Glavno Vreteno nakup rabljenega (2.889)

Stanje: zelo dobro (rabljeno), Premer struženja nad ležiščem: 900 mm Nljdpfeym D H Tex Aarjc Premer struženja nad suportom: 600 mm Dolžina struženja: 3000 mm Število vrtljajev vretena: 11,2 - 560 vrt/min Nosilec orodja: Multifix D1 Skupna potrebna moč: 22 kW Teža stroja pribl.: 5,6 t Prostorske zahteve pribl.: 5,6 x 1,8 x 1,7 m Varnostna predelava po CE standardu 2017 2011 nova vzdolžna navojna vretena, delno obnovljena menjalna omara, mazanje po notranjem načrtu.

Stanje: rabljeno, Leto izdelave: 1972, Swing diameter over bed: 400 mm Nedpfx Ajvzhhyoarelc Swing diameter over support: 220 mm Turning length: 1,000 mm Spindle speeds: 12.5 - 2,000 rpm Spindle mount: Bayonet 55022 Spindle bore: 47 mm Feeds – longitudinal: 0.07 - 4.16 mm/rev Feeds – cross: 0.035 - 2.08 mm/rev Metric threads: mm pitch Imperial threads: 2 - 24 TPI Rapid traverse – longitudinal/cross: 3.4 / 1.7 m/min Spindle motor: 11 kW Drive power: 13 kW Machine weight: approx. 2.8 t Space requirements: approx. 2.8 x 1.2 x 1.5 m 3-jaw chuck diameter: 250 mm 4-jaw chuck diameter: 200 mm Two-axis digital readout ANILAM WIZARD LATHE – retrofitted in 1992

Stanje: rabljeno, Konji med konicami: 2.000 mm Premer vrtenja nad posteljo: 350 mm Obodni premer nad sani: 470 mm Širina postelje: 525 mm Hitrost vrtenja: 25 - 1.250 min⁻¹ Pogonska moč: 18 kW Premer vretena: 92 mm Vretenin glava: ISO 702-3 Gr. 15 Premer pinole: 145 mm Notranji stožec pinole: MK 6 Vzdolžni pomik: 0,035 – mm/-1 Prečni pomik: 0,009 – 8,0 mm/-1 Rezanje navojev - metrično: 0,5 – 304 mm Nlodezczhmjpfx Aarjc Po naši oceni je stroj v dobrem rabljenem stanju in ga je možno na podlagi dogovora videti pod napetostjo. Vodila so v zelo dobrem stanju. Tehnične značilnosti & dodatna oprema: - razna dodatna oprema Dodatna oprema, prikazano orodje in vpenjalna sredstva so vključeni v dobavo samo, če je to posebej navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje!

Stanje: rabljeno, Leto izdelave: 1985, Swing diameter over bed: 810 mm Maximum swing diameter over cross slide: 560 mm Nsdpfxexn Ty Re Aarolc Distance between centers: 00 mm Bed width: 480 mm Cross slide travel: 400 mm Top slide travel: 180 mm Turning tool shank cross-section: 32 x 25 mm Drive power: 22 kW Spindle torque: 30 Nm Spindle nose size: 11, DIN 55027 Spindle diameter at front bearing: 152.4 mm Spindle bore: 106 mm Speed range: 9 - 1800 rpm Number of speeds: 24 Longitudinal feed: 0.092 - mm/rev Cross feed: 0.046 - mm/rev Metric threads: 0.5 - 112 mm Inch threads: 1/4 - 56 TPI (G/1") Thread module: mm Thread DP: 1 - 224 pitch Tailstock quill diameter: 115 mm Quill stroke: 225 mm Quill taper: MK 6 Workpiece weight between centers, max.: 00 kg Workpiece weight, max. (unsupported): 750 kg Röhm 3-jaw chuck, Ø ... Machine dimensions approx.: 4600 x 1900 x 1600 mm Weight approx.: 4300 kg Number of feed and thread pitches: 99 Distance between centers: 00 mm Accessories: - 3-axis digital readout - Mobile chip guard along the entire length (plexiglass) - Coolant system - Rapid traverse in Z and X axes - Multifix toolholder, size C, with 6 interchangeable cartridges - Bed stop with micrometer adjustment - Fixed steady rest - 300 mm - Taper sleeve for main spindle MK 6 - Live center (cone center) MK 6 Bed guideways in very good condition!

Stanje: rabljeno, Leto izdelave: 1966, Premer vrtenja nad posteljo: 330 mm Premer vrtenja v izrezu: 400 mm Dolžina struženja: 600 mm Razdalja med konicami: 750 mm Hitrosti vretena: 20 - 1000 min⁻¹ Vrtina vretena: 25 mm Nsdpjxrg Atofx Aarslc Tričeljustna glava Röhm, Ø 200 mm Potrebni prostor cca 2000 x 800 x 1500 mm Teža stroja cca 1200 kg Fiksna luneta Sočasna luneta Vrteča konica Tričeljustna glava Röhm, Ø 200 mm, vključno z notranjimi in zunanjimi čeljustmi Hitromenjalni nosilec orodja Original Multifix Gr.B z 2 nadomestnima nosilcema Zavora vretena Konica vpetja za konjiček MK3 Strojne noge Zaščita stružne glave Stena proti odmetu ostružkov Delovna svetilka

Stanje: rabljeno, Swing diameter over bed: 540 mm Maximum swing diameter over cross slide: 370 mm Distance between centers: 3000 mm Center height: 270 mm Swing diameter in the gap: 815 mm Bed width: 344 mm Spindle bore: 88 mm Spindle diameter at front bearing: 133 mm Spindle mount: 11" D1 Camlock Speed range: 18-1400 rpm Number of spindle speeds: 16 Three-jaw chuck Röhm Ø 315 mm Longitudinal feed: 0.06-1.0 mm Cross feed: 0.03-0.5 mm Metric threads: 0.4-14 mm Inch threads: 2-72 TPI Thread module: 0.3-3.5 mm Nlodoxnqzxopfx Aaroc Thread DP: 8-60 pitch Tailstock quill diameter: 75 mm Quill stroke: 230 mm Quill taper: MT 5 Cross slide travel: 280 mm Top slide travel: 150 mm Machine dimensions (approx.): 4700 x 1100 x 1400 mm Weight (approx.): 3200 kg Drive power: 9.4 kW Equipment: - 2-axis Fagor digital readout - Röhm wedge bar chuck Ø 315 mm incl. hard base jaws and hard top jaws - Multifix toolpost size C incl. 6 quick-change toolholders - Live center - Power-actuated chuck guard - 2 steady rests - Chip guard/back wall - Coolant device - Work lamp Guideways in good condition, no scoring, not worn. Machine is in good general condition with age-appropriate signs of use. Including operating manual.

Stanje: rabljeno, Leto izdelave: 1996, Premer vrtenja nad posteljo 350 mm Največji premer vrtenja nad prečnim suportom 200 mm Razdalja med konicama 800 mm Višina konic 175 mm Dolžina struženja 700 mm Tričeljustna glava Röhm Ø 160 Vrtina vretena 46 mm Vretenasta glava Gr. 5, DIN55027 Število stopenj vretena 18 Hitrosti vretena 31,5-2500 obr/min Vpemanje pinole konjička MK 3 Nledpsy Ez Dzjfx Aaroc Teža stroja pribl. 1000 kg Upravljanje z joystickom 3-osni digitalni prikaz Sošolna konica Zadnja stena za ostružke Nosilec noža Multifix Gr. E s 3 izmenljivimi kasetami Nastavljive nogice stroja Hladilna naprava Delovna svetilka Prisotna navodila za uporabo zelo dobro stanje, stroj iz učne delavnice velike korporacije.

Stanje: rabljeno, Leto izdelave: 1971, Premer vrtenja nad posteljo 297 mm Premer vrtenja nad sani postelje 160 mm Dolžina struženja 500 mm Kratkokonusni priključek velikost 5 Vrtina vretena 36 mm Hitrosti vretena 30-3550 min⁻¹ Število stopenj hitrosti 18 Pomik pinole 90 mm Ležišče pinole v konjičku MK 3 Prečni pomik +15 Premik konjička ročno 500 mm Teža stroja pribl. 610 kg Potrebna površina pribl. 1,4 x 0,7 x 1,2 m Pribor: Klinasta vrtljiva glava Forkardt, Ø 160 mm Vpenjalni tulec, Vpenjalne puše (glej fotografijo) Nosilec orodja sistem Multifix velikost A Nlsdoy Hxp Dopfx Aarjc s 3 vložki za hitro menjavo Sledilna konična glava Zaščitna stena proti ostružkom Zaščita vpenjalne glave Stojna luneta Stroj prihaja iz izobraževalne delavnice uglednega nemškega podjetja.

Stanje: novo, Leto izdelave: 2026, OPTIturn TU 2004V – Lathe with Stepless Speed Control and Digital Speed Display Nledpfxjcnxrce Aarec Image shows OPTIturn TU 2004V Lathe with stepless speed control and digital speed readout Precision Engineering Sturdily ribbed prism bed made of cast steel, induction hardened and precision ground Hardened and ground bed guides Hardened spindle nose (DIN 6350) Guaranteed spindle nose run-out accuracy better than 0.009 mm Automatic longitudinal/lead screw drive Equipped with longitudinal, cross, and compound slides Selectable forward/reverse rotation on control panel Emergency stop button Chuck guard Thrust bearing Leadscrew mounted in two sintered bearings Wide threading range via change gear set Simple and quick speed changes via V-belt Change gear transmission EMC filter class B (approved for domestic use) Equipment details: - Digital speed indicator - Easy-to-read digital speed display - Chip guard on compound slide - Four-way tool post, rotatable - Roll-threaded trapezoidal spindle (leadscrew) - Tailstock adjustable for taper turning - Tailstock quill and handwheel with fine adjustable scaling 0.02 mm - Main spindle hardened and mounted in adjustable precision taper roller bearings - Taper roller bearings in P5 quality - Cylindrical centering receiver - Hardened spindle nose with 21 mm spindle bore - Chuck with run-out accuracy better than 0.04 mm Scope of delivery: - 3-jaw chuck Ø 100 mm, self-centering - Fixed centre MK 2 - Fixed centre MK 3 - Splash guard - Chip tray - 4-way tool holder - Change gear set - Operating tools Model: OPTIturn TU 2004V Item No.: 3420310 Technical Data Power supply: 230 V / 1 Ph ~50 Hz Spindle motor power: 600 W Spindle taper: MK 3 Spindle bore: 21 mm Passage of 3-jaw chuck: 20 mm Tool post mounting height: max. 12 mm Centre height: 100 mm Centre distance: 300 mm Max. turning diameter: 200 mm Swing over cross slide: 110 mm Bed width: 100 mm Spindle speed: 150 – 2,500 rpm Number of steps: 2, speed electrically adjustable Compound slide travel: 55 mm Cross slide travel: 75 mm Longitudinal feed range: 0.1 / 0.2 mm/rev Metric thread pitch: 0.25 – 3 mm/rev (14) Imperial thread pitch: 44 – 8 TPI (12) Tailstock taper: MK 2 Tailstock quill travel: 65 mm Dimensions (L x W x H): 830 x 425 x 360 mm Net weight: 61 kg

Stanje: rabljeno, Leto izdelave: 1999, Technical details: Swing diameter over bed: 340 mm Swing diameter over support: 190 mm Turning length: 700 mm Distance between centers: 700 mm Spindle speeds: 55 - 2350 rpm / 8-step mechanical Spindle bore: 50 mm Tailstock quill travel: 120 mm Tailstock quill: MT3 Spindle torque: 350 Nm Maximum workpiece weight – between centers: 50 kg Nlsdpfx Aou Ixw Aearoc Total connected load: 3.0 kVA Machine weight approx.: 0.79 t Machine dimensions approx. LxWxH: 1.6 x 0.9 x 1.4 m 3-jaw chuck Forkardt Ø 200 (external clamping) Longitudinal slide X-axis travel: 600 mm; longitudinal feed 0.045 - 0.787 mm in 20 steps; metric thread Cross slide Y-axis travel: 220 mm; feed 0.023 - 0.406 mm in 20 steps Top slide swivels 60° right and 120° left Thread cutting Machine lighting No coolant system (pre-installed) Accessories: 3 sets of turning jaws 3x Multifix toolholders 2x drill chucks 1x live center 3 machine feet

Stanje: rabljeno, Leto izdelave: 1987, Technical specifications: Swing diameter over bed: 500 mm Swing diameter over cross slide: 280 mm Turning length: 1500 mm Distance between centers: 1500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Spindle speed range: 25–1250 / 32–1600 / 36–1800 rpm, 18 steps Feed rate: 0.05 – 8.5 mm/rev Nedpfxsu Ixzns Aarolc Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Tailstock quill stroke: 200 mm Total connected load: approx. 8.2 kW Machine weight approx.: 2.5 t Machine dimensions (L x W x H): approx. 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 – 2.8 mm (end position clutch not functional, manual shut-off required) Top slide with 4-way toolpost Steel faceplate Ø 705 mm with offset threaded holes

Stanje: rabljeno, Tehnične podrobnosti: Premer struženja nad posteljo: 560 mm Premer struženja nad suportom: 280 mm Dolžina struženja: 2000 mm Višina konic: 280 mm Razdalja med konicami: 1600 mm Izvrtina glavnega vretena: 65 mm Območje vrtljajev: 9...1800 / 24 stopenj min⁻¹ Vzdolžni pomik: 0,025-0,09 mm/obrat Prečni pomik: 0,012-0,045 mm/obrat Nledpfxswa I Shj Aarec Pomik pinole konjička: 225 mm Priključek konjička: MK5 Skupna priključna moč: 18 kW Teža stroja pribl.: 3,8 t Mere stroja (DxŠxV): 3,7 x 1,6 x 2,05 m Trivpenjalni vpenjalni tulec D=320 mm Zgornji suport vrtljiv ±45°

Stanje: rabljeno, Leto izdelave: 1952, Technical Details: Swing diameter over bed: 1000 mm Swing diameter over slide: 520 mm Turning length: 2500 mm Slide travel Z-axis, saddle: approx. 500 mm Slide travel Z-axis, top slide: approx. 300 mm Center height: 300 mm Spindle bore: 90 mm Speed range: 3.2 - 382 / 22 steps rpm Feed range X-direction, longitudinal: 0.213 - 2.67 / 36 steps m/min Feed range Y-direction, cross: 0.070 - 1.11 / 36 steps m/min Nodou Tq U Iopfx Aarelc Tailstock quill taper: MK 6 Total power requirement: 22 kW Machine weight approx.: 8.2 t Machine dimensions approx. LxWxH: 5.3 x 1.6 x 1.6 m Transport dimensions approx.: 5.5 x 1.7 x 1.6 m Equipment: Face plate Ø 1000 mm 4-position tool post Steady rest Ø 250 mm, closed Accessories: Four-jaw chuck Ø 630 mm

Stanje: rabljeno, Leto izdelave: 1976, Technical Details: Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Turning length: 800 mm Turning length: facing = 140 mm / cross = 120 mm Centre height over bed: 170 mm Spindle bore: Ø 40 mm Spindle speed range: 25 - 2000 RPM / 20 steps Feeds: longitudinal: 0.028 - 1.0 mm/rev / cross: 0.012 - 0.44 mm/rev Tailstock quill taper: MT3 Tailstock quill travel: 120 mm Total power requirement: 3.0 kW Machine weight approx.: 1.1 t Machine dimensions approx. LxWxH: 2.0 x 0.8 x 1.4 m Thread cutting possible: Metric, Whitworth, and module threads Nsdpfx Aaova Ertorelc Equipment: - 2-way measuring system VISUCONT - 3-jaw chuck Ø 205 mm with internal clamping jaws - Multifix quick-change tool post - Foot brake - Coolant pump (delivery line exclusive)

Stanje: rabljeno, Leto izdelave: 2016, Technical Details: Swing diameter over bed: 402 mm Swing diameter over cross slide: 245 mm Turning length: 1000 mm Centre distance: 1000 mm Centre height: 200 mm Swing diameter in gap: 560 mm Gap width: 120 mm Spindle speeds: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev cross: 0.025 - 0.376 mm/rev Spindle bore diameter: Ø 42 mm Tailstock taper (ISO): MK4 Tailstock quill stroke: 180 mm Total connected load: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions approx. (LxWxH): 2.4 x 1.0 x 1.7 m The lathe does not feature rapid traverse. Positioning via 2 axes Display via Pinacho Lathe Controller Nsdpfx Asvav Sdsarslc Multifix quick-change tool post with turning tool Coolant system Foot switch Thread cutting possible (metric, Whitworth, module, pitch)

Stanje: rabljeno, Technical details: Nedpfx Aeu Ixy Dearelc Swing over bed: 320 mm Turning length: 800 mm Distance between centers: 800 mm Center height: 150 mm Spindle bore: 30 mm Speed range: 35 - 1500 rpm / 16 steps Feed range X-axis: 0.04 - 2.4 m/min / 30 steps Tailstock quill stroke: 125 mm Tailstock taper: MT2 Machine dimensions approx. LxWxH: 1.7 x 0.8 x 1.5 m Equipment and additional features: - Röhm 3-jaw chuck 160 mm - Chuck guard - Safety system WxH: 510x400 mm - Multifix tool holder (4 pcs) - Centre in tailstock - Compound slide swivels +/- 45°, maximum travel = 100 mm - Cross slide travel = 300 mm feed - Pump for coolant system (without supply)

Stanje: rabljeno, Leto izdelave: 1960, Technical Details: Swing diameter over bed: 630 mm Swing diameter over saddle: 320 mm Turning length: 2,800 mm Distance between centers: 2,800 mm Swing diameter in gap: 700 mm Gap length: 450 mm Spindle bore: 70 mm Machine weight approx.: 4.4 t Machine dimensions approx. LxWxH: 4.7 x 1.5 x 1.5 m Nlsdpfx Aasu Ix A Eersc Thread cutting capability Accessories: 4-jaw chuck Various centers Gears Jaws and small parts Steady rest *

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 500 mm Nlodpfx Aajv A Sqherjc Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Centre distance: 1000 mm Spindle speeds: 11.2 – 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 – 1.6 mm/rev – 32 steps Cross feeds: 0.02 – 0.71 mm/rev – 32 steps Total power requirement: 11 kW Approx. machine weight: n/a t Approx. machine dimensions (LxWxH): 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle operation) and available ex location Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for speeds up to 2000 rpm. Thread cutting: metric, module, imperial Chip guard Chuck guard (mechanical) MULTIFIX toolpost with Ø 40 mm boring bar holder Chip tray Coolant supply with pump Leadscrew protection Machine feet UVV (accident prevention regulation) pre-installed *

Stanje: rabljeno, Leto izdelave: 1970, Technical Details: Swing diameter over bed: 325 mm Swing diameter over support: 150 mm Turning length: 1000 mm Turning length, facing: 165 mm / cross: 160 mm Center height over bed: 200 mm Length of gap: no gap mm Spindle speed range: 48 - 1,500 rpm / 10 steps Spindle bore: 40 mm Feeds: longitudinal: 0.021–2.34 mm, cross: 0.09–1.6 mm Tailstock quill taper: MK 4 Tailstock quill travel: 125 mm Total power requirement: 2.2 kW Machine weight approx.: 1.0 t Machine dimensions approx. LxWxH: 2.1 x 0.7 x 1.2 m Thread cutting possible: Metric, Whitworth and module threads Equipment: Nlodpfxju Ixydj Aarec - 3-jaw chuck Ø 200 mm with internal clamping jaws - Multifix quick-change tool post - Foot brake - Coolant pump (supply exclusive)

Stanje: rabljeno, Leto izdelave: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Swing diameter in the gap: 600 mm Spindle speed range: 24 - 900 / 8 steps rpm Spindle bore: 41 mm Feed range X-axis: 0.0120 - 0.1000 mm/rev Feed range Z-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Njdpou Ix D Aefx Aarslc Total power requirement: approx. 4.0 kW (non-binding) Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.3 x 0.9 x 1.3 m Equipment: 3-jaw chuck Röhm Ø 200 mm 4-way tool post, swiveling 30° right/left 2x T-slot for copying device Live center

Stanje: rabljeno, Leto izdelave: 1951, Technical Details: Swing over bed: 400 mm Swing over cross slide: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: MT 4 Tailstock quill travel: 180 mm Approx. machine weight: 1.6 t Approx. machine dimensions (LxWxH): 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. It has been rewired and fitted with a new control cabinet. Emergency stop switch and chuck guard Nlsdpfxju Ix Hdo Aaroc 3-jaw chuck, Ø 250 mm Live centre Toolpost: four-way toolholder Compound slide swivels approx. 30° to the right/left Taper turning attachment (taper 15° right/left) 4 change gears included

Stanje: rabljeno, Leto izdelave: 1986, Technical details: Swing diameter over bed: 315 mm Swing diameter over cross slide: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum swing diameter over face slide: 200 mm Centre height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 rpm / only 6-step left-right Feed range X-axis: longitudinal: 0.02–0.8 m/min Feed range Y-axis: cross: 0.01–0.4 m/min Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m - Workpiece clamping via collet chuck - Travel distances: longitudinal slide = 580 mm, cross slide = 170 mm - incl. tool rest Njdpfxou Ix Hqj Aarslc - incl. change gears - Steady rest Ø 100 mm - Four-way toolpost The machine is operating with restricted function! 6 spindle speeds are currently selectable! (224/1800; 280/2240; 355/2800 rpm) Sale as described.

Stanje: rabljeno, Leto izdelave: 1970, Technical details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 300 mm Turning length: 1000 mm Centre height measured in bed: 250 mm Centre distance: 1000 mm Spindle speeds: 18...1800 / 21 step rpm Spindle bore: 56 mm Tailstock quill stroke: 180 mm Longitudinal feeds: 0.08 - 3.26 mm/rev Cross feeds: 0.04 - 1.63 mm/rev Rapid traverse X-axis: 4.2 m/min Total power requirement: 7.5 kW Machine weight approx.: 2.9 t Machine dimensions approx. LxWxH: 2.6 x 1.1 x 1.3 m 4-jaw chuck Ø 250 mm with internal jaws Live centre in tailstock 4-way quick-change tool post Nljdpfx Ajvvrpksarec Coolant system Accessories: various reduction sleeves MK3-MK5-MK4 Live centre Driving dog 3-jaw chuck Ø 250 mm with internal jaws The machine does not comply with UVV regulations!

Stanje: rabljeno, Leto izdelave: 1963, Technical details: Swing diameter over bed: 1000 mm Swing diameter over saddle: 620 mm Turning length: 3150 mm Centre distance: 3150 mm Nledeu Ix Aropfx Aaroc Swing diameter in gap: 1200 mm Length of gap: 800 mm Machine weight approx.: 11.5 t Machine dimensions approx. LxWxH: 7.5 x 1.5 x 1.7 m Including 2 steadies and various centres

Stanje: rabljeno, Leto izdelave: 1974, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 300 mm Turning length: 2,100 mm Distance between centers: 2,000 mm Spindle bore: approx. Ø 60 mm Speed range: 35.5 - 1,800 / 18 steps rpm Rapid traverse X-axis: Slide 4.2 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 180 mm Control voltage: 220 V Approx. machine weight: 3.25 t Approx. machine dimensions LxWxH: 3.5 x 1.2 x 1.6 m Thread cutting possible, e.g. metric threads, module threads, and inch threads Cross slide rapid traverse Nljdsu Ix Dcspfx Aarec Chuck guard 2x chip pans Accessories: (see comparable on photo) 2x steady rests (1x closed and 1x open) Face plate 3-jaw chuck Jaw sets Flange Centers various gears