Metalclean L-30 Plus nakup rabljenega (79.981)

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 650 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WK3442232L4230097, prevoženi kilometri: 1.569 km, moč: 48 kW (65,26 KM), prva registracija: 01/2021, skupna masa: 3.500 kg, vrsta goriva: dizel, barva: modra, naslednji pregled (TÜV): 01/2025, voznikova kabina: dnevna kabina, emisijski razred: Euro 4, Oprema: je imel nesrečo, Kärcher MC 130 Plus – Condition, History, and Usage The offered sweeper Kärcher MC 130 Plus is in very good condition. The vehicle previously had only one owner, namely the City of Hamm. We took over the sweeper in 2021. At that time, it was fully operational but had a minor side damage that did not affect its functionality. This damage was professionally repaired by us. From 2021 to 2022, the sweeper was used exclusively at one of our properties. Since 2023, the machine has been stored in our facility and is only used internally once a month for cleaning the hall floor. As we will no longer be offering underground parking cleaning or sweeping services in the future, we have decided to sell the sweeper. Bjdpfox Rb D Esx Agtodb Additionally, a scrub deck for underground parking cleaning can be purchased for an additional €6,000. The scrub deck was purchased by us from Kärcher in 2022 (demonstration unit) and has never been used. A photo of the scrub deck is available.

Stanje: dober (rabljeno), Leto izdelave: 2013, obratovalne ure: 17.904 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 19261, potovalna razdalja osi X: 500 mm, pomik osi Y: 560 mm, pomik po osi Z: 500 mm, največja hitrost vretena: 15.000 obr/min, število mest v zalogovniku orodij: 71, Geometry protocol available TECHNICAL DETAILS Control: Fanuc 30iM Travel X: 500 mm Travel Y: 560 mm Travel Z: 500 mm Distance spindle to table: 80 - 640 mm Spindle Speed: 15,000 rpm Power: 15 kW Torque: 119 Nm at 1,200 rpm Bdsdpswm D Irjfx Agtjb Tool holder: BT40 Spindle bearing inner diameter: 70 mm Spindle speed command: 5-digit direct S-command Spindle orientation: electric Tool clamping force: 11.8 kN NC Rotary Table B-Axis: 0.001° Pallet size: 300 x 300 mm Table load (max.): 250 kg Workpiece size (max.): Ø530 x 760 mm Pallet clamping surface: (M12 x P1.75) x 32 Feed Rates Rapid traverse (X/Y/Z): 60,000 mm/min Feed rate (X/Y/Z): 1 – 60,000 mm/min Jog feed rate (X/Y/Z): 0 – 4,000 mm/min Min. movement increment (X/Y/Z): 0.001 mm Min. movement increment B-axis: 1 degree Tool Magazine Number of tool stations: 71 positions Max. tool diameter (with adjacent tools): 90 mm Max. tool diameter (without adjacent tools): 150 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool selection: fixed address system Tool change arm: W-gripper type Tool change time tool-to-tool: dependent on tool weight Tool change time chip-to-chip: target value dependent Tool station pitch: 95.25 mm Automatic Pallet Changer (PC2) Number of pallets: 2 Change method: rotary table Pallet exchange time (pallet-to-pallet): 6.5 s Total pallet exchange time: 7.0 s Pallet clamping force: 41.5 kN Max. pallet weight: 40 kg MACHINE DETAILS Machine height: 2,683 mm Footprint (excluding maintenance area): 2,145 x 3,655 mm Machine weight: 8,300 kg Power supply: 50 kVA Power-on time: 51,149 h Program run time: 30,722 h Machining time: 17,904 h Workpiece counter: 1,389 pcs EQUIPMENT - Chip management with chip conveyor - Coolant system with paper band filter and 70 bar high-pressure internal coolant (IKZ) - Workpiece measurement with Renishaw OMP60 probe - Tool breakage monitoring (tactile) - 2-fold pallet changer - Transformer - Rinsing gun

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.700 mm, pomik po osi Z: 1.500 mm, Heidenhain 530 Diagonalna rezkalna glava z indeksacijo 2,5° x 2,5° Število vrtljajev do 6.000 min⁻¹ Orodno vpenjalo SK50 Notranje hlajenje 36 bar Transporter za ostružke v vzdolžni smeri + prečni transporter Bedpfxox I A Hve Agtedb

Stanje: dober (rabljeno), Leto izdelave: 2008, PROIZV. ATLASCOPCO TIP GA30 PLUS S/N API595399 LETO 2008 MOČ (kW) 30 PRETOK (m3/min) 4,8 TLAK (bar) 10 URE (DOK/SKUPAJ) FREKVENČNIK ne VGRAJENI SUŠILEC ne IZMENJEVALEC ne HLADIL (ZRAK/VODA) zrak Bsdpfx Aeyhn R Sogtjdb

Stanje: novo, Leto izdelave: 2026, LAB 300 PLUS F 16 TERSA - Universal Combination Machine with Aluminum Sliding Table and Three Milling Speeds for sawing, milling, surface & thickness planing, and optional slot mortising Torsion-resistant steel and cast-iron frame Machine table made of cast iron, hardened and ground Smooth-running, anodized aluminum sliding table, 10-year warranty on guideways against wear Large crosscut table with extendable aluminum telescopic fence and flip stops Combination saw mitre fence with 45° quick adjustment Max. saw blade diameter 315 mm with optional scoring unit, tiltable from 90° to 45° Helical steel feed roller for uniform timber feed during thickness planing Four manually adjustable spindle speeds Standard reversible spindle rotation (clockwise and counterclockwise) Three independent motors for each operating unit Scope of delivery: Combination planing/parallel fence Curved guard hood for spindle moulder Tersa cutter block Anodized aluminium sliding table Aluminum fence jaws Flip stops Eccentric hold-down arm Model: LAB 300 PLUS F 16 Tersa Article No.: 5500314 Technical Data ---Circular Saw--- Cutting length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of blade: 1660 mm Rip capacity at fence: 800 mm Saw spindle speed: 3500 rpm Saw blade tilt: 90° - 45° ---Surface Planer--- Working width: 300 mm Planer table length: 1260 mm Cutter block diameter / Number of knives: 72 mm / 3 pcs. ---Thickness Planer--- Table dimensions: 300 x 450 mm Min./max. working height: 3 mm / 220 mm Max. depth of cut: 4 mm Feed speed: 7 m/min ---Spindle Moulder--- Usable spindle length: 100 mm Max. tool diameter, retractable: 180 mm Max. tenoning tool diameter: 275 mm Max. retractable tool diameter: 140 mm Spindle speeds: 3500/6000/8000 rpm Spindle diameter: 30 mm Motor output 400 V / 50 Hz / S6 - 40%: 4 kW (5.5 HP) S6 40% Weight: 430 kg Extraction port diameter: 4 x 120 mm Saw blade guard extraction port diameter: 60 mm Sliding Table with Ball Contact System Equipped with a proven ball contact system used millions of times Permanently smooth operation through hardened and ground guideways Not sensitive to dust and dirt due to minimal contact points between ball and rail Bjdpscnxa Nsfx Agtsdb 10-year Holzkraft warranty against wear on carbide guideways Extraction Hose Connection The extraction ports for the surface planer (1) and thickness planer (2) are aligned in the same direction. Therefore, the extraction hose can be attached from the same side for both planing operations. No need for a hose to go around the machine. Planer Units Helical steel feed rollers for continuous and uniform timber feed Heavy-duty anti-kickback fingers prevent material kickback 3-knife cutter block ensures optimum planed finish

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. Bedpfsg Ezarox Agtodb *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 15.756 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 16252, potovalna razdalja osi X: 500 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, model krmilnika: FANUC 30i, teža obdelovanca (maks.): 250 kg, TEHNIČNE PODROBNOSTI Pomik Pomik X-os: 500 mm Pomik Y-os: 500 mm Pomik Z-os: 500 mm Delovna miza Velikost palete: 300 x 300 mm Maks. teža obdelovanca: 250 kg Rotacijska miza: 360 x 0,001 Najmanjša/največja razdalja vreteno - sredina mize: 120/620 mm Najmanjša/največja razdalja vreteno - površina mize: 80/580 mm Maks. velikost obdelovanca: 500 x 500 mm Hitrosti vretena: 50 - 15.000 obr/min Vreteno: ISO 40 Pogonska moč na vretenu: 15/7,5 kW Bjdpfjxnwy Iox Agtsdb Pomiki X/Y/Z: 1 - 50.000 mm/min Hitri pomik: 50 m/min Hitri pomik B-os: 33,3 obr/min PODROBNOSTI STROJA Krmiljenje: FANUC 30i Skupna potrebna moč: 38 kVA Teža: 10.000 kg Obratovalne ure Obratovalni čas: 15.756 h Vklopne ure krmiljenja: 116.776 h

Stanje: rabljeno, Leto izdelave: 2010, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, skupna masa: 251 kg, rezalni tok: 130 A, zračni tlak: 4,5 letvica, napetost odprtega kroga: 400 V, vrsta zaščite (IP koda): IP22, vhodni tok: 46 A, Ponujamo ta rabljeni Kjellberg HiFocus 130, letnik 2010. Tip: HiFocus 130 Minimalni izhodni tok: 20 A Minimalna izhodna napetost: 88 V Maksimalni izhodni tok: 130 A Maksimalna izhodna napetost: 132 V Obratovalni cikel: 100 % Napetost v prostem teku: 400 V Število faz: 3 Bodsygimxopfx Agtsdb Omrežna frekvenca: 50 Hz Omrežna napetost: 400 V Maksimalni omrežni tok I₁max: 46 A Efektivni omrežni tok I₁eff: 46 A Stopnja zaščite: IP22 Razred izolacije: F Vrsta hlajenja: AF Teža: 251 kg Minimalna priključna moč: 0,7 kW Maksimalni delovni tlak: 0,45 MPa Preskusna napetost: 17 kV Če imate kakršnakoli vprašanja ali potrebujete več informacij, nam pišite sporočilo.

Stanje: novo, Delivery pressure: 10.0 bar Intake capacity: 727 L/min Effective delivery volume: 582 L/min Tank capacity: 90.0 L Motor: 400 V Drive power: 4.0 kW Machine weight: approx. 91.0 kg Dimensions (L x W x H): approx. 1040 x 450 x 850 mm Description: - Mobile tradesman piston compressor - High-quality, 2-stage compressor unit - Equipped with 2 cast iron cylinders for optimum efficiency - Finely ribbed cylinders and cylinder head for optimal heat dissipation - Low compressor speed to reduce compression temperature and minimize wear - Very low residual oil content in compressed air due to precision piston rings - Large, solid rubber wheels and front swivel castors - Start-up relief provided by a mechanical unloader valve - Powder-coated compressed air tank in RAL 7035 - Manufactured according to the European Pressure Equipment Directive - All fittings sealed with easily removable special sealant for simple replacement if required Standard scope of delivery includes: - Condor pressure switch MDR 3 - High-quality filter pressure regulator - Two pressure gauges Bodpfx Agjw U U Tastsdb - Condensate drain valve - Pre-assembled connection cable with 5-pole plug and phase inverter

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 4.500 mm, skupna širina: 2.230 mm, skupna višina: 3.000 mm, volumenski pretok: 9.250 m³/h, moč: 250 kW (339,91 KM), vhodna frekvenca: 50 Hz, 1 unit rotary lobe blower Manufacturer: Kemostal (Tuthill M-D Pneumatics) Model: KPAB 1230 PD-Plus Volume flow rate: 9,250 m³/h (154 m³/min) Differential pressure: 500 mbar Maximum process pressure: 1,000 mbar Bsdpfov T Tr Isx Agtjdb Discharge line (unit): Ø 406.4 mm Electric motor: ABB Model: M2CA 355MA 4 B3 Power: 250 kW Speed: 1,487 rpm Voltage: 400 / 690 Volt Acoustic enclosure: with 4 doors Length: 4,500 mm Width: 2,350 mm Height: 3,000 mm

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 5.000 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 3 kg, skupna dolžina: 500 mm, skupna širina: 500 mm, skupna višina: 200 mm, vhodna napetost: 24 V, vhodni tok: 4 A, vrsta vhodnega toka: Enosmerni tok, naprodaj ̶1̶.̶ FANUC A13B-0202-B002, 15-palčna plošča 2. Samostojna kontrolna enota FANUC - A02B-0323-B804 s 4 možnostmi: A20B-8101-0742 (FSSB-3) A20B-8101-0050 (Master CN1) A20B-8101-0770 (ETHERNET CD38R) A20B-8101-0770 (ETHERNET CD38R) ----- 3. Tipkovnica za FANUC - A02B-0323-C231 Bdsdpfx Aewq Dpdegtjb Možen je nakup posameznih delov.

Stanje: novo, Schunk PZN-plus 80/2 3-prstni centrični prijemnik AG 0303, neuporabljen v originalni embalaži, 100% delujoč, dobava kot na fotografijah. Bdsdpfox Eudhex Agtjb

Stanje: novo, Schunk PZN-plus 80/2 3-prstni centrični prijemalnik HA 030135, neuporabljen v originalni embalaži, 100% funkcionalen, obseg dobave po slikah. Bsdox Eudnopfx Agtodb

Stanje: dober (rabljeno), Leto izdelave: 2013, LVD Orion 3015 Plus laser cutting system, Year of manufacture: 2013, Control: LVD, Travel range X/Y/Z: 3080/1555/240 mm, Sheet size: 3,000 x 1,500 mm, Max. sheet weight: 750 kg, Laser power: 2.5 kW, CO2 laser, Bedpfx Aswcft Uogtodb Max. cutting capacity (steel/stainless steel/aluminium): 16/10/6 mm,

Stanje: novo, Leto izdelave: 2026, Tlak 150 t Dolžina krivljenja 3100 mm Razmak med stojali 2600 mm Bjdpfx Aowyd Thjgtodb Globina grla 400 mm Maksimalna dolžina hoda 200 mm Pomik v osi x 600 mm - Nova stroj - z EasyBEND-2D MT z 21,5" zaslonom, popoln komplet orodij VOLZ/EuroStamp, hiter zadnji prislon, varnostni sistem DSP, CNC upravljano bombiranje mize in 2 pomični/zložljivi podporni roki * Za več informacij o točni serijski opremi in razpoložljivih opcijah nas obiščite na spletu ali nas kontaktirajte neposredno *

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, CNC control: HEIDENHAIN iTNC530 Axes Travel X-axis mm: 3,000 Travel Y-axis mm: 1,700 Travel Z-axis mm: 1,500 Feed rates m/min: 10 Rapid traverse m/min: X, Y: 20; Z: 10 Worktable Bodpfx Agorw Arzotsdb Pallet dimensions mm: 3,200 x 1,200 Max. table load kg: 8,000 T-slots: 7xT22 – 150 mm spacing Spindle Max. spindle speed rpm: 30 – 5,000 Spindle drive power kW: 28/38 Gear steps: 2 Cooling Coolant supply through spindle bar: 22 Tool system Tool holder: ISO-50 DIN 69871A Equipment Electronic handwheel Chip conveyor 4th axis prepared

Leto izdelave: 2006, stanje: zelo dobro (rabljeno), žaga Kotna žaga z vrtanjem BALESTRIERI TECHNA PLUS 3001 Bdodpfx Asd Ifgvegtob Proizvajalec: BALESTRIERI Model / tip stroja: TECHNA PLUS 3001 Leto proizvodnje: 2006 Kategorija stroja: žaga-plug Premična žagalna glava s pogonom pozicioniranja preko pogonskih enot in elektronskim digitalnim prikazovalnikom. Vodila so iz kaljenih letev s krožnimi krogličnimi vodili. • 2 enoti z rezilom Ø 400 mm – vsaka enota z močjo pogona 3 kW • Kapaciteta (radialni sistem) pomične drsne enote • 2 pomožni mizici s sestavnimi deli, opremljeni z navpičnimi pnevmatskimi vpenjali • 1 posredna mizica za podporo • Elektronsko digitalno odčitavanje položajev • 2 vrtalni enoti s 5 vreteni razmika 32 mm – motorji 1,5 kW (5500 vrt/min) – vodila za pomik drsne enote • Mehanski odčitek za navpične in vodoravne korekcije – vrtalne glave so lahko orientirane navpično ali vodoravno • Zagon cikla z dvoročnim gumbom (v skladu z varnostnimi predpisi) ter pnevmatskim pedalom • Samodejni izmet odpadnega materiala • Največja višina reza: 145 mm • Največja širina reza: 300 mm • Najmanjša dolžina reza: 170 mm (z avtomatskim nakladanjem/razkladanjem 355 mm) • Največja dolžina reza: 3100 mm • Moč motorja: 1,5 kW ----- Dimenzije (D x Š x V): - Teža: 2300 kg Obratovalne ure: - Ure priključitve na elektriko: - V dobrem tehničnem stanju V skladu s CE standardi ----- • Teža: 2300 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2002, obratovalne ure: 15.542 h, številka stroja/vozila: 37/7, vrsta upravljanja: CNC krmiljenje, model krmilnika: RAS System 6000, delovna širina: 3.200 mm, najv. debelina pločevine: 2 mm, TECHNICAL DETAILS Working width: 3,200 mm Max. sheet thickness: 2.0 mm Backgauge: 3,050 mm Control: CNC Control type: RAS System 6000 Motor power: 3.3 kW MACHINE DETAILS Dimensions & Weight Overall length: 4,400 mm Overall width: 2,100 mm Overall height: 1,500 mm Net weight: 3,500 kg Operating hours: 15,542 Bsdpfowyv Rxex Agtjdb EQUIPMENT Documentation available CE marking available Transport packages: 3

Stanje: dober (rabljeno), Leto izdelave: 2008, Pomiki X Y Z: 3000 x 1300 x 2000 mm, Bjdpevz A Risfx Agtjdb Miza: 2000 x 1600 mm, Nosilnost mize: 13.000 kg, Os B: 360 stopinj, Heidenhain iTNC530, Vreteno s stožcem ISO SK50, Hitrost vretena: 5.000 obr./min., Izmenjevalec orodij za 60 orodij, Hladilni sistem, varnostne zaščite z medlocko.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 6.490 mm, skupna širina: 3.220 mm, Bottero CNC Leto - 2022 Model - Pratica Plus 3300 Avtomatski menjalnik orodij Kompletno z vsem orodjem in rezervnimi deli V odličnem stanju, minimalno uporabljeno Bsdpfx Ajydbigjgtjdb Dostava in montaža sta na voljo.

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, moč hladilne črpalke: 150 W, moč motorja brusilnega vretena: 1.500 W, skupna masa: 510 kg, premer brusilnega koluta: 230 mm, Naprodaj Wadkin kopirni brusilni stroj v dobrem stanju, z širokim delovnim območjem. Bjdpfxjyk S U To Agtjdb

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 470 mm, stružna dolžina: 3.000 mm, premer struženja: 720 mm, izvrtina vretena: 104 mm, CNC Lathe Geminis 4 Plus 720 x 3000 mm Description: Manufacturer: Geminis Model: CNC 4 Plus Control unit: Fagor 8055 FL-BT CNC Specifications: - Distance between centers: 3,000 mm - Swing over bed: 720 mm - Swing over cross slide: 470 mm - Spindle bore diameter: 104 mm - Tailstock quill diameter: 100 mm (Morse taper 6) Bdedpfowuligsx Agteb - Bed width: 550 mm Speeds: - 2 speed ranges: 0–1,600 rpm Rapid Feed Rates: - X-axis: 8 m/min - Z-axis: 8 m/min Motor: - Power: 22 kW Weight: 8,000 kg Equipment: - Fagor 8055 FL-BT CNC - SCHUNK Rota-S Plus 3-jaw self-centering chuck Ø 315 mm - Additional 3-jaw chuck - Fixed steady rest - Chip conveyor

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2004 Širina: 500 Dolžina: 500 Višina: 500 Število osi: 4 Nosilec orodja: BT40 Hitrost vretena (Rpm): 15.000 Vrsta obdelovalnega materiala: jeklo, aluminij, titan, grafit, baker, invar, kompozit, Delrin, Peek Bsdpfxsx Tzn Ns Agtodb

Stanje: rabljeno, moč: 50 kW (67,98 KM), barva: rumena, skupna masa: 6.650 kg, velikost pnevmatike: 365/80 R20, število sedežev: 1, Leto izdelave: 2005, obratovalne ure: 7.480 h, Oprema: kabina, Hitromenjalna naprava Bdedey Id Nfepfx Agtsb Hidravlični hitri menjalec 3 krmilni krogi Pridržujemo si pravico do napak

Stanje: pripravljen za uporabo (rabljen), HSM V-Press 860 baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Bjdpfx Asra Rbgjgtedb Cycle time: 25 s Loading height: 1,110 mm Feeding opening (W x H): 1,195 x 650 mm Bale size (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Pressable materials: film, mixed paper, cardboard, die cuttings, textiles, Big Bags, EPS HSM V-Press 860 plus baler, year 2013-2015, price: €8,000 HSM V-Press 860 L baler, year 2015, price: €9,000 HSM V-Press 860 plus baler, year 2019, price: €9,000 HSM V-Press 860 plus baler, year 2024, price: €10,000 HSM V-Press 860 new, ex-display, year 2020, price: €13,000 4-fold wire bale tying Bale dimensions (L x W x H) mm: 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H): 1,213 x 1,824 x 2,987 mm Feed opening: 1,200 x 565 mm Cycle (seconds): 35 Pressing force (T): 54 Power supply: 400 V (three-phase) HSM V-Press 860 plus B baler, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V / 50 Hz Power: 4 kW Feed opening (W x H): 1,500 x 651 mm Bale size (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Loading method: manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Pressable materials: film, cardboard Idle cycle time: 25 s