Morbidelli P 200 nakup rabljenega (52.830)

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 200-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The blasting unit is also equipped with a permanently mounted water separator, which removes moisture from the compressed air and prevents the blasting medium from clumping due to excessive moisture. For safe operation of the sandblasting equipment, our safety shutoff is included. This starts and stops the blasting process by actuating the hand lever, which is mounted on the blasting hose. The scope of delivery includes: - SAPI pressure blasting unit "Mammut 200 L" - 1 1/4" pressure regulator, permanently installed - 1 1/4" water separator, permanently installed - SAPI safety shutoff Technical data pressure blasting unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-certified with certificate - Fixed piping 1 1/4" inside and outside - Rubber-coated metal cone with rubber seal - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 200 l - Total height: 1,420 mm - Vessel diameter: 600 mm - Overall diameter: 1,000 mm - Weight: approx. 140 kg Itjdpewc Rk Esfx Abxoh ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shutoff - Fastest switching times while complying with trade association regulations (VBG 48) - Pressure settings can be precisely adjusted before blasting – continuously adjustable from 0.1 – 12.0 bar - Reduced blasting media consumption, as the pressure vessel remains constantly pressurized with no unnecessary run-on - Upon restarting, full blasting pressure is instantly available at the nozzle – no pressure build-up required → lower consumption & less hose wear - No condensate forms in the vessel, as it remains pressurized at all times → no venting or aeration at each start/stop - Optimal media dosing with hardened fine-dosing valve - Lower compressed air requirement → noticeably reduced diesel consumption - Single-person operation possible, as the pressure can be read and adjusted directly at the manometer – even without starting - No failure-prone components such as control valves, membranes, or seals → maintenance-friendly and reliable in operation - Only the blasting hose in the safety shutoff needs to be checked and replaced if necessary

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, - Proizvajalec: MEZ Frenštát p. Radh. - Tip: F200 - Moč motorja: 30 kW - Enogredna izvedba - Maks. višina razrezanega materiala: 120 mm Itjdpfx Absxa Evzjxoh - Min. dolžina razrezanega materiala: 2 m

Stanje: rabljeno, Leto izdelave: 2008, PC-based numerical control with XILOG PLUS software Mobile pendant with command functions The working area on the X-axis is 4400 mm Working area on the Y-axis: 1360 mm Working area on the Z-axis: 180 mm Travel path of Z-axis: 200 mm No. 2 working supports in X No. 8 manually adjustable panel support rails with positioning LEDs No. 3 suction cups for panel hold-down per rail Ijdpfxopvai Dj Abxsth No. 4 pneumatic Bakelite bars for lifting the panel (facilitates loading and unloading) No. 1 vertical electrospindle with vector axis and automatic tool changer, HSK 63 taper Automatic tool changer with 12 positions on the machining head Drilling head assembled as follows: No. 8 vertical X-axis spindles No. 5 vertical Y-axis spindles No. 4 horizontal X-axis spindles No. 2 horizontal Y-axis spindles Safety system with bumper system on operator head No. 1 vacuum pump, 100 m3/h Automatic lubrication

Stanje: rabljeno, Leto izdelave: 2016, General technical data: Panel width min. 250 mm, max. 3000 mm; panel depth min. 100 mm, max. 900 mm; panel thickness min. 12 mm, max. 60 mm. Max. panel weight: 50 kg. Working height: 1060 mm. Linear conveying speed of the panel conveyor with frequency inverter: 20–95 m/min. For panel weights over 50 kg, speed may not exceed 50 m/min. Line production capacity: up to 25 units/minute. MORBIDELLI POWERFLEX Flexible Boring Machine: 5 split lower vertical drilling heads, 3 automatic, flexible, split upper vertical drilling heads with NC control, each with 26 independent spindles, 2 horizontal drilling heads with split heads and 28 + 28 spindles (per side), each independent (arranged on two levels), Code: MMA004.03. Iedpfow Dba Hox Abxsth TECHNICAL DATA TO BE VERIFIED.

Stanje: rabljeno, Leto izdelave: 2016, General technical data: Panel width min. 250 mm, max. 3000 mm; panel depth min. 100 mm, max. 900 mm; panel thickness min. 12 mm, max. 60 mm. Max. weight per panel: 50 kg. Working height: 1060 mm. Linear speed of the panel conveyor with frequency inverter: 20–95 m/min. For panel weights over 50 kg, the speed may not exceed 50 m/min. Line production capacity: up to 25 pieces per minute. Itjdpfx Aow Dbbqjbxoh MORBIDELLI POWERFLEX Flexible Drilling Machine: 5 divided lower vertical drilling heads; 3 automatic, flexible, divided upper vertical drilling heads with NC control, each with 26 independent spindles; 2 horizontal drilling heads with divided heads and 28 + 28 spindles (per side), each independent (arranged on two levels). Code: MMA004.03 TECHNICAL DATA TO BE VERIFIED.

Stanje: rabljeno, Complete, highly productive, and flexible drilling line with automatic loading and unloading system General technical data: - Panel width: min. 250 mm, max. 3000 mm - Panel depth: min. 100 mm, max. 900 mm - Panel thickness: min. 12 mm, max. 60 mm Itedev N Hifspfx Abxsh - Maximum panel weight: 50 kg - Worktop height: 1060 mm - Linear speed of the panel conveyor (frequency inverter controlled): 20 – 95 m/min - For panel weights over 50 kg, the speed must not exceed 50 m/min - Line production capacity: up to 25 pieces per minute Technical data of numerical control and line management: - Numerical control: TPA – Albatros – CNC 2000 - EASYTOOL software for creating and modifying machine tooling. Allows defining the arrangement of tools mounted on each drilling machine within a single file. Files created by Easytool are further processed by the machine line optimizer to balance workloads along the production line. Line comprises the following machines: * Double-cell automatic loader by MAHROS, model BRUSH – with motorized pre-loading rollers * Panel turner by MAHROS * Flexible drilling machine by MORBIDELLI, model POWERFLEX – No. 5 segmented lower vertical drilling heads; automatic flexible NC-controlled machines – with 26 independent spindles per head * No. 3 heads of automatic flexible segmented upper vertical drilling machine with NC control – also with 26 independent spindles per head * No. 2 horizontal drilling heads with segmented heads and 28 + 28 independent spindles each (per side; arranged on two levels) * Flexible drilling machine by MORBIDELLI, model POWERFLEX – No. 5 segmented lower vertical drilling heads; automatic flexible NC-controlled machines – with 26 independent spindles per head * No. 3 heads of automatic flexible segmented upper vertical drilling machine with NC control – with 26 independent spindles per head * No. 2 horizontal drilling heads with segmented heads and 28 + 28 independent spindles each (per side; arranged on two levels) * Automatic dowel inserting machine by MORBIDELLI * Panel turner by MAHROS * Automatic double-cell unloader by MAHROS, model BRUSH – with motorized unloading rollers and system for managing sacrificial panels

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EDGE CELOVITA LINIJA VKLJUČUJE: 1. TETRA PAK A3 COMPACT FLEX QUICK CHANGE 200/250 EDGE POLNILNIK V200, leto izdelave 2010 15.120 delovnih ur Kapaciteta 9.000 kartonov na uro 2. TETRA PAK ACHX 10-0400-44 HELIX AKUMULATOR KARTONOV V400, leto izdelave 2010, 17.431 delovnih ur 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM NADGRAJEN V300, leto izdelave 2010 4. TETRA PAK APPLICATOR CAP30 FLEX PRO23 V200, leto izdelave 2010, 10.914 delovnih ur 5. TETRA PAK FILM WRAPPER 32 V400, leto izdelave 2010, nikoli uporabljen, samo 45 ur! 6. TETRA PAK CARDBOARD PACKER CBP 32 V400, leto izdelave 2010, wrap around 7. TETRA PAK LINE CONTROLLER LC30+ 8. TRANSPORTNI SISTEM 9. VKLJUČEN TISKALNIK VIDEOJET 1620 LINIJA JE V STANJU KOT NOVA. LOKACIJA – ŠVEDSKA. TAKOJ PRIPRAVLJENA ZA DEMONTAŽO IN POŠILJKO. Iodpfxjya Nf Ie Abxoth CENA PO POVPRAŠEVANJU.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 110 kW (149,56 KM), vrsta goriva: električni, barva: drugo, skupna masa: 21.360 kg, Leto izdelave: 2026, Čeljustni drobilniki običajno drobijo 200 do 300 ton na uro, odvisno od njihove zmogljivosti. Drobilnike z večjo zmogljivostjo je mogoče izdelati po naročilu glede na potrebe strank. Čeljustni drobilniki se na splošno uporabljajo za drobljenje najtrših kamnin, kot so bazalt, granit in gabro. Zaradi svoje močne in vzdržljive čeljustne konstrukcije so že vrsto let ena izmed najbolj priljubljenih izbir v rudarski industriji. Z nastavitvijo odprtine čeljusti je mogoče zelo natančno dobiti želen frakcijski izdelek in zmogljivost. Nastavljanje je enostavno izvedljivo s pomočjo hidravličnih cilindrov. SPLOŠNE ZNAČILNOSTI IN LASTNOSTI: - Pogon preko jermenice in škripca - Čeljustne plošče iz posebej ulitega manganovega jekla z visoko odpornostjo proti obrabi - Ekscentrična gred iz kovanega jekla, legiranega s Cr, Ni in Mo - Nastavljiva odprtina čeljusti s hidravličnim reguliranjem - Varnostne vzvodne plošče (toggle plate) za zaščito ob preobremenitvi - Površine, izpostavljene obrabi, so zaščitene z oblogami TEHNIČNE SPECIFIKACIJE: • Model: FABO CLK 1175 • Tip: Primarni čeljustni drobilnik • Vhodne dimenzije: 1070 x 760 mm • Nastavljiva odprtina čeljusti: 45–160 mm • Največja vhodna velikost: 760 mm • Zmogljivost: 200–300 ton/uro • Motor: težkoindustrijski GAMAK, 110 kW • Ležaji: težkoindustrijski SKF-FAG • Teža: 21.360 kg • Dimenzije: 2730 x 1698 x 2492 mm • Vključno z motorjem in varnostnimi zaščitami. Iedpfxsy Dpl Rs Abxoth * Vsi naši izdelki so izdelani skrbno in so pokriti z 1-letno garancijo! * Montaža in šolanje operaterjev BREZPLAČNO ZA VEČ INFORMACIJ NAS PROSIMO KONTAKTIRAJTE!

Stanje: dober (rabljeno), Stebelne rezkarje, rezkarji, stebelni rezkarji za navoje, navojni rezalniki - Proizvajalec: JAL PWS P, 29 kosov stebelnih rezkarjev za navoje - Vpenjanje: Ø 27 mm 25 kosov, Ø 32 mm 4 kosi Ijdpfegfcm Rex Abxeth - Različni tipi: glej fotografije - Velikosti: glej fotografijo s seznamom kosov - Cena/prodaja: samo kot komplet - Dimenzije: 240/180/višina 150 mm - Skupna teža: 4,2 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, dolžina obdelovanca (maks.): 3.000 mm, širina obdelovanca (maks.): 1.300 mm, višina obdelovanca (maks.): 80 mm, Ponujamo zelo dobro ohranjen CNC vrtalni in rezkalni stroj Morbidelli Uniflex HP s prehodom skozi stroj, letnik 2016. Proizvajalec: Morbidelli Model: Uniflex HP Leto izdelave: 2016 Stanje: zelo dobro ID kategorije: 2074 ID tipa: 151 Tip stroja: Prehodni CNC vrtalni in rezkalni stroj Morbidelli UNIFLEX HP je visokozmogljivo CNC vrtalno in rezkalno obdelovalno središče, zasnovano za natančno obdelavo plošč pri proizvodnji pohištva in notranje opreme. Omogoča vrtanje na več straneh plošče ter rezkanje z visoko natančnostjo, pri tem pa optimizira čas priprave s pomočjo avtomatiziranega vpenjanja in CNC krmiljenja. Glavne lastnosti: • Možnost šeststranskega vrtanja s stroji za zgornje in spodnje obdelovanje • Do 134 neodvisnih vrtalnih vreten za visoko proizvodno zmogljivost • RO.AX rotoaksialna tehnologija vreten za ničelno zračnost in izjemno natančno vrtanje • Neodvisna dvojna vpenjala odpravljajo nastavitveni čas stroja in omogočajo simultano obdelavo • Možnost istočasne obdelave dveh prekrivajočih se plošč • Integrirano žagin list v X-osi za razrez plošč • Robustna varjena O-okvir konstrukcija za maksimalno togost in natančnost • CNC-vodeno premikanje plošč z brezkrtačnimi motorji in krogličnimi vreteni • CNC programska oprema Xylog Plus 2 s PC vmesnikom Vrtalni sistem: • 96 vertikalnih vrtalnih vreten (48 zgornjih + 48 spodnjih) • Horizontalna vrtalna vretena: o 8 + 8 v X smeri o 4 + 2 v Y smeri • Največja hitrost vretena: 6.000 min⁻¹ • Integrirano žagin list v X-osi: o Premer: 125 mm o Hitrost: 7.500 min⁻¹ CNC krmiljenje in programska oprema: • Industrijski PC z operacijskim sistemom Windows Itsdpoyr Uguofx Abxjh • 17” barvni zaslon in tipkovnični vmesnik • Programska oprema Xylog Plus 2 • Programiranje: Parametrično programiranje • Podpora za uvoz DXF in ASCII datotek • Simulacija in optimizacija vrtalnih ciklov Zmogljivost obdelave plošč: • Dolžina plošče: 250 – 3000 mm • Širina plošče: 70 – 1300 mm • Debelina plošče: 10 – 80 mm • Največja teža plošče: 100 kg Hitrosti osi: • X os: 120 m/min • Y os: 35 m/min • Z os: 30 m/min Zahteve stroja: • Komprimiran zrak: 6,5 bar • Povprečna poraba zraka: 500 Nl/min • Pretok za odsesavanje prahu: o Glava zgoraj: 5.000 m³/h o Glava spodaj: 2.250 m³/h Dodatna oprema vključena: • Merilna naprava za dolžino plošč • Električna omara s hlajenjem • Ročne postaje za nalaganje in razlaganje s prečnimi trakovi Za dodatna vprašanja ali več informacij nam pišite ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 4.500 h, VICTORY 200/80 Power SN:50294 Year:2006 Itedpfx Ajzcanrsbxjh Closing force (kN) 800 S10 screw, diameter 30mm Working hours: ONLY 4.500 Mounting plates enlarged vertically Mould heater with 12 control loops Version HV 2 with control pumps (pressure and flow control in a closed control loop) for parallel movement sequence Microcomputer CC100 A03 Ethernet interface for use with EMS 8x digital output, 8x digital input Interface for ejector protection Interface for temperature control units Data protocol Engel, physical type: 20MA-CL Microflow MINI-CAM Process parameter adjustment support based on an expert system 2-pole service socket, 230V 6x 3-phase socket, 10A / 16A 2x 3-phase socket, 10A / 16A, switchable 2/2-way magnetic air valve, R1/4 inch Flow regulator 0-10 l, 4 circuits Temperature control circuits can be switched off manually or automatically (centrally at the flow controller) - Switch-off function selectable. Tubing for flow controller, 4 temperature control circuits

Stanje: rabljeno, Leto izdelave: 2003, obratovalne ure: 6.500 h, VICTORY 200/60 Power SN 162699 Closing force (kN) 600 (open to 800 kN) Year of production: 2003 Screw diameter 30.00 mm L/D ratio of mass cylinder 20.50 Working hours: ONLY 6.500 Vertically enlarged clamping plates (B-plates) Swiveling reject chute for reject selection, activated upon reject detection Version variant HV 2 with control pumps (pressure and flow control in a closed control loop) for parallel movement sequence Microcomputer CC100 A03 Kistler 5155 A2213Q02 charge amplifier with automatic switching pressure detection 4x digital output, 4x digital input Ijdszcanfepfx Abxeth Interface for temperature control units or hot runner controllers Data protocol Engel, physical type 20 mA – CL Microflow MINI-CAM - Process parameter adjustment support based on an expert system 1xService socket, 2-pole, 230Vž 4x 3-phase socket, 10A / 16A 2x3-phase socket, 10A / 16A, switchable 2/2-way magnetic air valve, R1/4 inch Flow regulator 0-10 l, 8 circuits Temperature control circuits can be switched off manually or automatically (centrally at the flow controller) - Switch-off function selectable.

Stanje: rabljeno, prevoženi kilometri: 9.470 km, moč: 90 kW (122,37 KM), vrsta goriva: električni, vrsta prenosa: samodejen, skupna masa: 2.660 kg, prva registracija: 11/2024, emisijski razred: Euro 6, barva: črn, vzmetenje: jeklo, število sedežev: 7, gorivo: elektrika, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, greljenje sedeža, klimatska naprava, nadzor oprijema, navigacijski sistem, parkirni grelec, parkirni senzorji, računalnik na krovu, servovolan, sistem za imobilizacijo, spojka prikolice, tempomat, LG7 LED high-performance headlamp, E07 hill start assist, Q10 cross member for trailer hitch, FR8 reversing camera, EY5 Mercedes-Benz emergency call system, SD1 i-Size child seat attachment, EY6 breakdown management, B25 electric parking brake, EI0 wireless charging system for mobile devices, T68 child safety locks for doors and windows in passenger compartment, Z1M homologation M1, IA0 wheel arrangement 4x2, XO7 Mercedes-Benz Mobilo with DSB and GgD, R2H 40 × 6 cm (16") alloy wheels in multi-spoke design, T78 sliding door rail cover in vehicle colour, U98 individual seats in 3rd row, Y10 first aid kit, 804 AEJ X3/1, VL2 velour floor mats, SF6 height-adjustable driver’s seat with lumbar support, RD9 tyres without prescribed brand, H00 warm air duct to passenger compartment, NM5 MB-NA 60 2b with flange, low position, medium RPM, C6L multifunction steering wheel, H22 heated rear window, EM7 2 USB interfaces in rear centre console, Z5L POWER STANDARD, Y44 warning triangle, GA2 automatic transmission for electric drive, P2F active safety package, FP3 mirror package, FP4 chrome interior package, XC8 VIN visible from outside, SZ6 table and illuminated decorative elements on backrest, JH3 communication module (LTE) for digital services, X30 registration certificate part II, FQ3 lockable glovebox on passenger side, I5T plastic underbody protection, RY2 tyre pressure monitoring on front and rear axles, wireless, CK4 handle strip above license plate in vehicle colour, 054 AEJ X3/2, CK8 heated steering wheel, XU1 German language signs/documentation, IG4 standard, SK5 automatic air conditioning. We are happy to provide you with a personal financing or leasing offer and will take your used vehicle in part exchange. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age/mileage; partial resprays have been carried out as part of vehicle preparation. No liability for printing or typing errors. Subject to errors and prior sale ... more on our homepage Itjdpfx Aboy Sf Epsxeh

Stanje: novo, Saw blade tiltable 0-45° Carriage length 3,200 / 3,800 mm Cutting width 1,300 / 1,500 mm Motor power 7.5 kW Cutting height 177 mm Cutting height at 45°: 133 mm Saw blade diameter 500 mm Speed 3000/3600/4200 rpm Working height 870 mm Extraction port diameter 1x120, 1x100 mm Fimal Panel Saw P 3200-08 AX Partnership Edition ----- Manufacturer's description: - Sliding carriage made from anodized aluminum including high-precision guide rails made of hardened and ground steel - Carriage can be locked in any position - Saw blade guard with swiveling device - Outrigger table with adjustable miter fence, including length compensation at every 5° and at 22.5° - Mitre fence and eccentric clamp - Belt change for speed adjustment from above (opening in saw table) - Control lights for set saw blade speed - Electrical system and safety devices conforming to CE standards Technical data: - Saw blade tilt: 0° to 45° - Table dimensions: 1,030 x 680 mm - Working height: 870 mm - Sliding carriage dimensions: 3,200 x 400 mm - Cutting length with scoring unit: 3,420 mm - Cutting width at parallel fence: 1,300 mm - Max. cutting height with 500 mm blade: 90°: 177 mm / 45°: 133 mm - 3 speeds: 3,000 / 3,600 / 4,200 rpm - Motors: Main saw: 7.5 kW / 10 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP - Noise level according to EN 27960: 84.4 – 86.3 dB(A) - Extraction ports: 1 x 120 mm, 1 x 100 mm - Miter fence extendable to 3,400 mm ----- Equipment Partnership Edition P 3200-08 AX: - 3-axis programming unit for saw blade height adjustment, blade tilt adjustment, and parallel fence adjustment via TFT 15" touchscreen (Windows-based), including 2,500 program memory slots, 2 USB ports, and 1 Ethernet network connector - Scoring unit with electromechanical height adjustment and motorized axial pulse adjustment, including digital displays for height and width Itjdjtg Ailspfx Abxjh - Miter fence with 3 stops; 2 stops with digital display, 1 stop analog but also digitally adjustable via coupling - Upper control panel including automatic star-delta start Optional at extra charge (on request): - Cutting width 1,500 mm, sliding carriage length 3,800 mm ----- Price of the above-mentioned machine on request! ----- Prices excl. packaging and shipping Prices excl. statutory VAT ----- (Technical data as per manufacturer – no guarantee!)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 234 mm, pomik osi Y: 100 mm, pomik po osi Z: 625 mm, proizvajalec krmilnikov: MAZATROL, model krmilnika: Mazatrol SmoothG CNC, premer obdelovanca (maks.): 695 mm, This 4-axis Mazak QUICK TURN COMPACT 200 MSY L was manufactured in 2018. It features a maximum swing of 695 mm and a machining diameter of 380 mm. Equipped with a Mazatrol SmoothG CNC control, it ensures precision and efficiency. The main spindle reaches up to 5,000 rpm, while the sub-spindle achieves 6,000 rpm. A great opportunity to acquire this Mazak QUICK TURN COMPACT 200 MSY L lathe. Contact us for further details. Machine Advantages Technical Highlights Ijdsyk Tg Rspfx Abxeth 1. Capacity: - Maximum swing: 695 mm - Maximum machining diameter: 380 mm - Maximum bar capacity: 65 mm 2. Spindle: - Main spindle chuck size: 8 inches - Maximum speed of main spindle: 5,000 rpm - Sub-spindle chuck size: 6 inches - Maximum speed of sub-spindle: 6,000 rpm 3. Turret: - Number of tools: 12 - Maximum speed: 5,000 rpm 4. Axis travels: - X axis: 234 mm - Y axis: 100 mm - Z axis: 625 mm - W axis: 585 mm 5. Control system: - Mazatrol SmoothG CNC Additional Information Fully equipped version with C-axis / Y-axis / sub-spindle / long bed. Machine currently under power.

Stanje: rabljeno, prevoženi kilometri: 200.000 km, moč: 265 kW (360,30 KM), prva registracija: 09/2015, vrsta goriva: dizel, skupna masa: 26.000 kg, emisijski razred: Euro 6, Oprema: ABS, klimatska naprava, parkirni grelec, Mercedes Antos 2536 Leto proizvodnje: 04/2015 Samo 209.000 km Sandučar/cerada Klizna cerada Neutralna cerada bez reklama Međuosovinsko rastojanje: 4600 mm Ovjes: vazduh/vazduh Klima uređaj Pomoćni grejač/parking grejač Nemačko vozilo TÜV na zahtev nov Nosivost: 15,5 tona Sanduk: dužina 725 cm, visina 275 cm, širina 245 cm !!! Odgovarajuća prikolica dostupna za 6900€ !!! Posetite našu web stranicu: ----deutsch/english/srpski/hrvatski/bosanski/bugarski..... Goran deutsch/english/p?????/?????..... Roman Rado ćemo se pobrinuti za vašu finansiranje ili lizing. Prodaja za EU: neto uz dostavljanje dokumenata firme i PIB/VAT broja Depozit za PDV: 2.000 € Naša usluga za vas: - izvozne tablice - izvozni papiri i EUR1 - transport širom sveta Itjdpsy Hzh Nefx Abxsh - mogućnost prenoćišta - prevoz sa aerodroma Minhen ili stanice Pasau

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Siemens Sinumerik 840 D, 5-osno krmiljenje. Itjdpfxsza Egbo Abxoh Največji premer kolesa: 2000 mm Širina kolesa: 700 mm Teža stroja: 35.000 kg Prostorske zahteve: pribl. 6,9 x 8,4 x 3,7 m

Leto izdelave: 1997, stanje: pripravljen za uporabo (rabljen), skupna masa: 12.500 kg, stiskalna sila: 204 t, hod: 400 mm, Hidravlična 4-stebrična stiskalnica, letnik 1997. Ta stiskalnica tipa 4 SPY 200 SO proizvajalca August Luigart & Sohn GmbH & Co. KG (ALN) ima tlačno silo 2.000 kN in hod 400 mm. Ima območje vpenjanja orodja 1.460 × 890 mm in največjo maso zgornjega orodja 2.500 kg. Če iščete visoko kakovostne kapacitete za stiskanje kovin, priporočamo, da razmislite o naši naprodaj razpoložljivi stroji 'August Luigart & Sohn GmbH & Co. KG (ALN) 4 SPY 200 SO'. Za več informacij nas kontaktirajte. Itsdpozd Efdjfx Abxoh • Proizvajalec: August Luigart & Sohn GmbH & Co. KG (ALN) • Tip stroja: hidravlična 4-stebrična stiskalnica • Hidravlični tlak: 285 bar • Višina odprtine: 800 mm • Moč glavnega motorja: 32,5 kW • Napetost: 415 V • Frekvenca: 50 Hz • Območje vpenjanja orodja: 1.460 × 890 mm • Največja masa zgornjega orodja: 2.500 kg • Kapaciteta olja: pribl. 850 l

Leto izdelave: 1999, stanje: dober (rabljeno), Product: BMF Year of manufacture: 1999 Width of metal chain: 200 mm Guide strip: approx. 300 mm Chip discharge length: 900/1250 mm Feed-in length: approx. 1000 mm Feed-in height: 260 mm Feed-in width: 350 mm Total length: 3600 mm Transport height – discharge height: 800 mm Isdpfxshq Hz He Abxsth Belt speed: 26 mm/sec = 1.6 m/min Motor power: 0.25 kW Power supply: 400 Volt, 50 Hz Housing dimensions (H x W x D): 8700 x 900 x 1500 mm Weight: 400 kg

Stanje: zelo dobro (rabljeno),

Stanje: rabljeno, prevoženi kilometri: 3.799 km, moč: 90 kW (122,37 KM), vrsta goriva: električni, vrsta prenosa: samodejen, skupna masa: 2.660 kg, prva registracija: 11/2024, emisijski razred: Euro 6, barva: črn, vzmetenje: jeklo, število sedežev: 7, gorivo: elektrika, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, greljenje sedeža, klimatska naprava, nadzor oprijema, navigacijski sistem, parkirni grelec, parkirni senzorji, računalnik na krovu, servovolan, sistem za imobilizacijo, spojka prikolice, tempomat, LG7 LED high-performance headlamp, E07 Hill Start Assist, Q10 Crossmember for trailer coupling, FR8 Reversing camera, EY5 Mercedes-Benz emergency call system, SD1 i-Size child seat anchorage, EY6 Breakdown management, B25 Electric parking brake, EI0 Wireless charging system for mobile devices, T68 Child safety locks for doors and windows in passenger compartment, Z1M Registration M1, IA0 Wheel configuration 4x2, XO7 Mercedes-Benz Mobilo with DSB and GgD, R2H 40.6 cm (16") multi-spoke alloy wheels, T78 Sliding door track cover in body color, U98 Individual seats in 3rd row, Y10 First aid kit, 804 AEJ X3/1, VL2 Velour floor mats, SF6 Driver’s seat height-adjustable with lumbar support, RD9 Tires without brand specification, H00 Warm air duct to passenger compartment, NM5 MB-NA 60 2b with flange, low installation, medium speed, C6L Multifunction steering wheel, H22 Heated rear window, EM7 2 USB ports in rear center console, Z5L POWER STANDARD, Y44 Warning triangle, GA2 Automatic transmission for electric drive, P2F Active Safety Package, FP3 Mirror Package, FP4 Chrome Interior Package, XC8 VIN visible from outside, SZ6 Table and illuminated trim elements on backrest, JH3 Communication module (LTE) for digital services, X30 Registration certificate part II, FQ3 Glove compartment, passenger side, closed, I5T Underbody protection plastic, RY2 Tire pressure monitoring on front and rear axles, wireless, CK4 Gri. We are happy to provide you with an individual financing or leasing offer and will accept your used vehicle as trade-in. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age/mileage; the vehicle may have had additional paintwork carried out as part of preparation. No liability for printing and typographical errors. Errors and prior sale excepted. Click features may include digital extras which may be fully or partially available by paid subscription via MercedesMe for the duration of use. ... more on our homepage Iedpfx Absx Svunjxeth

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.155 kg, nosilnost: 200 kg, proizvajalec krmilnikov: KUKA, model krmilnika: KRC2, Oprema: dokumentacija / priročnik, Naprodaj: industrijski robot KUKA KR 200-2 comp v dobrem rabljenem stanju. Robot je iz industrijske uporabe in je delujoč. Pred dostavo bo robot ponovno popolnoma preizkušen, da se zagotovi brezhibno delovanje. Tako prejmete takoj pripravljeno in zanesljivo rešitev za vaše avtomatizacijske naloge. Ogled pod napetostjo je možen kadarkoli. Obseg dobave: - Mehanika (manipulator) Iodezdighjpfx Abxjth - Krmilna omara / krmilni sistem - Upravljalni panel (teach pendant) - Povezovalni kabli

Stanje: rabljeno, Leto izdelave: 2016, Delovno polje: X=3300 mm Y=1280 mm Z=150 mm Višina prehoda Upravljalni terminal: 24" barvni LED zaslon Ročni terminal za upravljanje hitrosti osi Programska oprema: "Woodflash" Vakuumska črpalka 90 m³/h/50 Hz oziroma 108 m³/h/60 Hz Rezkalno vreteno 12 kW HSK F63 (12.000 vrt./min) 12-pozicijski linearni menjalec orodja na levi strani stroja + pick-up prostor Vrtalna glava DH 16 4H 2S: 12 navpičnih vreten 4 vodoravna vretena 2 utorni žagi Lokacija skladišča: Nattheim Itodpfsxy Tlwox Abxsh

Stanje: rabljeno, številka stroja/vozila: 008170, Delovno območje os X: 4300 mm Delovno območje os Y: 2250 mm Delovna površina: nesting miza Moč glavnega vretena: 9 kW Število krmiljenih osi: 4 osi Število vrtalnih vreten: 12 Število mest za orodje: 14 Itjdpfxjx A Tcuo Abxeh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, ARBURG A 1500 T 2000-400 Vrtljiva miza (29.844 h) (S&P 3792) Leto izdelave: 2015 Obratovalne ure: 29.844 ur Polž: 40 mm Tlak vbrizgavanja: 2000 bar Volumen giba: 201 cm³ Zapiralna sila: 200 t Razmak med stebri: 1500 mm Min. višina orodja: 400 mm Maks. razmik plošč: 700 mm Dimenzije: 4700 x 2100 x 2600 mm Teža: 11.500 kg Ijdpfjzdf Sxox Abxoth Priključek: 22 kW Premer mize: 1500 mm, vrtljiva miza z 2 postajama (180°), dvojen izvlek jedra, izpiha naprava, vmesnik za barvni dozirnik, ogrevanje orodja, nova cena cca 250.000 € itd. Cena: po dogovoru Kontaktna oseba: g. Ralf Schulz