Hesse By Durma Hd-Fn 6020 nakup rabljenega (15.456)

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Pgedpfxoypbqbj Agxsk Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Pgjdsypbp Djpfx Agxjk Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: rabljeno, Leto izdelave: 2023, Condition: used Year of manufacture: 2023 Stock number: 8285 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €33,900 In stock: 1 unit Pressing force: 30 tonnes Bending length: 1,050 mm Axes: 3 (Y1, Y2, X) Stroke: 160 mm Pjdpfx Aewirnfjgxjgk Distance between frames: 850 mm Throat depth (side stand): 250 mm Installation height: 390 mm Drive system: hydraulic Working speed Y-axis: 10 mm/s Return speed Y-axis: 130 mm/s Backgauge travel X-axis: 495 mm Backgauge speed X-axis: 250 mm/s Table height: 835 mm Table width: 104 mm Oil tank: 75 l Motor power: 7.5 kW Length: 2,470 mm Width: 1,250 mm Height: 2,245 mm Weight: 3,250 kg Demo machine / as new condition Net price (new price: €41,200) 3 axes (Y1, Y2, and X axis) CNC control DT-10 incl. PC software - 10” 2D graphic display - Intuitive touchscreen operation (easy contour drawing with finger) - Direct programming of bend angle - User-friendly dialogue-based programming - Graphic simulation of the bending process - Automatic calculation of developed length for sheet metal blank - Graphic product and tool memory - Correction options - Manual, semi-automatic, and fully automatic operating modes - Tonnage calculation/programming via CNC - Internal data storage - USB ports for backup and program export Motorized backgauge with linear guideways and ball screw spindles Intermediate pieces for upper tool clamping Sheet support arms Side safety guards Equipment compliant with CE regulations Operating manual in GERMAN or ENGLISH OPTION: DBend, 3D CAD/CAM import and simulation software (step, iges and dxf file import) €2,110,-

Stanje: novo, Condition: New Delivery time: Approx. 12–14 weeks from order Country of origin: Turkey Price: €76,820 Leasing rate: €1,451.90 Pressing force: 160 tons Bending length: 4,050 mm Axes: Y1 / Y2 and X axis Stroke: 200 mm Distance between uprights: 3,600 mm Throat depth: 300 mm (side frame) Installation height: 430 mm Drive concept: Hydraulic Rapid traverse speed Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Backgauge travel X-axis: 620 mm Backgauge speed X-axis: 250 mm/s Table height: 858 mm Table width: 104 mm Motor power: 15 kW Length: 4,850 mm Width: 1,900 mm Height: 2,610 mm Weight: 10,500 kg 3 axes (Y1, Y2 and X axis) CNC CONTROL DT-10: - 10" 2D graphical display - Intuitive touch-screen operation (easy drawing of the bending contour by finger) - User-friendly dialogue-based programming - Automatic calculation of bending sequences - Automatic calculation of flat length for sheet metal blank - Graphical product and tool memory - Correction options - USB ports for backup and program transfer - PC software allows programs to be written on a PC and then transferred to the machine by USB CNC-controlled backgauge with linear guides and ball screw spindles CNC-controlled crowning Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radii hardened and ground Fiessler AKAS laser safety device mounted on upper beam Sheet support arms Side and rear safety guards Equipment compliant with CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model thanks to serial production of standardized models without any compromise on quality and accuracy OPTIONAL: CNC-controlled R-axis (X adjustment range = 500 mm) DBend, 3D CAD/CAM import and simulation software (supports step, iges and dxf file import) Pgedpfx Ajwird Hegxjk WE HAVE MORE THAN 600 REFERENCES!

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 080112 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €86,376 Leasing rate: €1,438.29 In stock: 1 Special price: €76,100 Pressing force: 175 t Bending length: 3050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Distance between uprights: 2600 mm Throat depth (side frame): 450 mm Installation height: 530 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 100 mm/s Backgauge speed X-axis: 500 mm/s Backgauge speed R-axis: 350 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Oil tank: 250 l Motor power: 18.5 kW Length: 4250 mm Width: 1700 mm Height: 2850 mm Weight: 10,900 kg 4 axes (Y1, Y2, X, and R axes) CNC CONTROL DT-15 - 15” 2D graphic display - Intuitive touch-screen operation (easy bending contour drawing with finger) - User-friendly dialog programming - Automatic bending sequence calculation - Automatic calculation of flat length for sheet cutting - Graphic storage for products and tools - Correction capability - USB ports for backup and program transfer - PC software for programming on a PC, transferable to the machine via USB Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Top tool 1010/A/75°, segmented and offset 4-way die block 60x60 2009 (V = 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on upper beam Sheet support arms on linear guides Equipment compliant with CE regulations Oil fill Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S SERIES: - Increased stroke, installation height, and throat depth - Higher approach and return speed of the upper beam - Higher backgauge speed - Backgauge fingers on double rather than single linear guides Pgjdpfxswirane Agxek - More available options, such as additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem operation, alternative CNC controls, etc. OPTIONS (LEAD TIME FOR THESE OPTIONS APPROX. 10 WEEKS): Z1/Z2 axes DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) CNC control SKY22 CNC control Delem DA66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability Quick clamp lever for the top tool

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 080109 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €68,282 Leasing rate: €1,135.89 Bestseller: 1 Available in stock: 1 Special price: €60,100 Pressing force: 120 tons Bending length: 3050 mm Axes: Y1 / Y2 / X and R axis Stroke: 180 mm Distance between uprights: 2550 mm Side frame throat depth: 250 mm Installation height: 375 mm Drive concept: hydraulic Rapid traverse Y-axis: 100 mm/s Working speed Y-axis: 9 mm/s Return speed Y-axis: 77 mm/s Backgauge travel (X-axis): 620 mm (with optional R-axis) Backgauge speed X-axis: 250 mm/s Table height: 878 mm Table width: 104 mm Oil tank: 150 l Motor power: 11 kW Length: 3750 mm Width: 1230 mm Height: 2400 mm Weight: 5900 kg 4 axes (Y1, Y2, X, and R axis) CNC CONTROL DT-10 - 2D graphic display 10" - Intuitive touchscreen operation (easy drawing of bend contours with finger) - User-friendly dialogue programming - Automatic calculation of bending sequences - Automatic calculation of flat length for sheet cutting - Graphical product and tool storage - Correction options - USB ports for backup and program transfer - PC software for writing programs on the PC and transferring to the machine via USB CNC-controlled backgauge with linear guides and ball screws CNC-controlled crowning system in the table Intermediate pieces for upper die clamping Upper die 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radii hardened and ground Laser safety device Fiessler AKAS mounted on the upper beam Sheet support arms Side and rear safety guards Equipment according to CE regulations Pgsdpfx Ajwiq Sijgxek Oil fill Operating instructions in GERMAN and ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model thanks to series production of standardized models, with no compromises on quality and precision OPTION: DBend, 3D CAD/CAM import and simulation software (import of step, iges, and dxf files) WE HAVE MORE THAN 600 REFERENCES!

Stanje: novo, Leto izdelave: 2024, Condition: new Year of manufacture: 2024 Stock number: 8319 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €77,982 Leasing rate: €1,326.78 In stock: 1 Special price: €70,200 Press force: 200 tons Bending length: 3,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 210 mm Distance between uprights: 2,550 mm Throat depth (side frame): 250 mm Installation height: 445 mm Drive system: hydraulic Rapid traverse Y-axis: 100 mm/s Working speed Y-axis: 7 mm/s Return speed Y-axis: 73 mm/s Back gauge travel X-axis: 620 mm (with optional R-axis) Back gauge speed X-axis: 250 mm/s Table height: 858 mm Table width: 104 mm Oil tank: 150 l Motor power: 15 kW Length: 3,750 mm Width: 1,390 mm Height: 2,500 mm Weight: 8,160 kg 4 axes (Y1, Y2, X, and R axis) Pgedpfxewiqp Is Agxok CNC CONTROL DT-10 - 2D graphics display 10" - Intuitive touch screen operation (easy contour drawing with finger) - User-friendly dialog programming - Automatic bending sequence calculation - Automatic calculation of the developed length for sheet cutting - Graphical product and tool library - Correction possibility - USB ports for backup and program transfer - PC software to create programs on PC and transfer via USB to the machine CNC-controlled back gauge with linear guides and ball screws CNC-CONTROLLED CROWNING SYSTEM IN TABLE Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm), segmented, entry radii hardened and ground Laser safety device Fiessler AKAS mounted on the upper beam Sheet support arms Side and rear safety guards Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model due to serial production of standardized models without compromising quality and accuracy OPTION: Crowning system motorized and adjustable via CNC control Including: CNC-controlled R-axis (adjustment range in X = 500 mm) Including: DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Stanje: rabljeno, Leto izdelave: 2002, Condition: used Year of manufacture: 2002 Stock number: 090129 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €27,800 In stock: 1 unit Cutting length: 3,100 mm Max. sheet thickness (mild steel): 10 mm Frame throat (side stand): 350 mm Strokes per minute: 10 Cutting angle: 1.5° Backgauge: 1,000 mm Motor power: 22 kW Length: 3,800 mm Total width incl. support arm and rear safety guard: 3,600 mm Height: 2,000 mm Weight: 9,800 kg Swing cut design NC preselection controller ENC100 for backgauge, cutting length, and piece count Motorized backgauge up to 1,000 mm with ball screw, foldable Hydraulic hold-downs positioned close to the cutting edge Foot switch Central manual blade gap adjustment Pgodpfsx Urrhex Agxsk Cutting line illumination Wide support table with ball transfers Folding finger guard 1,000 mm 1 side gauge 1,500 mm with scale, T-slot, and flip stop 2 sheet support arms 1,000 mm with T-slot Oil filling included Light barriers at rear of machine Operating manual in GERMAN including CE declaration of conformity

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 090132 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €47,500 Leasing rate: €798.38 In stock: 1 Special price: €41,800 Cutting length: 3100 mm Max. sheet thickness – mild steel: 6 mm Max. sheet thickness – stainless steel: 4 mm Side frame throat: 50 mm Strokes per minute: 15 Cutting angle: 1.5° Number of hold-downs: 16 Hold-down pressure: 14 t Pgodpfxjwiqyyo Agxok Backgauge: 1000 mm Backgauge speed: 200 mm/s Motor power: 15 kW Hydraulic tank: 200 l Support arms: 2 pcs Table height: 865 mm Table width: 500 mm Table length: 3515 mm Overall length: 4110 mm Width: 2200 mm Total width with support arm and rear guard: 3700 mm Height: 2100 mm Weight: 7300 kg Swing beam shear design NC pre-selection control D-Touch 7 with touch screen for backgauge, cutting length, piece count, and USB interface Motorized backgauge, adjustable up to 1,000 mm with ball screws, can be lifted up Clearly arranged operator panel mounted on swiveling arm Hydraulic hold-downs positioned close to the cutting line Foot pedal Central manual blade gap adjustment Cutting line illumination Wide support table with ball transfers Piece counter Single and continuous stroke Folding finger guard 1,000 mm 1 side fence 1,500 mm with scale, T-slot, and cam stop 2 sheet support arms 1,000 mm with T-slot Easy blade change and re-sharpening Adjustable cutting length for economical processing Lower blade with four cutting edges, reversible Upper blade with two cutting edges, reversible Filled with oil Light barriers at the rear of the machine Qualified customer service Operating manual in GERMAN and ENGLISH Equipment in accordance with CE standards WE HAVE MORE THAN 850 REFERENCES!

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €102,300 Leasing rate: €1,933.47 Pressing force: 80 tons Bending length: 2550 mm Axes: 4 Stroke: 320 mm Distance between uprights: 2840 mm Installation height: 500 mm Drive concept: servo motor belt drive Rapid traverse Y-axis: 105 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 105 mm/s Backgauge travel X-axis: 650 mm Backgauge travel R-axis: 250 mm Length: 3700 mm Width: 2200 mm Height: 2550 mm Weight: 6400 kg Servo-motor drive Pgsdjynndfopfx Agxsk Transmission via multi-deflected flat belt 4 axes (Y1, Y2, X, R) CNC CONTROL DELEM DA-66S - 2D graphic display 17" - 3D visualization in simulation and production - Intuitive touch-screen operation (easy contour drawing by finger) - Simple and convenient data transfer - Multi-simulation capability - User-friendly conversational programming - Graphical simulation of bending process Servo-motor driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides Adapters for upper tool clamping Upper tool 1010/A/75°/0.8/105, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm) segmented, lead-in radii hardened and ground Light curtain safety system BLVT Sheet support arms on linear guide Side and rear safety guards Equipment according to CE regulations Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - No reduction of working width due to the side frames, distance between uprights is greater than the bending length - Up to 30% higher productivity compared to conventional hydraulic press brakes due to virtually delay-free response to foot pedal signal - Minimal frame deflection - No crowning system required because bending force is applied at multiple points along the bending length - High repeat accuracy and bending precision over the entire length - Low power consumption - No hydraulic components Options: CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability

Stanje: novo, Condition: new Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €98,600 Leasing rate: €1,863.54 Bending length: 3,100 mm Max. bending capacity – structural steel: 16 mm Max. plate thickness without pre-bending at D=5x top roller: 16 mm Max. plate thickness without pre-bending at D=3x top roller: 13 mm Max. plate thickness without pre-bending at D=1.5x top roller: 16 mm Max. plate thickness with pre-bending at D=5x top rollers: 14 mm Max. plate thickness with pre-bending at D=1.5x top roller: 12 mm Top roller diameter: 300 mm Bottom roller diameter: 300 mm Side roller diameter: 240 mm Max. opening: 50 mm Working height: 1,140 mm Motor power: 18.5 kW Length: 5,310 mm Width: 1,660 mm Height: 1,140 mm Weight: 11,100 kg 4 rollers PLC Fully hydraulic drive of top and bottom roller (from 30 mm bending capacity for all four rollers) via planetary gearbox Hydraulic side roller adjustment with electronic synchronization Hydraulic bottom roller adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rollers Cone bending device Psdpfxeynm Hfo Agxsgk Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE standards OPTIONS: Upper and side plate supports NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of nominal capacity Cone length may be max. 30% or must be more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov po naročilu Država izvora: Turčija Cena: 35.400 € Leasing obrok: 676,14 € Dolžina upogibanja: 3030 mm Največja zmogljivost upogibanja (konstrukcijsko jeklo): 6 mm Največja debelina pločevine brez upogibanja: 6 mm Podpfxoynm E Uj Agxegk Največja debelina pločevine z upogibanjem: 4 mm Premer zgornjega valja: 220 mm Moč motorja: 5,5 kW Dolžina: 4750 mm Širina: 1200 mm Višina: 1150 mm Teža: 4920 kg 3 valji Asimetrična razporeditev valjev z pred-upogibanjem 2 pogonska valja Motorizirano nastavljanje stranskega in pritisnega valja Digitalni prikaz položaja stranskega in pritisnega valja Zgornji valj izklopljiv naprej Delovanje naprej/nazaj Pobrušeni valji Premična upravljalna konzola Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI (Simbolna fotografija)

Stanje: novo, Stanje novo Dobavni rok približno 12 tednov od naročila Država izvora Turčija Cena 33.000 € Leasing rata 630,3 € Dolžina upogibanja 2530 mm Maks. kapaciteta upogibanja - konstrukcijsko jeklo 6 mm Maks. debelina pločevine brez predupogiba - konstrukcijsko jeklo 6 mm Maks. debelina pločevine s predupogibom - konstrukcijsko jeklo 4 mm Premer zgornjega valja 190 mm Moč motorja 5,5 kW Dolžina 4250 mm Pgedpfx Agjynm E Ijxsk Širina 1200 mm Višina 1150 mm Teža 3750 kg 3 valji Asimetrična razporeditev valjev - s predupogibom 2 gnana valja Motoriziran pomik stranskega in vpenjalnega valja Digitalni prikaz položaja stranskega in vpenjalnega valja Zgornji valj izhodno nagibljiv naprej Možnost dela naprej/nazaj Kaljeni valji Premična upravljalna konzola Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI (Simbolična slika)

Stanje: novo, Stanje novo Dobavni rok cca 12 tednov od naročila Država izvora Turčija Cena 27.800 € Leasing obrok 530,98 € Dolžina upogibanja 3030 mm Maks. upogibna zmogljivost - konstrukcijsko jeklo 4 mm Maks. debelina pločevine brez pred-upogibanja - konstrukcijsko jeklo 4 mm Maks. debelina pločevine s pred-upogibanjem - konstrukcijsko jeklo 2 mm Premer zgornjega valja 180 mm Moč motorja 4 kW Dolžina 4600 mm Širina 1120 mm Višina 1020 mm Teža 4250 kg Podpfeynm Ezex Agxjgk 3 valji Asimetrična razporeditev valjev - s pred-upogibanjem 2 gnana valja Motorizirano nastavljanje stranskega in pritiskalnega valja Digitalni prikaz položaja stranskega in pritiskalnega valja Zgornji valj se lahko izklopi naprej Tek naprej/nazaj Kaljeni valji Premična upravljalna plošča Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI (Simbolna slika)

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €74,800 Lease payment: €1,413.72/month Pressing force: 40 tons Bending length: 2,050 mm Axes: Y1 / Y2 / X and R axes Stroke: 200 mm Distance between uprights: 1,700 mm Throat depth (side frame): 350 mm Installation height: 440 mm Drive system: servo motor-driven spindle Rapid traverse (Y axis): 180 mm/s Working speed (Y axis): 10 mm/s Return speed (Y axis): 115 mm/s Backgauge travel range (X axis): 650 mm Backgauge travel range (R axis): 250 mm Table height: 1,000 mm Motor power: 7.2 kW Length: 2,600 mm Width: 1,450 mm Height: 2,650 mm Weight: 4,400 kg STANDARD EQUIPMENT: - Servo-driven spindle drive - 4 axes (Y1, Y2, X, and R) - Color graphics controller DELEM DA-66S • 17" color touchscreen • 3D visualization in simulation and production • Suitable for full Windows applications • Compatible with Delem Modusys • USB and peripheral interface • User-specific application support • Sensor, bending, and correction interface - Servo-driven backgauge on linear guides and recirculating ball screws - CNC-controlled crowning - Upper tool 1010/A/75°, segmented and gooseneck - 4-way die block 60x60 2009 (V=16, 22, 35, and 50 mm) - Laser safety device Fiessler AKAS mounted on upper beam - Sheet support arms on linear guides Podpfx Aoynm A Hsgxjgk - Equipment according to CE regulations - Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Higher productivity than conventional hydraulic press brakes due to virtually delay-free response to foot pedal signal - Low energy consumption - Compact spindle drive unit with a low number of individual components - No hydraulic components Options: - Z1/Z2 axes - CNC controller DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability - Quick clamping lever for upper tool

Stanje: novo, Condition new Delivery time approx. 12 - 14 weeks from order Country of origin Turkey Price €72,300 Leasing rate €1,366.47 Press force 40 t Bending length 1250 mm Axes Y1 / Y2 / X and R axis Pjdpsynm Aysfx Agxjgk Stroke 200 mm Distance between uprights 1050 mm Throat depth (side frame) 250 mm Installation height 440 mm Drive concept: servo spindle drive Rapid traverse Y-axis 115 mm/s Working speed Y-axis 10 mm/s Return speed Y-axis 115 mm/s Backgauge travel X-axis 650 mm Backgauge travel R-axis 250 mm Table height 1000 mm Motor output 7.2 kW Length 1950 mm Width 1450 mm Height 2650 mm Weight 3600 kg STANDARD EQUIPMENT: - Servo-driven spindle drive - 4 axes (Y1, Y2, X and R) - Color graphic control DELEM DA-66S - 17" color touchscreen - 3D visualization in simulation and production - Suitable for full Windows applications - Compatible with DelemModusys - USB and peripheral interface - Custom application support - Sensor, bending, and correction interface - Servo-driven backgauge with linear guides and recirculating ball screws - CNC-controlled crowning - Upper tool 1010/A/75°, segmented and goosenecked - 4-way bottom die block 60x60 2009 (V= 16, 22, 35, and 50 mm) - Laser safety device Fiessler AKAS, mounted on upper beam - Sheet support arms on linear guides - Equipment complies with CE regulations - Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Higher productivity compared to traditional hydraulic press brakes due to almost delay-free response to the foot pedal signal - Lower energy consumption - Compact drive spindle unit with a low number of components - No hydraulic components Options: - Z1/Z2 axes - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability - Quick-release clamping lever for the upper tool

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €127,400 Leasing rate: €2,407.86 Pressing force: 220 tons Bending length: 4050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Distance between uprights: 3600 mm Throat depth: 410 mm Installation height: 530 mm Drive concept: hydraulic Rapid traverse Y-axis: 200 mm/s Working speed Y-axis: 12 mm/s Return speed Y-axis: 180 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Length: 5250 mm Width: 1770 mm Height: 2900 mm Weight: 15,000 kg ONE SERVO MOTOR AND PUMP PER CYLINDER Standard equipment: - 4 axes (Y1, Y2, X, and R) - CNC control unit SKY 22 - Full HD graphic display 21.5” with 2D and 3D representation of the programed workpiece - Intuitive touchscreen operation (easy drawing of the bending contour with finger) - User-friendly dialog programming, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet cutting - Automatic calculation of bending sequences - Graphic product and tool memory - Correction option - USB ports and Ethernet connection for import, backup, and program export Pgsdpfoynm Amsx Agxek - Windows operating system - Import support for IGES, STEP, and DXF files - Servo-driven backgauge on linear guides and recirculating ball screws - Backgauge finger blocks on double linear guides - CNC-controlled crowning - Top tool 1010/A/75°, segmented and offset - 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) - Laser safety device Fiessler AKAS mounted on the upper beam - Sheet support arms on linear guides - Equipment complies with CE regulations - Oil filling - Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - The hydraulics run only during upper beam movement - Low energy consumption - Low noise emissions - High speed Options: - Z1/Z2 axes - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability - Quick-clamping lever for the upper tool

Stanje: rabljeno, Leto izdelave: 2004, Stanje rabljeno Leto izdelave 2004 Številka skladišča 9726 Dobavni rok takoj, vmesna prodaja mogoča Država izvora Turčija Cena 6750 € Na zalogi 1 Dolžina reza 1350 mm Maks. debelina pločevine - konstrukcijsko jeklo 3 mm Število hodov 35 1/min Kot reza 1,5° Zadnji omejevalnik 550 mm Moč motorja 3 kW Nastavljiva roka za podpiranje 2 kosa Višina mize 850 mm Širina mize 400 mm Dolžina 1700 mm Pgsdpfx Agsynmyroxsk Širina 1350 mm Višina 1200 mm Teža 950 kg Ročno nastavljiv zadnji omejevalnik Avtomatsko delujoč pritrdilni element Pritrdilni element z gumijastimi blazinicami Premični nožni pedal Stranski omejevalnik 2 kosa roki za polaganje pločevine Navodila za uporabo v NEMŠČINI Ne ustreza nemški UVV in avstrijski AMVO

Stanje: novo, Condition: new Delivery time: approx. 14 – 16 weeks from order Country of origin: Turkey Price: €252,800 Press force: 600 tons Bending length: 4,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 3,100 mm Frame gap clearance: 410 mm Installation height: 700 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Pgedpfxjynmxno Agxjk Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 154 mm Oil tank: 280 l Length: 5,750 mm Width: 2,500 mm Height: 4,000 mm Weight: 40,500 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 Axes (Y1, Y2, X and R) CNC CONTROL SKY 22 - Full HD graphics display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of bend contours using your finger) - User-friendly dialog programming, selectable in 2D or 3D mode - 2D and 3D bending process simulation - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet metal cutting - Automatic calculation of bending sequence - Graphical product and tool storage - Correction capability - USB ports and Ethernet connection for import, backup, and program export - Windows operating system - Import support for IGES, STEP, DXF files Servo-motor driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics run only during upper beam movement - Low energy consumption - Reduced noise emission - High speed PRICE FCA TURKEY Options: CNC control Delem DA-66 S CNC control Delem DA-69S 3D including PC software Profile-S with 3D file import capability

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €51,600 Leasing rate: €975.24 Cutting length: 3080 mm Max. sheet thickness – mild steel: 6 mm Max. sheet thickness – stainless steel: 4 mm Side frame throat depth: 350 mm Strokes per minute: 20 1/min Cutting angle: 0.5 – 2° Number of hold-downs: 16 Hold-down pressure: 20 t Backgauge travel: 1000 mm Backgauge speed: 200 mm/s Motor power: 11 kW Oil tank: 125 l Support arms: 3 pcs. Table height: 820 mm Table width: 494 mm Table length: 3280 mm Machine length: 4100 mm Machine width: 2050 mm Overall width with support arms and rear safety guard: 3650 mm Height: 1950 mm Weight: 7980 kg Guillotine design CNC touchscreen control D-touch 7 for backgauge, cutting angle, blade gap, cutting length, piece counter USB connection Cutting line illumination Foldable ball screw for backgauge Pjdpfx Ajwirwtogxogk Balls in table Foldable finger guard, 1,000 mm Side gauge with T-slots, tilting stop, and scale 3 support arms with T-slots Oil fill Light barriers at machine rear Operating manual in GERMAN and ENGLISH

Stanje: novo, Leto izdelave: 2026, Condition: new Year of manufacture: 2026 Stock number: 080186 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €81,476 Leasing rate: €1,309.77 In stock: 1 Special price: €69,300 Press force: 135 tons Bending length: 3050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Distance between uprights: 2600 mm Throat depth (side frame): 450 mm Installation height: 530 mm Drive type: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 120 mm/s Backgauge travel X-axis: 500 mm Backgauge speed X-axis: 500 mm/s Backgauge speed R-axis: 350 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Oil tank: 150 l Motor power: 15 kW Length: 4250 mm Width: 1700 mm Height: 2850 mm Weight: 9,580 kg SPECIAL PROMOTION Special price and free SKY 22 controller Standard equipment: - 4 axes (Y1, Y2, X, and R) - CNC CONTROL SKY 22 - Full HD graphic display 21.5” with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easily draw bending contours with your finger) - User-friendly dialog programming in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the unfolded length for sheet cutting - Automatic bending sequence calculation - Graphical product and tool storage - Correction functions - USB ports and Ethernet interface for import, backup, and program export - Operating system: Windows - Import support for IGES, STEP, DXF files - Servo-driven backgauge on linear guides and ball screws - Backgauge finger blocks on double linear guides - CNC-controlled crowning - Upper tool 1010/A /75°/0.8/105, segmented and offset - 4-way die block 60x60 2009 (V=16,22,35, and 50 mm) - Fiessler AKAS laser safety device mounted on upper beam - Sheet support arms on linear guides - Equipment according to CE specifications - Oil filling Pgodewirtnopfx Agxok - Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S: - More stroke, installation height, and throat depth - Higher approach and return speed of the upper beam - Higher backgauge speed - Backgauge fingers on double linear guides instead of single - More available options, e.g.: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem version, alternative CNC controls, etc.

Stanje: novo, Leto izdelave: 2026, Stanje novo Leto izdelave 2026 Številka skladišča 090187 Dobavni rok takoj, vmesna prodaja mogočna Država izvora Turčija Cena 14.400 € Leasing obrok 276,48 € Na zalogi 1 Dolžina reza 1350 mm Najv. debelina pločevine – ogljikovo jeklo 3 mm Število hodov 35 1/min Zadnji prislon 550 mm Moč motorja 3 kW Podporna roka 2 kos Višina mize 850 mm Širina mize 400 mm Dolžina 1900 mm Širina 1350 mm Višina 1260 mm Teža 1060 kg Ročni zadnji prislon Samodejni pritisni elementi Pritisni elementi z gumijastimi kapicami Premični nožni pedal Pgsdpfx Agswiq Epsxjk Stranski prislon 2 kosa podpornih roč Svetlobne zavese na zadnji strani stroja Navodilo za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €145,000 Leasing rate: €2,740.50 Cutting length: 6,080 mm Max. sheet thickness – mild steel: 6 mm Max. sheet thickness – stainless steel: 4 mm Throat depth (side frame): 350 mm Strokes per minute: 10 Cutting angle: 0.5 – 2° Number of hold-down clamps: 29 Hold-down force: 20 t Back gauge: 1,000 mm Back gauge speed: 200 mm/s Motor power: 22 kW Oil tank: 200 l Support arms: 5 pcs. Table height: 900 mm Table width: 630 mm Table length: 6,370 mm Length: 7,300 mm Width: 2,150 mm Total width with support arms and rear guard: 3,400 mm Height: 2,750 mm Weight: 25,500 kg Slider construction CNC touchscreen controller D-touch 7 for back gauge, cutting angle, blade gap, cutting length, and piece counter USB port CNC-controlled blade gap adjustment via table (patented) Oil cooler Manual central lubrication Cutting line illumination Swing-up ball screws for back gauge Balls integrated in table Swing-up finger guard, 1,000 mm Side stop with T-slots, tilting stop, and scale 5 support arms with T-slots Pre-filled with oil Light barriers at the rear of the machine Operating instructions in GERMAN and ENGLISH Pgedpfx Aowiqygegxok PRICE FCA TURKEY (Stock photo)

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 080091 Delivery: Immediate, subject to prior sale Country of origin: Turkey Price: €51,120 Leasing rate: €966.17 Available: 1 unit Press force: 60 t Bending length: 2,550 mm Axes: Y1 / Y2 and X Axis Stroke: 160 mm Distance between uprights: 2,150 mm Throat depth: 250 mm Installation height: 350 mm Drive system: Hydraulic Rapid traverse Y-axis: 120 mm/s Working speed Y-axis: 9 mm/s Return speed Y-axis: 70 mm/s Backgauge travel X-axis: 620 mm (optional R-axis available) Backgauge speed X-axis: 250 mm/s Table height: 813 mm Table width: 104 mm Oil tank: 100 l Motor power: 5.5 kW Pjdpfx Agjwva Igsxogk Length: 3,250 mm Width: 1,200 mm Height: 2,350 mm Weight: 4,250 kg 3 axes (Y1, Y2 and X axis) CNC CONTROL DT-10 - 10" 2D graphic display - Intuitive touch-screen operation (easy finger drawing of bend contours) - User-friendly dialogue programming - Automatic calculation of bending sequence - Automatic calculation of flat length for blank cutting - Graphic product and tool memory - Correction function - USB ports for backup and program transfer - PC software for program creation on PC and transfer to machine via USB CNC-controlled backgauge with linear guides and ball screws CNC-controlled crowning device in the table Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radii hardened and ground Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms Side and rear safety guards Equipment according to CE regulations Oil fill Operating manual in GERMAN or ENGLISH (Symbol photo shows model PBF 30200) ADVANTAGES OF THE PBF SERIES: - Compact design - Economical model thanks to series production of standardized models, with no compromise on quality or accuracy OPTIONS: CNC-controlled R-axis (X travel range = 500 mm) DBend, 3D CAD/CAM import and simulation software (import of STEP, IGES, and DXF files) WE HAVE MORE THAN 600 REFERENCES!

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €52,400 Leasing rate: €990.36 Press force: 60 t Bending length: 1,250 mm Axes: 3 (Y1, Y2, X) Stroke: 265 mm Distance between frames: 1,050 mm Throat depth: 450 mm Installation height: 530 mm Drive concept: hydraulic Rapid traverse Y-axis: 200 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 110 mm/s Back gauge travel X-axis: 650 mm Back gauge speed X-axis: 500 mm/s Table height: 900 mm Table width: 104 mm Oil tank: 100 l Motor power: 7.5 kW Length: 2,300 mm Width: 1,550 mm Height: 2,850 mm Weight: 4,700 kg Standard features: - 3 axes (Y1, Y2, X) - CNC CONTROL DT-15 - 15" 2D graphic display - Intuitive touch-screen operation (bend contours can be easily drawn with a finger) - User-friendly dialog-based programming - Automatic bend sequence calculation - Automatic calculation of developed length for sheet cutting - Graphical product and tool memory - Correction options - USB ports for backup and program transfer - PC software enabling programs to also be written on a PC and transferred to the machine via USB - Servo-driven back gauge on linear guides and ball screws - Back gauge finger blocks on double linear guides - Top tool 1010/A/75°, segmented and goosenecked - 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) - Laser safety device, Fiessler AKAS mounted on upper beam - Sheet support arms on linear guides - CE-compliant equipment - Oil filling - Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S SERIES: - Greater stroke, installation height, and throat depth - Higher approaching and return speed of the upper beam - Higher back gauge movement speed - Back gauge fingers on double linear guides instead of single - More options available, e.g.: additional back gauge axes (e.g., Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem operation, alternative CNC controls, etc. Pedpfx Aewird Tsgxogk Options: - R-axis - R/Z1/Z2 axes - DBend, 3D CAD/CAM import and simulation software (import of STEP, IGES, and DXF files) - CNC control SKY22 - CNC control Delem DA66 S - CNC control DELEM DA-69S 3D incl. Profile-S PC software with option to import 3D files - Quick-release clamping lever for top tool