Mrežaste Rešetke Za Paletne Regale 1M-1,2M nakup rabljenega (84.428)

Leto izdelave: 2025, stanje: novo, Net bag packaging machine. Suitable for PE net bags in pillow or gusseted form for fresh vegetables and fruits, such as: potatoes, onions, apples, cabbage, peas, carrots, peaches, lemons, grapefruits, kiwis, etc. Complete stainless steel version, PLC control with touchscreen. Print mark sensor. Suitable films: PE net, net-laminated film, etc. Bag types: flat bags, stand-up pouches with/without carry handle. - Specifications: max. film width: 1200mm; bag length: 100-800mm; bag width: 290-590mm; max. machine cycle rate (idle): 12 cycles/minute; compressed air: 0.80m³/6 bar; power supply: 220V, 6kW. Bwedpfxev Nm A Es Afron The machine/system is also available in further configurations for various packaging sizes and packaging speeds. Please note that our new price is often lower than the typical used price. Feel free to contact us and tell us about your packaging task. - Typically, 30-50 different new machines are available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from approx. 3 weeks. - All machines are available with full warranty.

Leto izdelave: 2025, stanje: novo, Net bag packaging machine. Suitable for PE net bags in pillow or gusseted form for fresh vegetables and fruit, such as potatoes, onions, apples, cabbage, peas, carrots, peaches, lemons, grapefruits, kiwis, etc. Complete stainless steel version, PLC control with touchscreen. Print mark sensor. Suitable films: PE net, net/film composite, etc. Bag types: flat bags, stand-up pouches with or without carrying handle. - Specifications: max. film width: 800mm; bag length: 100-480mm; bag width: 160-390mm; max. machine cycle rate (idle): 15 cycles/minute; compressed air: 0.40m³/6 bar; power: 220V, 4kW. The machine/system is also available in various models for different packaging sizes and speeds. Bodjv Nm Arspfx Afrjwn Please note that our new prices are often below usual used equipment prices. Feel free to inquire and tell us about your packaging requirements. – We usually have 30-50 different new machines in stock for immediate delivery. For customer-specific machines, we offer very short lead times starting from about 3 weeks. – All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Net bag packaging machine. Suitable for PE net bags in pillow or gusseted form, for fresh vegetables and fruit such as potatoes, onions, apples, cabbage, peas, carrots, peaches, lemons, grapefruits, kiwis, etc. Fully stainless steel construction, PLC control with touchscreen. Print mark sensor. Suitable films: PE net, mesh/film composites, etc. Bag types: flat bags, stand-up pouches with/without carrying handle. – Specifications: max. film width: 1000mm; bag length: 100–600mm; bag width: 240–490mm; max. machine cycle speed (unloaded): 14 cycles/minute; compressed air: 0.60m³/6bar; power: 220V, 5kW. The machine/plant is also available in further versions for various packaging sizes and speeds. Bwsdpfx Aov Nm Axofren Please note that our new equipment prices are often below typical used equipment prices. Feel free to inquire and let us know your packaging requirements. – We usually have 30–50 different new machines available for immediate delivery from stock. For custom-built machines, we offer very short delivery times, starting from approx. 3 weeks. – All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Automatic clip-closing machine for packaging fruit, vegetables, and industrial products in net bags sealed at both ends with a metallic clip. Suitable as a feed system for: AMTEC VERTIwrap automatic dosing machine for packaging fruit, vegetables, etc. — A label or identification tag is attached to at least one end. — Features automatic tube changeover (holds up to 200m of net material), controlled by a motor. Net feeding is managed via a glide system with two drives: a slow drive for packaging and a fast drive to retrieve the remaining net and return it to the starting position. Ensures highly uniform package sizes for very flexible net tubes with a diameter of 200 mm. Suitable for packages from 0.5 to 5.0 kg. Simple operation via control panel. — Specifications: max. machine cycle rate (idle): 35 cycles/minute; power: 380V, 2.9kW; compressed air: 1.5m³/min, 6 bar; machine dimensions: L1840xW720xH2010mm; weight: 425kg. Bwjdjv Nm Dcopfx Afrjn Please note that our new prices are often below the typical prices for used equipment. Feel free to send an inquiry and tell us your packaging requirements. — We typically have 30–50 different new machines available immediately from stock. For machines made to customer specifications, we offer very short delivery times starting from approx. 3 weeks. — All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.100 mm, skupna širina: 245 mm, skupna višina: 40 mm, nosilnost na odsek shranjevanja: 1.000 kg, Police iz pocinkane pločevine za nivoje pobiranja, uporabljene pri kovinskih skladiščnih regalih. Model na fotografijah ima dimenzije 1100x245 mm (DxŠ), debelina pločevine je 1 mm in za nivo z uporabno dolžino 2700 mm je potrebnih 11 kosov! Proizvajamo police za skladiščne regale iz pocinkane ali elektrostatiko barvane pločevine, v kateri koli velikosti in dimenziji po vašem projektu! Za dodatne informacije in personalizirane cenovne ponudbe nas kontaktirajte! Bjdpfxow S Tlpj Afrown

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, 1 hydraulic nailing machine with cross and longitudinal board loader. 1 corner cutter + 2 markers Bwodpfxjtp T Nwe Afron 1 pallet turner 1 alternative pallet turner 1 forklift 1 outfeed transfer

Leto izdelave: 2023, stanje: pripravljen za uporabo (rabljen), WHEEL SAWING MACHINE FOR PALLET BLOCKS. MACHINE OPERATES OCCASIONALLY. MINIMUM 50x50 mm MAXIMUM 150x150 mm Bwedpfok Nf S Rex Afren

Stanje: rabljeno, prevoženi kilometri: 105.161 km, moč: 78 kW (106,05 KM), prva registracija: 08/2013, vrsta goriva: dizel, lastna masa: 2.418 kg, največja dovoljena obremenitev: 1.082 kg, skupna masa: 3.500 kg, konfiguracija osi: 4x2, medosna razdalja: 3.450 mm, naslednji pregled (TÜV): 10/2025, gorivo: dizel, poraba goriva (mestna vožnja): 9 l/100 km, poraba goriva (izven mesta): 7,3 l/100 km, poraba goriva (kombinirana): 7,9 l/100 km, barva: rumena, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: drugo, število sedežev: 2, skupna dolžina: 6.238 mm, dolžina tovornega prostora: 3.500 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 2.100 mm, Leto izdelave: 2013, gradbena višina: 2.770 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, računalnik na krovu, sistem za imobilizacijo, The used Iveco Daily 35 S11 C30C short wheelbase version is a reliable choice for your transportation needs. It was first registered on 26/08/2013, with a valid roadworthy inspection until October 2025. The van has a mileage of 105,161 km and is equipped with a 2,287 cc diesel engine delivering 78 kW (106 hp). The automatic transmission ensures a comfortable driving experience. This vehicle meets Euro 5 emissions standards and displays a green environmental badge. Combined fuel consumption is 7.9 l/100 km. The spacious yellow body offers ample cargo space with a height of 2,770 mm, width of 2,177 mm, length of 6,238 mm, and a wheelbase of 3,450 mm. The permissible gross weight is 3,500 kg. Bsdpfew S Nxlsx Afrjwn The van is fitted with a camera system, shelving, and a bulkhead pass-through. The Iveco Daily is ideally suited for commercial users and offers various loading options, as well as optional registration services and delivery. Viewings are possible without prior appointment, allowing prospective buyers to thoroughly inspect all vehicle details. Sale exclusively to commercial operators (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Stanje: rabljeno, prevoženi kilometri: 90.829 km, moč: 78 kW (106,05 KM), prva registracija: 08/2013, vrsta goriva: dizel, lastna masa: 2.550 kg, največja dovoljena obremenitev: 950 kg, skupna masa: 3.500 kg, konfiguracija osi: 4x2, medosna razdalja: 3.750 mm, gorivo: dizel, poraba goriva (mestna vožnja): 9 l/100 km, poraba goriva (izven mesta): 7,3 l/100 km, poraba goriva (kombinirana): 7,9 l/100 km, barva: rumena, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: drugo, število sedežev: 2, skupna dolžina: 6.840 mm, dolžina tovornega prostora: 3.500 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 2.100 mm, Leto izdelave: 2013, gradbena višina: 2.850 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, računalnik na krovu, sistem za imobilizacijo, The Iveco Daily 35 S11 C30C is a versatile commercial vehicle that combines performance, comfort, and safety in a convincing all-round package. Equipped with a powerful diesel engine with a displacement of 2,287 cm³, it always delivers the necessary power for demanding transport tasks, while the automatic transmission ensures a relaxed, precise, and comfortable driving experience—even during frequent stop-and-go situations or tight maneuvering. With a mileage of 90,829 km and first registration in August 2012, this vehicle presents itself in well-maintained, immediately operable condition. The integrated shelving system organizes the cargo area optimally, ensuring that tools, materials, and spare parts are always within reach and allowing workflows to be made significantly more efficient. The air suspension considerably increases driving comfort and protects both the driver and the cargo, while the rear-view camera provides maximum safety during reversing and maneuvering. Thanks to the existing COC document, straightforward registration is guaranteed, enabling the vehicle to be put into professional use immediately. The Iveco Daily 35 S11 C30C combines robust engineering, thoughtful features, and practical functions into a reliable partner for trades, commerce, or logistics, making everyday work easier and noticeably boosting efficiency. Bwedpfx Ajyukwbefrsn Sale exclusively to commercial customers (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Leto izdelave: 1976, stanje: pripravljen za uporabo (rabljen), I am selling a tenoning machine for parallel grooving, such as grooves for pallet slats, etc. Bwedpfjh Hp U Sjx Afren WACO T2-SL Year of manufacture: 1984. Groove width: 30 mm. Motor: 3.3 kW Made in Germany. Available immediately. Comes with documentation.

Stanje: novo, Bumper, corner guard, rack leg protector for warehouse shelving. The Mega-M warehouse rack leg bumper is made of steel, powder-coated in yellow. It features 4 holes for permanent floor installation and side holes for bolting cross beams or horizontal rails. The bumper increases safety for forklift operations within the warehouse, reducing the risk of costly rack repairs. - Manufactured from steel, powder-coated in yellow. - Universal and easy to install. - Mounted to the front of the rack upright. - Allows for mounting horizontal beams. - Used in industrial environments to protect racks from mechanical damage. - Enhances safety and lowers warehouse maintenance costs. This listing is for a rack leg bumper: Item code: MTP001334 • Height: 400 mm • Width: 170 mm • Length: 300 mm • Steel thickness: 4 mm • Mounting hole diameter: 15 mm Bedom Sg Dhopfx Afrown • Colour: yellow RAL1023 • Quantity per pallet: 108 pcs Net price: 11 EUR per unit. We offer a wide range of racking components, both new and used: uprights, beams, and shelf infills such as cross beams, WEMA grids, wire shelves, and chipboard panels. The listed prices apply to wholesale exports outside of Poland. Please contact us for details. For wholesale and retail prices within Poland, please contact us. * The above price applies with a minimum order of one pallet. * EU-wide delivery available. * The offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles Bedjh R Taqopfx Afrjwn - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing Bwsdpfx Afjmhhy Neren - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, nosilnost: 250 kg, Oprema: žerjav, GEDA INCLINED CONSTRUCTION HOIST COMFORT 250 12M NEW TYPE: GEDA COMFORT, NEW, 2026 model year. Manufacturer: GEDA, Germany Drive: 1.3 kW/230 V/50 Hz Load capacity: max 250 kg Lifting speed: 30 m/min The equipment for a lifting height up to 12 m includes: - Electric motor - End section with pulley - Standard trolley with safety brake - Base rail 2.0 m - Extension 250/2 m x 4 pcs - Extension 250/1 m - Adjustable corner section (20° to 45°) - Universal basket (82 x 35 x 70 cm) +++++ ++ THE GEDA INCLINED HOIST IS ALSO AVAILABLE WITH 200 KG CAPACITY – ‘STANDARD’ MODEL ++ +++++ Bsdpfsxvyagjx Afrswn +++++ REQUEST AN EVEN BETTER OFFER FOR THE GEDA STANDARD 200 +++++ +++++ GEDA IS IDEAL FOR LIFTING SOLAR PANELS +++++ +++ FOR A LIFTING HEIGHT UP TO 14M, ADD ONE MORE 2.0M RAIL ++++ ++++ SPECIAL PROMOTIONAL PRICE FOR 14M: PRICE ON REQUEST +++++ +++ YOU CAN ALSO PURCHASE 10M, 16M, 18M, 20M, ETC. ++++ +++++ +++++ HIGHER GEDA HOIST HEIGHT THAN 21M: +++++ ++++ WITH A 43M CABLE, YOU CAN ASSEMBLE GEDA UP TO MAX. 21M LIFTING HEIGHT +++ +++ JUST PURCHASE ADDITIONAL 2-METER RAILS +++ +++ YOU CAN CHOOSE DIFFERENT LIFTING HEIGHTS—10M, 12M, 16M, 18M, 20M, 22M, 24M, 26M, 28M, ETC. ++++ +++++ THE SHOWN PRICE IS FOR 12M +++++ +++ DEPENDING ON HOW MANY 2-METER RAILS YOU BUY +++ +++ IF YOU NEED A GREATER HEIGHT THAN 21M – WE INSTALL ++ +++++ YOU GET ++FREE++ A LONGER 63M CABLE+++++ +++++ +++++ FROM PROFESSIONALS FOR PROFESSIONALS +++++ INSTALLATION POSSIBLE ON TERRACES, BALCONIES, FLAT ROOFS, OR WINDOWS, AS WELL AS ON SCAFFOLDING AS A VERTICAL HOIST ++ FOR LIFTING MATERIALS FOR FACADE WORKS ++ +++++ WITH THE GEDA VARIO CONVERSION +++++ +++++ (LEVELING THE BASKET TO HORIZONTAL POSITION) +++++ +++++ YOU GET A VERTICAL HOIST +++++ +++++ THUS, YOU GET 2 HOISTS IN 1 +++++ CERTIFICATE for inclined construction hoist from an authorized company for testing and inspection. +++++ +++ ORIGINAL GEDA INSTALLATION AND OPERATION MANUAL IN CROATIAN +++ +++++ +++ SPECIAL OFFER PRICE GEDA 250 ONLY ++4,900 +++++ +++ SPECIAL OFFER PRICE GEDA 200 ONLY ++4,200 +++++ +++++ 12-MONTH WARRANTY! +++++ +++++ +++++ ALWAYS IN STOCK, READY FOR DELIVERY – MULTIPLE UNITS OF GEDA HOISTS AVAILABLE +++++ +++++ STANDARD 200KG AND COMFORT 250KG +++++ +++++ FOR ANY ADDITIONAL QUESTIONS, OUR TEAM IS AT YOUR SERVICE +++++ IT'S BEST TO CALL US AND FIND OUT WHICH GEDA INCLINED HOIST IS BEST FOR YOUR NEEDS +++++ ++++ WE ARE THE MAIN AUTHORIZED DEALER AND +++++ SERVICE CENTER FOR GEDA ORIGINAL CONSTRUCTION HOISTS IN THE REPUBLIC OF CROATIA FOR OVER 30 YEARS +++++

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, The machine can fill still beverages such as water, juice, and wine, and it is also capable of filling carbonated drinks. The machine is isobaric. Bwedpfx Afsvtgaxorjn

Stanje: skoraj kot novo (rabljeno), Jeklene konstrukcije - 2,50 PLN na kg Bjdpfx Afsy H Eu Tsrewn

Stanje: rabljeno, prevoženi kilometri: 20 km, moč: 125 kW (169,95 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, skupna masa: 3.170 kg, prva registracija: 05/2026, barva: siv, število sedežev: 8, skupna dolžina: 5.050 mm, skupna širina: 2.032 mm, skupna višina: 1.997 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Errors and prior sale excepted! Internal Number: 70033 ---- LOCATION: 04758 Oschatz, Filderstädter Straße 10 Tel. for enquiries: Mr. Enrico Schieler: 03435 ? 90 90 22 or ---- SPECIAL EQUIPMENT: * Tow bar, electrically swivelling * Windows, 2nd row: Pop-out windows in the side panels * Battery: H7 AGM dual battery * Fuel tank 70 l * Paint finish: Metallic * Heated steering wheel * Adaptive Matrix LED headlights – LED low beam incl. all-weather light – glare-free LED high beam – LED daytime running lights incl. integrated front LED indicators – static LED cornering light – speed-dependent headlight range control – LED rear lights * Technology Package 6: Exterior mirrors with indicators, electrically adjustable, heated and foldable – Audio system, 13-inch multifunction display, Ford SYNC 4 incl. navigation. Blind Spot Assist incl. CTA Reverse Emergency Braking Assist. Pre-Collision Assist with camera and radar, driver drowsiness alert, lane keeping, lane change assist, lane centring pilot, traffic sign recognition, wrong-way warning, parking pilot front and rear * Surround (360-degree) camera * Sensico leather-look steering wheel * B&O Sound System with 15 speakers and up to 1000 watts * Auxiliary heater (fuel water heater) with remote control incl. H7 AGM dual battery * 4 load securing eyes STANDARD EQUIPMENT: * 2 grab handles on driver and passenger sides * 2-stage unlocking for passenger and cargo area prevents locking of open doors * 3 USB ports for the 2nd row of seats * ABS * Front storage compartment * Front passenger airbag with deactivation function * Driver airbag Bwedpfxeyrzkgj Afrjn * Mirror housings painted black * Third brake light * Flat roof * Roof console * Roof rails, silver * Thatcham-approved anti-theft alarm system * Diesel particulate filter * Tachometer * Electric front windows * Electronic parking brake * Ford Key Free System – incl. Ford Power start function (keyless entry/locking and starting) * FordPass Connect – 5G WiFi hotspot – Information about the current status or location of the vehicle as well as control of selected vehicle functions via smartphone with the FordPass App – Real-time traffic information (when combined with navigation system) – WiFi hotspot (up to 5G/LTE, for up to 10 mobile devices). For more information on FordPass Connect, see * Heated windscreen * Floor mats: front carpet mats * Transmission: 8-speed automatic * Lockable glovebox * Heated rear window * Rear wiper * Rear hinged doors * Passenger compartment lighting * Front interior lighting * 3-zone automatic climate control – with automatic temperature control for driver and front passenger as well as the rear, separately adjustable – with auxiliary heating – using R-1234yf refrigerant – electric booster heater – electric temperature control in the rear * Wireless charging station in the centre console for mobile devices * Large centre console * Emergency call assistant * Rear seat package 19: 6 rear seats, includes: – 2nd row, 3 individual seats, centre seat with folding table on backrest – 3rd row with 3 individual seats * Picnic light * Tyre repair kit * Tyre pressure monitoring system * Wheels: LM 6.5 J x 17 in Active design * Gear lever on the steering column * Wipers with rain sensor * Sliding door with pull-in assist * Sliding door, right and left incl. sun blinds in the 2nd row * Rail-based

Stanje: dober (rabljeno), The machine was used for washing fruit and olives and is in good condition. Bodpfxsvtf T Do Afrown

Stanje: dober (rabljeno), Leto izdelave: 1996, Used capper, previously part of a bottling line for carbonated drinks and water. Fully functional and in good condition. Bwsdjvtpt Ispfx Afrsn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Machine used in a fish processing plant, previously used for washing squid. In very good condition, like new. Bwedpfx Afsv T Rllerjn

Stanje: dober (rabljeno), Händi P3 sestavljen iz 78 pocinkanih stebrov (480 cm x 105 cm) in 253 sivih prečk (270 cm x 10 cm). Od tega je 11 stebrov rahlo poškodovanih. Robering SLP SL sestavljen iz 53 stebrov (400 in 450 cm x 110 cm) in 266 oranžnih prečk (270 cm x 11 cm). Bwedpfxsywd Rne Afrsn Prodaja možna le kot celoten paket.

Stanje: rabljeno, Leto izdelave: 2020, obratovalne ure: 12.057 h, Liebherr LH 50 M Umschlagbagger, Baujahr: 2020, Betriebsstunden: 12.057h, inklusive Holzzange, Planierschild vorne und hinten, Heizung, Klimaanlage, Allradlenkung, Lenkrad- und Joysticklenkung, Zentralschmierung für Ober- und Unterwagen, Motor: Liebherr [170kW/230PS], Gewicht: ca. 40.300kg, guter Zustand, sofort einsatzbereit. Bwsdpfx Asyfrpyjfren Auf Wunsch unterbreiten wir Ihnen gerne ein Leasing- oder Finanzierungsangebot. Herr Mihm (Tel.) betreut Sie gerne. Weitere Informationen finden Sie auf unserer Homepage. Irrtümer und Zwischenverkauf vorbehalten! = Weitere Informationen = Antrieb: Rad Für weitere Auskünfte wenden Sie sich bitte an Tobias Ebert.

Stanje: rabljeno, lastna masa: 2.280 kg, največja dovoljena obremenitev: 11.220 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 12/2005, skupna dolžina: 2.550 mm, skupna širina: 1.130 mm, vzmetenje: jeklo, velikost pnevmatike: 285/70R19.5, barva: črn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, steel body, 2 axles, SAF axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes Body: for 1 roll-off container, 2x SAF axles, drum brakes! Bwsdpfx Afjtq Tr Rsrsn Loading height approx. 940 mm! New and used roll-off containers available at extra cost. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Stanje: rabljeno, Hydraulic motor, oil motor, hydraulic pump - Hydraulic motor suitable for: driving work platforms from GSL (German Standard Lift) - Wheel hub mounting recess: Ø 160 mm - Universal application - Quantity: 2 motors available - Price: per unit - Dimensions: 190/190/H342 mm Bwedpfxjcttyuo Afrjn - Weight: 70 kg/unit

Stanje: rabljeno, skupna višina: 1.600 mm, skupna dolžina: 1.500 mm, skupna širina: 800 mm, skupna masa: 440 kg, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Bsdpfjy Uwq Ajx Afrown TEHNIČNI PODATKI Obrezovalna enota: da Vodila za podporo plošč: da Število enot za obdelavo robov: 1 Obdelovalna enota: grobo obrezovanje zgoraj in spodaj Število zaključnih motorjev: 1 PODROBNOSTI O STROJU Model: UF 362 / 2713 Tip: Ročni brusilni stroj OPREMA Obrezovalna enota Vodila za podporo plošč