Cormak Ps-180 nakup rabljenega (9.156)

Stanje: novo, številka stroja/vozila: c1946328bb4efe26fccb128ee, lastna masa: 3 kg, največja dovoljena obremenitev: 14 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 385 / 55 r 22,5, Further Information Chassis Turntable Semi-trailer for Waste Disposal Fine-grained steel welded construction 2 longitudinal beams with cross members, top side of the longitudinal beams designed as a container roller track in wear-resistant design, rear-loadable, with run-up ramp. Suitable for roll-off containers with a length of 6.5/7.0 m. Container Locking System: - 2 pairs of locking hooks recessed into the floor - Pneumatic actuation The container locking system is a 2-point design acting internally; locking of roll-off containers with an internal strut is not possible (for transporting roll-off containers with subframes according to DIN 30722). Turntable with robust slewing ring Wheel chocks with holders Side underride protection, aluminium Rear underride protection, steel Half-shell mudguards Drawbar equipment for turntable trailer Drawbar with tested 40 mm towing eye Axles + Suspension SAF disc brake axles with 430 mm brake disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Wheels and Tires 385/55 R 22.5 Manufacturer’s choice Steel rims, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake Immobiliser: When container locking is open, the spring-loaded parking brake is activated Vehicle – Driving Stability System 2 reverse-polarity safe coupling heads at the front, with connecting lines to the truck EBS, Electronic Braking System with EBS plug at the front and connecting cable Note: The trailer may only be towed by vehicles that guarantee effective ABS operation! Giedpfx Aji Ri Nmshmou With lift and lower valve Electrics 24 Volt, multi-chamber rear lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin reverse-polarity safe plugs at the front, with connecting cable Registration/Country Plates Registration country: Germany With DEKRA inspection and certificate (according to §13 EC – FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame in DB 7350 Nova Grey, 10 years warranty against corrosion perforation Drawbar KTL black Note: Archive images!

Stanje: novo, številka stroja/vozila: b6e633155abf971a017e4b53b, lastna masa: 3 kg, največja dovoljena obremenitev: 14 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 385 / 55 r 22,5, Further Information Chassis Turntable Trailer Disposal Fine-grained steel welded construction Carriage: The container is placed on the carriage from the rear and pushed forward, front container stop adjustable for 6.0 / 6.5 and 7.0 m roll-off containers with external roller. Container Locking: - 2 pairs of locking hooks recessed in the floor - Pneumatic actuation Gjdpfx Asi Ri Nqehmeiu The container lock is of 2-point design, operating from the inside, and locking containers with internal crossbars is not possible. Turntable with robust ball bearing slewing ring Wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Half-shell fenders Rear impact protection vertically on left and right, with delta rubber on rear underrun holder Turntable trailer coupling device Drawbar with certified 40 mm towing eye Axles & Suspension SAF disc brake axles Axle/chassis laser alignment reduces tire wear and fuel consumption Air suspension with raise & lower valve Wheels and Tires 385 / 55 R 22.5 Manufacturer's choice Steel rims factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake Immobilizer: When the container lock is open, the spring-loaded parking brake is activated Vehicle Stability System 2 interchangeable coupling heads at the front, with connection lines to the towing vehicle, EBS electronic braking system with EBS plug at the front, with connection cable Note: The trailer may only be towed by tractors that ensure effective ABS function! Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 additional LED work lamp at the rear, switched via reverse light 2 x 7-pin interchangeable plugs at the front, with connection cable Registration / Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tapes according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau Drawbar KTL black Note: Archive images!

Stanje: rabljeno, največja dovoljena obremenitev: 13.560 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2012, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.700 mm, prostornina tovornega prostora: 48 m³, * 18t Sonntag bodywork with air suspension in reinforced design * Gigant axles / air suspension / drum brakes / rear support legs / height and length adjustable drawbar / sliding tarp / portal doors / 50 mm towing eye with air coil and Duomatic coupling ----As viewed or offered, without additional services or accessories. Our offers are generally without new TÜV inspection. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may be covered with advertising stickers and/or lettering. Our general terms of delivery and payment apply. We support you with export procedures, preparation of export documents, procurement of license plates, supplier declarations, etc.! The information provided in advertisements, on the Internet, price tags, and images are non-binding descriptions and are not guaranteed characteristics. The seller assumes no liability/warranty for typographical or data transfer errors. Stated equipment should be separately verified if necessary. We explicitly reserve the right to prior sale, as we also list this item on other platforms. Accessories indicated are subject to change without notice. Alterations, prior sale, or errors excepted. We offer and strongly recommend an inspection and examination in order to avoid any misunderstandings regarding the condition and suitability by the buyer. The vehicle and tarp may be labeled; images may be edited. Godpfx Aox Nb H Djhmsiu We sell exclusively in accordance with our terms and conditions, with any warranty excluded. Inspections and examinations are possible at any time by appointment and are expressly recommended.

Leto izdelave: 2017, stanje: rabljeno, Metering rotary valve, rotary valve, dosing lock, rotary feeder for screw conveyor, transport screw, auger conveyor, conveying technology, tubular screw conveyor Gjdjh Ay R Ejpfx Ahmjiu - Manufacturer: Olocco, rotary valve type VPS 180 - Inlet: Ø 120 mm - Outlet: 150 x 115 mm - Shaft: Ø 25 x 60 mm - Dimensions: 320/250/H245 mm - Weight: 27 kg

Stanje: rabljeno, Pneumatic cylinder, air cylinder, pneumatic piston, air piston, ISO cylinder, round cylinder - Manufacturer: Festo, ISO cylinder type DSNU-32-180-PPS-A Gedpfx Ajqn Apushmoiu - Stroke: 180 mm - Piston: Ø 32 mm - Piston rod: Ø 12 mm / M 10 x 1.25 - Proximity switch: see photos - Dimensions: 330/38/H65 mm - Weight: 0.6 kg

Stanje: rabljeno, prevoženi kilometri: 74.955 km, moč: 132 kW (179,47 KM), prva registracija: 06/2024, vrsta goriva: dizel, lastna masa: 2.165 kg, največja dovoljena obremenitev: 1.260 kg, skupna masa: 3.500 kg, velikost pnevmatike: 215/75R16C, konfiguracija osi: 2 osi, medosna razdalja: 4.035 mm, barva: bela, vrsta prenosa: mehanski, vzmetenje: jeklo, število sedežev: 3, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, klimatska naprava, računalnik na krovu, registracija tovornjaka, tempomat, FIAT Ducato MAXI Furgon L4H2 3500 180 MT | Klimatska naprava, tempomat, asistent za ohranjanje voznega pasu, prepoznavanje prometnih znakov | 3-sedežna klop | Kamera za vzvratno vožnjo, zadnji parkirni senzorji | Navigacijski sistem | Tlačna in bočna obloga | 3 načini vožnje: Eco/Normal/Power | Lesena obloga tovornega prostora | Pridržujemo si pravico do napak, vnosov in predprodaje. Gisdpfxsya Ncte Ahmju

Stanje: rabljeno, prevoženi kilometri: 121.265 km, moč: 130 kW (176,75 KM), prva registracija: 05/2023, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 3, skupna dolžina: 6.836 mm, skupna širina: 2.040 mm, skupna višina: 2.590 mm, dolžina tovornega prostora: 4.118 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Napomena: greške i prethodna prodaja su mogući! Interni broj: 1211. 9016068 ----OPREMA * Priprema za kuku za prikolicu * Zadnja stepenica * Spoljašnji retrovizori električno podesivi i grejani * Električni podizači prozora * Centralno zaključavanje sa daljinskim upravljačem * Kamera za vožnju unazad * Visoka bočna obloga tovarnog prostora * Vezne šine na plafonu i bočnim zidovima * LED unutrašnje osvetljenje * Zadnja krilna vrata sa otvaranjem od 270° * SOS funkcija za hitne slučajeve eCall * Čitajuće lampe levo/desno * Start/Stop funkcija može se isključiti * Klima uređaj * USB priključak * DAB+ radio sa ekranom osetljivim na dodir * Vozačko sedište sa naslonom za ruke * Dvostruko suvozačevo sedište ... i još mnogo toga. ----Vozilo je u neočišćenom stanju! Isporuka širom zemlje uz doplatu moguća. Napomena: greške i prethodna prodaja su mogući. Rado prihvatamo vaše vozilo u zameni. Finansiranje / lizing moguće i bez avansa! Imate li još pitanja? Rado ćemo vas posavetovati! Giedpfxjxriccj Ahmsu

Stanje: rabljeno, lastna masa: 5.300 kg, največja dovoljena obremenitev: 12.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2010, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.900 mm, prostornina tovornega prostora: 52 m³, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 ---/141J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 ---/141J, velikost zadnje pnevmatike: 235/75R17,5 ---/141J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Lashing eyes, -- Typographical errors, mistakes and changes excepted, sample images --, More data at: !, More details: ! Gsdjzbq Ruepfx Ahmeiu

Stanje: rabljeno, lastna masa: 4.300 kg, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2019, dolžina tovornega prostora: 7.200 mm, vzmetenje: zrak, velikost pnevmatike: 445/45 R19,5 160J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 445/45 R19,5 160J, velikost zadnje pnevmatike: 445/45 R19,5 160J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Printing errors, mistakes and changes excepted, sample images shown. For more details, visit: ! Gjdjzbq Rzepfx Ahmeiu

Stanje: dober (rabljeno), Nagel Citoborma 180 vrtalnik za papir s podstavkom Stroj je 100% delujoč. Zelo dobro ohranjen. Močna konstrukcija – teža približno 100 kg. Eden najnovejših modelov Citoborma vrtalnikov. Napajanje: 230V. Eno vrtalno vreteno. Gedpfxezdawvs Ahmsiu Premer svedra: 2-20 mm. Višina kupa: 60 mm. Vrtalna miza je nastavljiva v vse smeri (stranice, spredaj/nazaj). Ima nastavke za določanje razdalje med izvrtinami. Dodatno je opremljen z avtomatsko blokado mize, ki se sprosti po vsakem ciklu. Komplet vključuje svedre, orodja, novo podlago za rezanje in navodila.

Stanje: dober (rabljeno), Nagel Citoborma 180 vrtalnik za papir Stroj je 100 % funkcionalen. Gre za najnovejši model. Vrtalna miza je nastavljiva v vse smeri (strani, spredaj/zadaj). Ima omejevalnike za nastavitev razmika vrtanja. Vgrajena miza je povečana različica. Poleg tega ima vrtalnik avtomatsko zaklepanje mize, ki se sprosti po vsakem ciklu. Zelo dobro ohranjeno. Robustna konstrukcija – teža 65 kg. Napajanje 230V Ena vrtalna glava. Premer vrtanja 2–20 mm. Višina sklada 60 mm. Giedpszdav Ejfx Ahmsu Stroj je bil servisiran. Vključuje svedre in orodje, novo rezilo in navodila za uporabo.

Leto izdelave: 2021, stanje: dober (rabljeno), 1 complete granulation line, cutter compactor/extruder combination, tangential, operated in single-shift mode since 2021 with production waste, including DPE regrind/Alu (pipe material) The plant consists of: - Hydraulic roll cutter, 140 cm width, for roll diameters up to 60 cm, drive 18.5 kW Godpfszb Dr Sjx Ahmjiu - Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with time switch - Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic pusher, 74 reversible cutting crowns on rotor, discharge and inclined screw conveyor - Roll feed for heavy rolls with longitudinal cutting device to reduce load on mill, frequency-controlled drive 3.5 kW - Cutting mill with 11 kW, downstream for parallel operation shredder / roll feed, extraction/conveying blower to buffer silo with agitator, frequency controlled for discharge quantity/dust coverage - Screw feeder for ground material - Conveyor belt L 9 m x W 80 cm, metal detector bridge, frequency controlled via load on cutter compactor. - Screw conveyor for 100% ground materials, stainless steel, L 4.5 m and diameter 100 mm - Cutter compactor 138 kW, frequency-controlled, extraction blower, water spray cooling, tangential to extruder ES 180 mm 30 LD with dual vacuum degassing, incl. - Laser filter LF with 500 mm diameter / 2-disc system, discharge screw for contaminants with timer, melt pressure transducer, spare screens: 60mesh, 2x 70mesh - Strand die with 26 holes – interchangeable dies, year of manufacture 2021, melt pressure sensor, full overhaul/exchange of wear parts in January 2026 - Strand cooling water trough L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023 - Strand pelletizer SG 200 E with 7.5 kW and 1x spare pelletizer 5.5 kW for quick changeover during overhauls or cleaning/maintenance work - Pellet classifier sieve, stainless steel, including blower and pipework - BIG BAG filling frame, 2-place, with stairs and platform - BIG BAG floor scale with receipt printer - Throughput dependent on material, up to 900 kg/h - Start-up and commissioning by our technicians, details and costs on request – as agreed - Inspection available in Wuppertal, appointments can be arranged at short notice

Stanje: novo, prevoženi kilometri: 50 km, moč: 132 kW (179,47 KM), vrsta goriva: dizel, skupna masa: 3.500 kg, barva: siv, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna dolžina: 7.400 mm, skupna širina: 2.400 mm, skupna višina: 2.200 mm, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.100 mm, Leto izdelave: 2026, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), The new Citroën Jumper – your reliable partner for daily business operations. With its modern design, generous cargo space and high functionality, it supports you in every challenge. Whether for trade, transport, or service deployments – the Jumper impresses with comfort, efficiency, and is ready to accompany your business every day. Standard Equipment: * Central locking with remote control * Electrically adjustable exterior mirrors * Electric windows, front * Armrests, front * Steering wheel paddle shifters * Air conditioning * Radio * DAB receiver * Hands-free system * Bluetooth * Touchscreen * ABS * ESP * Stability control * ASC (traction control) * ASR (drive slip regulation) * Power steering * Light sensor * Emergency brake assist (F.A.) * Lane departure warning * Blind spot monitor * Traffic sign recognition * Driver fatigue alert * Cruise control * Speed limiter * Electronic immobilizer Giedpoy U Stxsfx Ahmou Including additional options: * Artense Grey (metallic) * Cloth upholstery Crepe Black + special backrest trim * Techno Visibility Plus Package J6XK * 10" Audio-NAV system with touchscreen + DAB + Apple CarPlay & Android Auto * Dual USB charging ports + Connected Services ZJB5 * Automatic climate control RE07 * Visibility Plus Package J6MV * All-weather tires MI32 * Digital tachograph HC09 * Driver’s suspension seat (swivel seat) RH16 * Extended rear wiring harness KY06 * Reinforced rear suspension (double leaf spring) SE08 Superstructure: * Recovery vehicle body with ramp, roadside assistance vehicle * "Tranutec" tool storage box * LED work lights * 3.0 t tow bar * "Pundmann" winch * Additional air suspension on rear axle * Warning light bar on roof * TÜV §13 StVZO compliant Tranutec – The commercial vehicle specialist! With over 15 years of experience in utility vehicles, we offer not only top prices but also tailored solutions to meet your needs. For example, directly from Tranutec factory as optional equipment: * Leaf catcher guards * Raised drop sides * Tarpaulin and hoops * Warning light bar * Short towbar (for tipper vehicles; prevents sidewall damage) * Custom toolbox attachments, etc. * Municipal conversions Contact us! We are happy to provide you an offer tailored to your requirements. ---- WE ARE A CITROËN AUTHORIZED DEALER and body builder Final price includes delivery costs 2-year manufacturer’s warranty from initial registration, unlimited mileage We are happy to advise you about additional equipment, special solutions, as well as financing and leasing options. Images may show similar model examples, not binding. Subject to change, error, or prior sale! All data are non-binding. Despite ongoing checks, a difference in the vehicle (e.g. regarding technical data, equipment, materials, and appearance) from the description above cannot be excluded. Please note that any contract will solely refer to the actual as-inspected condition of the vehicle.

Stanje: novo, prevoženi kilometri: 50 km, moč: 132 kW (179,47 KM), vrsta goriva: dizel, skupna masa: 3.500 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, skupna dolžina: 7.400 mm, skupna širina: 2.400 mm, skupna višina: 2.200 mm, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.100 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), The new Jumper. The Citroën Jumper – a reliable partner for your business. Unbeatable value for money. Standard equipment includes: * Central locking with remote control * Electrically adjustable exterior mirrors * Electric front windows * Front armrests * Gear shift paddles on steering wheel * Air conditioning * Radio * DAB receiver * Hands-free system * Bluetooth * Touchscreen * ABS * ESP * Stability control * ASC (traction control) * ASR (anti-slip regulation) * Power steering * Light sensor * Emergency brake assist (F.A.) * Lane departure warning * Blind spot monitoring * Traffic sign recognition * Driver fatigue detection * Cruise control * Speed limiter * Immobilizer Including additional options: * Ice White P0PR * Crepe Black fabric upholstery + patterned seatbacks * Techno Visibility Plus Package J6XK * 10" Audio Navigation System with touchscreen + DAB + Apple CarPlay & Android Auto + dual USB charging port + Connected Services ZJB5 * Automatic climate control RE07 * Visibility Plus package J6MV * All-weather tires MI32 * Digital tachograph HC09 * Air-suspended driver’s seat (comfort seat) RH16 * Extended rear wiring harness KY06 * Reinforced suspension (double-leaf rear springs) SE08 Body: * Recovery truck superstructure with loading ramps * “Tranutec” storage box * LED work lights * 3.0t towbar * “Pundmann” winch * Additional rear axle air suspension * Painted side panels * TÜV approval as per §13 StVZO ---- Tranutec – The commercial vehicle specialist! We offer you 15 years of experience with utility vehicles! In addition to top prices, we provide tailored solutions to meet your individual needs. For example, as factory-fitted Tranutec accessories: * Leaf grilles * Drop side height extensions * Tarpaulin hoops * Warning light bars * Short towbar (for tipper bodies, prevents side wall damage) * Additional storage box mounting, etc. * Municipal conversion Gjdpjymh Eajfx Ahmsiu Contact us! We would be happy to make you an individual offer based on your requirements. ---- WE ARE A CITROËN AUTHORISED DEALER AND BODY MANUFACTURER Final price incl. delivery costs 2-year manufacturer’s warranty from first registration with no mileage limit We are happy to advise you about further optional extras and specialist solutions, as well as financing and leasing offers. Images may show a sample model, non-binding. Subject to change, error & prior sale! All information without obligation. Despite careful checks, deviations of the actual vehicle (e.g., regarding technical data, equipment, materials & external appearance) from the above description cannot be ruled out; therefore, the subject of any resulting contract will solely be the motor vehicle in its actual condition.

Stanje: zelo dobro (rabljeno), Kataloška številka: 7649 TEHNIČNI PODATKI širina vhoda: 900 mm višina vhoda: 300 mm širina gredi: 1030 mm premer gredi: 700 mm dolžina noža: 1030 mm število nožev: 3 kos mere sita: 70x70 mm spodaj 2 zobati vpenjalni gredi motor spodnje gredi: 7,5 kW zgoraj 2 zobati vpenjalni gredi motor zgornje gredi: 7,5 kW trakasti podajalnik Giedpfx Ajzcby Nehmsu redler z verižnim trakom 5600 mm + 10600 mm: 2,2 kW širina podajalnega traku: 800 mm glavni motor: 90 kW vzvratni hod skupne mere stroja d/š/v: 3300x3100x1700 mm mere osnove za sekalnik: 3300x2080x1940 mm mere podajalnika / redlerja d/š/v: 5600x900x1000 mm + 10600x1050x1600 mm mere osnove za podajalni trak: 5100x1300x2520 mm skupna teža približno: 16.000 kg PREDNOSTI – nemška izdelava – verižni transporter tipa redler, opremljen s strgali – vzvratni hod – DTR dokumentacija – rabljen sekalnik, odlično ohranjen Neto cena: 219.900 PLN Neto cena: 52.350 EUR odvisno od tečaja 4,2 EUR (Cene se lahko spremenijo ob večjih nihanjih)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, In this offer, you are purchasing a used color production system "Xerox Versant 180 Press". Scope of Delivery: 1 x Xerox Versant 180 Press with the following configuration: - incl. Fiery E300-5 - incl. Paper Deck A-CF01/A-GW03 - incl. Booklet Finisher A-FN13 Not the right configuration? We can configure the machine according to your requirements. Feel free to contact us! Meter Readings: - Total: approx. 729,330 pages - Color: approx. 505,865 pages - Black: approx. 223,465 pages Gedpfx Aheza A Eusmeiu Condition: This offer is for a used device, which may show signs of use (such as minor scratches or discoloration). The device has been function-tested. A test printout can be seen in the photo. Packaging and Shipping: You are welcome to inspect the device during our business hours. Please schedule an appointment! Sea-worthy packaging and worldwide shipping are available upon request. A functional test will be documented on video for you prior to shipping or collection. For more information, please feel free to contact us directly.

Stanje: zelo dobro (rabljeno), Weiss WT-1300/70/15 Temperature Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Model: WT-1300/70/15 Water-cooled temperature test chamber with touchscreen control for temperature testing in research, development, quality assurance, and industrial applications. Technical Specifications Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1,340 liters Temperature change rate (heating): 15 K/min Temperature change rate (cooling): 10 K/min Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature uniformity: ±0.5 to ±2 K Test chamber dimensions: Height: 920 mm Width: 1,100 mm Depth: 1,330 mm External dimensions: Height: approx. 2,050 mm Width: approx. 1,300 mm Depth: approx. 3,200 mm Permissible specimen load: Chamber floor: 150 kg Insert rack: 50 kg Electrical Data Rated voltage: 3/N/PE AC 400 V ±10% 50 Hz Rated current: 63 A Rated power: 44 kW Refrigeration System Refrigerant R404A: 14.0 kg Refrigerant R23: 5.4 kg R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standby pressure: 18.5 bar Equipment Touchscreen control Stainless steel test chamber Multiple shelf levels Lateral cable port Heated door seal Giedpoza Dv Isfx Ahmeu Water-cooled refrigeration unit CEE plug connection CE marking Weight: approx. 1,500 kg Condition Used unit from industrial operation. Visual condition as per images. For the safety of our customers, the following procedures are carried out on the offered climate chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented trial run after successful inspection Scope of delivery: see images Inspection possible by appointment. Loading can be organized. Subject to technical modifications and errors.

Stanje: novo, Leto izdelave: 2026, Industrial metal lathe CORMAK TORNADO 460x2000 Main advantages: - Versatility of applications: The lathe is perfectly suited for a wide range of tasks, including internal and external turning, taper turning, metric, inch, module, and DP threading, polishing, drilling, and broaching. - Stable construction: The 300 mm wide cast iron bed is hardened and precisely ground, ensuring excellent vibration damping and stable working conditions even under heavy loads. - Digital precision: The machine is equipped with a digital readout on two axes (longitudinal and cross), displaying accurate displacement values on the screen thanks to optical encoders. - High-quality spindle: Reinforced bearing system in the spindle and a large 82 mm bore guarantee optimal performance. The set includes both a 250 mm three-jaw chuck and a 320 mm four-jaw chuck as well as a 5.5 kW motor. - Efficiency and productivity: Rapid longitudinal and cross feed system via joystick significantly reduces machining time. The hardened and ground gears in the spindle gearbox ensure durability and reliability for years. - Broad thread cutting capabilities: Threading function (metric, inch, module, and DP), both right- and left-handed, and quick parameter changes without gear replacement make work faster and more convenient. Supported thread ranges: metric (41) 0.1–14 mm, inch (60) 2–112 T.P.I., module (34) 0.1–7 M.P., and DP (50) 4–112 D.P. - Precise thread counting: The lathe is equipped with a thread-cutting dial, allowing for fast repositioning of the carriage after disengaging the lead screw nut. - Ergonomics and ease of use: The intuitive control panel on the gearbox allows for easy adjustment of spindle speed and automatic feed rate. - Machining of large workpieces: The removable bed bridge allows machining of workpieces up to 690 mm in diameter and 240 mm in length (with bridge removed), further extending the machine’s capabilities. Technical specifications: Swing over bed: ø460 mm Swing over cross slide: ø274 mm Swing in gap (diameter x width): 690 mm x 240 mm Center height: 230 mm Distance between centers: 2000 mm Bed width: 300 mm Max. tool shank size: 25 x 25 mm Total cross slide travel: 290 mm Total top slide travel: 120 mm Spindle bore: ø82 mm Spindle nose: D1-8 Spindle taper: ø90 (1:20) Number of spindle speeds: 12 Spindle speed range: 25–2000 rpm Leadscrew diameter and pitch: ø35 mm x 6 mm Imperial threads: 2–112 TPI (60) Metric threads: 0.1–14 mm (41) Diametral pitch threads: 4–112 D.P. (50) Module pitch threads: 0.1–7 M.P. (34) Godjv E Eiispfx Ahmeiu Longitudinal feed: 0.031–1.7 mm/rev (42) Cross feed: 0.014–0.784 mm/rev (42) Tailstock sleeve travel: 120 mm Tailstock sleeve diameter: ø60 mm Tailstock taper: MT no. 4 Spindle motor: 5.5 kW Coolant pump motor: 0.09 kW Machine dimensions (LxWxH): 3220x1040x1340 mm Weight: 2785 kg

Stanje: novo, Leto izdelave: 2026, Proven industrial machine! Successfully sold throughout Europe. Heavy-duty, professional, and easy-to-operate band saw with robust construction. Allows precise adjustment of operating parameters, which directly translates into cutting efficiency. - The quick-release lever facilitates both rapid blade tensioning and easy blade removal - Precision cast iron table with ground and polished surface - Table tilt angle adjustable from -10° to 45° - Integrated window for easy blade tension reading Technical data: - Wheel diameter [mm]: 680 - Max cutting height [mm]: 430 - Max cutting width [mm]: 700 - Worktable dimensions (L x W) [mm]: 790 x 500 - Table tilt [°]: -5 to 45 - Blade width [mm]: 19 - 40 - Blade length [mm]: 5020 - Blade speed [m/s]: 18 - Dimensions (L x W x H) [mm]: 1090 x 700 x 2430 - Weight [kg]: 308 - Motor power S1/S6 [kW]: 4.0 / 5.6 - Extraction ports [mm]: 2 x 100 Gisdpfjvugtnex Ahmou - Power supply: 3-phase, 400V The listed price is net. The price does not include transport costs.

Stanje: novo, Leto izdelave: 2026, CORMAK DCV Series Dust Extractors are designed for filtering primarily very fine dust particles. Engineered to deliver effortless automatic filter cleaning cycles, these units feature a motor-driven shaking system that allows the entire filter cleaning process to occur automatically within a closed circuit. Key Features of DCV Dust Extractors: - Robust, heavy-duty construction ensures quiet and vibration-free operation of the dust collector - High system tightness guarantees optimal air quality inside the facility and, during the heating season, eliminates heat loss - Powerful and quiet radial fan delivers high vacuum performance - Option to build a ceiling-mounted system, enabling connection to several machines operating simultaneously with the DCV extractors - Reliable, maintenance-free automatic filter shaking system - Mobile chassis for convenient relocation throughout the facility - Waste containers designed to maintain 99.99% airtightness of the system, equipped with a mobile handling system - Control cabinet with precise monitoring of filter contamination status and device on/off functions - Polyester filter captures particles down to 5 microns; for smaller particles, such as under 5 microns, a HEPA filter is recommended - The extractor must not be used in explosive atmospheres - Suitable for use in the woodworking industry for sawdust, shavings, and dust (not suitable for wet materials such as wet sawdust) - Before starting the extractor, remove the lower beam to allow quick access to the chip containers Giodpjuc Unqsfx Ahmou Technical Specifications: CONTINUOUS DUTY MOTOR POWER (S1): 3.0 kW ROTATIONAL SPEED: 3000 rpm EXTRACTION CAPACITY: 4500 m3/h INLET DIAMETER: 200 mm SUCTION VELOCITY: 28-32 m/s FILTER AREA: 6 m2 FILTER MATERIAL: Polyester, 5 microns NUMBER OF FILTERS: 18 DIMENSIONS: 752 x 1502 x 2200 mm WEIGHT: 200 kg

Stanje: novo, Leto izdelave: 2026, The WP300 self-centering three-jaw chuck is a specialized accessory designed for securing pipes and cylindrical or hexagonal workpieces in welding positioners and welding rotators. With its precise, self-centering clamping mechanism, it ensures reliable and accurate positioning of the workpiece during rotation, resulting in higher quality and repeatability in the welding process. Gedoycqptopfx Ahmeiu Key advantages of the WP300 chuck - Precise self-centering mechanism – enables quick and accurate centering of pipes and workpieces, eliminating the need for manual positioning. - High versatility – compatible with a wide range of welding rotators and positioners, including PS310, PS320, and PS360 models. - Clamping stability – thanks to three independent jaws, the workpiece remains securely fixed even at high rotational speeds. - Robust construction – manufactured from high-grade materials resistant to vibrations, loads, and harsh welding environments. - Optimal working diameter – capable of clamping pipes up to 270 mm in diameter, offering a broad application range. Construction and technology The WP300 model features a compact and durable steel construction suitable for intensive use. The three-jaw mechanism operates synchronously, automatically aligning the workpiece with the axis of rotation. The large external diameter (300 mm) and through-hole (100 mm) make it suitable for handling a wide range of component sizes. The mounting holes are designed to ensure full compatibility with CORMAK welding positioners. Precision and operational efficiency The WP300 chuck delivers high clamping repeatability, translating into precise circumferential welds. It shortens workpiece preparation time and reduces setup errors, increasing production efficiency and improving operator safety. The sturdy build guarantees stable performance, even with dynamic loads. Applications The WP300 chuck is intended for use in circumferential welding processes, particularly in manufacturing plants, metalworking workshops, and companies specializing in steel element prefabrication. It is suitable for welding rotators and welding positioners, enhancing their functionality and versatility. Technical specifications - Maximum pipe diameter: 270 mm - External diameter: 300 mm - Internal diameter: 100 mm - Mounting hole spacing: 105 mm - Mounting hole diameter: 9 mm - Compatible with welding positioners: PS310, PS320, PS360 - Weight: 14 kg

Stanje: novo, Leto izdelave: 2026, The WP200 self-centring three-jaw chuck is a professional accessory designed for use with welding positioners and welding rotators, such as the PS310 and PS320 models. Its precise clamping mechanism enables quick, stable, and concentric securing of pipes and workpieces with cylindrical or hexagonal cross-sections, significantly improving the efficiency and safety of circumferential welding processes. Key features of the WP200 chuck: - Self-centring three-jaw mechanism – ensures uniform and stable clamping of components regardless of their shape. - Versatility – compatible with most welding rotators and welding positioners, including CORMAK PS310 and PS320. - Precise fastening – perfect adaptation to the workpiece translates to higher weld quality and stable rotation. - Durable construction – robust, compact body made from durable materials resistant to high mechanical and thermal loads. - Compact dimensions and easy installation – low weight and accurately spaced mounting holes allow for quick integration with welding equipment. Design and technology The WP200 chuck features three high-quality jaws designed for quick and automatic centring of the workpiece along the axis of rotation. The external diameter of 200 mm and internal diameter of 80 mm allow for clamping workpieces up to 170 mm in diameter. The body is made of high-grade steel, ensuring resistance to deformation during prolonged use. Precision and performance The self-centring three-jaw mechanism of the WP200 chuck significantly reduces set-up time. Minimised play and elimination of positioning errors directly contribute to improved quality of circumferential welds. Stable clamping also provides increased operator safety. Application The WP200 chuck is intended for use with welding rotators, welding positioners, and rotary tables in the welding of pipes, flanges, rings, and cylindrical components. It is ideally suited for welding workshops, production facilities, and the structural steel industry. Giodsycqnvopfx Ahmsu Technical data Max. pipe diameter: 170 mm External diameter: 200 mm Internal diameter: 80 mm Mounting hole spacing: 85 mm Screw hole diameter: 9 mm For welding positioners: PS310, PS320 Weight: 10 kg

Stanje: novo, Leto izdelave: 2026, The Cormak VP3000 gluing press is a robust and efficient machine, perfectly suited for the production of furniture, stairs, and other wooden elements. Its steel construction ensures durability and stability, while easy adjustment and fast movement of the pressing unit provide both comfort and precision during operation. High-performance, fully adjustable hydraulic cylinders Powerful hydraulic cylinders deliver high pressing force, essential for bonding even thick and hard materials. Full adjustment of the cylinders allows for precise control of the clamping force to meet specific requirements. Hydraulic valves maintain constant pressure Hydraulic valves maintain a steady pressure throughout the entire gluing process, ensuring uniform and durable bonding of glued elements. Constant pressure guarantees safe operation and prevents material damage. Hydraulic pressure gauge included as standard The machine is equipped with a hydraulic pressure gauge, enabling real-time monitoring of the clamping force, which facilitates control over the gluing process. The gauge allows you to accurately set and maintain the desired pressure, resulting in high bonding quality. Sturdy steel construction The steel frame ensures that the device will withstand many years of intensive use. Robust materials guarantee both stability and safety when operating the machine. Easy adjustment of the pressing unit Thanks to easy adjustment, you can quickly and precisely adapt the clamping force to various materials. This translates to better work results and increased versatility of the machine. Pressure lock feature for maintaining constant force The pressure lock allows you to secure the set clamping force, which is particularly useful for repetitive tasks. Technical specifications Overall height: 2040 mm Overall width: 3000 mm Max. clamping height: 1550 mm Min. distance between pressing units: 240 mm Distance from hole to pressing unit: 50 mm Pressure: 6 x 2000 kg Dimensions: 3030 x 450 x 660 mm Total weight: 260 kg Godpjwcy U Tjfx Ahmoiu

Stanje: novo, Leto izdelave: 2026, Pallet truck with electronic scale 2500 kg – transport and weighing in a single process Key machine features - Integrated electronic scale – weigh loads directly on the pallet truck without moving goods to a stand-alone scale. - Load capacity 2500 kg – suitable for handling heavy pallets with building materials, raw materials, and oversized goods. - Weighing accuracy +/-0.5 kg – precise mass measurement even during dynamic loading operations. - Tare, sum, and piece counting functions – streamlining daily operations and order picking tasks. - Ergonomic handle – comfortable use throughout the working day. - Durable steel construction – resistant to mechanical damage and intensive operation. - Polyurethane wheels – smooth maneuverability and surface protection for warehouse floors. Design and technology The core structure is fabricated from high-grade steel, ensuring long service life and stable performance under maximum load. Forks measure 1150 mm in length and 170 mm in width, allowing secure handling and transport of most standard pallets. The 570 mm fork spacing is compatible with typical industrial logistics systems. Equipped with an electronic scale featuring a 6-digit backlit display for clear data readability even in limited lighting conditions. All components are housed in a metal, impact-resistant casing, with integrated battery and charging system. The scale meets accuracy standards of class III, making it suitable for professional and semi-commercial applications. Precision and work efficiency High-sensitivity weighing sensors and advanced control system provide quick and accurate mass readings, even for unstable loads. Tare and cumulative weighing functions offer further flexibility and control, especially in batch preparation, packing, or quantity control processes. The piece counting function streamlines logistics operations with small components. The hydraulic system operates smoothly, enabling easy lifting, and the carefully engineered control lever limits operator effort. The entire construction is optimized for heavy-duty industrial use where reliability and precision are essential. Applications This model is ideal for: - Warehouses and logistics centers – fast transport and weighing during order picking. Gsdpfew Rpdlex Ahmeiu - Production plants – controlling mass of raw materials and finished goods. - Transport and forwarding companies – minimizing errors in loading and preparing shipping paperwork. - Building material wholesalers – weighing large pallet loads without additional weighing devices. Standard equipment - Electronic scale, accuracy +/-0.5 kg, class III - Backlit LCD display (6 digits, large font) - Tare, piece counting, and weighing sum functions - Battery and charger included - Steel forks (dimensions: 1150x170 mm) - Steel construction resistant to deformation - Polyurethane wheels – durable, quiet, and floor safe Technical parameters Max. lifting capacity: 2500 kg Fork width (between arms): 570 mm Fork length: 1150 mm Fork width: 170 mm Dimensions (L x W x H): 1570x570x1205 mm Weight: 89 kg

Stanje: novo, Leto izdelave: 2026, The compact CORMAK HRN50209 roller conveyor is a functional transport solution designed for efficient movement of loads with smooth bases in industrial, warehouse, and production environments. With adjustable length and height, a robust steel construction, and a load capacity of up to 200 kg, this model ensures flexible adaptation to various workstations and stable operation in multiple applications. It is a solution for companies needing a simple, durable, and mobile internal transport system. The CORMAK HRN50209 roller conveyor streamlines material flow, reduces load handling time, and allows quick adjustment of the transport layout to current plant requirements. Key machine features - Adjustable length: 820–2090 mm – easy adaptation to the available space and transport line requirements. - Adjustable height: 670–940 mm – enables ergonomic working height settings. - Load capacity up to 200 kg – safe transport of heavier boxes, crates, wooden elements, and other materials. - Mobile design with lockable wheels – fast relocation of the conveyor and stabilization during operation. - Braces between legs – enhanced rigidity and stability of the entire structure. - Possibility of combining multiple modules – construction of customized transport lines. - Delivered assembled – quick deployment without time-consuming installation. Construction and technology Robust steel construction The FLOW roller conveyor is manufactured from durable steel, ensuring high resistance to working loads and daily use in industrial environments. The steel frame withstands intensive use while providing stable guidance for transported materials. The steel rollers, 50 mm in diameter, enable smooth movement of goods without the need for a drive unit. This solution is particularly effective where ease of use, reliability, and flexible deployment across various zones of a facility are crucial. Length and height adjustment One of the key advantages of the CORMAK HRN50209 model is its wide adjustment range. Working length from 820 to 2090 mm allows precise adaptation to specific workstations, while a height range of 670–940 mm facilitates integration with other equipment, such as worktables, shelving, packing stations, or production line segments. Standard equipment - Steel load-bearing frame - 12 steel rollers - Length adjustment - Height adjustment - 4 castor wheels - Wheel locking mechanism - Reinforcing braces between legs - Device delivered assembled Gsdpfx Aoyuu Anohmjiu Technical specifications Length range: 820–2090 mm Width: 510 mm Load area width: 510 mm Roller diameter: 50 mm Minimum height: 670 mm Maximum height: 940 mm Frame material: Steel Roller/wheel material: Steel Maximum load capacity: 200 kg Weight: 51.51 kg