z axis: 16 Nm / 16 Nm / 20 Nm Feed forces X / Y / Z axis: 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds*: 10,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6 - 8 kg/m³ Milling table Spindle-to-table distance: 100 – 650 mm Table length x width: 1000 x 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Max. table load: 500 kg Pedpfsymd Nbjx Amfogr Dimensions Length x width x height: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg Features • Linear guides with precision ball screws for high rapid traverse speeds on all axes • Telescopic way covers on all three axes • Automatic lubrication • Portable electronic handwheel with enabling switch and emergency stop • RJ45 and 230 V power connection • Machine light in work area • Cleaning gun • THK ball screws and linear guides • Chip flushing • Spindle head cooling (machining area) • Electrical cabinet • Arm-type tool changer • SW24 • CE *More options available