Durma Valjčna Stiskalnica Za Pločevino nakup rabljenega (98.514)

Stanje: novo, Condition: new Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €98,600 Leasing rate: €1,863.54 Bending length: 3,100 mm Max. bending capacity – structural steel: 16 mm Max. plate thickness without pre-bending at D=5x top roller: 16 mm Max. plate thickness without pre-bending at D=3x top roller: 13 mm Max. plate thickness without pre-bending at D=1.5x top roller: 16 mm Max. plate thickness with pre-bending at D=5x top rollers: 14 mm Max. plate thickness with pre-bending at D=1.5x top roller: 12 mm Top roller diameter: 300 mm Bottom roller diameter: 300 mm Side roller diameter: 240 mm Max. opening: 50 mm Working height: 1,140 mm Motor power: 18.5 kW Length: 5,310 mm Width: 1,660 mm Height: 1,140 mm Weight: 11,100 kg 4 rollers PLC Fully hydraulic drive of top and bottom roller (from 30 mm bending capacity for all four rollers) via planetary gearbox Hydraulic side roller adjustment with electronic synchronization Hydraulic bottom roller adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rollers Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE standards OPTIONS: Upper and side plate supports NC control Isdsynm Hfspfx Amuebb IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of nominal capacity Cone length may be max. 30% or must be more than 60% of the roller length Hardened rollers are recommended

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1998, vrsta upravljanja: NC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: Siemens, model krmilnika: Simatic OP7, število valjev: 4, premer spodnjega valja: 470 mm, premer zgornjega valja: 530 mm, premer stranskega valja: 400 mm, premer valja: 530 mm, dolžina valja: 3.100 mm, delovna širina: 3.000 mm, delovna višina: 2.000 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 65 mm, maks. debelina pločevine iz nerjavečega jekla: 50 mm, skupna masa: 40.000 kg, skupna dolžina: 6.000 mm, skupna širina: 2.900 mm, skupna višina: 2.900 mm, moč: 55 kW (74,78 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 4, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, zavrtljivi zgornji valj, Valjarna pločevine zmogljivosti 3000x50 mm, Davi model MCB3053 Hidravlični štirivaljni upogibni stroj za pločevino, letnik 1998 Iodpfx Aey D Ngzsmuobb Delovna širina pločevine: 3000 mm Debelina valjanja: 50 mm Pred-upogib: 40 mm Delovna širina na valjih: 3100 mm Velikost zgornjega valja: 530 mm Spodnji valj: 470 mm Stranska valja: 400 mm Moč: električna 70 KM na hidravlični enoti, napetost 380/50 Nameščena konfiguracija: - Kaljena površina vseh 4 valjev - Priključek za konično upogibanje – kaljen za upogib stožca - Električna konzola z digitalnim prikazom položaja valjev - Kontroler Siemens Simatic OP7 - NC programator za samodejno valjanje Hidravlični pogon osrednjih valjev z aksialnim menjalnikom Nastavljiv pritisk predstiskanja za pred-upogibanje roba pločevine Odprt sprednji konec (drop-end) za razkladanje zaprtih valjanih polovic Sistem za ponovno valjanje za kalibracijo okrogline zvarjenih plasti Nameščen varnostni in urgentni sistem Originalna navodila za uporabo in vzdrževanje Dimenzije: 6000x2900 x v 2900 mm, teža 40.000 kg

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity - structural steel: 9 mm Max. plate thickness without pre-bending at D=5x upper roll: 9 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 7 mm Max. plate thickness with pre-bending at D=5x upper roll: 7 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 5 mm Upper roll diameter: 180 mm Lower roll diameter: 180 mm Isdpjynmzpsfx Amujbb Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Leto izdelave: 2026, število valjev: 3, premer spodnjega valja: 110 mm, premer zgornjega valja: 110 mm, premer stranskega valja: 110 mm, dolžina valja: 1.070 mm, najv. debelina jeklene pločevine: 4 mm, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, – Kapaciteta 1070 x 4 mm – Električno nastavljiv zadnji valj – Digitalni prikaz gibanja zadnjega valja – Kaljeni valji – Konusno valjanje – Izvlečljiv zgornji valj – Zavorni motor Ibjdpeyv R T Tjfx Amusb – Nujna zaustavitev – Dokumentacija – 400V

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1992, številka stroja/vozila: 10842, Ponujamo rabljeni stroj za valjanje pločevine Chr. Häusler VRM-hy 3000x15, leto izdelave 1992. Tip: VRM-hy 3000×15 Serijska številka: WO 10842 Leto izdelave: 1992 Ijdox Sqc Topfx Amuebb Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: Siemens, model krmilnika: Smart Line, število valjev: 4, premer spodnjega valja: 190 mm, premer zgornjega valja: 210 mm, premer stranskega valja: 180 mm, najv. debelina pločevine: 8 mm, najv. debelina jeklene pločevine: 8 mm, moč: 11 kW (14,96 KM), vhodna napetost: 400 V, število digitalnih zaslonov: 1, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, nujno zaustavitev, DIGIMA W12-8x3200 – hidravlični stroj za valjanje pločevin s štirimi valji in numeričnim upravljanjem (CNC) Isdpeznw T Ujfx Amusbb DIGIMA W12-8x3200 je hidravlični stroj za valjanje pločevin s štirimi valji in numeričnim upravljanjem (CNC), zasnovan za natančno, ponovljivo in učinkovito obdelavo pločevin. Z delovno širino 3200 mm je primeren za proizvodnjo velikih cilindričnih delov, tulcev, cevi, ukrivljenih profilov, ohišij, rezervoarjev in drugih tehničnih komponent, ki se uporabljajo v obdelavi kovin, konstrukcijah iz jekla, prezračevalnih sistemih, proizvodnji strojev in industrijski proizvodnji. Sistem s štirimi valji zagotavlja veliko prednost pred običajnimi stroji s tremi valji. Pločevina je varno nameščena med zgornjim in spodnjim valjem, medtem ko izvajata stranska valja predhodno upogibanje in valjanje. Ta ureditev omogoča, da se oba roba pločevine predhodno upogneta, ne da bi bilo treba obdelovanec odstraniti in zavrteti, kar zmanjšuje čas obdelave in omejuje dolžino ravnih delov na koncih. Rezultat je izboljšana ponovljivost, višja produktivnost in bolj dosledna geometrija obdelovancev. W12-8x3200 lahko valja pločevino debeline do 8 mm in izvede predhodno upogibanje do 6 mm. Delovna dolžina 3200 mm omogoča obdelavo širokih pločevin za enkratne projekte in serijsko proizvodnjo. Zgornji valj ima premer 210 mm, spodnji valj 190 mm, stranska valja pa 180 mm. Najmanjši premer valjanja je 400 mm, kar omogoča stroju proizvodnjo širokega nabora cilindričnih in ukrivljenih komponent. Hidravlični pogon zagotavlja gladek, stabilen gib in zanesljivo sila pritrditve med celotnim procesom oblikovanja. Motor z močjo 11 kW zagotavlja moč, potrebno za redno industrijsko obratovanje, hitrost valjanja 4 m/min pa podpira učinkovito proizvodnjo brez ogrožanja nadzora procesa. Trdno ohišje stroja in skrbno razporejen sistem valjev pomagajo natančno voditi material in zmanjšujejo neželene deformacije. Računalniško voden nadzor (CNC) omogoča enostavno nastavitev in upravljanje stroja. Upravljavec lahko nadzoruje gibe valjev, spremlja proces oblikovanja in ponovi že vzpostavljene nastavitve za ponavljajoče se naloge. To je še posebej uporabno pri serijski proizvodnji, kjer je treba ponovno doseči enak premer, radij in dimenzije. Nadzorna plošča tudi pomaga skrajšati čas nastavitve in poenostavlja vsakodnevno upravljanje stroja. Postopek delovanja je preprost. Najprej se pločevina vstavi in stabilizira med valji. Nato stranska valja predhodno upogneta robove pločevine, kar zmanjšuje ravne konce. Na koncu se material prenaša skozi sistem valjev, dokler ne dobimo želenega oblika cevi, tulca, loka ali cilindra. Stroj se lahko uporablja tudi za oblikovanje koničnih komponent z uporabo nadzorovane nagiba valjev. Zahvaljujoč veliki delovni zmogljivosti in računalniško vodenemu upravljanju se lahko stroj uporablja v prilagodljivi delavniški proizvodnji kot tudi v organiziranih proizvodnih procesih. Primeren je za podjetja, ki proizvajajo prezračevalne kanale, konstrukcijske elemente, pokrove za stroje, rezervoarje, jeklene tulce in komponente po naročilu. Ponovljive nastavitve CNC so še posebej dragocene, ko je treba oblikovati več identičnih delov z enakim premerom in ukrivljenostjo.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, Four-Roll Plate Bending Machine Isdpfx Amjzguumousbb Make: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Technical specifications Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Lower roll diameter: 210 mm Side rolls diameter: 165 mm Bending force (against top roll): 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4.2 t Performance Data Rolling capacity (full width) mm: 12 Pre-bending capacity (full width) mm: 8 Min. diameter for pipes mm: 1,125 At material yield strength N/mm²: 260 Rolling capacity (full width) mm: 8 Pre-bending capacity (full width) mm: 6 Min. diameter for pipes mm: 295 At material yield strength N/mm²: 260 Rolling capacity (full width) mm: 8 Pre-bending capacity (full width) mm: 6 Min. diameter for pipes mm: 1,125 At material yield strength N/mm²: 360 Rolling capacity (full width) mm: 6.5 Pre-bending capacity (full width) mm: 5 Min. diameter for pipes mm: 295 At material yield strength N/mm²: 360 Rolling capacity (half width) mm: 15 Pre-bending capacity (half width) mm: 10 Min. diameter for pipes mm: 1,125 At material yield strength N/mm²: 260 Equipment - Double linear guide system for roll movement - Extra-wide bearing blocks - MCS dual-bearing system for roll rotation - Extra heavy, double-supported swing-out end bearing - Electronic parallelism system EPS - Hardened rolls for high wear resistance and minimal sheet marking - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop function, CE certified - Water cooler for the hydraulic unit All information subject to change. A powered demonstration is available anytime in our showroom.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Leto izdelave: 1963, številka stroja/vozila: 971W01002, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: električni, število valjev: 3, premer zgornjega valja: 400 mm, premer stranskega valja: 400 mm, dolžina valja: 3.000 mm, najv. debelina pločevine: 15 mm, Prodaja se rabljeni valjčni stroj HAEUSLER KRMA 3000 x 15. Proizvajalec: CHR. HAEUSLER AG, Švica. Delovna širina 3000 mm, nazivna debelina 15 mm, 380 V. Serijska številka 971W01002. Na tablici je navedeno leto 1963, kot tudi revizija/CE oznaka 2003. Stroj je namenjen za valjanje in upogibanje pločevine. Prodaja se v obstoječem stanju, ogled na kraju je priporočljiv. Stroj je opremljen tudi za upogibanje profilov. Ijdpezil Hfofx Amuebb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Akbend ASM140, valjar za upogibanje 3 valji zgornji valj, premer 140 mm Ibjdpfx Amezxtbvjueb dolžina 1250 mm x debelina 5 mm Leto izdelave 2007 Moč motorja 2,2 kW

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €49,900 Leasing rate: €953.09 Bending length: 2050 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness, pre-bending at D=5x top roll: 13 mm Max. sheet thickness, pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness, with pre-bending at D=5x top rolls: 10 mm Max. sheet thickness, with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1470 mm Weight: 5450 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, bottom roll drive by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic relief of the top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Ibodpfoyb Sydsx Amuob Equipment compliant with CE specifications OPTIONS: Stepless variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, številka stroja/vozila: plate roll Faccin, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 180 mm, premer zgornjega valja: 200 mm, premer stranskega valja: 160 mm, premer valja: 200 mm, dolžina valja: 2.050 mm, delovna širina: 2.000 mm, delovna višina: 700 mm, najv. debelina pločevine: 8 mm, najv. debelina jeklene pločevine: 8 mm, maks. debelina pločevine iz nerjavečega jekla: 8 mm, maks. debelina aluminijaste pločevine: 10 mm, maks. debelina medeninaste pločevine: 12 mm, najv. debelina bakrene pločevine: 12 mm, skupna masa: 3.700 kg, skupna dolžina: 3.500 mm, skupna širina: 1.100 mm, skupna višina: 1.000 mm, moč: 5,52 kW (7,51 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 3, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, STROJ ZA UPOGIJANJE PLOČEVIN FACCIN – 4 VALJNI, HIDRAVLIČNI, 2000 X 8 MM MODEL 2020B4, leto izdelave 2020, zmogljivost 2000 x 8 mm Valji za upogibanje, hidravlične linearne vodila. Stroj je v odličnem delovnem stanju. Zmogljivost upogibanja: - Širina pločevine: 2000 mm - Debelina upogibane pločevine: 8 mm - Debelina pločevine pri predhodnem upogibanju: 6 mm Dimenzije valjev: - Uporabna dolžina: 2050 mm - Zgornji valj: 200 mm - Spodnji valj: 180 mm - Stranski valji: 160 mm Ibedpszy Nv Eefx Amuob Električni motor 5,5 kW, napetost 400/50 V • Kaljenje 4 valjev za povečanje trdnosti površine. • Osrednji valji se poganjajo s hidravličnimi motorji in prestavami. • Stožčasta nastavitev za upogibanje, stranski valji se nagibajo za oblikovanje stožcev. • Sprednji, hidravlični odpiralni del za enostavno razkladanje upognjene konstrukcije. • Spremenljiva hitrost delovnega valja, hidravlična hitrost upogibanja: hitro/počasi. • Konzola z električnim upravljanjem na kolesih, osrednji nadzor z ročkami in 3 digitalnimi zasloni. • Digitalni zasloni za prikaz položaja valjev, ponovljivost upogibanja in predhodnega upogibanja. • Dimenzije: 3500 x 1100 x V 1000 mm – teža 3700 kg.

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €48,100 Leasing rate: €918.71 Bending length: 2,550 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roll: 9 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 5 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 4,600 kg 4-roll system Top roll drive via hydraulic motor and planetary gearbox, bottom rolls driven by gears and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of the top roll Hydraulic drop end 2 working speeds Overload protection Mobile control panel Equipment complies with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended Ibsdpjyb Sywjfx Amujb

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €46,300 Leasing rate: €884.33 Bending length: 2,050 mm Max. bending capacity – mild steel: 11 mm Max. plate thickness without pre-bending at D=5x top roll: 11 mm Max. plate thickness without pre-bending at D=1.5x top roll: 9 mm Max. plate thickness with pre-bending at D=5x top roll: 9 mm Ibodpfxoyb Szus Amusb Max. plate thickness with pre-bending at D=1.5x top roll: 7 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4,400 mm Width: 1,150 mm Height: 1,250 mm Weight: 4,080 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox; bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment compliant with CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of nominal capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 8.856 h, Funkcionalnost: popolnoma funkcionalen, delovna dolžina: 12.000 mm, Stiskalnica Ibjdpfx Amjxfg Sbjusb Obnovljena 12 m dolžine Vse brezhibno V delujočem stanju. Nahaja se na sedežu podjetja.

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €52,700 Leasing rate: €996.03 Bending length: 2550 mm Max. bending capacity – structural steel: 10 mm Max. sheet thickness without pre-bending at D=5x top roll: 10 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4800 mm Width: 1600 mm Height: 1470 mm Weight: 6170 kg 4 rollers Ibedpfeyb Sykex Amueb Top roll drive via hydraulic motor and planetary gearbox; bottom roll driven via gears and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for position of bottom and side rolls Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment conforms to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the rated capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,000 Leasing rate: €1,077.30 Bending length: 2,550 mm Max. bending capacity - structural steel: 13 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,800 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Ibjdpfx Ameyb Sy Rjuob Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll relief Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulation OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Maximum plate thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €55,900 Leasing rate: €1,056.51 Bending length: 3,100 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roller: 8 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 7 mm Max. sheet thickness with pre-bending at D=5x top roller: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 5 mm Top roller diameter: 245 mm Bottom roller diameter: 245 mm Side roller diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,850 kg 4 rollers Top roller drive via hydromotor and planetary gearbox, bottom roller drive via gear and cardan shaft Hydraulic adjustment of bottom and side rollers Digital readout for bottom and side roller positions Hardened rollers Cone bending device Hydraulic relief for top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel CE-compliant equipment OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control Ibedpsyb Sz Iefx Amusb IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2550X10.14MM, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: mehanski, število valjev: 3, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, premer valja: 400 mm, dolžina valja: 2.550 mm, delovna širina: 2.500 mm, delovna višina: 800 mm, najv. debelina pločevine: 14 mm, maks. debelina pločevine iz nerjavečega jekla: 10 mm, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, Oprema: centralizirani mazalni sistem, naprava za krivljenje stožcev, nujno zaustavitev, zavrtljivi zgornji valj, 3-valjna stroj za upogibanje pločevine 2500x14 mm Model OMCCA ITALIJA ZMOGLJIVOSTI širina pločevine 2500 mm debeline pločevine 14 mm pred-upogib 10 mm --- Uporabna širina valjev 2550 mm Zgornji valj premer 300 mm Stranska valja premer 280 mm Kaljena površina vseh 3 valjev Centralizirana pogonska enota, pogon stranskih valjev Odpiranje: spredaj, hidravlični izmet za razklad zaprte školjke Podaljšane gredi za namestitev dodatnih orodij za profilno upogibanje Spremenljiva hitrost valjanja do 5 m/min Elektromotor 20 KM na hidravlični enoti Krmilna konzola z električnimi gumbi Ibsdpfxey Aubuj Amusb Kazalec položaja valjev – številčnica Varnostne naprave z izrednim izklopom

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roller: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 10 mm Max. sheet thickness with pre-bending at D=5x top rollers: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 8 mm Top roller diameter: 220 mm Lower roller diameter: 200 mm Side roller diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,600 kg 4-roll design Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll lifting Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely variable roll speed Ijdpfxsynmx Ij Amusbb Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity – mild steel: 10 mm Max. plate thickness without pre-bending (at D = 5x top roll): 10 mm Max. plate thickness without pre-bending (at D = 1.5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 1.5x top roll): 6 mm Top roll diameter: 200 – 220 mm Lower roll diameter: 200 – 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gears and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations Iedpjynmyfofx Amuebb OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be a maximum of 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, Max. bending diameter: Ø 76 mm Max. tube wall thickness: 3.0 mm Max. bending length: 6000 mm Min. bending angle: 0.1° Max. bending angle: 190° Max. bending radius: 260 mm Operating speed Rotation speed: 200°/second Bending speed: 30°/second Feed speed: max. 1000 mm/second Tolerances: Rotation (°): ±0.1° Bending (°): ±0.1° Feed (°): ±0.1° Hydraulic system: Hydraulic motor power: 7.5 kW Max. hydraulic pressure: 180 bar Hydraulic oil capacity: 120 liters Rated power: 44 kW Voltage: 400 V AC Dimensions LxWxH: 8900 x 1200 x 1850 mm Weight: 4850 kg Description: Materials: Steel | Stainless steel | Aluminium | Brass | Copper | and other ductile materials – for simple to complex shapes Display: Portable 15-inch color touchscreen monitor Ibjdpfx Aoyr N Eremuob Control panel: Servo and hydraulic motion control, with selectable servo axis speed Foot pedal User-friendly AKYAPAK control software Hydraulic system: Bosch, Parker Operating modes: manual, semi-automatic, and fully automatic Programming: Y-B-C or X-Y-Z mode Cooling system: Hydraulic oil cooler Tube clamping: hydraulic Industrial PC: Pentium processor, 256 MB RAM, hard drive and floppy disk drive Lubrication system: automatic Control: PLC-based Rotary axis: servo-driven Bending system: hydraulic Auxiliary axes: hydraulic Forward and reverse movement: manual Tube length calculation: automatic, per program Workpiece display: 3D 360° graphic display

Stanje: novo, Ostas 4-valjni okrogli upogibni stroj 4R OHS 3070 x 250 Hidravlično pomikanje stranskih valjev 3 digitalni prikazovalniki Hidravlično zložljivo ležišče Ijdpfx Ajyaqmaomuobb Kaljeni valji Naprava za konusno upogibanje Posebna upravljalna konzola Dolžina valjev: 3070 mm Premer zgornjega valja: 250 mm Premer stranskih valjev: 200 mm Skupna moč motorjev: 7,5 + 1,5 kW Teža: 9800 kg Dimenzije (mm): 5050 x 1550 x 1470 (D x Š x V) Podatki o zmogljivosti upogibanja 9 mm pri najmanjšem notranjem premeru (5 x zgornji valj) 7 mm pri najmanjšem notranjem premeru (1,5 x zgornji valj) Podatki o zmogljivosti pred-upogibanja 7 mm pri najmanjšem notranjem premeru (5 x zgornji valj) 5 mm pri najmanjšem notranjem premeru (1,5 x zgornji valj) Vse zmogljivosti upogibanja so izračunane na osnovi meje tečenja 250 N/mm2 Material (ST 37 – ST 42 konstrukcijsko jeklo)

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €60,600 Leasing rate: €1,145.34 Bending length: 3,100 mm Max. bending capacity (mild steel): 10 mm Max. sheet thickness without pre-bending at D = 5x top roller: 10 mm Max. sheet thickness without pre-bending at D = 1.5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 1.5x top roller: 6 mm Top roller diameter: 260 mm Bottom roller diameter: 260 mm Side roller diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,550 mm Weight: 7,685 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, bottom rollers driven by gear drive and cardan shaft Hydraulic adjustment of bottom and side rollers Digital display for bottom and side roller positions Hardened rollers Cone bending device Hydraulic release of the top roller Ijdpfjynm D Rjx Amuobb Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: Maximum sheet thickness is 50% of the rated capacity Cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1992, številka stroja/vozila: 11/10575, delovna širina: 3.000 mm, najv. debelina pločevine: 16 mm, TEHNIČNE PODROBNOSTI Širina pločevine: 3.000 mm Debelina pločevine: 16 mm Ibodpfszapqwox Amueb Upravljanje: konvencionalno PODROBNOSTI O STROJU Nazivni tok: 63 A Napetost: 380 V

Stanje: rabljeno, Leto izdelave: 2019, skupna dolžina: 5.100 mm, skupna širina: 2.300 mm, skupna višina: 2.400 mm, Teža: 10.470 kg S pnevmatsko podporo pločevine - Leto izdelave: 2019 - Dokumentacija na voljo: Ne - CE oznaka prisotna: Da - CE certifikat: Ne - Serijska številka: 6922191908 - Krmiljenje: CNC - Pogonski sistem: Hidravlični - Moč [kW]: 11,0 - Maks. debelina pločevine [mm]: 6 - Maks. delovna širina [mm]: 4100 - Globina naslona [mm]: 1000 - Transportne mere: 5100mm x 2300mm x 2400mm (d x š x v) - Transportna teža [kg]: 10.470 kg - Transportnih paketov [kos]: 1 Finančne informacije DDV: Navedena cena je brez DDV DDV/obračun razlike: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vse iz industrijskega področja Isdpfx Aow E H Sqomuobb Lukas van Rossum