Omarica Za Orodje Z Vrtalnimi Pušami nakup rabljenega (97.825)

Stanje: novo, Bending length: 1550 mm Sheet thickness: 3.5 mm Upper roll diameter: 110 mm Technical Data: - Rear roll driven by motor - Cone bending device - Entire frame constructed from St 52 steel - Main motor with brake system Cedpfxjd Ab N Do Aqcegu - Upper and lower rolls driven by electric motor, gearbox, and gear system - Mobile control panel - Cast iron body - Manual movement of rear and lower rolls - Complies with CE standards Options: - Upper roll driven by electric motor EURO 1,166.00 - Digital position display for rear roll EURO 1,010.00 - Hardened rolls EURO 995.00 - Special voltage EURO 480.00 - Material feed table - Lower roll driven by electric motor We have numerous references!

Stanje: novo, Bending length: 1050 mm Sheet thickness: 5 mm Top roller diameter: 110 mm Technical specifications: - Rear roller motor-driven Cgsdpfx Ajd Ab N Hjqcou - Conical bending device - Hardened and polished rollers - Entire body constructed from St 52 steel - Main drive motor with brake system - Top and bottom rollers driven by electric motor, gearbox, and transmission system - Portable control panel - Cast iron frame - Manual adjustment of rear and lower rollers - Compliant with CE standards Options: - Top roller driven by electric motor: EUR 1,166 - Digital display for rear roller position: EUR 1,010 - Hardened rollers: EUR 725 - Special voltage: EUR 480 - Material feed table - Bottom roller driven by electric motor We have numerous references!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, For sale: ERLENBACH ESA 5 cutting line with VIRO packer, model PPZA-1300/6 Technical data and year of manufacture: - Erlenbach ESA 5: year 2013 - VIRO model PPZA-1300/6: year 2011 - Condition: Used for less than a month (like new) - Maximum block dimensions (L x W x H): 5100 x 1260 x 1260 mm - Cutting speed: 1.5 m/min - Waste grinding system: top, bottom, sides Additional information: 1. Full oscillating wire cutting at all stations The machine is equipped with an oscillating wire system operating at every cutting stage: - Horizontal cutting: max. 61 oscillating wires - Vertical (side) cutting: max. 11 wires with oscillation system - Down-cutter station (top-down cutting for packs): also with full wire oscillation 2. Automatic wire setting The automatic wire positioning system operates at key stations: - On horizontal cutting - On the down-cutter station (top-down cutting) 3. Automatic adaptation to block length (5m / 4m) The machine is factory-equipped to handle both 5 meter and 4 meter blocks. Automatic actuator at the down-cutter station: After selecting the appropriate function in the menu (for 5m or 4m blocks), the machine automatically adjusts the clamp actuator and the supporting barrier. This ensures that side front waste, when top-down cutting, always falls exactly in the designated, correct place. No manual adjustments are required. Cjdpfx Asv Hm A Tsqcogu

Stanje: rabljeno, Sander for electronic components, brand Promac, complete with soundproof cabin, used. This machine is ideal for coarse sanding (grit size 6 to 50, for planing) of elements on 4 sides (see technical specifications in the photos). Cedpfx Ajy Ud Rvoqcjgu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Cgjdjt Dx U Sjpfx Aqceu Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery Cedpfxsfh Tmmj Aqcegu - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Stanje: skoraj kot novo (rabljeno), 🧰 Caractéristiques du produit Fin de série, disponible immédiatement ! • Fabricant : Nedcon • Couleur : Cadres pré-galvanisés, lisses galvanisées à chaud • État : Comme neuf • Cadres : 12 pcs pré-montés 700 x 110 cm • Largeur du cadre : 10 cm • Lisses : 100 pcs avec une portée utile de 269 cm • Sécurité : 200 pcs goupilles de sécurité galvanisées Cgjdpfx Aqow Dptzjcou • Fixation : 48 pcs ancres béton Hilti • Capacité de charge : 3 000 kg par niveau • Charge par travée : 12 000 kg 💰 Prix 4 500 € net hors TVA • Frais de port : à déterminer pour toute l'Europe • Délai de livraison : disponible immédiatement • Visite et enlèvement : à tout moment sur rendez-vous Plus de 5 000 mètres linéaires de rayonnages à palettes de nombreux fabricants en stock en permanence. (Modifications et erreurs dans les données techniques, informations et prix ainsi que vente préalable possibles ! Voir nos CGV, tous les prix hors TVA départ stock.)

Stanje: dober (rabljeno), Interna številka artikla: 25066 24 kosov skrčljivih vpenjalnih glav HSK-A63 Proizvajalec: npr. Haimer / SECO 3x D4 3x D6 3x D8 3x D10 Cgjdpfx Aqoxdlpcocou 3x D12 3x D14 3x D16 3x D20

Leto izdelave: 2015, stanje: rabljeno, Razstavni eksponat Skladiščna lokacija: Sonnefeld Cgjdpfx Aqev Dat Tocju

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1985, Ravna prikolica CTC SPA RP26S Prva registracija: 1985 3 osi Pnevmatike v stanju 40/50 % Cgedpfxezad Tae Aqceu Dolžina: 9,68 m, širina: 2,50 m, nosilnost: 19.500 kg Dvojne hidravlične rampe Splošno dobro stanje Na voljo takoj OVREDNOTIMO MENJAVE VOZIL VSEH ZNAMK, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, Z OPREMO CIFA, SERMAC, PUTZMEISTER; ALI GRADBENE STROJE CATERPILLAR, FIAT HITACHI, KOMATSU

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 17.410 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 400149, FLOW Waterjet Machine INTEGRATED FLYING BRIDGE We are selling our Flow waterjet machine, including a stainless steel water tank, a 6000 bar pump, sand and abrasive feed system. The sand filter (wastewater treatment) is optional and not included in the price. The machine has been in operation with us since 2008 and is being replaced by a new purchase. The machine is in very good condition, fully functional, and can be inspected at any time. Manufacturer: Flow International Corporation, 1635 Jeffersonville, Indiana 47130, USA Year of manufacture: 02/2008 Model/Type: IFB INTEGRATED FLYING BRIDGE Serial No.: 400149 Transport dimensions: Total height: 220 cm Cgedpfeza A Ayox Aqceu Total width: 480 cm Total length: 450 cm Tank size: Length: 425 cm Width: 255 cm Cutting area: Length: 365 cm Width: 182 cm Datasheets for the machine, pump, and software are available (PDF on request). Inspection before purchase is possible and encouraged. Delivery upon request. Sale as is, as shown in the photos.

Stanje: novo, Leto izdelave: 2026, Working width: 600 mm Working height: 220 mm Minimum workpiece length: 250 mm Units: 4 1. Saw cut unit (Random System): Saw cut optic 2. Brush: Metal, diameter 220 mm 3. Brush: Tynex grit 60, diameter 220 mm 4. Brush: Tynex grit 120, diameter 220 mm Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Motor power, saw roughing unit: 1.1 kW Motor power, brushes: 4 kW Motor power, feed: 0.37 kW Machine length: 2,800 mm Machine width: 1,500 mm Cgjdpfx Aqjhwrp Rocsu Machine height: 1,600 mm Weight: 1,500 kg

Stanje: rabljeno, Column Drilling Machine, Geared Head Drill Press ALZMETALL Type AB 40 ST Production Drill Serial No. 750 Year of manufacture: 1994 Drilling capacity: 40 mm Spindle taper: MT 4 - Short quill Throat depth: 325 mm Quill travel: 200 mm Table size: 740 x 460 mm Drill head height adjustment: 700 mm Distance spindle-table: max. 1015 mm Spindle speed: 56 - 2500 rpm, 12 gear steps Automatic feed: 0.15 - 0.2 - 0.3 - 0.36 mm/rev Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Spindle speed adjustable via 12-step gear transmission - Drilling and tapping function with forward/reverse rotation - Electric foot switch for reversing spindle direction to left-hand rotation during tapping interruption - Rapid feed via hydraulic quill movement - Semi-automatic operating sequence: rapid approach – working feed – rapid return - Drill head height adjustment via hand crank - Table height adjustment via hand crank (table height adjustable from 740 to 1170 mm) Cgodpfx Asza Hzgsqcsu - Coolant device included - Control cabinet mounted on the rear of the machine - Mounted on steel plate (1300 x 750 x 15 mm) with machine feet - Quick-action drill chuck METABO 3 to 16 mm - Operating instructions and electrical diagram Overall height with drill head in top position: 2750 mm Space required (L x W x H): 1400 x 850 x 2300 mm Weight: 1250 kg Good condition

Stanje: rabljeno, Naprava za dovod zraka tip 3072 A 7300/3650 m³/h, največja grelna moč 83 kW, vroča voda 90/70 °C. Naprava za odvod zraka tip 72, 7000/3500 m³/h. Lokacija skladišča: Nattheim. Csdpfx Aew I A N Aoqcjgu

Stanje: pripravljen za uporabo (rabljen), Brusilnik orodij, brusilnik svedrov, Schanbacher S3-50 Codjx Dbltjpfx Aqcsgu Proizvajalec: Schanbacher Tip: S3-50 Leto: 2012 Dimenzije: 460 × 600 × 1260 mm Premer svedra: 3–50 mm; Kot konice: 90°–140° Vključuje: zaščitni pokrov, sistem za odvajanje prahu

Stanje: dober (rabljeno), Leto izdelave: 2008, Proizvajalec: EBG-TECH Tip: BMW N-63 Leto: 2008 Csdpfx Aqjf Ecwzjcsgu Največji premer diska: 300 mm Skupne dimenzije: 1900 x 1200 x 2900 mm Teža: 1750 kg

Stanje: rabljeno, Leto izdelave: 1999, Clamping force: 3150 kN Mounting platen: 900x900 mm Tie-bar distance: 550x550 mm Machine weight: approx. 15.5 t Clamping stroke: 500 mm Ejector force: 159 kN Csdpfovfhrtox Aqcegu Ejector stroke: 120 mm Mold height: 300–700 mm Tie-bar diameter: 110 mm Injection force: 158 kN Injection stroke: 250 mm Injection plunger diameter: 70, 80, 90, 100 mm Casting volume (DIN 24480): 514, 791, 1105, 1455 cm³ Specific injection pressure: 410, 316, 249, 201 kp/cm² Corresponding parting surface: 768, 996, 1265, 1597 cm² Eject stroke: 300 mm Used die casting machine DAM 315 S with Datacontrol control system, suitable for magnesium alloy processing. Available from used machinery stock. The machine is equipped with a Rauch electric furnace, type MMO 315E. Spray device not included. Manufacturer’s recommendation: repair or overhaul at the refurbishment facility. Scope of work can be agreed upon as required.

Stanje: novo, Leto izdelave: 2024, Clamping force: 2,200 kN Clamping plate: 755 x 755 mm Tie bar spacing: 500 x 500 mm Machine weight: approx. 8 t Clamping stroke: 430 mm Ejector force: 110 kN Ejector stroke: 100 mm Mold height: 250–600 mm Tie bar diameter: 85 mm Casting force: 130 kN Casting stroke: 175 mm Plunger diameter: 70, 80, 90 mm Casting volume (DIN 24480): 450, 636, 856 cm³ Specific casting pressure: 335, 260, 203 kp/cm² Corresponding parting surface: 656, 846, 1,078 cm² Return stroke: 230 mm Machine equipment: 1.1.1 Motorized safety door on casting side right 1.4.0 Machine mountings 1.5.4 Machine interior lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector assistance packages 2.1.2 Core pull device M2 Cgodevvx Hcepfx Aqceu 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of the clamping unit 3.0.1 Casting assistance packages 3.0.1.2 Casting assistance package Technology 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill casting system 3.4.5 Simplified plunger removal 3.5.2 Electric nozzle and casting container heating 3.5.3 Pluggable connections for electric nozzle and casting container heating 4.3.1 Additional heat exchanger 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.4 Integrated water circuit control 2+8 circuits 5.1.1 Machine control DATADIALOG – Shot Stop 5.1.5 Maintenance advantage package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for part removal 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum device 6.1.7 Frech interface for doorman function 6.5.2 RSD equipment package with switch 7.2.3.3 Spraymotion 811 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent tank TD 20 7.4.0.6 Spray bar CR 458

Stanje: novo, Leto izdelave: 2015, Two-spindle machine with two turrets, maximum spindle speed 6,000 rpm, equipped with a vibratory feeder, robotic handling unit, and post-process measuring unit. Fanuc control system. Dimensions: 2400 x 1650 x 1790 mm (main unit). Cjdpfxslgy U Eo Aqcjgu

Stanje: rabljeno, Leto izdelave: 1987, Deckel FP1 Aktiv s Heidenhain digitalnim prikazovalnikom za 3 osi, 3 aktivne osi, togo mizo, vreteno SK40 S20x2. Centralno mazanje, navodila za uporabo. V dobrem in delujočem stanju, pripravljen za uporabo. Po dogovoru možen prikaz v obratovanju. Csdjzbykwepfx Aqcogu

Leto izdelave: 2003, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN.: 19-03-028, Granitna spodnja miza s pnevmatsko izravnavo nivoja, vključno s podnožjem s 3 predali proizvajalec: Integrated Dynamics Engineering Cgjdpfx Aeya Dttjqcsu Leto izdelave: 2003 Serijska številka: 19-03-028 Dolžina: 80 cm Širina: 80 cm Višina: 86 cm (vključno s podnožjem)

Stanje: rabljeno, Technical details: Voltage: 360–730 V / 50 Hz Cjdsu N Afyopfx Aqcogu Approximate machine weight: 0.150 t

Stanje: rabljeno, Technical details: Number of drawers: 6 units Cgsdpfju Nkylsx Aqceu Tool holders: 36 units Dimensions HxWxD: 930x710x650 mm Weight: approx. 20 kg The cart is suitable for tool holders SK40 and/or SK50. Organize as you wish! Sale without tools shown in the pictures. As per illustration. *

Stanje: rabljeno, Technical details: Number of drawers: 4 pcs. Tool holder taper: SK 40 Dimensions (L x W x H): approx. 0.6 x 0.75 x 1.16 m Very well-maintained tool trolley made of tubular steel construction, bolted together, incl. comparable tools. The tool holder compartments are slotted in, interchangeable, and removable. The trolley is mobile, equipped with 4 wheels, 2 of which are fixed and 2 swivel wheels with parking brakes. Cgedpfxsu Nkzce Aqcou Handrails above the trolley. Offer and sale as described.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, moč: 2,5 kW (3,40 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, skupna širina: 24.000 mm, skupna dolžina: 52.000 mm, skupna višina: 10.500 mm, skupna masa: 2.000 kg, zračni tlak: 6 letvica, priključek za stisnjen zrak: 6 letvica, premer vrtanja: 180 mm, delovna višina: 1.050 mm, 8. Sept. | Bohrmaschinen METRAL Doppelkopf-Bohrmaschine TD3-2000, Baujahr 2003, 2023 komplett überholt Technische Daten: Glasstärke: 2–50 mm Bohrdurchmesser: 3–180 mm Gewicht ohne Rollentisch: 775 kg Anschlussleistung: 2,5 kW Abmessungen ohne Rollentisch: 1,3 x 1,7 x 1,2 m Abmessungen Rollentisch: 5,2 x 2,4 m / Höhe 1050 mm / ±25 mm Cgedpfsrg E Hcsx Aqcju Maximaler Abstand Maschinenrahmen zu Bohrzentrum: