Hermle Orodni Rezalnik nakup rabljenega (1.255)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Mikron WF 3S with 3-Axis Active Digital Readout (Heidenhain TNC 114) and Infinitely Variable Feed Technical Data: - Year of manufacture: approx. 1990 - Fixed angle table, clamping area: 800 x 450 mm - Spindle speed: 50 – 2240 rpm - Infinitely variable feed in 3 axes: 1 – 750 mm/min - Rapid traverse in 3 axes: 1400 mm/min - Travel X/Y/Z: 500/500/380 mm - Vertical quill, SK40, extendable - Weight: approx. 1600 kg Accessories and Equipment: - 3-axis active digital display Heidenhain TNC 114 Bedpfsxu Hkcsx Agtedb - Central lubrication system - Operating manual, programming instructions, electrical diagrams About the machine: Offered here is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain path control TNC 114, which means it can traverse a programmed distance in any axis, regardless of x, y, or z, and stops automatically upon reaching the set value. Four different zero points can be set; measurements can be input as absolute values or as incremental (chain) dimensions. The feed rate is infinitely variable from 0–750 mm and can be adjusted during milling operations. Rapid traverse can be activated at the push of a button. The spindle speed can be set in steps from 50 rpm to 2240 rpm, but only when the machine is stationary. The vertical milling head is fastened with three screws and can be removed or reattached within 2 minutes; it is manually mounted using the swing arm visible on the left side of the machine and can be easily swung aside. A particular feature of this machine is its exceptionally large travel ranges relative to its size: Z = 380 mm, X = 500 mm, Y = 500 mm. Furthermore, the machine is equipped with electronic protection for the vertical spindle. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test this machine under power on site.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Heidenhain Digital Readout, Original Condition!!! Technical Data: >> Machine No. 56560/08, year of manufacture approx. 1975 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm Bjdpfx Aju Nvxmogtodb >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system: S20x2 >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: Offered here is a universal milling machine Deckel FP1 in very good original condition. The Deckel has minimal backlash in the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Digital Readout K&C, infinitely variable feed, painted in light grey, excellent condition Technical Data: >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table >> Spindle speeds: 40 - 2000 rpm Bodpjt Aav Ijfx Agtjdb >> Infinitely variable feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable 100 mm on column >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Equipment and Accessories: >> 3-axis digital readout K&C newly installed with manufacturer's warranty and operating manual. Display unit: Reference points, zero setting, coordinate input, mm/inch switch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP1 in very good condition. The machine has very little backlash and all spindles move smoothly. All bellows have been replaced. On this newer FP1 model, feed is infinitely variable on two axes; the machine is also equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically inspected. The new K&C digital readout makes working easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout K&C (new) and 3 stepless feed drives – Excellent Condition Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2867 >> Swivel-tilt rotary table (newly planed) >> Speed range: 40 – 2000 rpm >> Stepless feed drive in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm Bedpot Aarpefx Agtedb >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quills – SK40 taper >> Drawbar system M16 >> Weight approx. 800 kg Equipment and Accessories: >> 3-axis digital readout K+C, newly installed with manufacturer's warranty and operating manual. Readout features: setting reference points, zero points, coordinate input, mm/inch switching, absolute or incremental coordinates, circle functions, hole arrays, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a Deckel FP1 universal milling machine, year 1985, in outstanding condition. The machine has minimal handwheel backlash and all spindles move smoothly. Even at maximum spindle speeds, the machine runs very quietly. On this newer FP1 model, feed drive is steplessly adjustable on all three axes, and rapid traverse is also available. The oil has been changed. Machine has been mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power onsite.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780, as new! Technical data: Bdedewpi Dqopfx Agtjb - Machine No.: 2101-51084, year 2011 - Fixed angle table - Spindle speed: 40 - 2000 rpm - Feed on 2 axes - Drive power: 1 / 1.5 kW - Travel X/Y/Z: 300/150/340 mm - Vertical quill SK40 and horizontal quill SK40 - Drawbar system: S20x2 - Weight approx. 700 kg Accessories and equipment: - 3-axis digital readout Heidenhain ND 780 - Hydraulic vice - Collets - Tool holders - Milling cutters - Operating manual - Coolant system About the machine: Offered here is a Deckel FP1 universal milling machine, repowered by FPS, in like-new condition. Included accessories are a hydraulic vice with swivel base, collet chucks, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is immediately available.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Complete Overhaul - TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed angle table Bdedpfx Agjvb Ud Uotjb >> Spindle speed: 40 - 2000 rpm >> Power feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Drawbar type: S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine feet About the machine: For sale is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash and all feed screws run smoothly. An oil change was performed. The FP1 underwent a complete overhaul by Huttelmaier in 2006 and has been used only sparingly since then. The RSF digital readout makes operation easier and even more precise. Take the opportunity to inspect and test-run this machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine no.: 2102-2601 Bjdsu Racropfx Agtsdb >> Swivelling, tilting, and rotating table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Draw-in system S20x2 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all lead screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter measurements that the machine will approach automatically. The FP1 was housed in a training workshop and was only occasionally used. An oil change has been carried out. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F729 Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very good CONDITION Technical Data: >> Year of manufacture: 1992 >> Machine number: 2102-6289 >> Rigid angular table (freshly planed) >> Spindle speed: 40–2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital display >> Coolant system >> Operating manual, spare parts diagram Bedou T D Nrepfx Agtodb About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all slides move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed on all three axes is infinitely variable, and the machine also features rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain DRO, you can enter dimensions and the machine will automatically move to them. The FP1 was previously used in a training facility and was only occasionally operated. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit by FA Huttelmaier Very good CONDITION Technical Specifications: - Year of manufacture: 1985, Machine no. 2102-2891 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300 / 160 / 340 mm - Vertical milling head movable 100 mm on column - Vertical and horizontal quill – ISO 40 taper - Drawbar system S20x2 - Weight approx. 800 kg Accessories & Equipment: Bdodpou Nvwvsfx Agtsb - 3-axis digital readout Heidenhain TNC111 - Coolant system - Operating manual, spare parts diagram About the machine: Offered here is a universal milling machine Deckel FP1, year 1985, in very good condition. The FP1 was overhauled in 2008 by the company Huttelmaier. The machine has minimal play on the handwheels and all leadscrews move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, feed is continuously variable on all three axes and, in addition, the machine features rapid traverse on all axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions which the machine automatically moves to. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis Heidenhain ND 780 digital readout - Excellent Condition! Technical Data: >> Machine No.: 55249/08, Year: 2010 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar thread S20x2 >> Weight approx. 700 kg Bedpfjxu Hbhex Agtsdb Accessories and Features: >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic machine vice >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant system About the Machine: Offered is a Deckel FP1 universal milling machine, professionally repowered by FPS and in like-new condition. The accessories include a hydraulic machine vice with swivel base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout enables easier and more precise work. Take the opportunity to inspect and test the Deckel on site under power. The machine is available immediately.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed As-New CONDITION Technical Data: >> Year of manufacture: 1987 Machine no. 2102-3536 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support adjustable by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Automatic central lubrication >> Machine lamp >> Coolant system Bedpfxeu R D I Ss Agtedb >> Operating manual, spare parts catalogue About the machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in an as-new, original condition. The machine has very minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed can be infinitely adjusted on all three axes, and the machine also features rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can enter dimensions which the machine then approaches automatically. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically inspected. Thanks to the Heidenhain digital readout, working with the machine is easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed, Light Grey, Excellent Condition Technical Data: >> Year of manufacture: approx. 1990, Machine No. 2102-5231 >> Fixed Angle Table >> Spindle Speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle mount, adjustable by 100 mm >> Vertical quill and horizontal quill – SK40 taper >> Drawbar system M16 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital readout >> Centralized electric lubrication >> Coolant system >> Operating manual and spare parts diagram Details about the Machine: Bdodpexu E R Ijfx Agtob Offered is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has minimal backlash, and all feed screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed in all three axes, as well as rapid traverse in these directions. A major benefit is the active 3-axis digital readout. With the Heidenhain positioning control, you can enter target dimensions, and the machine will automatically move to them. This FP1 was used in a training workshop where it saw only occasional use. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this outstanding machine under power on site. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture approx. 1975, machine no. 0681 >> Swiveling and tilting table (completely overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: vertical & horizontal spindle >> Extensible vertical and horizontal quill - SK-40 >> Drawbar system M16 >> Weight approx. 1300 kg Accessories and Equipment: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Centralized lubrication About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are new. The swiveling and tilting table is as good as new. An oil change has been performed. The machine has been mechanically and electrically tested. The digital readout makes working easier and even more precise. Take the opportunity to inspect and test the Deckel FP3 under power on site. Bdedpfexu E I Hex Agtjb The machine is immediately available!!!

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 956.71.80.288, potovalna razdalja osi X: 300 mm, pomik osi Y: 300 mm, pomik po osi Z: 300 mm, model krmilnika: HEIDENHAIN TNC 150, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Stroj je na dražbi zaradi prenehanja poslovanja podjetja. Oddaja ponudbe vas zavezuje k pravočasnemu prevzemu med 26.01.2026 in 29.01.2026! TEHNIČNI PODATKI Pomik po X-osi: pribl. 300 mm Pomik po Y-osi: pribl. 300 mm Bdjdpfx Agjxqg Itotsb Pomik po Z-osi: pribl. 300 mm Orodni vpenjalni stožec: SK 40 Dimenzije mize: 1.000 x 500 mm, s 7 utori PODROBNOSTI O STROJU Krmiljenje: HEIDENHAIN TNC 150 Električni podatki Obratovalna napetost: 380 V Frekvenca: 50 Hz Nazivni tok: 25 A Priključna moč: 10,5 kW Mere & teža Mere (D x Š x V): 2.500 x 2.400 x 2.200 mm Teža: 2.000 kg OPREMA Dokumentacija Vpenjalne glave Set končnih mer

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed, in Excellent Condition, CE Compliant Technical Data: >> Year of manufacture: 1992, Machine No. 2102-6209 >> Fixed angle table (freshly planed) >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle slide, adjustable by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, spare parts list About the Machine: Bdodpfoxdi Ivsx Agteb Offered here is a Deckel FP1 universal milling machine, CE compliant, in very good condition. The machine exhibits minimal backlash and all spindles move smoothly. The milling machine operates very quietly even at maximum speeds. A special feature is that the electrical cabinet is connected to the machine via a plug, which makes transportation easier. In this newer FP1 model, the feed on all three axes is infinitely variable, and there is also rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain positioning control, you can enter the dimensions and the machine will automatically approach them. This FP1 was used in a training workshop and was only occasionally operated. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout facilitates your work and delivers even higher accuracy. Take advantage of the opportunity to view and test this machine on site under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP4M with 3-axis Heidenhain active digital readout – Excellent condition, CE compliant!!! Technical Specifications: >> Year of manufacture: 1992 Machine No. 2203-8449 >> Fixed angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier >> Vertical quill and horizontal quill - SK40 >> Vertical quill extendable 90 mm >> Hydraulic drawbar system >> Weight approx. 1600 kg Accessories and Equipment: Bdsdpfx Aeu Tuk Hegtsb >> 3-axis active Heidenhain digital readout >> Coolant system >> Chip tray >> Centralized electric lubrication unit >> Operating manual, spare parts diagrams About the machine: Offered is a Deckel FP4M Universal Milling Machine, active version, in excellent condition. The machine features minimal backlash and all feed screws move smoothly. Even at maximum spindle speeds, the milling machine runs smoothly. The machine is equipped with hydraulic tool clamping. This FP4M was only used occasionally in a government facility for training purposes. On this newer FP4 model, the feed rates on all three axes are steplessly adjustable, and the machine features rapid traverse in every axis. A major advantage is the active 3-axis digital readout. With the Heidenhain traverse control, you can enter dimensions that the machine will automatically position to. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout system makes operation easier and more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP4MK with 3-Axis Heidenhain Digital Readout, Light Grey, Excellent Condition, CE Compliant!!! Technical Data: >> Year of construction: 1992 Machine no. 2203-8489 >> Fixed angular table >> Speed: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake Bdodpfx Agsw Evq Aotsb >> Rapid traverse: 1300 mm/min >> Travel (X/Y/Z): 500/400/400 mm >> Vertical milling head traversable on spindle carrier >> Vertical and horizontal quill – SK40 taper >> Vertical quill extendable by 90 mm >> Hydraulic clamping system >> Weight approx. 1600 kg Accessories and Equipment: >> 3-axis active Heidenhain digital readout >> Coolant system >> Chip tray >> Electric central lubrication >> Operating manual, spare parts diagrams About the machine: Offered here is a Deckel FP4M Aktiv universal milling machine in excellent condition and CE compliant. The machine has minimal backlash and all spindles move smoothly. The milling machine runs quietly even at maximum speeds. This model features hydraulic clamping. On this newer version of the FP4, the feed can be continuously adjusted in all three axes, and each axis is equipped with rapid traverse. A significant advantage is the active 3-axis Heidenhain digital readout, allowing input of dimensions for the machine to move to automatically. Oil has been changed, and the machine has been mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. You are welcome to inspect and test this machine under power at our location.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-Axis Heidenhain Digital Readout, Infinitely Variable Feed, Very Good Condition Technical Data: >> Year of manufacture: 1978 Machine No. 2202-10163 >> Fixed angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes Bdodsxghtvspfx Agtjb >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable on spindle carrier by 150 mm >> Vertical and horizontal quill - SK40 extendable >> Draw bar system S20x2 >> Weight approx. 1,400 kg Accessories and Equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Mechanical central lubrication About the Machine: Offered is a universal milling machine Deckel FP2 in very good condition. The FP2 has minimal backlash in the handwheels and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. On this newer FP2 model, the feed can be adjusted steplessly in all three axes; furthermore, the machine is equipped with rapid traverse on every axis. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: dober (rabljeno),

Stanje: novo, Leto izdelave: 2025, dolžina podajanja os X: 300 mm, dolžina pomika po osi Y: 165 mm, dolžina podajanja os Z: 280 mm, potovalna razdalja osi X: 310 mm, pomik osi Y: 170 mm, pomik po osi Z: 330 mm, poteza s peresom: 70 mm, največja hitrost vretena: 2.600 obr/min, hitrost vretena (min.): 40 obr/min, skupna masa: 730 kg, Dear Sir or Madam, We are pleased to offer you the Macmon M100 NC milling machine. This is a true all-rounder for training and small batch production environments. The Macmon combines a conventional machine base with a Heidenhain TNC128 CNC path control, making this model an absolute must-have in certain work areas. Bodpox H Nw Sjfx Agtedb Best of all: With a footprint of just one square meter, this machine fits into any workshop! Standard Technical Specifications: • Heidenhain TNC 128 controller (integrated in the control panel) • Ribbed cast construction with hardened and ground guideways on the column and support • Swiveling vertical head, 360° rotation • Extendable quill, stroke 70 mm • Removable vertical head for switching between vertical and horizontal milling • Prism guides on all axes • Ground leadscrew on all axes • Mechanical tool clamping for both vertical and horizontal spindles • Tool holder ISO 40 for tools according to DIN 2080 AT 3 with draw thread S 20 x 2 or M 16 • Fixed angle table 215 x 600 mm, T-slots 4 x 12 H7 (spacing 45 mm) • Vertical clamping surface 195 x 640 mm, T-slots 2 x 12 H7 (spacing 90 mm) • HEIDENHAIN direct linear measuring systems, resolution 0.001 mm • Positioning accuracy 0.02 mm, repeatability 0.005 mm • Horizontal milling unit, console, and end support • Chip tray, blue RAL 5019 • Painted blue RAL 5019, grey RAL 7035 • 1 operating manual • 1 CD with TNC 128 programming instructions • 1 inspection protocol and basic circuit diagram • 1 oil hand press • With counter bearing, running bushing ø 16 mm (slide bearing) for milling arbor length 230 mm • Machine lamp • Chip guard (required safety device according to EN 13128 for EU countries)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Ladies and Gentlemen, We are offering for sale a partially overhauled Deckel FP1 featuring a 3-axis Heidenhain TNC113 active control system, renowned for its ease of operation. This newer model, manufactured in 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone thorough partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary-tilt/swivel table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless, 5–500 mm/min Rapid traverse: 1,200 mm/min Equipment and accessories: 3-axis Heidenhain digital readout TNC113 with active control, stepless feed adjustment on all three axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service commitment to you: - We are a certified master workshop specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance Bdjdpfepy Eldex Agtob - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We are happy to handle shipping and/or installation for you

Stanje: zelo dobro (rabljeno), Rezkalni stroj DECKEL FP 2 iz izobraževalne ustanove -Dobro vzdrževano originalno stanje -Pomiki X/Y/Z 400x200x400 mm Bdedpfx Agjx Hyuhjtob -3-osni digitalni prikazovalnik "NOVO" -Kotni stroj – vpenjalna površina mize 700x350 mm -Območje vrtljajev 40–2000 obr/min -Avtomatski pomiki / hitri pomiki po vseh treh oseh -Orodni vpenjalni sistem ISO 40 -Vertikalna / horizontalna frezalna enota -Nagibna vertikalna glava z vrtalno tulejo -Hladilna naprava -Matica vretena osi X "NOVO" -Noge stroja -Strojni primež "RÖHM" -Razni nosilci za orodje -Pločevina za ostružke – podstavek stroja -Dokumentacija Dimenzije: D x Š x V 1,5 x 1,7 x 1,8 metra / Teža: 1500 kg Pridržujemo si pravico do napak in sprememb.

Stanje: rabljeno, potovalna razdalja osi X: 762 mm, pomik osi Y: 406 mm, pomik po osi Z: 508 mm, Milling machine, used Manufacturer: Fadal Model: 904-1 VMC 3016 Year of manufacture: Serial no.: 9401487 Technical specifications: X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Spindle taper: SK 40 Spindle speed: 8,000 rpm Bodjtud Utopfx Agtodb Machine weight: 3,800 kg

Stanje: dober (rabljeno), Leto izdelave: 1995, Universal tool milling machine Deckel FP 1 – several machines available, see pictures Bdedpfx Agjtdcfhsteb Model: FP 1 3-AXIS Heidenhain digital readout Price: from €9,500 excl. VAT Technical data: X-travel: 300 mm Y-travel: 150 mm Z-travel: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T-slot width: 12 mm Spindle speed range (vertical): 250 – 2000 rpm Spindle speed range (horizontal): 40 – 315 rpm Working spindle speed steps: 8 Feed range: 10 – 500 mm/min Feed steps: 8 Quill stroke: 60 mm Spindle taper: SK 40 Dimensions/Weight: 1235 x 1160 x 1800 mm / approx. 800 kg

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 140014, potovalna razdalja osi X: 760 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 8.000 obr/min, nosilec vretena: MK 4, dolžina mize: 1.270 mm, širina mize: 305 mm, skupna višina: 2.390 mm, skupna dolžina: 2.170 mm, skupna širina: 2.510 mm, skupna masa: 2.500 kg, teža obdelovanca (maks.): 200 kg, model krmilnika: Siemens 828 D, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Naprodaj je CNC rezkalni stroj tipa V 760 L proizvajalca MMD. Stroj je bil od leta 2014 v enosmenskem obratovanju, kaže običajne sledi uporabe, vendar je v celoti delujoč ter še vedno deluje natančno in zanesljivo. Tehnična oprema: Krmiljenje: Siemens 828 D Avtomatski menjalnik orodij Vključen 3D merilni tipalnik Bodpfoxnnb Njx Agtodb Avtomatsko merjenje orodij Stroj je pod napetostjo in si ga je kadarkoli mogoče ogledati v delovanju Stanje: Rabljeno, vzdrževano, tehnično brezhibno. Redno servisirano, takoj pripravljeno za uporabo. Letnik: 2014 Obratovanje: enosmenski režim Ogled in testni zagon možen po dogovoru.