Kellenberger 600U Bema Advance nakup rabljenega (2.951)

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 32461/2384, Country of Manufacture: Switzerland Voltage: 380 V / 50 Hz / 3-phase Net Weight: 2,200 kg TECHNICAL DATA Nominal centre distance: 600 mm Maximum centre distance (workpiece spindle head to tailstock extended): 750 mm Standard centre height: 125 mm Centre height with interchangeable intermediate plates (workpiece spindle + tailstock): 175 – 250 mm Maximum swing diameter (125 mm centre height): 250 mm Maximum swing diameter with intermediate plates: 350 – 500 mm Swivelling range of work table (left/right): 10° each Maximum grinding length (table width = 200 mm): 900 mm Table speed, hydraulically infinitely variable: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for cylindrical grinding (diameter x width x bore): 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding (diameter x width x bore): 250 x 13 x 76 mm Grinding spindle speeds: 1,500 / 1,700 / 2,200 / 3,600 rpm Swivelling range of grinding spindle head: 270°, lockable every 90° Vertical traverse of grinding spindle head (centre height): 125–350 mm Cross traverse of grinding slide: 285 mm Hydraulic rapid infeed and retraction of the grinding slide: 40 mm Feed per table reversal, stepless: 0.001–0.03 mm/rev. Plunge grinding stock removal: 0–0.9 mm/rev. Micrometer stop for infeed per division: 0.001 mm/rev. Swivelling range of workpiece spindle head: 360° Workpiece speeds, steplessly adjustable, standard/special: 20–400 / 10–400 rpm Internal taper, workpiece spindle/tailstock: Morse 5 / Morse 3 Grinding spindle motor approx.: 4 hp Errors and omissions excepted. Technical data provided subject to confirmation. Inventory no. 2170089, Machine accessories list: - 1 Workpiece spindle head, Morse Taper 5 - 1 Sine bar without comparator Podpfx Aod Amifjgxjpr - 1 Grinding spindle head with 4 drive pulleys - 1 Tailstock, Morse Taper 3 - 1 Collet clamping system with extractor and reduction sleeve B32 - 1 Internal grinding attachment with Fischer UJ50x250 arbor, drive pulley Ø 48 mm for 14,000 rpm - 1 Rotatable wheel dressing unit with 50 mm base - 1 Table swing stop without comparator - 1 Coolant system with decantation - 1 Ejector - 1 Balancing bar

Stanje: rabljeno, TEHNIČNI PODATKI - Razdalja med konicami: 600 [mm] - Višina konic: 175 [mm] - Nagib mize: 11 [°] UNIVERZALNI NOSILEC BRUSNEGA KOLESA – VRETENO - Mere levega brusnega kolesa: 400 x 50 x 127 [mm] - Mere desnega brusnega kolesa: 225 x 20 x 76,2 [mm] - Moč motorja: 3 [kW] - Hitrost vretena: 1500 / 1700 / 2200 - Usmerjenost nosilca brusnega kolesa: 270 [°] NOSILEC OBDELKA – VRETENO - Usmerjenost nosilca obdelka: 360 [°] - Hitrost vretena obdelka: 20 – 400 [min⁻¹] - Notranji stožec: Morse 5 - Moč motorja: 0,9 [kW] PROTIVRETENO - Notranji stožec: CM4 - Hod pinole: 30 [mm] DIMENZIJE - Potreben prostor: 2580 x 1680 [mm] Ppjdpfx Aouhbywogxjr - Višina: 1670 [mm] - Teža: 2200 [kg] OPREMA - FISCHER notranje vrtalno vreteno: 14.000 [min⁻¹]

Stanje: zelo dobro (rabljeno), z notranjo brusilno napravo Ppjdpfx Aey H Dq Hegxsr Višina konic: 125 mm Razdalja med konicama: 1000 mm Velikost mize: 1650 x 145 mm Brusni kolut: 400 x 50 x 127 mm Brusni kolut: 225 x 20 x 76,2 mm Hitrosti brusnih kolutov: 1.500 – 2.200 obr/min Brusilna glava vrtljiva: 270° Razna dodatna oprema MARCELS MASCHINEN AG

Stanje: dober (rabljeno), Leto izdelave: 2002, Leta 2019 je bila vgrajena nova krmilna enota za 14.000 €. Psdpfx Ajykl Rzsgxepr Maksimalni premer upogibanja: 63,5 mm Minimalni upogibni radij: 32 mm Motor: 30 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Premer brušenja: 80 - 250 mm Dolžina brušenja: 600 mm Višina konic: 175 mm Vzdolžni pomik: 750 mm Obratovalne hitrosti obdelovanca: 6 - 600 min⁻¹ Hitrost brušenja vretena: 1500 - 3600 min⁻¹ Prečni pomik - avtomatsko in ročno: 320 mm Krmiljenje: Kelco 80 Teža stroja pribl.: 4,4 t Ppjdpfoyb S Rcsx Agxjr Potrebni prostor ca.: 3,1 x 2,1 x 2,0 m

Stanje: delavnici obnovljeno (rabljeno), KELLENBERGER KEL-VISTA UR 175X600 je CNC okrogla brusilnica za visoko natančnost, zanesljivost in natančno obdelavo. Kapaciteta: višina konic 175 mm; razdalja med konicama 800 mm; dolžina brušenja 600 mm; maks. Ø 349 mm; maks. masa 100 kg. Ključni podatki: Z 750 mm; X 320 mm; dimenzije brusnih diskov L Ø400×80×127, R Ø300×40×127; hitrost brusnega diska 875–1900 min⁻¹ (brezstopenjsko); brusilni motor 5 kW; obdelovalno vreteno 8–800 min⁻¹; hitro pomikanje 12 m/min; 3×400 V 50 Hz; teža približno 3000 kg; dimenzije 3200×1700×2000 mm. Oprema: hlajenje, notranji hladilni krog, papirni filter, tipalo MARPOSS, merilni sistem MOVOMATIC, notranja brusilna naprava, uravnoteževalna naprava, RS-232. Primerna za tesne tolerance v avtomobilski, urarski, letalski in medicinski industriji. Psdpfoyxn Iyex Agxepr

Stanje: rabljeno, KELLENBERGER KEL-VARIA R175 x 1500 is a CNC cylindrical grinding machine designed for high precision, utmost accuracy, and reliable operation. Capacities: centre height 175 mm, centre distance 1500 mm, Z-axis 1650 mm, maximum workpiece weight 150 kg; grinding wheels Ø500×80 mm (bore 203 mm) or Ø400×63 mm (bore 127 mm); grinding spindle travel max. 320 mm. Technical data: stepless grinding wheel speeds 1000–2150 rpm (peripheral speed 45 m/s); feed 7,500 mm/min; workpiece spindle swivels -10/+100° with 8–800 rpm; permissible load 160 Nm; grinding spindle motor 7.5 kW, workpiece spindle motor 2 kW; connection 3×400 V 50 Hz; rapid traverse 15 m/min; weight approx. 6,000 kg; dimensions 4,700×2,300×2,000 mm; compressed air 6 bar. Accessories: coolant system, paper band filter system, MARPOSS touch probe, set of grinding wheels, live centre, set of centres, set of workpiece drivers, set of gap gauges, lighting, 2 tool cabinets, tailstock with fine adjustment, coolant/mist extraction, collet chuck. Achieves tight tolerances. Ppjdpfx Aoyxn Itogxjr

Stanje: rabljeno, KELLENBERGER KEL‑VARIA R175 x 1500 je CNC okrogla brusilni stroj za visoko natančnost, točnost in zanesljivost. Kapacitete: višina med konicami 175 mm, razdalja med konicami 1500 mm, Z-os 1650 mm, do 150 kg; brusni koluti Ø500×80 mm (tudi Ø400×63 mm). Tehnični podatki: hitrost vrtenja brusnega koluta 1000–2150 min⁻¹, obodna hitrost 45 m/s, brusalni hod 320 mm, podajanje 7500 mm/min, motorji 7,5/2 kW, hitro premikanje 15 m/min, 3×400 V, teža ≈6000 kg, mere 4700×2300×2000 mm. Oprema: papirni/krožni filter, MOVOMATIC, Renishaw LP2H, snemalec prirobnic, daljinski upravljalnik, MPM. Za ozke tolerance; panoge: avtomobilska industrija, urarstvo, orodjarstvo, letalstvo, medicinska tehnika. Podpfx Agjyxn A Roxspr

Stanje: rabljeno, TECHNICAL DATA - Distance between centers: 1000 mm - Center height: 175 mm - Table swiveling angle: 9 degrees - Universal grinding wheelhead spindle - Left grinding wheel dimensions: 400 x 50 x 127 mm - Motor power: 3 kW - Spindle speeds: 1500 / 1700 / 2200 rpm - Wheelhead orientation: 270° (3 x 90°) - Internal spindle bore: 90 mm - Workhead orientation: 180 degrees - Spindle speed: 20 – 400 rpm - Spindle internal taper: Morse 5 - Motor power: 0.9 kW - Tailstock internal taper: Morse 4 - Tailstock quill stroke: 30 mm - Dimensions: 2860 x 1680 x 1670 mm - Machine weight: 2500 kg ACCESSORIES - Automatic cycle (roughing, finishing, and return) - Counter centre - Coolant tank with paper filter - 1 internal grinding spindle - 1 diamond holder - 2 steady rests with two-point contact - 1 steady rest with three-point contact - 1 set of drivers Podsxy S A Iopfx Agxjpr - Various grinding wheel holders

Stanje: dober (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 31.211.014, višina središča: 225 mm, dolžina brušenja: 1.000 mm, premer brusilnega koluta: 400 mm, premer brušenja: 500 mm, premer obdelovanca med konicama: 500 mm, Kellenberger UR 175x1000 CNC Kelco 70, popolnoma delujoč Pedeyyur Ijpfx Agxspr Povečava z 175 na 225 je na voljo Št. stroja: 31.211.014 Leto izdelave: 1987 Priprava za notranje brušenje Krogličnovijačna os X zamenjana leta 2017 Karta osi Z zamenjana leta 2021 Ležaj konjička obnovljen leta 2017 Monitor zamenjan leta 2023 Dodatna oprema: 1x prirobnica za brusni disk levo 1x prirobnica za brusni disk desno 1x podstavek 1x delovni magnet 1x papirni tračni filter Dodatna oprema na zahtevo Brez garancije, jamstva ali vračila Takoj na voljo, iz lokacije Po potrebi možno organizirati prevoz

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE MODEL: 1000 U YEAR OF MANUFACTURE: 2000 PARTIAL OVERHAUL: 2026 Centre height: 175 mm Grinding length: 1000 mm Equipment: - Standard accessories - Standard workpiece headstock MK5 with adapter flange DIN 55027, size 5 - Splash guard for above - Tailstock with micrometer adjustment, MK4 - Internal grinding device with protective cover for grinding spindle D:80 mm for belt-driven spindles - FISCHER internal grinding spindle type HJN 842 incl. grinding arbors (4 pieces of your choice) - HJNZ 42 chuck - Oil mist lubrication unit for HJN spindles - STREULI magnetic paper band filter system, type SPB 2 - Coolant supply through the workpiece spindle - HEIDENHAIN digital length measuring system on X and Z axes - Sine bar on the workpiece headstock including alignment arbor MK5 - Permanent magnetic chuck, D:200 mm - Three-jaw chuck, D:160 mm - Four-jaw chuck, D:160 mm - Collet device for Schaublin collets B32 - Set of collets B32, D: 1.0-30.0 mm, steps of 0.5 mm (59 pieces) - Dial gauge stop for table swivelling with dial gauge 0.01 mm - Table fixed stop Ppsdpfx Agoyf E Sujxer - Dressing stop for internal grinding - LED machine lamp - Various grinding wheel flanges, left (2 pieces) - Pneumatic upper table compensation - Swivelling dressing device for external, face, or internal grinding - Set of vibration-damping pads - New three-tone paint (light grey RAL 7035/blue RAL 5012/dark grey RAL 7016) - New acceptance protocol according to KELLENBERGER standard - Documentation - CE conformity Machine is currently being overhauled, images shown are sample photos!

Stanje: rabljeno, Leto izdelave: 2000, Grinding diameter 450 mm Grinding length 1000 mm Centre height 225 mm Photo of a previously delivered machine with similar configuration: - Major maintenance performed - Table geometry reconditioned - Partial interior repaint Grinding wheel equipment LEFT 400x63x127 mm (standard) Grinding wheel equipment RIGHT 300x40x127 mm Internal grinding attachment Ø120 mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding, Kel-Poly B-AXIS: CNC-controlled B-axis Psdpfx Agexzk Nioxopr KELCO 120: v constant 35 m/s or 45 m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro adjustment on the tailstock Spring-loaded quill insert Upper table cooling Standard workpiece spindle head MK 5 DIN 55026 Size 5" Micro-adjustment for standard workpiece spindle head Dressing device under the table Active longitudinal positioning KELPOS, MARPOSS, mounted on grinding head Tool measurement system KELSET, MARPOSS Touch-off sensor MARPOSS MARPOOS Minialsar measuring control prepared Paper band filter

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 500 mm Overhauled according to Kellenberger guidelines, including new, modern, and future-proof control system. New servo motors in X-axis and for the workpiece spindle head. Photo shows a previously delivered machine in standard configuration. - Operation via touch panel is extremely user-friendly. - The symbolism on the control panel is virtually identical to the original control system, eliminating the need for retraining. - Diagnostic function with display of PLC notifications and the digital I/O - Dressing function can be expanded or modified according to customer requirements. - Optionally, workpiece spindle can be stopped in a defined orientation. - New maximum infeed of 40 mm, expandable upon request. - Digital readout in 2 axes. Resolution in X-axis: 0.5 µm Options: - Encoder with digital display in the workpiece spindle head - Encoder with digital display in the grinding spindle head (height adjustment with spindle not possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment. - Increase in centre height to a maximum of 225 mm - Speed control for the grinding spindle Included: - Operating tools Pjdeuwv Idspfx Agxjpr - Clamping tube for chuck Further accessories available upon request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic longitudinal table movement and rapid traverse. Versatile application in production for external and internal cylindrical grinding, or combined external, face, and internal grinding in a single setup for individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Gauging control Please note: The machine tool currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. The required minimum safety level must be determined by means of a risk assessment according to BetrSichV.

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control: FAGOR EQUIPMENT - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - T6: Internal grinding attachment - T7: Internal grinding attachment - Spindle motor water-cooled, 9.8 kW - Marposs tool measurement - Active longitudinal positioning Pjdouxfu Njpfx Agxspr - Kel-Set - GAP on T1 and T2 from ELASO, contactless, integrated into the control interface - GAP on T3/T4 via fluid sensor - Semi-automatic balancing by ELASO integrated into the control interface for T1/T2 - Hydraulic tailstock with fine adjustment +/- 150 μm - Dressing device on lower table, workpiece spindle side - Dressing device on lower table, tailstock side - Dressing device on upper table - New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece spindle head with direct drive * Strongly recommended for non-circular grinding * Max. workpiece weight (chucked): 75 kg * Max. workpiece weight (between centers): 150 kg * Water-cooled * MK5 combined with short taper mounting DIN 55026 * Oriented spindle stop * Fixed base B-axis with direct drive, centre height 225 mm * Extremely torsion-resistant * High positioning accuracy * Resolution ° * Water-cooled MECHANICAL OVERHAUL: - Complete machine refurbished according to Kellenberger measurement protocol - Repainted New hydraulic power unit: - Improved temperature control (oil cooler) - Energy-saving: Only one pump, not running continuously! - Pressure monitoring - Monitoring of water content in hydrostatic oil (early detection of bellows damage) Hydrostatic ball screw drive in X-axis - Wear-free, as no contact during operation - No loss of accuracy, even during prolonged operation under full load at max. speed - Frictionless at low speeds - No reversal backlash when changing direction - Transmits minimal rotational movements - No stick-slip effect at low speeds - No fluctuations in friction torque due to ball circulation - Higher axial stiffness than ball screws - Significantly better damping, resulting in improved workpiece surface and tool life - No oscillations due to ball circulation - Suitable for high speeds and accelerations - Cost-effective alternative to linear motor with higher accuracy and much lower heat generation - Significantly lower power loss and no issues with chips sticking to permanent magnets - Much lower cooling requirements than linear motors Electrical overhaul: - Brand new, modern CNC cylindrical grinding control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, BERUS pressure switches, etc. - New absolute linear scales in X and Z axes - New absolute encoder (for B-axis) Control: The grinding software consists of a basic license and various options that can be enabled depending on machine equipment. Basic software: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed on the wheel) - Semi-automatic oscillation grinding - Workpiece...

Stanje: rabljeno, Leto izdelave: 1982, Grinding diameter: 630 mm Grinding length: 600 mm Centre height: 320 mm The machine has been overhauled according to the Kellenberger measurement protocol and newly painted. The prone-to-failure Güttinger control system was replaced with the modern BEMA X control system. This means that, in the process, the machine also received completely new electrical equipment. Pedpfsvq R Uzsx Agxspr The machine features a reinforced workpiece headstock for through-feed grinding of heavy workpieces. At present, the machine does not comply with the basic safety and protection requirements as specified in the German Industrial Safety Regulation (BetrSichV) 2015. Raising the required minimum protection level must be determined by a risk assessment in accordance with the BetrSichV.

Stanje: rabljeno, Leto izdelave: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine equipped with reinforced workpiece spindle headstock for cantilever grinding of heavy workpieces. The machine will undergo major maintenance/partial overhaul including a geometry inspection report according to the Kellenberger new machine guideline. Psdpfx Ajv Dxxzegxjpr At present, the machine does not meet the basic safety and protection requirements as specified in the German Industrial Safety Regulation (BetrSichV 2015). The required minimum safety target must be determined by means of a risk assessment in accordance with BetrSichV.

Stanje: rabljeno, Grinding diameter: 250 mm Grinding length: 1000 mm Center height: 125 mm Grinding wheel diameter: 500 mm Grinding wheel width: 80 (100) mm Bore: 203.2 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: +/- 360° Grinding spindle head swiveling: +/- 0° Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: +/- 10° Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (unsupported, including clamping): 130 kg Cross travel: 270 mm Tailstock quill taper: MK3 Quill travel: 30 mm Total power requirement: 5.5–7.5 kW Machine weight approx.: 2.7 t As a global leader in Kellenberger overhauls/retrofits, we can not only deliver machines in as-new condition with warranty, but we also offer service for your equipment. Geometrically refurbished and newly painted according to Kellenberger test protocol. Completely new electrics with new infeed control system. Photos show a previously delivered machine of the same model, but with 1500 mm center distance and a universal grinding head instead of 500 mm wheel head for external cylindrical grinding only. Ppsdpfsd Ih Egsx Agxsr Equipment: - 2-axis digital readout - New DGS paper band filter Optional at additional cost: - Semi-automatic dressing - Dressing compensation - GAP control - Measuring automation - Safety doors Electronically controlled infeed system with stepper motor drive. Hydraulic table traverse and rapid movement. Powerful, non-swiveling grinding spindle stock for production external cylindrical grinding operations. Application areas: Machining of high-precision components for gear manufacturing, machine tool, and general mechanical engineering. Match grinding for the hydraulics industry. At this time, the machine does not meet the fundamental safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum safety objective must be determined by a risk assessment according to BetrSichV.

Stanje: rabljeno, Leto izdelave: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Control unit Fanuc 310is Completely mechanically overhauled. Includes grinding process and setup for one part. Original photo of the machine from EMO 2010. CNC control GE Fanuc 310is Hand panel for GE Fanuc CNC control With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Left grinding wheel assembly 500 x 80 mm Right grinding wheel assembly 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through workpiece spindle Dressing device on the upper table Swivelling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on workpiece spindle headstock for internal and external grinding Provisions for measuring controls Movomatic ESZ 400 or Marposs P7 ME Provisions for external filter Coolant shut-off for table devices Full enclosure for emulsion Pedsvdk N Eopfx Agxopr Emulsion mist extraction system Maintenance unit for pneumatic auxiliary functions Provisions for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for Arobo steady rest

Stanje: rabljeno, Leto izdelave: 1995, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina konic 175 mm Delno obnovljen stroj z merilnim protokolom v skladu s tolerancami za nove stroje NOV sistem vodenja Eckelmann ENC z BEMA programsko opremo za brušenje Numerično krmiljena B-os Notranja brusilna naprava premer 80 mm Brusni kamen levo premer 400 mm Brusni kamen desno premer 300 mm Notranje brusilno vreteno HJN 828 Hidravlični konjiček Mikro nastavitev Merilni sistem KEL SET Pjdoyatx Sjpfx Agxopr

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Left grinding wheel: 600 mm Ppjdpfst Ii Rfsx Agxor Grinding spindle headstock fixed, not swivelling. Equipped with new FAGOR CNC control with BEMA cylindrical grinding interface. Featuring a new, service-friendly enclosure. Fully overhauled according to Kellenberger measurement protocol.

Stanje: rabljeno, Leto izdelave: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Machine weight: approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Ppjdpot Ii Nbsfx Agxsr Photo shows a recently completed machine with some optional features. Fanuc 21i control - Grinding head UR 1-2-3 for external/internal/face grinding - B-axis automatic, 1° Hirth serration - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing device KEL-BALANCE - Left grinding wheel mount, 400 mm diameter - Right grinding wheel mount, 300 mm diameter - Internal grinding device with belt drive - Tailstock with micro adjustment - Fine adjustment on swivel table - Paper band filter SBP4, 240l

Stanje: rabljeno, Grinding diameter: 250 mm Grinding length: 600 mm Centre height: 125 mm Grinding wheel diameter: 500 mm Grinding wheel width: 80 (100) mm Bore: 203.2 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: +/- 360° Grinding headstock swivelling: +/- 0° Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: +/- 10° Table longitudinal travel: 700 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported incl. clamping): 130 kg Cross travel: 270 mm Tailstock quill taper: MT3 Quill travel: 30 mm Total power requirement: 5.5–7.5 kW Machine weight approx.: 2.7 t As a world-leading company in Kellenberger overhauls/retrofits, we not only deliver machines in as-new condition with warranty but can also offer comprehensive service for your machines. Overhauled to Kellenberger guidelines, including new, modern, and future-proof control system. Photo shows an already delivered machine. - Operation via touch panel is extremely user-friendly. - The symbols on the control panel are almost identical to the original control, so no retraining is necessary. - Diagnostic function with display of PLC messages and digital I/O. - Dressing function can be upgraded or modified to customer requirements. - Workpiece spindle can be stopped in an oriented position upon request. - Maximum infeed can be increased to 40 mm on customer request. - Digital display in 2 axes. Resolution X-axis: 0.5 µm Options: - Rotary encoder with digital display on workpiece headstock - Rotary encoder with digital display on grinding headstock (no vertical adjustment possible with spindle) - New, stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase centre height up to max. 225 mm - Variable speed control for the grinding spindle Including: - New DGS paper band filter Ppsdpfjd Ih Ehsx Agxor - Operating tools - Clamping tube for chuck Further accessories available on request. The machine is equipped on the X-axis with an electronically controlled infeed system with stepper motor drive. Hydraulic table longitudinal and rapid traverse feed. Versatile use in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Optional features: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control The machine tool does not currently meet the fundamental safety and protection requirements as specified in BetrSichV 2015. A risk assessment as per BetrSichV must be carried out to determine the necessary minimum safety measures.

Stanje: rabljeno, Leto izdelave: 1995, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina konic 175 mm Generalno obnovljeno leta 2013 Ojačano glavno vreteno obdelovanca B-os brezstopenjsko nastavljiva Kontra-vreteno Brez vpenjalne glave in brez lunete na fotografiji Krmiljenje Kelco 90 Ppedoxyadaopfx Agxsr Stroj je možno pri stranki v obratovanju ogledati do vključno januarja 2026.

Stanje: rabljeno, Leto izdelave: 2017, Overview This robotic palletizing system was manufactured in 2017 by the Italian company BEMA. The system is designed for palletizing bag-in-box products (5 l and 19 l) for water and syrup applications. It consists of a robotic palletizing system with Fanuc control, a pallet magazine, and a stretch wrapping machine. The machine was in operation until September 2025 and is currently decommissioned, but still installed on site and disconnected from the power supply. The system is fully functional, immediately available, and can be inspected upon request. Maintenance was carried out twice a year. Technical data Performance: 5 l BIB: 650 BIB/h – 7 pallets/hour 19 l BIB: 420 BIB/h – 13 pallets/hour Formats: 5 l / 19 l bag-in-box Application: Palletizing of water and syrup products Configuration: Robotic palletizer with Fanuc R-30iB system, pallet magazine, stretch wrapper Scope of delivery Pjdpfeyyl S Eox Agxjpr Robotic palletizer | BEMA | FANUC R-30iB | 2017 | robotic palletizing system Stretch wrapper | BEMA | SILKWORM LS | 2017 | pallet stretch wrapping unit Pallet magazine | 2017 | pallet handling system Tool kit | 2017 | 2 tools for 5 l and 19 l BIB

Leto izdelave: 2008, stanje: rabljeno, Packing machine for 10-bottle and 6-bottle cartons for 330 ml disposable bottles, including dating via Videojet printer, year of manufacture 2016 Ppodpfsvcqn Eex Agxor Machine (additional): Full carton packing machine Voltage: 400 V Compressed air: 6 bar Length: 5.4 m Width: 1.15 m Height: 1.95 m Base construction: on feet Equipment: Inkjet dating system (year 2016), hot melt gluing unit Weight: 700 kg