Rezkarji za navoje, 22 kosov

JAL PWS P 9930 Mgw P62003

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 25.05.004, skupna dolžina: 9.500 mm, skupna širina: 2.250 mm, skupna višina: 2.300 mm, vhodna napetost: 380 V, moč: 50 kW (67,98 KM), skupna masa: 21.000 kg, lastna masa: 18.000 kg, priključek za stisnjen zrak: 7 letvica, Oprema: dokumentacija / priročnik, Paper size 730 x 1060 mm and printing area 710 x 1040 mm Paper thickness 0.05 mm - 0.5 mm Set maximum speed (due to simulating sheet travel times of high-speed presses) is 4,000 per hour, but the machine can run much faster for commercial jobs. Four-cylinder central impression drum which completes all four print units in a single gripper closure. 1988 FAG Speedproof with control console for ink fountains and cylinder adjustment, ensuring extremely precise register printing. Attached is an original factory brochure. Fully dry ice cleaned, and the cylinders are in very good condition. This machine is offered strictly on an “as is” basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is strictly fixed and based on the removal of parts that we could otherwise sell separately, such as: - The Mabeg feeder with vacuum belt infeed; - The four-section Baldwin stainless steel unit, providing each color with its own basin, a mixer, and adjustable temperature—meaning each basin can be set to a different temperature and alcohol content. We have dry ice cleaned the machine. The original intent was to use it prominently for printing electronic paper, but due to excessive startup losses, the project was discontinued. The machine has been with us for three years now, and due to its size I want it sold quickly. Hence, this very low price—it's an excellent machine. If the machine needs to be set up for testing and trial runs, this is possible at an additional cost of €10,000, of which €5,000 must be paid upfront as a deposit under specific conditions. All relevant information can be found in the original FAG brochure available as a PDF via this advertisement. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lb) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar Bodpfeuf Sy Aox Afnjld

Stanje: rabljeno, Hallo, wir können anbieten: KBA 142-6-LV, Baujahr 1994 Bjdpjwqz Drofx Afnsld Lackwerk nach der 5. Druckeinheit, Baldwin Kühlgerät, Gummituch-Waschautomat, Weko T 77 Puder-Sprühgerät, Non-Stop Einrichtung an Anleger und Auslage, Plattenbiegeeinrichtung, IR- und Heißlufttrockner in der Auslage, CX-Einrichtung für Karton (ohne Kompressor), halbautomatischer Plattenwechsel, Delta-System am Varidamp.

Stanje: rabljeno, Leto izdelave: 2005, The Sakurai 466 SIP, year of manufacture 2005, carries serial number HF113105 and is a four-colour offset printing press with a maximum sheet size of 470 x 660 mm and a total output of 25 million impressions. The machine is currently in operation at a print shop in Germany and is equipped with the DTC Delivery Top Console featuring a touchscreen and complete remote control capabilities. It includes advanced automation systems such as SIS (Sakurai Interactive System) for print job preparation, SAS (Sakurai Auto Set) for paper size and thickness adjustment, and SPC (semi-automatic plate changing), as well as a plate travel register system and a tension register for precise alignment. The machine is fitted with automatic washing systems for the blanket cylinders and ink rollers, an Olivermatic dampening unit, and a Baldwin refrigeration and Bal Control system to ensure consistent print quality. The feeder features a suction belt feed table with electronic double sheet and side lay detectors, while the chrome-coated impression cylinders provide increased durability and performance. Additionally, the equipment includes a perfecting unit for 4/0 or 2/2 printing with full automation, medium-pile delivery, and a powder spray system. Bljdpsxa Eamofx Afnod The scope of delivery for the press includes a plate punch, a compressor, tools, and manuals. This makes the Sakurai 466 SIP a comprehensive and well-equipped solution for high-quality and efficient offset printing production. Format: 470 x 660 mm Equipment: - DTC Console (Sakurai Delivery Top Console) with touchscreen. Full remote control: - SIS (Sakurai Inter Active System) for make-ready - Plate travel register system - SAS (Sakurai Auto Set) for paper size and thickness - SPC (Semi-automatic plate change) - Tension register - Automatic washing systems: blanket cylinders & ink rollers - Olivermatic dampening system - Baldwin refrigeration system & Bal Control - Feeder with suction belt feed table - Electronic double sheet and side lay detector - Chrome-plated impression cylinders - Perfecting 4/0 - 2/2 (fully automatic) - Medium-pile delivery - Powder spray Including: plate punch, compressor, tools, and manuals

Leto izdelave: 2015, Stanje: zelo dobro (rabljeno), 10 Drehstähle Hersteller: Sandvik Coromant : 1: 340 SC5 DCLHR 291311 285 2226 2: 340 SC5 DCLHR 291311 285 2226 3: 340 SC5 DCLHR 291311 285 2226 4: C5-PCLNB-35060-12 Sumitomo 5: PSC50-DDHNL-35060-15 6: C5-PCLNB-35060-12 Sumitomo 7: C5-PCLNB-35060-12 Sumitomo Bjdpfsfr T D Tsx Afnold 8: SECO S5-DCLNR-35060-12 9: MPDES26073-105R03C 10: MPDES 26073-105RO03C Die Werkzeuge werden einzeln oder als Posten verkauft. Stückpreis: 80 Euro zzgl. MwSt.

Leto izdelave: 1991, Stanje: pripravljen za uporabo (rabljen), Y 018 Broaching Machine – Vertical Manufacturer: Hönnema Bjdjhf A I Nspfx Afnsld Model: HSR 9/1250 RST Machine Number: 166/HM 510275 Year of Manufacture: 1991 Pulling Force: 9 tonnes Stroke: 1,250 mm Footprint: approx. 230 x 120 cm With automatic feed External broaching possible with fixture

Stanje: rabljeno, Leto izdelave: 1975, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4159, Maximální obráběcí průměry: 4000 mm / 3500 mm (upínací deska) Rychlost upínací desky: max. 80 ot/min Bedpfx Aewqld Nofneld Maximální výška obrobku: 2000 mm Výkon hlavního pohonu: 55 kW Poznámka: vybavení pro broušení Maximální hmotnost obrobku: 40 t Pravidelný servis a údržba

Stanje: zelo dobro (rabljeno), Face mill (28148) Manufacturer: ISCAR 139.8 mm milling diameter 7.15 mm maximum depth of cut Accommodates 8 indexable inserts Bljdog Er H Rjpfx Afnjd Weight incl. box: 3.8 kg

Stanje: dober (rabljeno), Core drill, twist drill, drill bit, countersink, three-flute cutter, twist drill - Three-flute cutter - Diameter: 17.75 mm - Usable length: 150 mm - Shank: Morse taper 2 (MT2) - Type: HSSE (high-speed steel with cobalt) Blsdpsb A Rb Hefx Afnsd - Quantity: 19 pieces - Sale: only as a complete lot - Weight: 6 kg

Stanje: dober (rabljeno), Gear cutters, module cutters, hobbing cutters, gear shape cutters, module milling heads, slab end mills, cylindrical cutters, milling cutters, involute gear cutters, spline hobbing cutters - Manufacturer: Fette/JAL, 23 pcs. gear hobbing cutters - Arbor bore: Ø 16 mm (13 pcs.), Ø 22 mm (4 pcs.), Ø 27 mm (6 pcs.) - Various types: see photos, additional images available upon request - Price: for the complete set - Dimensions: 250/170/H90 mm - Total weight: 9.8 kg Bedpegfcnkofx Afnsld

Stanje: rabljeno, Keyway slotting head, slotting head suitable for milling machine DECKEL Type FP 2 Serial No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Distance from dovetail front edge to centre of gear: approx. 235 mm Stroke length: max. 80 mm Number of strokes: max. 210 double strokes/min Tool holder: square 16 x 16 mm with clamping plate - Stroke length adjustable via eccentric adjustment - Drive from machine gearbox, within dovetail guide (as with the standard vertical head) - This slotting head is inserted into the dovetail guide in place of the standard vertical milling head (installation in place of the vertical head / milling head) - Drive gear in slotting head: 39 teeth, gear width 16 mm, presumably 20° pressure angle - Slotting head can be rotated 360° on the flange plate, angle scale +/- 35° Weight: 32 kg Very good condition DECKEL FP1 has a pressure angle of 15° on the drive gear Blodpowbi Rbsfx Afned DECKEL FP2 + FP3 have a pressure angle of 20° on the drive gear