Doosan Stroj Za Rezkanje Odmičnih Gredi nakup rabljenega (92.331)

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Ljdpfxjt Hw D Rj Aamjhi Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1977, Maximum wheel diameter: 400 mm Wheel width: 280 mm Module - min.: 1 Module - max.: 4 Total power requirement: 15 kW Machine weight: approx. 6,000 kg Space required: approx. ___ m L O R E N Z Universal Gear Hobbing Machine Model: F 400 Year: 1977 Serial No.: 8687 Wheel diameter min./max.: 400 mm Module range: 1 - 4 Number of teeth approx.: 8 – 210 Hobbing width approx.: 280 mm Maximum workpiece installation length approx.: 450 mm Swivel range of hobbing slide: up to 60° Cutter size (diam. x length): 160 x 220 mm Maximum cutter shift: 180 mm Cutter speeds: 125–500 rpm Table diameter x bore: 375 x 80 mm Feed ranges: axial 0.31 – 4.00 mm/rev radial 0.12 – 1.60 mm/rev tangential 0.035 – 4.5 mm/min Hob spindle drive approx.: 8 kW Total drive approx. max.: 15 kW – 380 V – 50 Hz Weight approx.: 6,000 kg Lhedpjt Hw Hxefx Aamji Accessories / Special Equipment: • Various selectable hobbing programs for climb and conventional cutting, and for radial/axial processes, possibly for worm hobbing • Universal hobbing head with cutter shift • Hydraulic workpiece clamping in table and hydraulic tailstock • Hydraulically swiveling counter-holder connection for easier loading • Differential for helical gearing • Stepless speed adjustment, speed and ampere display • Change gears, various accessories, coolant system • Very robust construction Condition: good – to be demonstrated shortly Delivery: ex-stock – as inspected Payment: upon receipt of invoice, strictly net

Stanje: rabljeno, Leto izdelave: 1995, Wheel diameter – max. 80 mm Wheel width 120 mm Module – max. 3 Module – min. 1 Control unit SIEMENS 840 C Total power requirement 30 kW Machine weight approx. 7,500 kg Space requirement approx. ___ m LIEBHERR CNC-controlled gear hobbing machine Model LC 82 Ledpfot Hw R Dsx Aamehi Year of manufacture 1995 # 0836 _____ Max. wheel diameter: 80 mm Module: 1 – 3 Helix angle: +/- 45° Distance from table center to tool center: 15 – 160 mm Vertical travel of milling slide: 250 mm Shifting/Tool traverse path: 180 mm Min. number of teeth: 3! Cutter diameter x length approx.: 90 x 200 mm Cutter speeds up to max.: 800 rpm Feed rates (axial/radial/tangential): 20/4/5 mm/rev Maximum workpiece clamping length: 250 mm Spindle drive approx.: 8 kW Total drive approx.: 30 kW – 400 V – 50 Hz Total weight approx.: 7,500 kg Accessories / Special features • SIEMENS CNC control system Type 840 C for 6 axes (i.e., cutter drive / table drive / swiveling angle of milling head / axial feed / radial feed / tangential feed), with gear-cutting-specific operator interface and diagnostic functions for fast troubleshooting. • Equipped for automatic threading of the hobbing cutter into the tooth gap • Automatic shifting of the cutter axis • Automatic workpiece loading system SSL = rapid-swing loader with mechanical step gearing and cam disk for fast loading cycles. Features triple rotary gripper for blank picking / machining position / unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinion) • Workpiece feed is via a plate-chain conveyor (PKB) for transporting workpieces with frictional engagement using workpiece carriers. Additional conveyor belt for blanks and finished parts • Chip conveyor, complete working area enclosure, intermediate coolant tank with pump Complete enclosure of the working area with sliding door and oil mist extraction, etc. Machine can also be used for dry gear cutting. Condition: satisfactory to good – under power and ready for demonstration, compact construction! Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1980, Milling length 1750 mm Milling width 260 mm Module – max. 10 Module – min. 12 Total power requirement 8 kW Machine weight approx. 4500 kg Space requirements approx. m D O N A U – K N A P P Universal Rack Milling Machine Model UZFM - V 300 H Year 1980 # 80-234x _____ Max. gear cutting length 1,750 mm Milling travel/crosswise milling width max. 260 mm Helical gearing up to 30° Module range steel/cast iron max. 10 to 12 Effective table clamping surface 275 x 1,830 mm Mounting height under milling spindle axis min./max. 150 / 430 mm Lhjdpfjt Hxagjx Aamei Cutter diameter min. / max. Ø 108 + 2 x cutting depth / max. 165 mm Cutter width max. unsupported / with counter bearing 50 / 140 mm Cutter arbor diameter max. 22 - 50 mm 9 spindle speeds 29 – 178 rpm Milling slide swivels right / left 30° Milling spindle head swivels right / left 30 / 45° Infinitely variable feeds (milling slide) 0 – 600 mm/min Rapid return 2,000 mm/min Milling spindle drive approx. 4 kW Total power requirement 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special equipment: • Automatic milling cycle control via cam plate on the milling head slide and on the table slide, with the possibility of skip control (automatic bypass of non-milling sections) and pendulum milling operation (synchronous milling on one table half and workpiece change on the other table half) • Hydraulic workpiece clamping device continuous approx. 260 x 1800 mm, clamping width max. 140 mm, clamping height approx. 60 mm, with separate hydraulic unit and electric actuation • Manual fine adjustment of the table (0.001 mm), e.g. for precise insertion into a pre-milled gear profile • Various change gears (approx. 10 pcs), 2 cutter arbors, central lubrication with pulser, built-in hydraulic system, separate coolant unit, separate control cabinet, various used rack milling cutters Price, ex stock plus VAT € 49,500.-- This machine is especially suitable for milling racks as well as for making broaching tools (back milling by swiveling the milling head). Condition : very good – ready for demonstration Delivery : ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1985, Drilling capacity in steel (diameter): 30 mm X-travel: 850 mm Y-travel: 435 mm Control: HEIDENHAIN TNC 150 Total power requirement: 16 kW Machine weight approx.: 3,500 kg Space requirement approx.: m F E H L M A N N (Switzerland) CNC-controlled precision drilling and milling machine Model: PICOMAX 100 CNC – 2+ Am Year of manufacture: 1985 16 085109 X-axis (longitudinal): 850 mm Y-axis (lateral): 435 mm Z-axis (vertical): 210 mm Table size: 500 x 1,570 / 390 x 1,280 mm Min./Max. distance vertical spindle - table top: 140 / 690 mm Vertical adjustment of the drill head (motorized): 540 mm Spindle overhang: approx. 450 mm Spindle mount: SF 32 Drilling capacity in steel: 30 mm Vertical spindle stroke (quill): max. 210 mm Spindle speeds (infinitely variable, 2 ranges): 25 – 5,600 rpm Ledpfxet Hxa He Aamohi Workpiece weight: 600 kg Feed rates XYZ: 1 - 8,000 mm/min Drilling feeds, 6 automatic: 0.03/0.07 to 0.4 mm/min Rapid traverse XYZ: 4/8 m/min Spindle drive: 6 kW Total drive approx.: 16 kW - 380 V - 50 Hz Weight approx.: 3,500 kg Accessories / special equipment: • HEIDENHAIN CNC 2-axis contouring control, type TNC 150, with color monitor, graphics, all standard subroutines and cycles, tapping cycles, manual control unit or electronic handwheel, RS 232 interface, etc. The drill spindle axis (Z) can be operated manually or via CNC control. • Drilling depth can be preset via a 12-position turret stop, with digital display on the monitor. • Drill head can also be programmed via a height positioning device in 3 preset positions. • Precision coordinate table for X/Y CNC axes with hardened ball screws • Equipped with quick-change tool system, various tool holders, drill chucks, coolant system, etc. Condition: good to very good – demonstrated under power Delivery: ex-stock, as inspected Payment: strictly net, upon receipt of invoice

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter - max. 0 mm Number of teeth - max. 0 Module - max. Module - min. Lhjdpfx Ast Hwv Hoamoi Total power requirement kW Machine weight approx. t Space requirement approx. m CNC-controlled synchronizer ring milling machine ideal for synchronizer rings, BWO control 785 H

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Ledpfx Ajt Hwxbeamshi Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories

Stanje: rabljeno, Leto izdelave: 1979, Wheel diameter - max. 350 mm Wheel width 350 mm Module - max. 8 Module - min. Total power requirement 7.5 - 22 kW Ljdpjt Hwxzofx Aamjhi Machine weight approx. t Space requirement approx. m Gear hobbing machine with slotting device, 2-cut, broaching slotting device, without hydraulic unit

Leto izdelave: 1975, stanje: rabljeno, Wheel Diameter – max. 280 mm Number of Teeth – max. 100 Module – max. 6 Module – min. 1 Total Power Requirement: 6 kW Machine Weight: approx. 2,500 kg Space Requirement: approx. __ m H U R T H Automatic Gear Edge Milling Machine for universal use in deburring and chamfering gears Model: ZK 7 - Year of Manufacture: 1975 Serial No.: 26 000 _____ Max. Workpiece Diameter: approx. 280 mm Workpiece Length: approx. 200 mm Module Range for Deburring: 1-6 module for Simplified Shifting: 1-4 module Workpiece Tooth Count: 6 - 100 Workpiece Spindle Bore: 102 mm Horizontal Adjustment of Workpiece Head: approx. 340 mm Vertical Adjustment of Milling Slide: 180 mm Swiveling Range of Milling Slide: 105° Traverse Adjustment of Milling Slide: approx. 300 mm Cutter Speeds: 250-2,800 rpm Cutter Stroke Rates: 30–210/min Adjustable Cutter Stroke: 6–12 mm Milling Spindle Taper: 40 SK Total Drive: approx. 6 kW – 380 V – 50 Hz * Weight: approx. 2,500 kg Accessories / Special Equipment: • Electric workpiece clamping device with collet chuck setup, facility for expanding mandrels, and standard workpiece holder, extensive clamping devices included. Foot switch for clamp release. • Mechanical indexing device for tooth numbers, with approx. 20 different indexing plates • Adjustable tooth gap-centering device mounted on the workpiece head • Mechanical collet adapter installed on the tool head for various cutter diameters and types (profile/face/bell cutters, etc.), approx. 50 various used and new cutters included. • Hydraulic working stroke of tool spindle towards the workpiece, with integrated hydraulic unit. • Workpiece counter Condition: Good – demonstration-ready, very interesting due to extensive accessories. Delivery: ex stock – as inspected * Payment: strictly net – upon receipt of invoice We look forward to your order. Approximately 100 different gear cutting machines are still available in stock for selection. Please inquire with us. Lhodst Hw Dkspfx Aamoi

Stanje: rabljeno, Leto izdelave: 1967, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 150:10486, premer zobnika: 150 mm, skupna višina: 1.400 mm, skupna širina: 800 mm, premer obdelovanca (maks.): 150 mm, največja hitrost vretena: 1.000 obr/min, hitrost vretena (min.): 112 obr/min, skupna masa: 1.300 kg, premer orodja: 50 mm, Na prodaj je preverjen stroj za rezkanje zobnikov Koepfer 150. Stroj je idealen za gospodarno izdelavo cilindričnih zobnikov, zobčnih koleščkov in drugih zobničenj tako v posamezni kot v serijski proizvodnji. Lhjdpfx Aezfhyysamoi

Stanje: rabljeno, Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 110001, Sale of SACEM boring and milling machine for machining large workpieces. The machine is in full working condition and is currently in use for ongoing production—primarily for reworking operations. It is especially suitable for machining large and cumbersome components. Weight: 10 t Voltage: 380 V, 50 Hz Connected load: 20 kW Compressed air: 3.5 – 6 bar Spindle speed: 4 – 1,600 rpm Feed rate: 3 – 2,500 mm/min Tool holder: SK40 Drilling depth / spindle stroke: 800 mm Travel distances: x axis: 900 mm y axis: 900 mm z axis: 1,200 mm Clamping surface: 1,000 x 1,200 mm Max. workpiece weight: 4,000 kg Accuracy: 0.02 mm Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users / manufacturing companies (no resale to traders)—suitable company profile required Lodpsxbn A Tefx Aamjhi • Sale only within Germany or the EU Sales / takeover conditions: • Disassembly, removal, and transport are the responsibility and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. Personnel must work with the appropriate personal protective equipment, and only trained personnel may be employed. If you are interested, we look forward to your response to coordinate further details directly.

Stanje: novo, Technical specifications: Drilling capacity in steel: 40 mm Tapping capacity: M 20 Spindle: MT 3 Reach: 260 mm Speeds: (12) 55 - 2520 rpm Quill stroke: 130 mm Table size: 585 x 190 mm Travel X: 380 mm Travel Y: 190 mm Column diameter: 115 mm Motor power: 2.2 kW Weight, approx.: 300 kg Equipment: Ledpfxowhd Afs Aamshi - Cross table - Thread draw spindle - Tapping device - Rotatable table - Height-adjustable safety cover - Spindle guard protected by limit switch

Stanje: novo, Technical data: Drilling capacity in steel: 50 mm Thread cutting capacity: M33 Face mill: 100 mm End mill: 25 mm Spindle: MT 4 Throat depth: 340 mm Spindle speeds: (6) 50 – 1510 rpm Quill stroke: 200 mm Quill feed: 0.1 / 0.2 / 0.3 / 0.4 mm/rev Table size: 820 x 240 mm X-axis travel: 460 mm Y-axis travel: 280 mm Column diameter: 180 mm Number of T-slots: 4 Lhjdpfx Aopxmlqoamsi T-slot size: 16 x 26 mm Motor power: 3 kW Weight, approx.: 750 kg Equipment: - Cross table - Thread drawbar - Thread cutting device - Automatic spindle feed - LED machine lamp - Swiveling table - Manual fine feed - Coolant system - Height-adjustable safety guard - Spindle guard with limit switch

Stanje: novo, Special promotional price for stock items! Only while supplies last! Price is net ex stock, loaded free of charge. The machine is supplied without a machine stand. Machine stand BF3 Deluxe available separately under Art. No. 56-1017. Lhodjdh Hbcopfx Aamoi Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. face mill diameter: 80 mm Throat depth: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle taper: MT 4 Quill stroke: 125 mm Table size: 800 x 240 mm Table travel (x / y): 555 / 225 mm Milling head swiveling: -90° to +90° Spindle to table distance: 60 - 485 mm Milling head height adjustment: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H)*: 1140 x 770 x 1500 mm Weight approx.: 287 kg * without machine stand Features: - Simple and quick speed changes via gear selector switch - Versatile applications such as drilling, milling, thread cutting, etc. - High running smoothness thanks to precision-ground, oil-bath lubricated gear wheels - Right- and left-hand rotation for thread cutting - Quill adjustment via handle, fine adjustment via handwheel - Dovetail guides for x-, y-, and z-axis, adjustable via gib strips - Milling head swivels on both sides for angle drilling, chamfer milling, etc. - Heavy-duty, large cross table, precisely ground surface - Optimal price-performance ratio for the cost-conscious user Scope of delivery: Quick-release drill chuck 3 - 16 mm / B 16 Drill chuck arbor MT 4 / B 16 Drawbar M 16 Reducing sleeve MT 4 / 3 Combination shell end mill arbor MT 4 / 27 mm Height-adjustable safety guard Thread cutting device LED machine lamp Digital quill stroke display Slatted safety cover Longitudinal measurement scale Operating tools

Stanje: rabljeno, Leto izdelave: 2008, Delovna širina: 260 mm Delovna višina: 130 mm Delovne gredi: 5 Razporeditev vretena: spodaj, desno, levo, zgoraj, spodaj Kanalna postelja: da Moč motorja spodnje gredi: 5,5 kW Moč motorja desne gredi: 5,5 kW Moč motorja leve gredi: 7,5 kW Moč motorja zgornje gredi: 7,5 kW Moč motorja spodnje gredi: 7,5 kW Nastavitev spodnje gredi: ročica Nastavitev desne gredi: ročica Nastavitev leve gredi: ročica Nastavitev zgornje gredi: ročica Skobeljni glavi: Centrolock Hitrost podajanja: brezstopenjska Pritisk podajalnih valjev: pnevmatski Poraba toka: 50A Poraba toka: 71,7A Zavorni sistem motorja: avtomatski Lhsdjyhgkdopfx Aamsi Priključek za odsesavanje: Dolžina stroja: Širina stroja: Teža: 4500 kg

Stanje: novo, Leto izdelave: 2025, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 4.000 mm, pomik po osi Z: 1.500 mm, (Distance between machine stands 3,520 mm) Z= 1,500 mm Heidenhain control system Water-cooled inline motor 43 kW / 900 Nm Automatically indexing milling head 6,000 rpm / 2 planes, 90°|45° / 0.001° x 0.001° 3-sided protective enclosure Electronic handwheel 2 x chip conveyors Lodpjqrq Emjfx Aamjhi 60-position tool changer

Stanje: delavnici obnovljeno (rabljeno), Število rezkalnih vreten: 2 kos. Prislon: da / ne Orodje: da STEGHERR tip KSF-mini, križna rezkalnica ----- Specialna rezkalnica za učinkovito izdelavo križnih spojk. Križna rezkalnica KSF-mini je rezultat dolgoletnih izkušenj podjetja STEGHERR pri izdelavi teh specialnih strojev za izdelavo križnih spojk. Z modelom KSF-mini lahko hitro in natančno izdelujete vse vrste križnih spojev, ki se pojavljajo v praksi. Obravnavati je mogoče tudi že profilirane letve. Natančna izrezava je omogočena, saj se obdelovanec vpne in obdela s treh strani v enem vpetju. Pogon orodja preko dveh trifaznih motorjev; vpenjanje obdelovancev je pnevmatsko. Profilni rezkar je prilagojen širini stega. Žagine liste za izdelavo utora je mogoče s pomočjo distančnih obročev nastaviti na mere profilnega rezkarja. Stroj je zasnovan za maksimalen presek obdelovanca 56 x 46 mm. - Motor 2,2 kW, 380 V, 50 Hz - Pnevmatski tlak 6 bar Vključuje: ----- - Podnožje za mizo - Nožno stikalo - NOVO, ORIGINAL prislonsko letvico z merilno lestvico in premičnim prislonom z nastavitveno optiko, kot je prikazano na slikah. Lhedpfx Aaozip Nwsmei Orodja, kot so prikazana na slikah: 1 kos profilni rezkar 3 žagini listi (za širino stega 10 mm) Mere postavitve približno DxŠxV: 1.330 x 570 x 1.430 mm Teža: cca 150 kg ----- (vse tehnične specifikacije po podatkih proizvajalca, brez garancije!)

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, CNC-obdelovalni stroj za zobnike / CNC-stroj za izdelavo zobnikov z valjanjem Nadzorni sistem: Siemens 840 D Power Line Tehnični podatki: Največji premer obdelovanca: 150 mm Premer mize: 145 mm Lsdozkwvnspfx Aamjhi Največja hitrost vrtenja mize: 800 vrt/min Razdalja med osmi / med centri: 10 – 200 mm Največji axialni hod: 250 mm Kot nagiba glave za rezanje: +/- 45° Največji hod vodila: 300 mm Največja hitrost hitrega premika: 17.000 mm/min Moč pogona glave za rezanje: 19 kW Največji modul: 3 mm Največja hitrost vrtenja vretena za rezanje / hitrost vrtenja orodja: 4.500 vrt/min Največji premer orodja za valjanje: 80 mm Največja dolžina orodja za valjanje: 200 mm Približne mere: 5,5 x 3,7 x 3,1 m Približna teža: 9.500 kg Oprema: Transportni sistem za odrezke Sesalni sistem za oljne pare / sesalni sistem za olje Hladilnik olja Podpirač z mehanizmom za spuščanje in navpično nastavitev Rotacijski podajalnik z dvema ročnima prijemaloma za obdelovance Sistem transportnega traku za samodejno podajanje 5 kosov vpenjal za rezalnike / vpenjal za orodja za valjanje: 1 x Ø 22 mm 2 x Ø 27 mm 1 x Ø 32 mm 1 x Ø 40 mm Drugo: Video posnetki preko WhatsApp

Stanje: dober (rabljeno), Modul – maks. 2 Dolžina rezkalnika: 135 mm Skupna potrebna moč: 2,2 kW Masa stroja: pribl. 1420 kg Ljdpfx Aajzkvuvsmehi Potreben prostor: pribl. 2,00 x 1,60 x 1,43 m --> Tehnični podatki: največji premer rezkalnika: Ø 150 mm --> največja dolžina rezkalnika: 135 mm --> največji modul: 2 --> premer vretena: Ø 24 mm --> vpenjalna priprava vretena: MK-4 --> hitrosti vretena: 140 – 1120 vrt/min. --> avtomatski pomiki Oprema in dodatna oprema: sistem za hlajenje, rezkalniki, zamenljiva kolesa, navodila za uporabo

Stanje: novo, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.000 mm, dolžina mize: 3.000 mm, širina mize: 1.700 mm, največja hitrost vretena: 6.000 obr/min, hitro pomikanje X-os: 24.000 m/min, hitri pomik os Y: 24.000 m/min, hitri pomik na osi Z: 24.000 m/min, obremenitev mize: 10.000 kg, položaj glave za glodanje: Vertikal, teža obdelovanca (maks.): 10.000 kg, vrtilni moment: 1.392 Nm, skupna masa: 30.000 kg, nos vretena: SK 50 - DIN 69871/A, moč vretenovega motorja: 53 W, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, STARVISION DX 3220 – portalni rezkalni stroj – na voljo v kratkem času Tehnična oprema: Nadzor: HEIDENHAIN TNC 7, CNC nadzor gibanja HEIDENHAIN TFT-zaslon, 19" HEIDENHAIN motorji, merilni sistemi in elektronsko ročno kolo Hlajenje: Notranji sistem za dovajanje hladilne tekočine (IKZ), 70 bar Menjalnik orodij (MTO): 60-mestni verižni hranilnik z dvojnim prijemalom Odstranjevanje strožij: Težni transporter za strožije (prečno) Dvojni vijačni transporter (dolžino) Priprava: Lhedpfxshy Avpo Aamsi Priprava za 4. os (okrogla miza) Ohišje: Popolno ohišje, zgornji del zaprt Natančnost: Natančnost pozicioniranja: ± 0,035 mm Natančnost ponavljanja: ± 0,028 mm Kontaktirajte nas – z veseljem vam bomo svetovali in pripravili individualno ponudbo.

Stanje: rabljeno, Leto izdelave: 1990, Bettfräsmaschine CORREA A25/25 Verfahrwege X: 2500 mm Verfahrwege Y: 1200 mm Verfahrwege Z: 1000 mm CNC-Steuerung: HEIDENHAIN TNC 355 Spindelaufnahme: SK 50 Spindelmotor: 30 PS Spindeldrehzahl: 2–3000 U/min Tischgröße: 3000 x 1000 mm Baujahr: 1990 Ljdpfx Aaszmx R Eemjhi Max. Tischbelastung: 7 t Manueller Schwenkkopf Spannung: 380 V Abmessungen (L x B x H): 5000 x 3000 x 3000 mm Gewicht: 16,5 t

Stanje: rabljeno, Fiksna posteljna rezkalni stroj VERNIER DB 420 Ljdpszmx Rxofx Aamohi Pomik X: 1200 mm Pomik Y: 420 mm Pomik Z: 600 mm Krmiljenje HEIDENHAIN Vreteno SA40 Hitrost vretena: od 40 do 2000 vrt/min Velikost mize: 1600 x 400 mm Glava z vodoravnim in navpičnim nagibom Motor vretena: 7,5 KW Pomiki: avtomatski X - Y - Z Napetost: 380 V Širina z miznimi nastavki: 2700 mm Globina: 2500 mm Skupna višina: 2200 mm Teža: pribl. 4,5 T

Stanje: pripravljen za uporabo (rabljen), Wörner AGE 6, namizna vrtalna naprava za navoj, naprava za rezkanje navojev Lhsdpeukq I Defx Aamoi Doseg: 130 mm Globina navoja: nastavljiva ročno Dve hitrosti Upravljanje z nogo Možnost ročnega in avtomatskega delovanja. Potreben prostor: približno 650 mm x 350 mm x 750 mm (D x Š x V) Z veseljem vas vabimo, da nas obiščete in si ogledate napravo. Z veseljem vam lahko uredimo ugoden prevoz. Dobili boste ustrezno račun. Za tuje stranke lahko izstavimo tudi račun brez DDV. Pogoj je veljavna številka za identifikacijo davčnega zavezanca. Pridržujemo si pravico do medprodaje. Obiščite našo spletno trgovino in si oglejte tudi naše druge ponudbe. Navedena imena podjetij in blagovne znamke so last njihovih lastnikov in se uporabljajo samo za identifikacijo in opis izdelkov. Odstopanja od tehničnih podatkov in napake v opisu izdelka so možne in so pridržane.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, x-travel 14,000 mm y-travel 5,000 mm z-travel 1,500 mm w-axis 3,000 mm Column clearance 4,000 mm Gantry column: Distance table – spindle nose 4,500 mm Workpiece weight 100 t Table dimensions – longitudinal 9,000 mm Table dimensions – cross 3,000 mm Lsdsvwgm Hspfx Aamjhi Spindle taper ISO SK 50 Spindle speed 2–2,500 rpm Spindle drive 113 kW Spindle diameter 200 mm Spindle torque 9,500 Nm Feed range x-axis 1–10,000 mm/min Feed range y-axis 1–10,000 mm/min Feed range z-axis 1–10,000 mm/min Rapid traverse 20,000 mm/min Height above floor 8,600 mm Control SIEMENS 840C Machine weight approx. 360 t >>> retrofit 2011

Stanje: dober (rabljeno), Leto izdelave: 2005, x-travel: 6000 mm y-travel: 3500 mm z-travel: 1500 mm Control: SIEMENS 840D Table load capacity: 12 t Height above floor level: 6300 mm Table size (longitudinal): 5000 mm Lhsdpfjvwglvex Aamji Table size (cross): 2500 mm Number of tables: 2 Tool changer: 200 positions Maximum tool weight: 30 kg Tool holder: HSK A 100 Maximum tool diameter: 250 mm Maximum tool length: 500 mm Spindle speeds: 5–6000 rpm c-axis: -10 to 370° b-axis: 5 to -95° Column passage: 3000 mm Distance spindle nose to table: 1500 mm Machine weight: approx. 161 t Space requirement: approx. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec gantry milling machine is in very, very good condition and can be inspected at the seller’s facility by appointment.