Holzkraft Minimax Fs 52 Es Tersa nakup rabljenega (12.737)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Kombinirana reškalna in žagalna strojnica SCM minimax fs 41e Letnik proizvodnje 2019 Moč pogonskega motorja 5 kW Priključna napetost 400 V Frekvenca omrežja 50 Hz Valj reškalnih nožev, tip TERSA – 4 reškalni noži Število vrtljajev 5200 min⁻¹ Širina reškaljenja največ 410 mm Hitrost podajanja 6 / 12 m/min Priključek za odsesavanje, premer 120 mm Reškaljenje Podajalna miza, dolžina 1034 mm Odstranitev materiala, največ 5 mm Prodszi Nhmepfx Amfoa Dimenzije in teža, dolžina približno 2000 mm Širina/globina približno 1110 mm Višina približno 1115 mm Teža približno 430 kg Sistem reškalnih nožev TERSA omogoča izjemno tih delovanje. Poševno nazobčen jekleni valj za enakomeren in stalen vnos materiala Podajanje materiala z dvema hitrostmi Digitalni prikazovalnik za višino žagalne mize Žagalne mize dolžine 2000 mm omogočajo enostavno obdelavo velikih obdelovancev. Delovne mize so izdelane iz sivega litega železa, žarjene in brez napetosti, zato so odporne in trajno ravne. Stabilna, velika aluminijasta vodilna plošča z okroglimi vodili (1200 x 160 mm) Nastavitev žagalne mize prek ročnega kolesa z digitalnim prikazovalnikom za višino žaganja Visoka teža stroja zagotavlja največjo natančnost in stabilno delovanje Močan industrijski motor Robustna jeklena/litina konstrukcija

Stanje: rabljeno, Leto izdelave: 2023, Rabljen stroj Letnik proizvodnje: 2023 Pjdpfxezk Nn Ao Amfora Stanje: kot nov, stroj ni bil uporabljen Oprema in tehnični podatki: - Število vrtljajev vretena: 3.500 / 6.000 / 8.000 / 10.000 vrt/min - Nagib vretena: 0 do -45° - Uporabna dolžina vretena: 125 mm - Premer vretena: 30 mm - Kazalnik vrtljajev: LED-prikaz na sprednji strani stroja - Največji premer orodja (standard): 240 mm - Največji premer orodja, ki ga je mogoče spustiti: 230 mm - Največji premer orodja za profilno frezanja: 240 mm - Največji premer orodja za čelnično frezanja: 320 mm - Dolžina delovne mize: 1.200 mm - Širina delovne mize: 530 mm - Višina mize: 900 mm - Dolžina drsnega nosilca: 1.200 mm - Širina drsnega nosilca: 360 mm - Višina drsnega nosilca: 142 mm - Premer odvodne cevi: 2 × 120 mm - Moč pogonskega motorja: 5,0 kW - Napetost: 400 V - Frekvenca omrežja: 50 Hz Mere: 1.200 × 2.000 mm Teža: 510 kg Razpoložljivost: kratkoročno Lokacija skladišča: 63934 Röllbach

Stanje: novo, Leto izdelave: 2025, FS 41 Classic Tersa – Surface and Thickness Planer with TERSA Quick-Change Cutterhead System Equipped with a TERSA cutterhead for tool-free, seconds-fast knife changes The TERSA blade system enables exceptionally quiet operation Helically serrated steel feed roller for consistent and even wood feed Extra-long one-piece surfacing tables ensure accurate and easy planing of workpieces Large tilting fence can remain in its set position when opening the surfacing tables Surfacing tables open towards the rear High machine weight guarantees maximum precision and smooth running Powerful industrial motor Durable steel and cast iron construction Model: FS 41 Classic Tersa Article no.: 5503414 Technical Specifications --- Surfacing Specifications --- Total table length: 1800 mm Infeed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. cutting depth: 4 mm --- Thicknessing Specifications --- Thickness table dimensions: 605 x 420 mm Min./Max. working height: 3 / 230 mm Feed speed: 7 m/min Cutterhead diameter / knives: 72 mm / 3 pcs Cutterhead speed: 5200 rpm Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 HP) Extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa Cutterhead System No more adjustment or screwing Knife change in seconds Prodocnxayepfx Amfsa Self-locking Exceptionally quiet operation Safety Features Heavy-duty anti-kickback devices prevent workpiece kickback 3-knife Tersa cutterhead for optimal planed finish Wood Feed System Helically serrated steel feed rollers ensure consistent and even material feed without markings 13 teeth engage simultaneously for powerful feed Maintenance-free, unlike rubber feed rollers Extraction Hose Connection Extraction ports for both surfacing (1) and thicknessing (2) are oriented in the same direction Hose connection accessible from one machine side only No hose routing required around the machine

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, minimax c 26g TERSA – Multi-function combination machine for sawing, milling, planing and thicknessing. The work tables are made from heavily ribbed grey cast iron and the frame is constructed from welded steel, ensuring outstanding torsional rigidity and vibration-free operation. Unique in its class: smooth-running anodised aluminium sliding table with ball contact system. Tilting saw blade from 90° to 45°. Table extension with aluminium crosscut fence for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically-toothed steel infeed roller for constant feed when thickness planing. Radius milling guard for profiling operations, standard with fine adjustment. Milling unit with two speeds. Three independent motors, one for each working unit. Quality Made in Europe. Equipment details Aluminium sliding table With proven ball contact system, used millions of times Dust and dirt-resistant thanks to minimal contact area between ball and trapezoidal rail Permanently smooth-running Saw unit adjustment Manual height and tilt adjustment of the saw unit via handwheel Precise positioning using a scale TERSA planer knife shaft No more setting and screwing Planer knife changes in seconds Self-locking Particularly low-noise Spindle moulder The milling unit features two speeds for flexible tooling options. The machine is equipped with a finely adjustable radius milling guard for profiling. With the aluminium sliding table, tenoning operations are easily possible. Thicknesser With the powerful thicknessing feed, workpieces up to 200 mm height can be planed. The helically toothed infeed roller guarantees consistent material feed. The jointer table folds up space-savingly towards the inside of the machine. Conversion from surface planer to thicknesser is completed within seconds by a single lever. Surface planer Standard with TERSA quick-change planer knife system Large dimensioned planing tables Planing and thicknessing tables made from grey cast iron guarantee maximum smooth running and vibration-free operation. Saw unit Saw tiltable up to 45° With 250 mm diameter saw blade, max. 80 mm cutting height Rip cuts up to 500 mm with parallel fence Table extension With angle scale and aluminium crosscut fence for mitre cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer shaft Anodised aluminium sliding table Mitre fence with flip stop Multi-function fence for rip and surface planing Eccentric clamp arm Model: minimax c 26g TERSA Item no.: 5500027 Cutting length: 1200 mm Cutting width with parallel fence: 500 mm Max. crosscut width left of saw blade: 1200 mm Saw blade tilt: 90 - 45 degrees Max. cutting height at 90°: 80 mm Sliding table length: 1140 mm Sliding table width: 201 mm Sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer shaft type: TERSA Planer shaft diameter: 62 mm Number of planer knives: 3 pcs Jointer table width: 260 mm Jointer table length: 1040 mm Saw/jointer fence tilt angle: 90/45 degrees Max. jointer depth of cut: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Min. working height in thicknesser: 3 mm Location: Ex stock 54634 Bitburg Pjdpfsdqzh Tjx Amfera - immediately available -

Stanje: novo, Leto izdelave: 2026, Holzkraft Minimax ST 5es – Maximum Specification for Professional Use Saw-spindle moulder combination with mitre-cutting device and tilting spindle moulder Item No.: 5501086 Ø 350 mm main saw blade with max. cutting height of 118 mm, achievable even with the scorer blade installed Scoring unit with separate motor and Ø 120 mm blade, easy and precise adjustment from outside Saw unit tiltable from 90° to -45° High-precision sliding table made of anodised aluminium Large outrigger table (1200 x 650 mm) With material roller and extendable aluminium telescopic fence up to 3300 mm Tilting spindle moulder from 90° to -45° backwards into the fence Four spindle speeds Spindle with reversible direction of rotation Three independent motors Equipped with lockable main switch and motor protection switch Standard with separate parallel rip fence and jointer fence for edge jointing Equipment Details: Sliding Table with Ball Contact System Made of anodised aluminium Guides of hardened and ground steel, 15% harder than standard steel Twin-trunnion Spindle Moulder Unit Tiltable, made of grey cast iron Mounting points directly to the table for optimal smooth operation Spindle located high on precision ball bearings for lowest bearing load and maximum service life Powerful industrial motors Spindle Moulder Fence Heavy-duty professional version High-quality grey cast iron fence supplied as standard with fine adjustment 3-positioned stops for quick repeatability Fine adjustment via rack and pinion, numeric display and aluminium fence jaws Rip Fence Prsdpjd Hx Hmefx Amfja With fine adjustment and quick clamping Stable round bar guide made from ground steel Easily foldable for large workpiece cutting Reversible aluminium fence ruler for narrow workpieces Grey Cast Iron Twin-Trunnion Saw Unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Bearing close to saw blade on both sides Height and angle tilting up to 45° Scoring unit with separate 0.55 kW scorer motor as standard Outrigger with angle-adjustable telescopic crosscut fence with mitre scale Dimensions & Weights Approx. weight 900 kg Dust Extraction Connection Extraction port diameter 3 x 120 mm Extraction port diameter blade guard 80 mm Drive Power Scorer Motor 0.55 kW Main Motors 2 x 5.0 kW Electrical Data Voltage 400 V Sliding Table and Table Sliding table width 360 mm Sliding table height 142 mm Table length 1380 mm Table width 465 mm Spindle Moulder Spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Max. Cutter Diameter lowerable 240 mm Tenoning 320 mm Panel Saw Unit and Scorer Cutting length 3200 mm Cutting width with rip fence 900 mm Max. crosscut width left of blade 3300 mm Saw blade tilt 90 – 45° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, 4-knife cutter block for optimal planing results Smooth operation thanks to precision unit and robust cast iron construction Front steel infeed roller with helical serration for optimal feed Satin-finished steel outfeed roller, optionally with rubber roller in outfeed Work table mounted on four large columns for maximum stability under all working conditions Thickness table adjustment via handwheel with numeric height indicator (precise to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator side High-power industrial motor Stable welded steel and grey cast iron construction Equipment Details: Work Table Mounted on four oversized spindles for maximum stability in all working conditions Predpfxod Hx Hno Amfsa Special lifting device ensures table position remains secure even without locking Tersa Cutter Block No more adjustment or bolting required Knife change in seconds Self-locking Exceptionally quiet Thickness Table Adjustment on S 41 elite s Via handwheel with numeric indicator, precise to 0.1 mm Dimensions and Weights Length: approx. 900 mm Width/Depth: approx. 1070 mm Weight: approx. 361 kg Dust Extraction Connection Extraction port diameter (thicknessing): 120 mm Drive Power Main motor: 5 kW Setup Information Required length: 1070 mm Required width/depth: 900 mm Required height: 1100 mm Space requirement explanation: Dimensions include maximum movement paths or working lengths. Machine body length: 1040 mm Machine body width/depth: 900 mm Length: 3000 mm Width: 1600 mm Working area explanation: Please add these dimensions to the space requirement to determine the recommended clear installation area for the machine. Thicknessing Table Thicknessing table length: 423 mm Thicknessing table width: 775 mm Work height min.: 3 mm Work height max.: 240 mm Min. work length: 180 mm Max. material removal: 5 mm Electrical Data Supply voltage: 400 V Cutter Block Type: TERSA Diameter: 95 mm Number of knives: 4 pcs. Speed: 5000 rpm Max. planing width: 410 mm Feed Speed: 6/12 m/min

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, minimax ti 55es LL - Spindle Moulder Image shows T 55 i elite s standard version The professional joiner's machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting Stable steel/cast iron construction Large-dimension spindle unit made from cast iron, tiltable up to -45° to the rear Spindle speeds displayed via LEDs Quick and easy speed change thanks to eccentric clamp Reversible spindle rotation (clockwise/counter-clockwise) Height and tilt indication accurate to 0.1 mm Heavy-duty professional fence: fine adjustment via rack-and-pinion, digital readout, aluminum fence jaws, 3-position settings for fast repeatability Scope of delivery: Aluminum fence jaws Curved guard Table extension left and right Model: minimax ti 55es LL Article No.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Sliding table size: Useful spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilt: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400 V/50 Hz/S6-40%: 5.0 kW Prjdjdqzh Rjpfx Amfsa Extraction port diameter: 2 x 120 mm

Stanje: novo, Leto izdelave: 2026, For sawing, milling, surface and thickness planing, and optionally mortising, in the smallest of spaces High-precision sliding table made of anodized aluminum, various lengths available Large outrigger (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional flip stops Max. saw blade diameter 315 mm, tiltable from 90° to -45° Large spindle moulder swivel range from 90° to -45° to the rear Four spindle speeds up to 10,000 rpm, manually adjustable With spindle moulder reverse operation Strongly ribbed surface planing tables made of stress-relieved cast iron for decades of stability and flatness Two-speed feed for thickness planing Three independent industrial motors for continuous operation With lockable main switch and motor protection switch Fixed handwheels Dimensions and weights Weight (net) approx. 857 kg Surface planer Surface table width: 410 mm Surface table length: 2000 mm Max. planing depth, surface: 5 mm Extraction connection Extraction port diameter: 3 x 120 mm Saw blade guard extraction port diameter: 60 mm Installation information Space requirement length: 5960 mm Space requirement width/depth: 5140 mm Space requirement explanation: Dimensions consider maximum travel or working length. Working area length: 1600 mm Working area width/depth: 1600 mm Working area explanation: Please add specified dimensions to the space requirement to obtain the recommended installation area for the machine. Thickness planer Thickness table length: 757 mm Thickness table width: 423 mm Working thickness min.: 3 mm Working thickness max.: 230 mm Max. planing depth, thickness: 5 mm Electrical data Connection voltage: 400 V Line frequency: 50 Hz Rated operation mode drive motor: S6 Duty cycle drive motor: 40% Power output drive motor: 3 x 5.0 kW Sliding table and worktable Sliding table length: 2660 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 1250 mm Worktable width: 430 mm Worktable height: 900 mm Spindle moulder Spindle tilt: 0 to -45° Spindle shaft diameter: 30 mm Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Max. milling tool diameter: Max. tool diameter, retractable: 210 mm Max. tool diameter, retractable at 45°: 150 mm Max. tool diameter, tenoning: 275 mm Cutterhead Cutterhead type: TERSA Cutterhead diameter: 87 mm Number of knives: 4 Cutterhead speed: 5200 rpm Panel saw unit Rip length: 2600 mm Cutting width with parallel fence: 900 mm Max. crosscut width left of blade: 3260 mm Saw blade tilt: 90–45° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Max. saw blade projection 90°: 100 mm Pedpfx Amoih Dxljfjra Max. saw blade projection 45°: 71 mm (Main) saw blade diameter: 315 mm (Main) saw blade diameter explanation: with scoring blade (Main) saw blade speed: 4000 rpm Feed Feed speed: 6–12 m/min Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, - Robust steel and cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds - Motorized thicknessing table lift with two speeds and digital display - Segmented pressure bar at the infeed - Precision-mounted four-knife cutterblock - Helical-toothed steel infeed roller for particularly even and gentle wood feed - Outfeed roller with rubber coating - Large jointer fence, tiltable 90 to +45° - Auxiliary fence included as standard - Powerful industrial motor - Pneumatic quick-change system with pneumatic lifting and lowering of the jointer table - The extraction connection point remains the same for both jointing and thicknessing operations, eliminating the need for additional extraction hoses or complicated changeovers around the machine This item comes with a 3-year Stürmer warranty upon online registration. Warranty only applicable to end customers in Germany and Austria. Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Length (product): approx. 2300 mm - Width/Depth (product): approx. 1100 mm - Weight (net): approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Jointer table width: 520 mm - Working height: 930 mm - Max. depth of cut (jointer): 6 mm - Jointer fence length: 1200 mm Psdpou T Hq Sofx Amfora - Jointer fence height: 190 mm - Jointer fence tilting range: 90 – 45° Extraction Connection: - Extraction port diameter (thicknesser): 120 mm Installation Information: - Space required (length): 2300 mm - Space required (width/depth): 1610 mm - Explanation of space requirement: Dimensions include maximum travel paths or usable lengths. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Working area note: Add these dimensions to the space requirement to determine the recommended free installation space for the machine. Thicknesser: - Thicknessing table width: 520 mm - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. depth of cut (thicknesser): 8 mm Electrical Data: - Motor power: 7 kW - Supply voltage: 400 V - Network frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 pcs - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2023, moč: 7 kW (9,52 KM), širina skobljanja: 520 mm, število rezil: 4, skupna masa: 483 kg, vrsta nastavitve višine: električni, premer gredi skobeljnika: 120 mm, višina skobljanja: 240 mm, SCM MiniMax s 52es Thickness Planer Specification: • Condition: New • Manufacturer: SCM • Planer table width: 520 mm • Planer table length: 850 mm • Minimum workpiece thickness: 3 mm • Maximum workpiece thickness: 240 mm • Maximum cutting depth: 5 mm • Motor power: 7 kW • Supply voltage: 400 V • Cutterblock: 4 conventional knives • Cutterblock diameter: 120 mm • Cutterblock speed: 5000 rpm Podpsqu U Dnsfx Amfora • Maximum planing width: 520 mm • Feed speed: 5 / 8 / 12 / 18 m/min • Extraction port diameter: 120 mm • Weight (net): approx. 493 kg • Overall dimensions: 144 x 108 x 110 cm (W x L x H) Additional Information: • Factory new machine • Actual item condition shown in the pictures • Possibility to test and inspect the machine on-site • Price listed in the auction does not include VAT or transport costs • Available immediately from stock in Italy

Stanje: novo, - NEW - - With TERSA cutterhead for changing planer blades in seconds - TERSA planer knife system ensures particularly quiet operation - Helically grooved steel feed roller for consistent and even wood feed - Exceptionally long, one-piece surfacing tables enable easy dressing of workpieces - Large planer fence remains in position when surfacing tables are opened - Surfacing tables open to the rear - High machine weight ensures maximum precision and smooth running - Powerful industrial motor - Robust steel/cast iron construction - Work tables are made of cast iron, annealed and stress-relieved, making them dimensionally stable and permanently flat - Table lips for quiet operation Features TERSA Cutterhead - No more setting or screwing - Change planer blades in seconds - Self-locking - Particularly quiet - Perfect planing results Chip Extraction Hose Connection - Extraction ports for surfacer and thicknesser are oriented in the same direction - Hose connection from one side only - No hose required to wrap around the machine Drive System - Sturdy chain drive - Drive wheels made of steel - Solid cast iron bearing pedestal Planing Unit - Massive anti-kickback fingers prevent kickback of workpieces - TERSA cutterhead with three knives ensures optimum planing finish Material Feed - Helically grooved steel infeed rollers for consistent and even material feed without marks - Multiple teeth engage simultaneously for powerful feed - Wear-free compared to rubber feed rollers Technical Data: Length approx. 1,725 mm Width/Depth approx. 880 mm Weight approx. 270 kg Max. surfacing depth 4 mm Extraction port diameter (thicknesser) 2 x 120 mm Min. working height (thicknesser) 3 mm Max. working height (thicknesser) 230 mm Max. thicknessing depth 4 mm Drive motor power 4 kW Podpevwgaajfx Amfsra Connection voltage 400 V Mains frequency 50 Hz Cutterhead type TERSA Number of planer knives 3 pcs. Speed 5,200 rpm Max. planing width 300 mm Feed speed 7 m/min Item No. 5503031 Stock location: 97447 Gerolzhofen - ex works, loaded free of charge -

Stanje: novo, - NEW - Description Equipped with TERSA cutterhead for lightning-fast planer knife changes The TERSA planer knife system ensures exceptionally quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed Extra-long one-piece surfacing tables enable effortless processing of workpieces Large surfacing fence remains in position when opening the surfacing tables Surfacing tables open to the rear The substantial machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction. Tables made of annealed and stress-relieved cast iron, making them resistant and permanently flat Table lips for quiet operation Equipment details: TERSA cutterhead No adjusting or screwing required Planer knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Extraction hose connection The extraction ports for surfacing and thicknessing face the same direction. The hose connection is made from only one side. No hose needs to be looped around the machine. Drive Sturdy chain drive Drive wheels made of steel Solid cast iron bearing block Planing unit Heavy-duty kickback protections prevent workpiece kickback TERSA cutterhead with three knives ensures optimal planing surface Material feed Helically toothed steel infeed rollers for continuous and even material feed without marking Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Technical data: Dimensions and weights Length (product) approx. 2015 mm Weight (net) approx. 330 kg Width/depth (product) approx. 990 mm Drive power Drive motor power 5 kW Surfacer Total table length 1800 mm Max. cutting depth, surfacer 4 mm Working height 900 mm Extraction connection Extraction port diameter, thicknesser 2 x 120 mm Setup information Required installation length 2015 mm Machine body width/depth 596 mm Required width/depth 1460 mm Working area length 1000 mm Notes on required space Dimensions include maximum travel or effective lengths. Working area width/depth 3500 mm Machine body length 659 mm Notes on working area Add the listed measurements to the required space to obtain the recommended free space for the machine. Thicknesser Thicknessing table length 605 mm Max. working height, thicknesser 230 mm Thicknessing table width 420 mm Max. cutting depth, thicknesser 4 mm Min. working height, thicknesser 3 mm Electrical data Connection voltage 400 V Current type AC Phases 3 Ph Network frequency 50 Hz Planer cutterhead Cutterhead type TERSA Cutterhead speed 5200 min¯¹ Cutterhead diameter 72 mm Max. planing width 410 mm Number of knives 3 pcs Feed Feed speed 7 m/min Included in delivery Podpfx Amsvwga Hsfora TERSA cutterhead Anodised aluminium surfacing fence No. 550 3414

Stanje: novo, - New - Description: - For sawing, milling, surface planing, thickness planing, and optionally mortising - Work tables made of heavily ribbed cast iron and frame made of welded steel ensure torsional stiffness and vibration-free operation - Unique in this performance class: smooth-running anodized aluminum sliding table with ball contact system Prodpfxjvwf Enj Amfea - Saw blade tiltable from 90° - 45° - Table extension with angle scale and aluminum crosscut fence for mitre cuts on panels and large workpieces - Planer unit equipped with TERSA quick-change system with three planer knives - Spiral-toothed steel feed roller for consistent workpiece feed during thickness planing - Curved milling guard hood for profiling, standard with fine adjustment - Milling unit with two speeds - Power transmission for the units via three independent motors - Quality Made in Italy Technical Data: Dimensions and Weight Net weight approx. 245 kg Surface Planer Planer table width 300 mm Planer table length 1200 mm Saw/Planer fence tilt angle 90/45° Max. surface planing depth 3 mm Extraction Connection Extraction port diameter 4 x 120 mm Extraction port diameter for saw blade guard 60 mm Installation Information Required space length 2460 mm Required space width/depth 2155 mm Remarks on space requirement: Dimensions reflect maximum travel range or working length. Thickness Planer Thickness table length 450 mm Thickness table width 300 mm Min. working height 3 mm Max. working height 200 mm Max. thicknessing depth of cut 3 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Rated duty cycle drive motor S6 Duty cycle drive motor 40 % Drive motor power 3 x 1.8 kW Sliding Table and Table Sliding table length 1140 mm Sliding table width 201 mm Sliding table height 70 mm Table length 1024 mm Table width 224 mm Table height 900 mm Spindle Moulder Spindle tilt 0° Spindle shaft diameter 30 mm Usable spindle height 75 mm Spindle speeds 5000 – 7500 rpm Max. Cutter Diameter Max. cutter diameter 160 mm Max. lowerable cutter diameter 180 mm Max. tenoning cutter diameter 275 mm Planer Knife Shaft Planer shaft type TERSA Planer shaft diameter 62 mm Number of planer knives 3 pcs Circular Saw Unit Edging length 1200 mm Cutting width with rip fence 540 mm Max. crosscut width left of blade 1200 mm Saw blade tilt 90 - 45° Max. cutting height at 90° 67 mm Max. cutting height at 45° 40 mm Max. saw blade projection 90° 75 mm Max. saw blade projection 45° 60 mm Feed Feed speed 6 m/min Scope of Delivery: - Tersa quick-change planer knife shaft - Anodized aluminum sliding table - Multifunction fence for rip and surface planing - Table extension with crosscut fence and fence jaw - Eccentric clamping arm Item No.: 5500030

Stanje: novo, Description Surface and Thickness Planer with TERSA Quick-Change Cutter System - Equipped with TERSA cutter block for lightning-fast knife changes - TERSA cutter system ensures particularly quiet operation - Helically toothed steel infeed roller for consistent and even feed of timber - Exceptionally long, one-piece surfacing tables for easy planing of workpieces - Large planing fence remains in position when opening the surfacing tables - Surfacing tables open towards the rear - High machine weight ensures maximum precision and smooth running - Powerful industrial motor - Robust steel/cast iron construction Special Features - Work tables made of stress-relieved cast iron, guaranteeing lasting flatness and high resistance to distortion - Table lips ensure silent operation Equipment Details TERSA Cutter Block - No more adjustments or screwing required - Knife replacement in seconds - Self-locking - Exceptionally quiet - Perfect planing result Extraction Hose Connection - Both surfacing and thicknessing extraction ports face the same direction - Hose connects from one side only; no need for a hose to run around the machine Drive System - Rugged chain drive - Drive wheels made of steel - Heavy-duty cast iron bearing mounts Planing Mechanism - Heavy anti-kickback fingers prevent workpiece kickback - 3-knife TERSA cutter block ensures optimal planing finish Material Feed - Helically serrated steel feed rollers guarantee a consistent, even material feed with no impressions - Multiple teeth engage simultaneously for powerful feed - Wear-free compared to rubber feed rollers Technical Data Surfacing table overall length: 1510 mm Surfacing working width: 300 mm Surfacing depth of cut, max: 4 mm Thicknessing table dimensions: 565 x 300 mm Thicknessing working height, min: 3 mm Thicknessing working height, max: 230 mm Thicknesser feed speed: 7 m/min Cutter block speed: 5200 rpm Cutter block diameter: 72 mm Number of knives: 3 pcs. Electrical connection: 400 V Motor power: 4.0 kW Extraction port diameter: 2 x 120 mm Weight: 270 kg Long-hole mortising unit (optional): Table size 470 x 220 mm Pedpfx Amou Diwlsfsra Long-hole mortising unit travel, cross/longitudinal: 160 mm / 110 mm Long-hole mortising unit vertical travel: 120 mm Scope of Delivery & Equipment - TERSA cutter block - Anodized aluminium planing fence

Stanje: novo, - Large jointer tables made of grey cast iron - The table adjustment operates via a precise parallelogram system, ensuring that the distance between the table edges and the cutterhead remains constant in every position - The large, stable fence made of anodized aluminum is easy to move and tiltable from 0° to 45° - Fence tilt is visible from the operator’s working position - Supplied as standard with auxiliary fence - Large, four-knife precision-cutterhead - Smooth operation thanks to precision unit and heavy cast construction - High-performance industrial motor - Maximum operator safety with extremely simple operation - Planing depth display via graduated scale - Manual table adjustment - Motor protection switch Equipment details - Includes fold-away auxiliary fence for narrow workpieces - Manual quick adjustment of planing depth with graduated scale & clamping knob The safety guard - The safety guard is foldable and has been designed so that it does not hinder the operator while providing protection during operation TERSA models with Tersa cutterhead system - No more adjustment and screwing - Blade change in seconds - Self-locking - Extremely quiet operation - Perfect planing results This product comes with a 3-year Stürmer warranty upon online registration. Warranty applies only to end customers in Germany and Austria. Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 2750 mm - Width/depth (product) approx.: 1500 mm - Weight (net) approx.: 680 kg Jointer: - Total table length: 2720 mm - Infeed table length: 1498 mm - Max. planing depth: 8 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt range: 90 – 45° Extraction connection: - Extraction port diameter (thicknesser): 120 mm Installation requirements: - Required installation length: 2750 mm - Required installation width/depth: 1604 mm - Installation notes: Maximum travel or usable length considered in dimensions. Electrical data: - Main drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Cutterhead: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 pcs Prsdpfx Amju T Hrcsfsa - Cutterhead speed: 5000 rpm - Max. planing width: 520 mm

Stanje: rabljeno, Leto izdelave: 2022, Used machine Year of manufacture: 2022 Features and technical specifications: - Professional panel saw in heavy-duty construction - With scoring unit; externally adjustable with separate drive motor - Sliding table made of anodized aluminum with proven and permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from date of initial commissioning) - Saw rip fence with round bar guide; foldable for large panels, with quick clamping and integrated fine adjustment - Table extension - Table widening - With integrated on/off switch on the sliding table - With motorized height and tilt adjustment of the saw unit, digital display for tilt - Programmed control of saw blade height, tilt, and rip fence position - Swiveling control panel at eye level - Quality Made in Italy - Maximum cutting length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Crosscut capacity to the left of the saw blade max.: 3260 mm - Cutting width with rip fence: 1270 mm - Saw blade tilt: 90 - 45 ° - Saw blade diameter with scorer max.: 400 mm - Scoring blade diameter: 120 mm - Main saw blade speed: 3500/5000 rpm - Scoring blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction port: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Scoring unit motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Prodpfx Amszlbq Ssfja Availability: short-term Location: Röllbach

Stanje: novo, Leto izdelave: 2026, Maximum specification for professional users. Multi-function combination machine with TERSA cutterblock, mitre cutting unit, and tilting spindle moulder. Ø 350 mm main saw blade with 118 mm maximum cutting height, even with scoring blade installed. Scoring unit with separate motor and Ø 120 mm saw blade, easily adjustable from outside. High-precision sliding table made of anodised aluminium on hardened and polished steel guide rails. Large outrigger table (1200 x 650 mm) with roller and extendable aluminium telescopic fence up to 3300 mm. Saw aggregate tilts from 90° to -45°. Tilting spindle moulder from 90° to -45° towards the fence. Four spindle speeds. Spindle moulder with reversible rotation direction. Quick conversion to thicknesser thanks to parallely opening surface tables. 2-speed feed on thicknessing table. Helical-toothed steel infeed roller for consistent wood feed. Three independent industrial motors. Includes separate rip fence and separate jointer fence. Equipped with lockable main switch. Equipment details: Crosscut fence Immediate control Outrigger table Outrigger with angle-adjustable telescopic crosscut fence with degree scale. Sliding table with ball contact system Made of anodised aluminium Guides made of hardened and ground F550S steel, 15% harder than conventional steel Guides are riveted, not glued Smooth-running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guideways Cast iron dual trunnion saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to saw blade, supported on both sides Height and tilt adjustable up to 45° Scoring unit with separate 0.55 kW scoring motor as standard Dual trunnion spindle moulder unit Large dimensioned, tilting cast iron dual trunnion spindle moulder unit Spindle fence Heavy-duty professional version The high-quality spindle fence made of cast iron is supplied with fine adjustment as standard 3-position for quick recall of settings Fine adjustment via rack and pinion, numeric display and aluminium fence jaws Planer section Helical-toothed steel infeed rollers ensure consistent wood feed Massive anti-kickback devices prevent workpiece kickback 4-knife Tersa cutterblock for optimal planing results Table lips ensure quieter operation Tersa planer cutterblock No more setting or screwing Knife change in seconds Self-locking Extremely quiet operation Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, guaranteeing maximum stability under all working conditions Special lifting device ensures table position is maintained precisely, even without locking Prsdpecnxa Ssfx Amfea Parallel fence With fine adjustment and quick clamping Stable round bar guide made of ground steel Reversible aluminium fence ruler No gap in measurement, guide bars are overlapping Separate surface fence Large professional design (1800 x 150 mm) Tiltable 0-45° With quick adjustment Stable round bar guide made of ground steel Simultaneous opening Art. no.: 5500557

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 5 h, moč: 5 kW (6,80 KM), vhodna napetost: 400 V, vrtilni razpon: 45 °, največja hitrost vrtenja: 10.000 obr/min, vrtljajska hitrost (min.): 3.500 obr/min, širina mize: 530 mm, dolžina mize: 1.200 mm, skupna masa: 510 kg, premer orodja: 240 mm, Oprema: CE označba, Professionelle macchina per artigiani con mandrino fresa orientabile e braccio esteso. Macchina da esposizione come nuova – utilizzata solo per dimostrazioni Unità di fresatura in ghisa, inclinabile all'indietro fino a -45° Quattro velocità di fresatura da 3500 a 10000 giri/min Rotazione destra/sinistra Indicatore di altezza e inclinazione con precisione di 1/10 mm Cambio rapido della velocità tramite serraggio eccentrico Potente motore industriale da 5,0 kW Cuffia di protezione per fresatura curva inclusa nella fornitura Prodotto in Italia Inclinazione mandrino fresa 0 – -45° Lunghezza utile del mandrino 125 mm Velocità mandrino 3500/6000/8000/10000 giri/min (display LED sulla parte frontale della macchina) Diametro mandrino 30 mm Diametro utensile max. 240 mm Diametro utensile massimo abbassabile 230 mm Diametro utensile massimo per tenonatura 320 mm Accessori inclusi: Pedpfx Ajyn Ny Ujmfsra Guida per tagli obliqui con due battute ribaltabili Serraggio eccentrico Cuffia di protezione per fresatura curva Inoltre: ganasce del sistema di battuta regolabili La macchina può essere visionata e testata in qualsiasi momento presso la sede di Chemnitz.

Stanje: novo, Leto izdelave: 2025, Gluing unit: Yes Edge thickness: up to 3 mm Workpiece thickness: from 8 mm to 50 mm Minimum workpiece width: 110 mm Glue pot: Granulate, quick-change pot Prjdpsk Eai Uofx Amfsa End trimming unit: Yes End trimming / flush cutting: Yes Milling station: Chamfer / Radius Corner copying: Yes Flat scraper: Yes Radius scraper: Yes Buffing unit: Yes Anti-adhesive spray unit: Yes Infeed fence adjustment: Manual Workpiece thickness adjustment: Manual Power consumption: 5 kW Machine length: 3314 mm Machine width: 1085 mm Weight: 545 kg

Stanje: novo, Leto izdelave: 2026, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Jointing table length: 2300 mm Tiltable fence: yes Jointing tables lift: pneumatic Maximum planing thickness (thickness planer): 250 mm Prodpfxjiuldyo Amfea Thickness table height adjustment: electric Planing thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: segmented Table rollers: no Motor power: 7 kW Motor brake: yes, automatic Extraction port: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 980 kg

Stanje: novo, Leto izdelave: 2025, Woodworking machinesSliding Table Spindle Moulder Minimax twf55 es Item number: 5502261 Robust steel and cast iron construction Anodised aluminium format sliding table Large-scale spindle unit made of cast iron, tiltable backwards up to -45° Four spindle speeds from 3500 to 10000 rpm Clockwise and counterclockwise rotation standard Height and tilt display precise to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress-relieved and annealed for permanent precision Powerful 5.0 kW industrial motor Curved section hood included Made in Italy Dimensions and Weights Length (Product) approx. 1200 mm Width/Depth (Product) approx. 2000 mm Weight (Net) approx. 510 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1200 mm Predji Dphtjpfx Amfsa Table width: 530 mm Table height: 900 mm Sliding table length: 1200 mm Sliding table width: 360 mm Sliding table height: 142 mm Setup Information Required Space Length: 2800 mm Required Space Width/Depth: 2910 mm Space Requirement Note: Dimensions account for maximum travel paths or usable lengths. Machine body length: 1200 mm Machine body width/depth: 846 mm Working area length: 1600 mm Working area width/depth: 2300 mm Working area note: Please add the specified dimensions to the required space to determine the recommended free installation area for the machine. Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Motor output: 5.0 kW Spindle Spindle tilting: 0 to -45° Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Spindle speed display: LED at machine front Spindle shaft diameter: 30 mm Max. Tool Diameter Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tool diameter for profile milling: 240 mm Max. tool diameter for tenoning: 320 mm EQUIPMENT Features Aluminium sliding table: ✔ Spindle fence: Heavy-duty professional design with hold-down, safety cover and aluminium spindle fence jaws Telescopic mitre fence: with two flip stops Extension table: ✔ Curved section safety hood: ✔ Eccentric clamp: ✔ Handle on sliding table: ✔ Manual spindle height adjustment Manual spindle tilt adjustment Control: Manual height and tilt adjustment of the spindle unit Control elements location: On machine body Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Spindle Moulder minimax twf 55 es M 3 UP Professional woodworking machine featuring motorized spindle height and tilt adjustment, four speeds, and electronic control system. Article Number: 5502266 Brand: Holzkraft / SCM EQUIPMENT Equipment: Aluminium sliding table ✔ Handle on sliding table ✔ Fence: FLEX ONE: Heavy-duty professional version, automatic adjustment of the entire fence based on tool diameter, manual chip removal adjustment, swiveling device, aluminum fence jaws with connecting strips Spindle height adjustment: Motorized Pjdpfx Amohp Rc Iefjra Telescopic mitre fence: With two flip stops Spindle tilt adjustment: Motorized Outrigger table: ✔ Control system: Ready 3: Programmed spindle unit movement in two axes, automatic fence adjustment based on tool diameter, stepless adjustment via switch or automatic positioning system Curved workpiece guard ✔ Control element position: Pivoting control panel at eye level Eccentric clamp TECHNICAL DATA Dimensions and Weights: Length (product) approx.: 1200 mm Net weight approx.: 510 kg Width/Depth (product) approx.: 2000 mm Extraction Connection: Extraction port diameter: 2 x 120 mm Worktable: Table length: 1200 mm Sliding table length: 1200 mm Table width: 530 mm Sliding table width: 360 mm Table height: 900 mm Sliding table height: 142 mm Installation Information: Space required (length): 2800 mm Machine body width/depth: 846 mm Space required (width/depth): 2910 mm Working area (length): 1600 mm Note on space requirement: Dimensions take into account maximum travel or usable lengths. Working area (width/depth): 2300 mm Machine body length: 1200 mm Note on working area: Please add the specified dimensions to the space requirement to obtain the recommended installation area for the machine. Electrical Data: Connection voltage: 400V Main motor power: 5.0 kW Mains frequency: 50 Hz Spindle: Spindle tilt: 0 to -45° Spindle speed display: Shown on control display Usable spindle length: 125 mm Spindle shaft diameter: 30 mm Spindle speeds: 3500/6000/8000/10000 rpm Cutter Head Diameter Maximum: Max. tool diameter: 240 mm Max. tool diameter (profile milling): 240 mm Max. tool diameter (retractable): 230 mm

Stanje: novo, Leto izdelave: 2026, LAB 300 PLUS F 16 TERSA - Universal Combination Machine with Aluminum Sliding Table and Three Milling Speeds for sawing, milling, surface & thickness planing, and optional slot mortising Torsion-resistant steel and cast-iron frame Machine table made of cast iron, hardened and ground Smooth-running, anodized aluminum sliding table, 10-year warranty on guideways against wear Large crosscut table with extendable aluminum telescopic fence and flip stops Combination saw mitre fence with 45° quick adjustment Max. saw blade diameter 315 mm with optional scoring unit, tiltable from 90° to 45° Helical steel feed roller for uniform timber feed during thickness planing Four manually adjustable spindle speeds Standard reversible spindle rotation (clockwise and counterclockwise) Three independent motors for each operating unit Scope of delivery: Combination planing/parallel fence Curved guard hood for spindle moulder Tersa cutter block Anodized aluminium sliding table Aluminum fence jaws Flip stops Eccentric hold-down arm Model: LAB 300 PLUS F 16 Tersa Article No.: 5500314 Technical Data ---Circular Saw--- Cutting length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Pjdpfx Amjcnxa Nsfora Max. crosscut width left of blade: 1660 mm Rip capacity at fence: 800 mm Saw spindle speed: 3500 rpm Saw blade tilt: 90° - 45° ---Surface Planer--- Working width: 300 mm Planer table length: 1260 mm Cutter block diameter / Number of knives: 72 mm / 3 pcs. ---Thickness Planer--- Table dimensions: 300 x 450 mm Min./max. working height: 3 mm / 220 mm Max. depth of cut: 4 mm Feed speed: 7 m/min ---Spindle Moulder--- Usable spindle length: 100 mm Max. tool diameter, retractable: 180 mm Max. tenoning tool diameter: 275 mm Max. retractable tool diameter: 140 mm Spindle speeds: 3500/6000/8000 rpm Spindle diameter: 30 mm Motor output 400 V / 50 Hz / S6 - 40%: 4 kW (5.5 HP) S6 40% Weight: 430 kg Extraction port diameter: 4 x 120 mm Saw blade guard extraction port diameter: 60 mm Sliding Table with Ball Contact System Equipped with a proven ball contact system used millions of times Permanently smooth operation through hardened and ground guideways Not sensitive to dust and dirt due to minimal contact points between ball and rail 10-year Holzkraft warranty against wear on carbide guideways Extraction Hose Connection The extraction ports for the surface planer (1) and thickness planer (2) are aligned in the same direction. Therefore, the extraction hose can be attached from the same side for both planing operations. No need for a hose to go around the machine. Planer Units Helical steel feed rollers for continuous and uniform timber feed Heavy-duty anti-kickback fingers prevent material kickback 3-knife cutter block ensures optimum planed finish

Stanje: novo, Leto izdelave: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder, and format sliding table made from anodized aluminium Robust steel and cast iron construction Large support surface and precision-cast table High-precision format sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with aluminium telescopic fence extendable up to 2660 mm with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° - 45° Saw rip fence with fine adjustment Sturdy saw unit and large double trunnion spindle moulder unit ensures maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-free cast iron Three manually adjustable spindle speeds from 3500 - 10000 rpm With forward and reverse spindle rotation Standard arc milling guard Safety reversing aluminium fence jaws Two motors with high power reserves Two removable handwheels for convenient and quick operation Dimensions and Weights Weight approx. 470 kg Dust Extraction Connection Dust extraction port diameter 2 x 120 mm Saw blade guard dust extraction port diameter 60 mm Electrical Data Drive motor power 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Spindle Moulder Spindle tilt 0 – -45 ° Usable spindle length 100 mm Spindle speeds 3500/7000/10000 rpm Max. cutter diameter not retractable 210 mm retractable 180 mm tenoning 275 mm Circular Saw Unit Crosscut length 1600 mm Cut width with rip fence 900 mm Max. crosscut width left of saw blade 2660 mm Saw blade tilt 90–45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade projection 90° 100 mm Prsdpfxshp Rdlj Amfea Max. saw blade projection 45° 78 mm Main saw blade diameter 315 mm Main saw blade diameter explanation independent of scoring unit Main saw blade speed 4000 rpm Sliding Table and Table Table length 1112 mm Table width 430 mm Scope of Delivery: Arc milling guard Anodized aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces Pedpfxohp Rcrj Amfora TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Max. lowerable tool diameter: 180 mm SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Extendable workpiece support