Navpična Stružnica Z Revolverjem nakup rabljenega (47.818)

Stanje: dober (rabljeno), Višina konic: 125 mm Razdalja med konicami: 800 mm Najv. premer struženja nad posteljo/nad vodilom sani: 280/245 mm Vpenjanje vretena, navoj po DIN 800 Premer izvrtine vretena: 24 mm Nedpfxsyu R H Nj Ah Uewg Brezstopenjska regulacija obratov vretena: 26 - 2000 vrt./min 36 vzdolžnih pomikov: 0,019 - 0,528 mm Metrični navojni koraki: 0,25 - 6 mm 44 colski navoji: 4 - 112 nitk/" Električni priklop: 380 V, 0,7/1,4 kW Potreben prostor: Teža pribl.: 500 kg

Stanje: rabljeno, L + Z stružnica WAFUM tip TUD 40 Nsdjw Uf Hwjpfx Ah Ujwg Št. št.: 35689 Leto izdelave: 1975 Razdalja med konicama: 1500 mm Premer struženja nad posteljo: Ø 440 mm Višina konice nad posteljo: 220 mm Višina konice nad suportom: Ø 125 mm Vrtina vretena: Ø 56 mm Hitrost vretena: 18 - 1800 min⁻¹, 36 stopenj Prirobnična prirobnica: kratek stožec DIN 55027, velikost 6 Notranji stožec konjička: MK 5 Pogonska moč: 4 in 6,7 kW - Hitrost vretena preko 2 motornih hitrosti in 18 stopenj menjalnika - 3-čeljustna vpenjalna glava Ø 315 mm BISON z 2 kompleti čeljusti (obračalne in vrtalne) - Hitromenjalni nosilec orodja MULTIFIX velikost B z 2 izmenljivima kasetama - Fiksna luneta z drsnim ležajem, notranji Ø 125 mm - Sledilna luneta z drsnim ležajem, notranji Ø 100 mm - Vodilo za struženje ozkih stožcev z avtomatskim vzdolžnim podajanjem - 1 kos sledilne centrirne konice - Dvignljiv zaščitni pokrov vpenjalne glave Prostorske zahteve D x Š x V: 3100 x 1200 x 1450 mm Teža: 3000 kg Dobro stanje

Stanje: rabljeno, Leto izdelave: 2007, Tehnične podrobnosti: Premer čelne plošče: 1600 mm Skupna potrebna moč: 80 kW Teža stroja pribl.: 25 t Potrebni prostor pribl.: 4,4 x 4,62 m Premer obdelovanca - maks.: 2000 mm Največji premer pri čelnem struženju: 1800 mm Vpenjanje orodja: ISO50 Nsdpfex Aq E Hsx Ah Uowg Stroj je bil redno vzdrževan in je v tehnično dobrem stanju. Z osjo C.

Stanje: rabljeno, Leto izdelave: 1993, Interna številka artikla: 26036 Stružnica Weiler Praktikant 160B Leto izdelave: 1993 Višina konice: 160 mm Razdalja med konicama: 650 mm Hitrost vretena: 48–2.500 obr/min Vpenjalna odprtina vretena: 40 mm Stroj je opremljen z naslednjim: - 3-osni digitalni prikazovalnik (Prikaz Z0 ne deluje, verjetno je poškodovana merilna letev) - Multifix "A" osnovni nosilec - Vpenjalna glava MK3 - Tridelna vpenjalna glava Garant 160 (vklj. z izmenljivimi čeljustmi) - Luneta - Različna izmenljiva zobniška kolesa - Navodila za uporabo / dokumentacija o servisih ipd. Stanje: Vse prestave menjalnika se lahko gladko prestavljajo. Glavno vreteno teče zelo mirno tudi pri visokih obratih. Ležišče ima manjše brazgotine. Mere (D x Š x V): 180 x 90 x 170 cm Teža: ca. Stroj je popolnoma funkcionalen in ga je mogoče po dogovoru ogledati pod elektriko na več kot 500 m² ogrevane skladiščne površine. Njdpfxsy D N Dae Ah Uswg

Stanje: pripravljen za uporabo (rabljen), Colchester Master 3250 Lead-/Feed-Screw Lathe Engine Lathe Metalworking Lathe Njdpfx Ahjy Nknkj Uowg Swing over bed: 350 mm Swing over cross slide: approx. 196 mm Centre height: 170 mm Spindle bore: 42 mm Spindle speed: approx. 20–3250 rpm Distance between centres: 1250 mm Main motor: 7.5 kW (10 HP) Threads: Metric pitch 0.2–14 mm (51) Inch threads T.P.I. 2–56 (56) Module pitches 0.2–3.5 (20) Diametral pitch (D.P.) 8–56 (20) You are welcome to visit for an inspection. We are happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and also take a look at our other offers. Company names and trademarks mentioned are the property of their respective owners and are only used for identification and product description purposes. Deviations from technical data or errors in the article description may occur and are subject to change.

Stanje: dober (rabljeno), Leto izdelave: 2006, številka stroja/vozila: 66078, TECHNICAL DETAILS Control: SIEMENS SINUMERIK 840 Spindle speed: 5,500 rpm Swing diameter: 260 mm Travel distance - X axis: 626 mm Travel distance - Z axis: 250 mm Spindle bearing diameter: 32 mm Njdpfxjwfdddj Ah Uowg Rated speed: 1,200 rpm Rapid traverse speed X axis: 60 m/min Rapid traverse speed Z axis: 30 m/min Turret positions: 12 stations MACHINE DETAILS Machine length: 1,685 mm Machine width: 2,400 mm Machine height: 2,850 mm Machine weight: 8 t EQUIPMENT - Spindle head with short taper, DIN 55026: A6 - WPS pallet conveyor - KNOLL system (2010) - SAUTER turret (12 stations) - Documentation available

Stanje: rabljeno, Leto izdelave: 2012, Turning diameter: 320 mm Turning height: 750 mm Control: Siemens Max. spindle speed: 4,500 rpm Main spindle drive power: 26.8 / 20.9 kW Max. torque: 256 / 200 Nm Spindle bore: 52 mm Spindle nose: KK A6 (DIN 55026) Max. chuck diameter: 315 mm Nwsdpfx Aexq Hkzeh Uog Number of tool stations: 8 positions Tool holder: Capto C5 Max. workpiece diameter: 50 mm Max. workpiece weight: 0.5 kg X-axis travel: 450 mm Z-axis travel: 300 mm Rapid traverse (X/Z): 45 / 40 m/min Total connected load: 68.3 kW Machine weight: approx. 11.0 t Space requirements: approx. L 3.7/4.2 x W 1.6 x H 3.0 m According to our assessment, the machine is in very good condition and can be inspected under power by prior appointment. Accessories, illustrated tools, and clamping devices are only included in the scope of delivery if mentioned in the additional information. Technical specifications and details are subject to change and errors. Prior sale reserved!

Stanje: rabljeno, Leto izdelave: 2001, Premer čelne plošče 850 mm Premer vrtenja 1200 mm Višina struženja 1000 mm Krmiljenje Siemens tip 840 D Menjalec orodij 36 pozicij X-hod 870 mm Z-hod 1020 mm Tehnični podatki so navedeni s strani proizvajalca oz. upravljavca in so za nas nezavezujoči. Vmesna prodaja pridržana; veljajo izključno naši splošni pogoji poslovanja in prodaje. O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnih površin, kapaciteta dvigala 70 t več kot 10.000 artiklov dodatne opreme za vašo delavnico Nwsdjy Swhiepfx Ah Ueg Če želite prodati stroje, proizvodne linije ali vaše podjetje, nas kontaktirajte. Dodatne ponudbe najdete na naši spletni strani. Ogledi možni po dogovoru. Veselimo se vašega obiska. Vaša Markus Hirsch ekipa

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, višina struženja: 1.400 mm, teža obdelovanca (maks.): 10.000 kg, premer struženja nad prečnim suportom: 2.000 mm, premer struženja: 2.000 mm, premer čelne plošče: 1.600 mm, skupna višina: 5.190 mm, skupna širina: 5.285 mm, skupna dolžina: 4.515 mm, premer vrtljive mize: 1.600 mm, največja hitrost vrtenja: 280 obr/min, obremenitev mize: 10.000 kg, trajanje garancije: 24 meseci, premer obdelovanca (maks.): 2.000 mm, skupna masa: 34.000 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Vertical carousel turning machine in flat guide design with comprehensive full equipment: WITH MILLING FUNCTION - Milling spindle 2000 rpm SK50 22 kW - C-axis 0.001 degree - Full enclosure - Chip conveyor - Internal coolant supply - Fanuc control - 24 tools - 12 milling tools - Manual Guide I - Tool holder package - Electronic handwheel Nodpfjvty Ddsx Ah Uowg - Signal light - Manual 3-jaw faceplate 1600 mm - Tool measurement Renishaw - Workpiece measurement Renishaw - Glass scales on X and Z axes - 24 months warranty

Leto izdelave: 2007, stanje: dober (rabljeno), Manufacturer: Okuma Model: LVT-300 M Control: OSP-P200L Year of manufacture: 2007 X-axis travel: 210 mm Z-axis travel: 360 mm Main spindle power: 22 kW Driven live tools: 7.5 kW / 3,000 rpm Infeed table Nwedoku Aaaspfx Ah Ueg Outfeed table Set of chuck jaws Set of tool holders Chip conveyor Coolant system: 9 bar Grundfos Specifications Metric Imperial (US Standard) Max. turning diameter: 280 mm Table diameter: Ø 210 mm Horizontal slide travel: 360 mm Tool changer: 12 stations Spindle speed: 4,000 rpm C-axis: 360,000° Dimensions (Approximate) Currently, there are no dimensions available for this machine. Please note: The information on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. While the information is provided in good faith, its accuracy cannot be guaranteed. Therefore, no warranties or contractual commitments are implied. We recommend verifying all critical details independently.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, stružna dolžina: 755 mm, izvrtina vretena: 102 mm, potovalna razdalja osi X: 260 mm, največja hitrost vrtenja: 2.800 obr/min, skupna višina: 2.100 mm, skupna dolžina: 4.200 mm, skupna širina: 2.100 mm, skupna masa: 5.650 kg, CNC lathe with C axis DOOSAN - PUMA GT3100M MACH-ID 9615 Manufacturer: DOOSAN Model: PUMA GT3100M Control: Siemens 828D ShopTurn Year of manufacture: 2024 Max. turning diameter: 790 mm X-axis travel: 260 mm Z-axis travel: 755 mm Spindle bore: 102 mm Spindle speed: 2800 rpm Spindle power: 35 kW Tool changer: 24 stations Driven tool speed: 5000 rpm Driven tool power: 7.5 kW Chip conveyor: Yes Tool eye: Yes Tailstock quill taper: 5MT Tailstock quill travel: 100 mm Tailstock quill diameter: 100 mm Length: 4200 mm Width: 2100 mm Height: 2100 mm Weight: 5650 kg Nedpfx Aey N Sb Eoh Ujwg Please note: The information provided on this page has been supplied to the best of our knowledge and, where possible, sourced from the manufacturer. The details are given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend that you verify all important details.

Stanje: dober (rabljeno), potovalna razdalja osi X: 798 mm, pomik po osi Z: 358 mm, Max. turning diameter: 665 mm X-axis travel: 798 mm Z-axis travel: 358 mm Spindle bore: 360 mm Spindle speed: 500 rpm Spindle power: 45 kW Quill taper: 6 MK Quill stroke: 230 mm Quill diameter: 150 mm Length: 8100 mm Width: 275 mm Height: 2100 mm Njdpfx Aewxb Ersh Uowg Weight: 13,000 kg

Stanje: dober (rabljeno), Leto izdelave: 2007, stružna dolžina: 1.065 mm, premer struženja: 470 mm, Chip conveyor SMW 315 3-jaw chuck 2 x Radial driven tool holders 2 x Axial driven tool holders Spindle bore: 80 mm BMT tooling system Tool measuring probe Spindle hours: 6,960 / Operating hours: 6,270 Max. turning diameter: 470 mm X-axis travel: 260 mm Z-axis travel: 1,065 mm Spindle bore: 80 mm Spindle speed: 4,200 rpm Spindle power: 30 kW Tool changer: 12-position BMT tool system Driven tool speed: 6,000 rpm Nwedpfxewq Rpws Ah Ujg Driven tool power: 7.1 kW Length: 3,310 mm Width: 1,900 mm Height: 1,970 mm Weight: 6,100 kg

Stanje: dober (rabljeno), CNC stružnica z Y-osjo Geminis Goratu - GHT-4 G4-800 Maks. premer struženja: 800 mm Dolžina: 7000 mm Širina: 2500 mm Višina: 2500 mm Teža: 10.000 kg Prosimo, upoštevajte: Informacije na tej strani smo zbrali po najboljšem vedenju in vesti ter, kolikor je mogoče, od proizvajalca. Podatki so podani v dobri veri, vendar natančnosti ni mogoče zagotoviti. Zato to ni zavezujoča ponudba ali pogodbena določila. Priporočamo, da preverite vse pomembne podrobnosti. Nwedpfxjygv Euo Ah Uog

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, stružna dolžina: 700 mm, potovalna razdalja osi X: 205 mm, pomik po osi Z: 700 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.800 mm, skupna dolžina: 6.000 mm, skupna širina: 3.900 mm, skupna masa: 9.800 kg, Complete machining with double spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg load capacity Chip conveyor Paper band filtration system with pressure tank Max. turning diameter: 400mm X-axis travel: 205mm Z-axis travel: 700mm Spindle bore: 62mm Spindle speed: 6000 RPM Spindle power: 22kW Sub-spindle speed: 6000 RPM Sub-spindle through hole: 62mm Sub-spindle power: 15kW Tool changer: 16 positions Driven tool speed: 6000 RPM Lower turret positions: 16 Nsdsyn Em Rjpfx Ah Uewg Driven tool speed: 6000 RPM Driven tool power: 7kW Chip conveyor: yes Tool Eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is provided in good faith, however, accuracy cannot be guaranteed. Accordingly, this does not constitute representation or contract terms. We recommend that you verify all key details yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, stružna dolžina: 1.609 mm, izvrtina vretena: 110 mm, potovalna razdalja osi X: 335 mm, pomik po osi Z: 1.609 mm, moč vretenovega motorja: 26.000 W, največja hitrost vrtenja: 2.100 obr/min, skupna višina: 2.100 mm, skupna dolžina: 3.800 mm, skupna širina: 2.100 mm, CNC Lathe with C Axis VIPER - VT-33LMBC MACH-ID 9473 Manufacturer: VIPER Model: VT-33LMBC Control: Fanuc 21iTB Year of manufacture: 2008 Tool holders included Driven axial tools included Driven radial tools included Chip conveyor Tool measuring arm (Tool Eye) Powered tailstock 3-jaw chuck 400 mm with additional jaws Max. turning diameter: 780 mm X-axis travel: 335 mm Z-axis travel: 1,609 mm Spindle bore: 110 mm Spindle speed: 2,100 rpm Spindle power: 26 kW Tool turret: 12 stations Driven tool speed: 4,000 rpm Driven tool power: 4.5 kW Nsdpfx Asyw Ii Uoh Ujwg Chip conveyor: yes Tool Eye: yes Quill taper: 5MT Quill stroke: 110 mm Quill diameter: 100 mm Length: 3,800 mm Width: 2,100 mm Height: 2,100 mm Weight: 8,200 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, it does not constitute representation or contractual terms. We recommend verifying all critical details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, CNC stružnica z Y-osjo MAZAK - QTN 250 MY MACH-ID 9483 Proizvajalec: MAZAK Tip: QTN 250 MY Krmilje: Mazatrol Matrix Nexus Leto izdelave: 2011 Nedpfjyyxzmex Ah Ujwg Prosimo, upoštevajte: Podatki na tej strani so zbrani po naših najboljših močeh in po možnosti tudi od proizvajalca. Informacije so podane v dobri veri, vendar njihova natančnost ni zagotovljena. Zato ne predstavljajo nobene zastopanja ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podatke.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, CNC stružnica z osjo C MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Proizvajalec: MAZAK Tip: QUICKTURN NEXUS 250-IIM Krmiljenje: Mazatrol Matrix Nexus Letnik: 2008 Prosimo, upoštevajte: Informacije na tej strani so bile pridobljene po našem najboljšem znanju in, kjer je bilo mogoče, od proizvajalca. Podatki so posredovani v dobri veri, vendar točnost ni zagotovljena. Ne predstavljajo jamstva ali pogodbenih pogojev. Priporočamo, da preverite vse ključne informacije. Nsdpfoyz Stlex Ah Uswg

Stanje: rabljeno, Leto izdelave: 2009, Technical Details: Turning diameter: 1000 mm Swing diameter: 1000 mm 1. Technical Data Machine type: Vertical Turning Lathe (VTL) Manufacturer: Hessapp Model: DV 62 Serial No.: 14.2308 Spindle Working Range Maximum diameter: 1000 mm Maximum swing diameter: 1000 mm Cross Slide Travels Vertical slide stroke: 900 mm Horizontal slide stroke: 1810 mm Total travel: 2315 mm Spindle Nwjdot Rmdzopfx Ah Usg Spindle nose with centering cone per DIN 55021 A15 Spindle diameter at front bearing: 203 mm Main Drive Via controlled asynchronous motor and gear drive with range selector. Spindle Speeds Speed range I: 5 - 350 rpm Speed range II: 30 - 1000 rpm Traverse Speed X/Z-Axis: 10 m/min W1-Axis: 8 rpm No C-axis

Stanje: novo, Leto izdelave: 2025, Ref. No.: 10461 Manufacturer: IGREK Type: DT 4000 Year of manufacture: 2025 Control type: CNC control Control system: SIEMENS SINUMERIK 840D SL Location: Istanbul Country of origin: Türkiye Spindle speeds: 4,000 rpm Turning height: 2,000 mm Table diameter: 4,000 mm Spindle power: 37 kW Max. table load: 40 t Table rotation speed (turning): 60 rpm Max. turning diameter: 5,000 mm Max. turning height above faceplate: 2,000 mm Max. spindle torque: 1,200 Nm Spindle taper: ISO 50 Machine length: 7,500 mm Machine width: 12,000 mm Machine height: 9,500 mm Nwodpfx Ahexmd Suj Ueg Approx. machine weight: 125 t Additional information: RAM slide stroke: 2,100 mm RAM cross-section: 350 x 350 mm Vertical travel of movable cross rail: 2,000 mm Table drive system: Segmented direct drive motors Table torque: 8,200 Nm – 14,400 Nm max. Table guidance system: Hydrostatic bearings and guides IGREK DT 4000 – Your Solution for Precision Heavy-Duty Machining The IGREK DT 4000 is a state-of-the-art CNC vertical turning lathe designed specifically for precision machining of large components. Equipped with a 4,000 mm hydrostatic rotary table and a movable cross rail, it enables efficient machining of workpieces with a maximum turning diameter of 5,000 mm and a turning height of up to 2,000 mm. Key Features: Hydrostatic Rotary Table: The 4,000 mm hydrostatic rotary table ensures maximum precision and smooth operation when machining heavy workpieces. Movable Cross Rail: The vertically adjustable cross rail with a 2,000 mm stroke offers flexibility and enables adaptation to different workpiece heights. Powerful Spindle: With a spindle speed of up to 4,000 rpm and a power output of 37 kW, the machine is designed for demanding metal-cutting applications. High Load Capacity: The rotary table accommodates workpieces weighing up to 40 tons, making it ideal for large and heavy components. Multifunctional Machining: Thanks to the live spindle and precise C-axis positioning, milling and drilling operations are possible in addition to turning, increasing the machine’s versatility. The IGREK DT 4000 combines advanced technology with high performance and flexibility to meet the requirements of modern manufacturing processes. With its robust construction and wide range of machining capabilities, it is the ideal solution for the precise machining of large components in various industries.

Stanje: rabljeno, Leto izdelave: 2008, premer struženja: 275 mm, izvrtina vretena: 80 mm, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 1.345 mm, skupna višina: 2.232 mm, skupna dolžina: 4.339 mm, skupna širina: 2.232 mm, skupna masa: 7.600 kg, Oprema: dokumentacija / priročnik, Mori Seiki NL 2500 SY / 1250 CNC stružnica z Y-osjo, gnanimi orodji in drugo glavno vreteno CNC krmilje MSX-850-III (Mitsubishi 720 BM) Premer struženja 275 / 366 mm Nwjdsy Nyzgopfx Ah Usg Premer izvrtine vretena 80 mm Hitrost vrtenja vretena 4000 min⁻¹ Glavni vretenski motor 18,5/15 kW Pomik X-osi 260 mm Pomik Y-osi +50 / -50 mm Pomik Z-osi: 1345 mm Pomik W-osi (protiprimež od glavnega vretena) 1275 mm Min. indeksiranje C-osi glavnega vretena 0,001° Število orodij v revolverju 12x Število gnanih orodij 12x Orodni konus BMT Podajalnik palic LNS Quick Load Servo III Vreteno gnana orodja 6000 min⁻¹ Za vsa vprašanja o stroju ali za dogovor o ogledu nas prosimo kontaktirajte po telefonu ali elektronski pošti. Vabimo vas, da si ogledate tudi naše druge oglase in pridobite celovit pregled nad našo zalogo.

Leto izdelave: 1999, stanje: dober (rabljeno), Naprodaj: rabljeni stroj Seal-Jet IP4500, proizvajalca Economos. Leto izdelave: 1999 Maksimalni zunanji premer obdelave: 3000 mm Krmilni sistem Siemens 810T Računalnik s priloženo programsko opremo Rabljena odsesovalna in rezalna enota Vključena orodja in čeljusti za vpenjalno glavo Njdjy Smgbjpfx Ah Uswg Stroj je starejši model, vendar deluje zelo dobro in je primeren za industrijske obdelovalne dejavnosti.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Description Control: Fanuc 21i-T Maximum swing diameter: 260 mm Maximum chuck diameter: 250 mm Motor spindle speed: 4,500 rpm Clamping cylinder: Fully clamping cylinder Tool turret: 12-station disc turret, without live tooling Tool holder: VDI 40 Workpiece feeding: Workpiece circulation belt with drag frame. Nedstq Tnuepfx Ah Uewg Chip conveyor: Hinged belt conveyor.

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, We are offering 4 units of Emag VL 3 for sale. Three machines are equipped with Lifetool. One machine is without Lifetool. Year of manufacture: 2000–2001 General Description: Manufacturer: Emag Machine type: VL3 Technical data: Control: Fanuc 21i-T and Fanuc 18i-T Swing diameter: approx. 210 mm Maximum speed: 6,500 rpm Turret: VDI 40 mm, 12 stations Hinged belt chip conveyor Nwsdpfx Ahjtrdlae Usg Spindle mount: Size 5 Circulating parts conveyor Machine weight: approx. 5.5 t Each machine comes with a used 3-jaw chuck. This description is non-binding and should be verified by inspection.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, leto zadnje generalne obnove: 2023, ATTENTION: THIS MACHINE AT A ONE-TIME SPECIAL PRICE. General Description: Year of manufacture: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control system: Fanuc 21i-T Swing diameter: approx. 210 mm Maximum speed: 6,500 rpm Turret: VDI 40 mm, 12 stations The machine does not have any live tooling. Hinged belt chip conveyor Spindle mount: Size 5 Conveyor belt for finished parts Machine weight: approx. 5.5 t The following work was carried out as part of the machine’s overhaul in 2023: -The machine was completely disassembled, cleaned, and repainted -The main spindle was newly mounted -The guides and guide shoes on X and Z axes were replaced -The ball screw spindle on the X and Z axes was replaced -New unit for central lubrication with new hoses Nsdpfjtpu Szjx Ah Ujwg -The hydraulic unit was checked and serviced. The drive coupling between motor and pump was replaced -The cooling unit was checked and serviced: Temperature differential controller was replaced -The clamping cylinder was re-bedded and re-sealed -The gearbox on the A-axis was newly mounted, and the coupling between motor and gearbox was replaced -Electrical cabinet was cleaned -Operator panel was replaced -New monitor -New internal lighting -Turret was disassembled, wear parts checked, cleaned, and re-sealed -Turret encoder and encoder wheel cleaned -Linear measuring systems in X and Z axes disassembled and cleaned -Springs at the pick-up station replaced -Motors for X and Z axes checked for bearing damage -Windows on work door replaced -Chip conveyor completely disassembled, newly mounted, cleaned, and repainted -Of course, various small parts were also replaced on the machine The product has been described by us with the utmost care. The description is non-binding and should be verified during inspection.