Emma Atmosphärischer Füller nakup rabljenega (118)

Stanje: rabljeno, Zvezdni pogon z menjalnikom (servo motor) za Bertolaso polnilko/zapiralko Iedpfx Ajxyt N Asb Asib

Leto izdelave: 2020, stanje: novo, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information on Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function enables you to estimate the consumption and costs for each firing process. USB Storage Each firing process is logged, and the data can be transferred to a USB stick for evaluation on a PC. Each file is automatically generated and refers to a single firing process, recording extreme temperatures and precise timing. Files are saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this feature is free of charge. With other providers, this can cost several thousand euros. Iodpfsfzkqmsx Ab Aoib Storage of the Last 20 Firing Processes Something not right? Too few pieces after firing? You can now check the exact parameters of each firing process, such as its duration or whether any problems occurred. New! Timer Function It is possible to preset the operating start time so that the furnace can automatically switch on before the work shift begins. Made by Professionals for Professionals Automatic Smoke Extractor The smoke extractor can be programmed to open several minutes before the end of the firing process, allowing smoke to be drawn out of the chamber. It can also be controlled directly from the touch panel. Process Duration Timer Using heating dynamics, the system calculates the process duration and displays the end time of the firing process on the display. Self-Closing Doors To open, simply pull the door. To close, just push it—the door will close automatically. Exhaust Hood Over the Door (optional) To minimize heat loss to the hall when opening the door, an exhaust hood can be installed above the door to extract the hot air. Partition Wall (optional) The partition wall is suitable for large furnaces where only parts of the oven are to be used. The furnace is equipped with a movable partition and special controls. 2-in-1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying is done in the second chamber at the same time.

Leto izdelave: 2026, stanje: novo, Machining Centre Rumba – Processing length: 3,000 mm / 4,000 mm CNC-controlled machining centre with vertical machining spindle, suitable for processing extruded aluminium profiles, light metals, PVC, and steel from 3 sides. Controlled tilting work table: -90°/0°/+90° with intermediate angles. The machine is equipped with a 4 kW electrospindle, 18,000 rpm, inverter-controlled, and features a quick-change tool system (automatic tool changer) with ISO30 spindle. Interpolation of X, Y, Z, and W axes, controlled by the numerical control system. Brushless motors for X, Y, Z, and W positioning. Complete with 4 pneumatic double clamps, tool diameter compensation via software. Axis movements on linear guides. Left-hand profile stop. 10.4-inch color monitor (touchscreen with simplified Windows-based interface, Teamviewer for remote maintenance, special HICAM 2 / CAMPROX software for loading ISO files and running programs). Capable of processing longer parts. Standard equipment: - 4 kW electrospindle ISO30 - 4 pneumatic clamps (manually adjustable) - Safety guard - Automatic tool changer (10 tools) - 4x ISO30 cones, each equipped with a tool - 3x chip collection bins - Air nozzle Technical data: - X-axis travel: 3,000 mm / 4,000 mm - Y-axis travel: 400 mm - Z-axis travel: 300 mm - Rapid traverse (X, Y, Z): 50 m/min - Acceleration (X, Y, Z): 1.5 m/s² Electrospindle: 4 kW ISO30 / 6.6 kW HSK63 (optional) Spindle cooling: air cooling Max. tool length: 130 mm Max. tool diameter: 140 mm (saw blade) Operating pressure: 7 bar Iijdpfx Abjhywz Sj Aeb Weight: 2,500 kg You are welcome to inspect the desired machine in our production/showroom at any time. Please feel free to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Leto izdelave: 2026, stanje: novo, 5-axis CNC machining center for processing aluminum, steel, light metals, and PVC. The Bolero 5 features a heavy-duty machine bed. The machining spindle is a 17 kW (S6) electrospindle with HKS 63F taper. The maximum spindle speed is 24,000 rpm, controlled via a frequency inverter. The Bolero 5 comes equipped with an automatic tool changer and a 12-position magazine. The working area is fitted with 8 motorized clamps with automatic positioning, controlled by the CNC. The travel range of the X-axis is 7,000 mm (optional extension to a total of 9,400 mm). Pendulum machining is also available as an option. Operation is via a Windows PC with a 17" color screen. The machine is factory equipped with safety and protective features in accordance with EC directives. Iisdpfehy S Hmex Ab Asb You are welcome to view the machine at any time in our production/showroom. Please feel free to contact us to arrange an appointment. We look forward to your inquiry! Plantec Maschinen GmbH

Leto izdelave: 1995, stanje: skoraj kot novo (rabljeno), The bucket classifier is the ideal machine for recovering 0-4 mm sand, featuring low energy consumption and minimal maintenance requirements. - Throughput: 50 m³/h Isdpfxsu Avrts Ab Aeib - 5.5 kW motor.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, številka stroja/vozila: 99684 - 20204, Funkcionalnost: popolnoma funkcionalen, moč: 110 kW (149,56 KM), vrsta vhodnega toka: Klimatska naprava, višina obdelovanca (maks.): 3.000 mm, skupna širina: 1.800 mm, skupna masa: 35.000 kg, leto zadnje generalne obnove: 2010, teža obdelovanca (maks.): 35.000 kg, Capacity: 100 cubic meters/hour Iijdpfx Abou Aufls Aob EXCELLENT CONDITION – jaws need replacement

Leto izdelave: 1992, stanje: dober (rabljeno), Mechanisation for circular saw band saw system Iedsfd Ibvepfx Ab Ajib

Stanje: novo, Saw blade diameter: 600 x 30 mm Cutting capacity at 90 degrees: round 215 mm Cutting capacity at 90 degrees: square 195 x 195 mm Cutting capacity at 90 degrees: flat 140 x 395 mm Cutting capacity at 45 degrees: round 170 mm Cutting capacity at 45 degrees: square 170 x 170 mm Cutting capacity at 45 degrees: flat 100 x 175 mm Speed: 2800 rpm Total power requirement: 3.0 kW Machine weight: approx. 310 kg Dimensions (L x W x H): 1077 x 1214 x 1558 mm Features: - Semi-automatic high-performance circular saw (UNDER-TABLE design) * For cutting from 0° to 180° to the right and left * Suitable for aluminium and light metal alloys * With rising saw blade * Exceptionally large cutting range (saw blade ø 600 mm) * Digital display for angle adjustment 0° - 180° - Manually operated safety hood - Hydro-pneumatic saw blade feed (via two-hand control) - 2x pneumatic vertical vices with quick adjustment - Heavy cast iron construction for vibration-free operation and maximum precision - Large rotating table with internal indexing at 0°/45° * Allows rapid adjustment for mitre cuts - Extraction port for connection to a chip extraction system - Pneumatic spray unit for blade cooling and lubrication - Machine stand - Powerful saw drive with 3-phase motor, 3 HP Iisdpjxaccfofx Ab Ajb Scope of delivery: - 1x carbide-tipped saw blade, ø 600 mm - Air blow gun - Full protection cover - Tool kit - Detailed operating and maintenance manuals, etc.

Stanje: novo, Saw blade diameter 0 x 30 mm Cutting capacity at 90 degrees: round 130 mm Iijdpfx Aoxaa Husb Aeb Cutting capacity at 90 degrees: square 125 x 125 mm Cutting capacity at 90 degrees: flat 190 x 100 / 230 x 50 mm Cutting capacity at degrees: round 110 mm Cutting capacity at degrees: square 95 x 95 mm Cutting capacity at degrees: flat 130 x mm Speed 2800 rpm Mitre cuts -/+ degrees Total connected load 2.2 kW Machine weight approx. 2 kg Dimensions (LxWxH) 1600 x 750 x 1000 mm Equipment: - Semi-automatic high-performance circular saw (UNDERFLOOR DESIGN) * for cuts from ° right to ° left * for aluminium and light metal alloys * with upward-moving saw blade - Manually operated safety cover (optional with pneumatic opening) - Hydro-pneumatic saw blade feed (via two-hand operation) - Heavy cast iron construction ensures vibration-free operation and maximum precision - Large bearing-mounted rotary table with internal indexing at 0/° * Enables quick adjustment for mitre cuts - Extraction port for connection to chip extraction system Scope of delivery: - 2x pneumatic vertical clamps with quick adjustment - Tool set - Comprehensive operating and maintenance manuals - Air blow gun - Machine is supplied without saw blade!

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1989, • Max blade width: 400 mm Ijdpfxeif Ah He Ab Asib • Max cutting height: 140 mm • Motor: 132 kW • Centering device

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: N1A665853, teža orodja: 30.000 g, vhodna napetost: 400 V, Machining Center Rumba – 4-Axis Machining length: 4000 mm CNC controlled machining center with vertical spindle, suitable for processing extruded aluminum profiles, light metals, PVC, and steel from 3 sides. CNC-controlled tilting work table: -90°/0°/+90° with intermediate angles. The machine is equipped with a 4 kW electrospindle, 18,000 rpm, inverter-controlled, with rapid tool change (tool changer) and ISO30 spindle. Numeric control for X, Y, Z, and W axes interpolation. Brushless motors for X, Y, Z, and W axis positioning. Includes 4 double pneumatic clamps, software-based tool diameter correction. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touchscreen with simplified graphics based on Windows system, Teamviewer for remote maintenance, specialized HICAM 2 / CAMPROX software for loading ISO files and running programs). Capable of machining longer parts. Standard equipment: - 4 kW ISO30 electrospindle - 4 pneumatic (manually adjustable) clamps - Safety guard - Automatic tool changer (10 tools) - 4x ISO30 taper sleeves with tool included - 3x chip collection bins - Air nozzle Technical data: - X axis stroke: 3000 mm / 4000 mm - Y axis stroke: 400 mm - Z axis stroke: 300 mm - Rapid traverse (X, Y, Z): 50 m/min - Acceleration (X, Y, Z): 1.5 m/s² Iisdpfx Abswgm Ibj Aob Electrospindle: 6.6 kW HSK63 Spindle cooling: Air and liquid cooling Max. tool length: 130 mm Max. tool diameter: 140 mm (saw blade) Operating pressure: 7 bar Weight: 2500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Multi-blade saw MEM Cobra 2MT - 2 movable couplings - Hydraulically floating saws - 2 motors, 30 kW each Ijdjmv H Dqepfx Ab Asib - Cutting height: 100 mm - Cutting width: 900 mm - 2 hydraulic pumps: 15 kW and 7.5 kW - Electronic control - 4 line lasers - High efficiency - Weight: approx. 8,000 kg

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 1.246 h, Funkcionalnost: popolnoma funkcionalen, Ponujamo batno polnilko znamke Frey K-2/30, letnik 2017, z novo dodatno opremo, v dobrem rabljenem in delujočem stanju. Pogonski menjalnik za zavijanje ima nova ležišča. Naprava za držanje čreva ni vključena v ceno. Naprava deluje na 400 voltov, v celoti iz nerjavnega jekla, LCD 3 upravljanje, programabilna, 30-litrska prostornina za polnjenje, deljenje in zavijanje, servisno pregledana, takoj pripravljena za uporabo. Dimenzije D/Š/V: 60/70/115 cm. Isdpfew Tm E Eox Ab Aoib Dodatne fotografije na zahtevo. Plačilo z gotovino ali predplačilom! Prodaja samo podjetjem, brez garancije, brez jamstva.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 120 mm, največja širina rezanja: 1.000 mm, največja hitrost vrtenja: 3.000 obr/min, premer diska: 400 mm, MEM Cobra lite robilnik. V dobrem stanju 2 pomični osi 18,5 kW Fiksna os 37 kW ali 11 kW Isdpfjx Tzkksx Ab Aoib Priloženo več novih rezil.

Leto izdelave: 2020, stanje: novo, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information on Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function enables you to estimate the consumption and costs for each firing process. Iiedpfx Aofz Apqsb Ajb USB Storage Each firing process is logged, and the data can be transferred to a USB stick for evaluation on a PC. Each file is automatically generated and refers to a single firing process, recording extreme temperatures and precise timing. Files are saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this feature is free of charge. With other providers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Something not right? Too few pieces after firing? You can now check the exact parameters of each firing process, such as its duration or whether any problems occurred. New! Timer Function It is possible to preset the operating start time so that the furnace can automatically switch on before the work shift begins. Made by Professionals for Professionals Automatic Smoke Extractor The smoke extractor can be programmed to open several minutes before the end of the firing process, allowing smoke to be drawn out of the chamber. It can also be controlled directly from the touch panel. Process Duration Timer Using heating dynamics, the system calculates the process duration and displays the end time of the firing process on the display. Self-Closing Doors To open, simply pull the door. To close, just push it—the door will close automatically. Exhaust Hood Over the Door (optional) To minimize heat loss to the hall when opening the door, an exhaust hood can be installed above the door to extract the hot air. Partition Wall (optional) The partition wall is suitable for large furnaces where only parts of the oven are to be used. The furnace is equipped with a movable partition and special controls. 2-in-1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying is done in the second chamber at the same time.

Stanje: rabljeno, Leto izdelave: 2003, Overview This rinser-filler-capper monoblock was manufactured by Kosme in 2003. The unit is designed for filling carbonated and non-carbonated beverages into PET bottles. It consists of a rinser with 2 channels, an isobaric pressure filler, and a capper for plastic screw caps. The machine is currently available for immediate delivery. Technical Specifications - Capacity: 10,000 bottles per hour - Formats: 1.0 l PET bottles, 0.5 l PET bottles, 0.33 l PET bottles - Running direction: Clockwise Rinser Features: - 36 rinsing stations - 2-channel rinser - Stainless steel rinsing lines Filling System: - Isobaric system - 36 filling valves Capping System: - Manufacturer: Arol - 9 capping heads - 2 cap chutes, 1 for 28 mm plastic caps, 1 for sports caps Dimensions (approx.): 4,100 x 3,000 x 4,000 mm Scope of Delivery - Rinser, filler, capper in triblock configuration - Vacuum barrier system - Stainless steel CIP sleeves - Cap feeding system Ijdpfx Abowiy Tvo Aoib

Stanje: rabljeno, Leto izdelave: 2022, Overview The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used for bottling sparkling wine in cylindrical bottles ranging from 0.2L to 1.5L. It is equipped with a rinser (air or water), 16 nozzles, 24 electropneumatic filling valves, and 3 capping turrets (with 3 capping heads each). Each capping turret features its own closure feeding and delivery system. A cork dedusting unit is installed. The machine includes an integrated overpressure hood with pre-filters and absolute filters. This unit is sold together with an automatic CIP system and 2 pallet microfiltration units from Win&tech. The machine remains in production and can be inspected. Condition is like new, having only 200 operating hours. Technical specifications Operating direction: left to right Output: - 0.187L – 4,500 bph at 4°C & 15°C - 0.375L – 4,500 bph at 4°C & 15°C - 0.750L – 4,000 bph at 4°C & 2,900 bph at 15°C - 1.500L – 2,000 bph at 4°C & 1,500 bph at 15°C Currently set up for: Iijdpfxov Aag Do Ab Asb Glass bottles: 0.187L, 0.375L, 0.750L, 1.500L Closures/corks: natural cork (boucheuse liège), screw cap, decorative closure (Champagne-style) Includes CIP and wine filtration

Stanje: rabljeno, Leto izdelave: 2004, Overview (H2) Iiedpfx Ajwiu Nlob Asb This low-pressure vacuum filler was manufactured by MBF in 2004. The machine was in operation until 2017 and was fully functional at the time it was decommissioned. It was replaced due to increased demand for carbonated products, which required a different filling principle (counter-pressure). Since then, the machine has been stored dry and protected, with only minimal dust present. It is available for sale immediately. Technical Data (H3) Capacity: 6,000 bph (1.0 l bottles) 7,000 bottles per hour (0.75 l bottles) Bottle diameter: 55-120 mm (infinitely adjustable via infeed/outfeed starwheels) Bottle height: 150-370 mm Number of filling valves: 36 Filling principle: Low-pressure vacuum filling Operating direction: Left to right Type of filling valve: Electropneumatic Special Features: - Programmable bottle parameters with automatic adjustment of bottle and filling height - Hot filling capability with automatic shutdown in case of temperature deviation - Automatic speed adjustment depending on bottle infeed - CO₂ pre-flushing of bottles - Inert gas blanketing possible in the filling tank - Automatic level regulation depending on product temperature - Automatic wine changeover via CIP tray - CIP dummies and semi-automatic cleaning program - Remote maintenance modem - Complete documentation (spare parts list, wiring diagram) - Central electric fill-level adjustment Scope of Delivery - MBF Fillmatic 36LV filler - CIP dummy bottles - CIP tray - Tele-modem - Complete documentation (electrics and spare parts)

Stanje: rabljeno, Leto izdelave: 2010, Overview This semi-automatic pouch filling machine was manufactured in 2010 by AIT. The machine is for sale because it is no longer in use by the seller. It is suitable for filling liquid and semi-liquid products into doypack pouches with screw caps. Thanks to its simple and user-friendly interface, the AIT DOYPACK is ideal for small to medium production volumes. The machine is available immediately. Technical Specifications - Output: Up to 600 pouches/hour (depending on product viscosity and pouch format) - Volume range: 0.5L - 3L - Pressure: Min. 6 bar - Pouch type: Doypack with screw cap - Filling principle: Gear pump with high-precision flow meter - Operation: Semi-automatic (manual pouch positioning, automatic filling and capping) - Frame: Stainless steel - Cleaning/Sterilization: Integrated cleaning and sterilization functions - Control panel: Touchscreen Scope of Delivery - AIT DOYPACK semi-automatic filling and capping machine Iiedpswiu Hksfx Ab Aeb - Integrated gear pump and flow meter - Touchscreen control panel

Stanje: rabljeno, Leto izdelave: 1999, Overview This PET filler was manufactured by KRONES in Germany in 1999. It is suitable for bottling carbonated soft drinks in PET bottles and features a pick & place neck handling system. The machine is immediately available and can be inspected upon request. Technical Data Output: - 27,000 bph with 1.0l PET - 25,000 bph with 1.5l PET - 22,500 bph with 2.0l PET Bottle Formats: 1.0l, 1.5l, 2.0l PET bottles Closures: PCO 1881, plastic screw caps Filling System: Isobaric Number of Filling Valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running Direction: Right-to-left (counterclockwise) Neck Handling: Pick & Place system Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Pitch Circle: 144 Machine Safety: Full enclosure – elevator version Control System: Siemens S7 Scope of Supply - KRONES Sensometic VP-I-PET filler Iiedpewiizpofx Ab Aob - Alcoa screw capper (720-18-126) - KRONES Checkmat pick & place neck handling system - Integrated foam control system - Neumo shut-off valves

Stanje: rabljeno, Leto izdelave: 2015, Overview The Kosme / Krones Barifill is an isobaric filler currently operating in a German brewery, where it can be seen in action. The machine was manufactured by Kosme in 2015 and installed in 2016. It has a maximum capacity of 8,000 bottles per hour, with a rated speed of 7,000 bph as specified by the manufacturer. The system is designed for 26-mm crown caps and is equipped with 30 filling stations. Technical data Capacity: 8,000 bottles/hour (for 0.33-liter bottles) Closure type: 26-mm crown caps Formats: 0.5 NRW 0.5 Longneck 0.5 Lochmund 0.33 ALE 0.33 SUD 0.33 Steinie Swing-top Filling stations: 30 Electrical specifications: Max. voltage: 3x400 V + N + GND 50Hz Power consumption: 13.00 kW Operating hours: 18,393 (as of March 2025) Included spare parts: Drives Gearboxes Cardan shaft Others Annually serviced by Kosme/Krones Lifting cylinders replaced in 2024 Valves and cappers scheduled for 2025 Features: Bottle shower High-pressure injection for foaming Bottle stop Table rinsing station Crown cap container Iiodpfx Ajv Ic Uzeb Ajb

Stanje: rabljeno, Leto izdelave: 2002, Overview This isobaric beer filler was manufactured in 2002 by the German company KHS. The machine is designed for 500 ml glass bottles with crown corks and achieves an output of 44,000 bottles per hour. It has been used for filling beer at 10-12°C. The machine will be available from November 2025 and will remain installed until then. An on-site inspection can be arranged upon request. Technical Data - Capacity: 44,000 bottles per hour (500 ml glass bottles) - Formats: 500 ml glass bottles - Filling principle: Isobaric (mechanical filling system) - Number of filling stations: 144 - Capper: 24 stations (crown cork) - Operating voltage: 400 V - Frequency: 50 Hz - Control system: Siemens S7-400 - Control cabinet: Climate controlled, stainless steel - Operating hours: approx. 30,000 (as of Nov. 2024) - Rotation direction: Left to right Scope of Supply - Filler: KHS Innofill DMG SVF 144-KK24 - Crown cork capper with 24 stations - Control cabinet and operator panel - Bottle transfer stars - CIP cups - High-pressure injection (HDE) - Bottle rinsing station at the outfeed - Bottle table with roof design - Central lubrication system - VPN remote access capability - Safety enclosure (updated in 2016, with rinsing system) - Control panel - Cork feeding device by NSM - Fill level inspection system: Krones Checkmat (2015) Isdpfxowif Dgj Ab Ajib

Stanje: rabljeno, Leto izdelave: 2016, Overview This isobaric triblock filling machine was manufactured in 2016 by the Italian company Rizzolio. It is designed for filling carbonated beverages and combines rinsing, filling, and capping in a compact unit. The machine is still installed, can be connected to demonstrate its basic functions, and is for sale because the owner requires a larger brewhouse. Technical Data - Capacity: approx. 500–650 bph (bottles per hour) - Formats: - Bottle diameter: 30 to 120 mm - Bottle height: 140 to 350 mm - Closures: 26 or 29 mm crown caps - Filling type: Counter-pressure / isobaric Iijdpfowfh D Iex Ab Ajb - Rinsing heads: 4 - Filling valves: 4 - Capping unit: 1 - Power rating: 0.75 kW - Voltage: 240V, 50Hz, single-phase Approximate dimensions: - Length: 1370–1410 mm - Depth: 640 mm - Height: 2100 mm

Stanje: rabljeno, Leto izdelave: 1991, Pregled Ta izobarična PET-polnilna in zapiralna linija je bila izdelana leta 1991 pri nemškem podjetju SEN AG (Seitz Enzinger Noll AG). Blok sistem vključuje stroj za zapiranje Zalkin za navojne pokrovčke in sistem za dovajanje pokrovčkov Gassner. Primerna je za polnjenje gaziranih brezalkoholnih pijač. Stroj ni več v proizvodnji, je pa še priključen. Tehnični podatki Polnilni in zapiralni blok sistem Število polnilnih postaj: 124 Število zapiralnih postaj: 20 Izobarični polnilni sistem primeren za gazirane brezalkoholne pijače Sistem zapiranja: Zalkin za navojne pokrovčke Sistem dovajanja pokrovčkov: Gassner Kapaciteta: 19.900/h pri 1,5 l Formati: 1,5 l PET in 0,5 l PET Smer: leva-desna Ijdpfx Abjy Scclj Aeib

Stanje: rabljeno, Leto izdelave: 1997, Pregled Ova rotaciona mašina za punjenje pod pritiskom proizvedena je 1997. godine od strane NATE. Model Veral 60-12 namenjen je za punjenje i zatvaranje piva i gaziranih napitaka u staklene boce. Mašina radi kao punilica pod pritiskom sa prethodnim vakumisanjem, čime se obezbeđuju stabilni uslovi punjenja za gazirane proizvode. U 2023. godini je potpuno remontovana, uključujući obnovu punila, zatvarača i vakuum pumpe. Mašina nakon rekonstrukcije još nije puštena u rad i pripremljena je za integraciju PLC-a i upravljačkog sistema (nisu uključeni u isporuku). Iodpfxjy Azrte Ab Asib Tehnički podaci Kapacitet: oko 20.000 boca na sat (500 ml) Formati: 0,5 l Long Neck / 0,66 l / 1,0 l Upotreba: punjenje piva i gaziranih napitaka Konfiguracija: 60 punila / 12 zatvarača Sistem punjenja: punjenje pod pritiskom sa prethodnim vakumisanjem Pritisak punjenja: oko 0,05 – 0,06 MPa Temperatura proizvoda: oko 1 – 7 °C Materijal: nerđajući čelik (AISI 304 / 316)