Orodni rezalnik

Deckel FP1 Aktiv

Stanje: dober (rabljeno), Leto izdelave: 1985, Deckel FP1 Aktiv s 3-osnim digitalnim prikazovalnikom Heidenhain, 3 aktivne osi, togata miza, vreteno SK 40 M16. Centralno mazanje, navodila za uporabo. V dobrem delujočem stanju, prihaja iz centra za poklicno izobraževanje. Po dogovoru možno prikazati pod napetostjo. Kdedpfx Aexwunzjf Asw

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed, EXCELLENT CONDITION Technical Data: >> Year of manufacture: 1990 Machine No. 2102-5046 >> Fixed angular table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100 mm on spindle support >> Vertical and horizontal quill - SK40 taper >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electric lubrication >> Coolant system >> Operating manual, spare parts list Additional information about the machine: Kodpfxeu Um Ers Af Asdw Offered is a Deckel FP1 universal milling machine, year 1990, in very good condition. The machine has very little backlash on the handwheels and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed for all three axes is infinitely variable, and the machine is also equipped with rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain controller, you can enter dimensions which the machine will move to automatically. The FP1 was previously used in a training shop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this excellent machine under power on site.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, Dear Sir or Madam, We are pleased to offer a Deckel FP1 3-axis milling machine, equipped with retrofitted safety features. These newer models come with central lubrication, an electric coolant pump, and a brake motor as standard. Additionally, thanks to the Harting connector, the control cabinet can be disconnected from the machine in no time. The connection of all safety components to the control cabinet is also implemented with this connector type, ensuring that handling remains user-friendly. We provide a 12-month warranty on all retrofitted safety devices, which we can supply for any machine model! The electronic spindle guard is adjustable across multiple axes and is designed to prevent access to the working spindle while also protecting against hazards such as flying chips, coolant, etc. The electronic spindle safety cap is intended to prevent interference with the rotating spindle stub, including the tool clamping area. Delivery time: on request Year of manufacture: 1989-1992 Machine no. 2102-xxxx Table: fixed angle table Travels: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless 5–500 mm/min Rapid traverse: 1,200 mm/min Features and accessories: coolant device, central lubrication, manual, machine feet, electronic spindle guard, electronic spindle safety cap Kdodpfxouw Uu Ne Af Ajw Our service promise to you: - We are a certified master engineering company - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we will completely or partially overhaul your chosen machine - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories, such as additional safety equipment - We are happy to handle shipping and/or installation for you

Stanje: delavnici obnovljeno (rabljeno), Deckel FP1 AKTIV (3-axis Aktiv) Machine no. 2102-5745 Year of manufacture: approx. 1988 Travels: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Kdjdpsxpwfgefx Af Ajw Power supply: 380 Volt, 50 Hz Features: - Aktiv digital readout for 3 axes (HEIDENHAIN TNC 113) - Infinitely variable feed in X, Y, and Z axes - Quill traverse at vertical milling head: 60 mm - Vertical milling head is swiveling and extendable horizontally by 100 mm - Coolant system (coolant tank in machine base) - Documentation - Central lubrication Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically tested. Upon request, videos of the geometry can be provided. Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Deviation parallelism Y-axis: 0.002 mm (measuring length 150 mm) Deviation parallelism X-axis: 0.002 mm (measuring length 300 mm) The following parts have been renewed: - Central lubrication system checked - Heidenhain digital display overhauled - Set of scrapers installed - LEDs in Aktiv display replaced - Oil change - Vertical milling head re-bedded - Oil sight glass replaced Net price ex works, loaded from stock

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, DECKEL FP1 Aktiv Milling Machine Manufacturer: Deckel Kodpfoxnniasx Af Asdw Model: FP1 Aktiv Condition: Very good Control type: Conventional Control: Aktiv HEIDENHAIN TNC X travel: 300 mm Y travel: 160 mm Z travel: 340 mm Tool holder: SK40 Spindle speed: 40–2000 rpm Control: Aktiv HEIDENHAIN TNC Total power requirement: 2 kW Machine weight approx. 0.73 t Space requirements approx. LxWxH 1200x1100x1600 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine no.: 2102-2601 >> Swivelling, tilting, and rotating table Kdsdpfxju Racre Af Asw >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Draw-in system S20x2 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all lead screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter measurements that the machine will approach automatically. The FP1 was housed in a training workshop and was only occasionally used. An oil change has been carried out. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 with 3-axis TNC113 active control, which is particularly notable for its ease of operation. This newer model from 1989 features, among other things, central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on site. As part of the partial overhaul, the following work was carried out, among others: - Spindle bearings in the milling head replaced - Repainted - Various standard parts such as handles, oil sight glasses, switches, etc. replaced - Worn parts such as drive belts replaced - Way covers partially replaced - Gib strips adjusted - And much more... Delivery time: immediate Year of manufacture: 1989 Machine No.: 2102-xxxx Table: rigid angle table Travel: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Kjdpfx Afjpy Elds Ajdw Tool holder: SK40 Feed: stepless 5–500 mm/min Rapid traverse: 1,200 mm/min Features & accessories: coolant system, central lubrication, manual, machine feet Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and worn parts, if necessary, are replaced in advance - Upon request, we can completely or partially overhaul your chosen machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional accessories such as safety equipment - We are happy to arrange shipping and/or installation

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F729 Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very good CONDITION Technical Data: >> Year of manufacture: 1992 >> Machine number: 2102-6289 >> Rigid angular table (freshly planed) >> Spindle speed: 40–2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Ksdpfx Afsu T D Nrj Aodw Accessories and Features: >> 3-axis Heidenhain TNC113 digital display >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all slides move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed on all three axes is infinitely variable, and the machine also features rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain DRO, you can enter dimensions and the machine will automatically move to them. The FP1 was previously used in a training facility and was only occasionally operated. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit by FA Huttelmaier Very good CONDITION Technical Specifications: - Year of manufacture: 1985, Machine no. 2102-2891 - Fixed angle table - Spindle speed: 40 – 2000 rpm Kodpsu Nvwvofx Af Aedw - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300 / 160 / 340 mm - Vertical milling head movable 100 mm on column - Vertical and horizontal quill – ISO 40 taper - Drawbar system S20x2 - Weight approx. 800 kg Accessories & Equipment: - 3-axis digital readout Heidenhain TNC111 - Coolant system - Operating manual, spare parts diagram About the machine: Offered here is a universal milling machine Deckel FP1, year 1985, in very good condition. The FP1 was overhauled in 2008 by the company Huttelmaier. The machine has minimal play on the handwheels and all leadscrews move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, feed is continuously variable on all three axes and, in addition, the machine features rapid traverse on all axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions which the machine automatically moves to. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed As-New CONDITION Technical Data: >> Year of manufacture: 1987 Machine no. 2102-3536 >> Fixed angle table Kdsdpfx Afju R D I Se Aew >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support adjustable by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Automatic central lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts catalogue About the machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in an as-new, original condition. The machine has very minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed can be infinitely adjusted on all three axes, and the machine also features rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can enter dimensions which the machine then approaches automatically. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically inspected. Thanks to the Heidenhain digital readout, working with the machine is easier and even more precise. Take the opportunity to inspect and test this gem on site under power.