Broetje Automation Staxx C1700 nakup rabljenega (12.917)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, With documentation, an on-site inspection is possible. Bsdpfxsf Ddrlj Agtedb

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), A bottle packer A+F Contiflex with integrated tray former A+F Multiformer is available. Maximum output capacity: 220 bottles/min, connected load: 14 kW, length: 7,789 mm, width: 1,977 mm, height: 3,284 mm, operating hours: approx. 600 h. Complete documentation is included. An inspection is possible. Bodom Nckfspfx Agtodb

Stanje: dober (rabljeno), WSM Stationary Screwdriving Unit Screwdriving Station Assembly of components for car radios and navigation systems, as well as testing these units. Bdedpfx Asibichjgteb The assembly station is enclosed by a protective housing. The service doors are equipped with monitored locking switches (interlocks). During automatic operation, the doors are locked and can only be opened during an automatic stop or in manual mode after pressing the 'Door' button on the control panel. Automatic operation cannot be started when a door is open. Functional Sequence The station is loaded via the transfer conveyor with the pre-assembled module. Below is a description of the steps performed in the automatic station during the processing of one workpiece carrier (WT). In normal operation, all 3 stations run in parallel. - Positioning the WT with the pre-assembled module in station 2.1 - Lowering of the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), cross-check with the database - Verifying correct latching of the FFC (flexible flat cable) in the connector - Raising the carrier and lowering the WT onto the conveyor belt - Positioning the WT with the pre-assembled module in station 2.2 - Positioning the screwdriver and fastening the front PCB - Lowering the WT onto the conveyor belt - Positioning the WT with the pre-assembled module in station 2.3 - Lowering the light protection hood and contacting, moving the carrier with the test sensors from below - Type-specific testing of the illumination of SD + CD slots and keys - Function test of the CD eject button - Lowering the WT onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen and can be rectified if possible. To do this, switch to manual mode and open the doors. After repair and restarting automatic operation, the WT is checked again in the station. If repair is not possible (e.g., screwdriving error), the WT is marked as NIO (not OK) in the control system and is no longer processed. Manual NIO marking and discharge is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de Additional new and used assembly stations—find them in our shop! International shipping costs on request!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, 1 unit used IML system with removal unit, depositing onto conveyor belt for horizontal stacking Manufacturer: Beck Automation AG Bodpfewuln Njx Agtsdb Model: B32 Year of manufacture: 2019

Leto izdelave: 2022, stanje: novo, We offer oil coolers designed to reduce cutting oil temperature during operation on CNC lathes. The unit is brand new. Temperature range: 5 to 40 °C Flow rate: 40 liters per minute If you have any questions, we are happy to assist you. Bdjdpfxelzghpe Agtjb Did you know? The exhaust air from the cooler can also help reduce heating costs, as the dissipated heat is immediately released into the surrounding environment.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.350 mm, skupna višina: 2.420 mm, skupna dolžina: 3.600 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, moč: 1,6 kW (2,18 KM), raven hrupa: 75 dB, Splošno: Natančna konfokalna merilna postaja za optično merjenje višine in strukture. Opremljena s konfokalnim senzorjem PD562 in merilno kamero PD563. Sistem je namenjen visokoločljivostnemu merjenju površin in geometrije. Bdodpfx Aox Ap I Hegtjb

Stanje: rabljeno, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Feeder RNA Vibratory bowl, sorting unit / screw feeding system with vibratory feeder for screw technology Feeding system, feeder device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-B200-2L Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Mains connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24VDC power supply). - Control unit REO type Reovib R6 / 439 for adjustable vibration speed - The feeder was previously used for the supply of automotive blade fuses - Mounted on a base made of aluminium profile system Space requirement Ø x H: 240 x 250 mm Weight: 17 kg Good condition Bjdpfxjxrgvmo Agtsdb A vibratory bowl feeder always consists of two essential components: 1) Sorting bowl which orients the parts 2) Drive unit, which generates vibrations in the sorting bowl through mechanical oscillations, causing the parts to move.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, obratovalne ure: 240 h, vrsta upravljanja: CNC krmiljenje, proizvajalec krmilnikov: Hypertherm, model krmilnika: Edge Connect TC, najv. debelina jeklene pločevine: 40 mm, delovna dolžina: 3.000 mm, delovna širina: 1.500 mm, natančnost pozicioniranja: 0,05 mm, natančnost ponavljanja: 0,05 mm, teža obdelovanca (maks.): 5.000 kg, trajanje garancije: 12 meseci, Uporabljen Esprit Automation CNC plazemski rezalnik – visokoločljivostni XPR170 Ta CNC plazemska rezalna naprava proizvajalca Esprit Automation je v izjemno ohranjenem, skoraj novem stanju z manj kot 300 obratovalnimi urami. Zgrajena za natančnost in zanesljivost, opremljena z visokoločljivostnim plazemskim virom Hypertherm XPR170, zagotavlja vrhunsko kakovost reza in zmogljivost pri širokem naboru materialov. Bdodoyzuw Topfx Agteb Glavne tehnične lastnosti: Območje rezanja: 3000 x 1500 mm Plazemski vir: Hypertherm XPR170 (visoka ločljivost) Plinski sistem: Vključen VWI plinski modul Zmogljivost prebijanja: do 40 mm konstrukcijsko jeklo Obratovalne ure: < 300 ur Stanje: Naprava je v vrhunskem stanju, uporabljena zelo malo v kontroliranem okolju. Popolnoma vzdrževana in pripravljena za takojšnje obratovanje. Dodatne informacije: 12-mesečna garancija na rezervne dele vključena Idealna za precizno obdelavo, strojništvo in proizvodnjo Odlična priložnost za nakup vrhunskega CNC plazemskega sistema za del cene novega stroja.

Stanje: rabljeno, Vibratory Bowl Feeder / Sorting Unit / Bowl Feeder / Vibratory Feeder RNA Vibratory Bowl, Sorting Device / Screw Feeding System with Vibratory Feeder for Screwdriving Technology Feeding System, Feeder Unit Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2R Year of Manufacture: approx. 2000 Bowl Diameter (top): 200 mm Bowl Diameter (bottom): 130 mm Bowl Inner Height: approx. 25 mm Sorting Track Width: approx. 3 mm Bsdpfexw Rdlex Agtedb Overall Height (Drive + Bowl with Sorting Track): 225 mm Control Voltage: 24 V DC (external power supply required) Mains Connection: 230 V, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller has no internal 24VDC power unit). - Control unit REO Type Reovib R6 / 439 for adjustable vibration speed - The feeder was previously used for feeding automotive blade fuses - Mounted on an aluminium profile stand Space requirement (Ø x H): 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two essential components: 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which generates mechanical oscillations to vibrate the sorting bowl and thus set the parts in motion.

Stanje: rabljeno, Convoyeur à spirale vibrante / appareil de tri / convoyeur à spirale / alimentateur vibrant RNA Bol vibrant, appareil de tri / alimentation de vis avec alimentateur vibrant pour la technologie de vissage Système d’alimentation, appareil d’alimentation Fabricant : RNA Rhein-Nadel Automation GmbH Type SRC-B200-2L Année de construction : env. 2000 Diamètre supérieur du bol : 250 mm Diamètre inférieur du bol : 190 mm Hauteur intérieure du bol : env. 35 mm Largeur de la voie de tri : env. 3 mm Hauteur totale (entraînement + bol avec voie de tri) : 240 mm Raccordement électrique : 230 V, 50 Hz - Régulateur RNA, type ESG 90 pour vitesse de vibration réglable Bsdpfx Aexf Urpsgtodb - Le convoyeur a été utilisé pour l’alimentation de fusibles automobiles à languette Encombrement Ø x H : 250 x 240 mm Poids : 13,5 kg Bon état Un convoyeur à spirale se compose toujours de deux éléments essentiels. 1) Bol de tri, dans lequel les pièces sont orientées 2) Entraînement, qui génère des vibrations dans le bol de tri par des oscillations mécaniques et met ainsi les pièces en mouvement.

Stanje: rabljeno, Vibračný špirálový podávač / Triediace zariadenie / Špirálový podávač / Vibračný podávač RNA Vibračná miska, triediace zariadenie / podávanie skrutiek vibračným podávačom pre skrutkovaciu techniku Podávací systém, podávacie zariadenie Výrobca: RNA Rhein-Nadel Automation GmbH Bjdpfx Asux Shvjgtjdb Typ: SRC-N 250-2L Sériové číslo: Rok výroby: cca 2000 Priemer misky dole: 300 mm Priemer misky hore: 350 mm Vnútorná výška misky: cca 25 mm Šírka triediacej dráhy: cca 30 mm Celková výška (pohon + miska s triediacou dráhou): 380 mm Frekvencia vibrácií: 100 Hz / 6000 ot./min. Napájanie: 230 voltov, 50 Hz - Riadiaca jednotka RNA, typ ESG 90, pre nastaviteľnú rýchlosť vibrácií - Podávač bol používaný na podávanie automobilových tavných poistiek Pôdorys (Ø x V): 420 x 390 mm Hmotnosť: 52 kg Dobrý stav Špirálový podávač sa vždy skladá z dvoch hlavných komponentov: 1) Triediaca miska, v ktorej sa diely orientujú 2) Pohon, ktorý mechanickými kmitmi vytvára vibrácie v triediacej miske a tým uvádza diely do pohybu.

Stanje: rabljeno, Vibratory Bowl Feeder / Sorting Device / Spiral Feeder / Vibratory Feeder RNA Vibrating Bowl, Sorting Device / Screw Feeding with Vibratory Feeder for Screw Technology Feeding System, Feeding Device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl Diameter (lower): 250 mm Bowl Diameter (upper): 380 mm Bowl Internal Height: approx. 70 mm Sorting Track Width: 30 mm Total Height (Drive + Bowl with Sorting Track): 390 mm Vibration Frequency: 100 Hz / 6,000 rpm Power Supply: 230 Volt, 50 Hz - RNA Control Unit, Type ESG 90 for adjustable vibration speed - Vibrating bowl with rubber lining - The feeder was used for feeding automotive blade fuses Required Footprint Ø x H: 420 x 390 mm Weight: 50 kg Good condition A vibratory bowl feeder always consists of two essential components: 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which generates vibrations in the sorting bowl through mechanical oscillations, thereby moving the parts along. Bodpeuqrahjfx Agtsdb

Stanje: rabljeno, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Feeder RNA Vibratory Bowl, Sorting Unit / Screw Feeding with Vibratory Feeder for Screwdriving Technology Feeding System, Feeding Device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-B200-2R Bodpou Ailgjfx Agtodb Year of manufacture: approx. 2000 Bowl diameter upper: 300 mm Bowl diameter lower: 180 mm Bowl internal height: approx. 45 mm Sorting track width: approx. 5 mm Total height (drive + bowl with sorting track): 260 mm Mains connection: 230 Volt, 50 Hz. - RNA Control Unit, Type ESG 90 for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 300 x 260 mm Weight: 14 kg Good condition A vibratory bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates vibrations in the sorting bowl by mechanical oscillations and thereby moves the parts.

Stanje: pripravljen za uporabo (rabljen), BR-Automation 5PP120.1043-37A Power Panel, serijska številka po fotografiji, rabljen, zaščitna folija zaslona poškodovana (glej sliko 2), sicer običajne sledi uporabe, 100 % delujoč, obseg dobave po fotografijah. Bdjdpoi D Ukuefx Agtsb

Stanje: pripravljen za uporabo (rabljen), BR Automation 5PP120.1043-37A Power Panel, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as shown in photos. Bedpfx Aei D Uitjgtsdb

Stanje: dober (rabljeno), Leto izdelave: 2003, Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, geared motor - Manufacturer: CR Electronic S.R.L / Power Automation, servo drive for plasma/oxygen cutting system Bodpfx Aewkqmiegtodb - Cutting system: Type OXY 5.1 - 25 - Servo motor: Power Automation Type PAT3B-S4-SRM50 - Individual components: see photos - Quantity: 2x drive units available - Sale/price: per unit - Dimensions: 475/240/H140 mm - Weight: 12.4 kg/unit

Stanje: dober (rabljeno), CNC Control, Control Rack, Electronic Module Bjdjwt R Iropfx Agtodb - Manufacturer: Power Automation / Innovance Technology, control system - Type: Exchange unit Part No. 181998 - Individual components: see photos - Dimensions: 255/330/H140 mm - Weight: 5.7 kg

Stanje: dober (rabljeno), Leto izdelave: 2008, CNC control system, control rack, electronic module - Manufacturer: Power Automation / Innovance Technology, CNC control system - Model: PA8000 LW - Dimensions: 330/250/H130 mm Bdjdpfjwubtnox Agtob - Weight: 5.7 kg

Leto izdelave: 2011, stanje: rabljeno, Packaging Automation PA182 pladenska varilica iz nerjavečega jekla, dvopostajna rotacijska miza, do 40 pladnjev na minuto, mobilna izvedba, trenutno orodje za pladnje velikosti 210 mm x 165 mm. Bdjdpfodbqtqex Agtsb

Stanje: pripravljen za uporabo (rabljen), BR-Automation 5PP120.1043-37A Power Panel, serijska številka po fotografiji, rabljen, zaščitna folija zaslona poškodovana (glej sliko 2), sicer običajne sledi uporabe, 100 % delujoč, obseg dobave po fotografijah. Bodpfei D Uh Isx Agtedb

Leto izdelave: 2020, stanje: kot nova (razstavni stroj), Here we offer you a resistance welding system. The system is designed for automated resistance welding of the following connections: - Housing + QLT - Housing + Heater Service Unit P450 - Welding pump + Flange P 800 The system is loaded and unloaded manually by an operator. Any use of the system other than as described above is not intended and therefore not permitted! System layout: - Welding unit - Sledge unit - Electrode cleaning unit - Base - Linear unit - DMC analysis unit Dimensions (L x W) mm: 1700 x 1200 Cycle time, sec.: ≤ 30 - 35 Technical availability, %: ≥ 95 Number of operators: 1 Voltage, V: 400 AC Frequency, Hz: 50 Control voltage, V: 24 DC Pre-fuse, A: 50 Bdodpfxsht U Sne Agteb Rated current, A: approx. 17 Compressed air supply, bar: 6 Year of manufacture: 2020 Components of the system: - Control cabinet - Safety enclosure - Linear unit -- Toothed belt axis: Festo DGE-25-700-ZR-LKRV -- Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN -- Gear ratio: i=5 -- Feed constant: 63 mm/rev -- Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit -- Balluff BES M08EC-PSC15B-S49G - DMC analysis unit: Keyence SR-1000 - Welding unit -- Horizontal spindle axis --- Compact Module CKK 110-250 without brake --- Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN --- i=1 --- p=5 mm --- Integrated reference switch: Hall PNP NO contact -- Vertical spindle axis --- Compact Module CKK 110-100 with brake --- Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN --- i=1 --- p=5 mm --- Integrated reference switch: Hall PNP NO contact -- Welding tongs --- Crede PSZ-K --- Control: ST-T13V2.0 --- Power module: LT-L05-T13V13.0 (5,000A) --- Water cooler: DLK 1002-C --- Interface: ProfiNet - Proportional valve block PVB V1.0 - Adapter box AB V3.0 for SZ and PSZ - Extraction unit -- TBH GmbH GL 265 Z - Flow monitor -- Turck GmbH & Co. KG FCS-M18-AP8X -- Type: BDE11154003 Condition: unused, the machine has never been put into productive operation Delivery scope: (see picture) (Subject to change and errors in technical data and specifications!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 770 mm, pomik po osi Z: 1.400 mm, Osi: X = 2000 mm Y = 770 mm Z = 1400 mm Popolnoma funkcionalno, iz tekoče proizvodnje. Na voljo dva kosa. Bedpfsyc E H Tjx Agtsdb Cena: 5.500 EUR na kos.

Stanje: dober (rabljeno), The following components from B&R Automation are for sale: - Power Panel 120 Bdjdpfxort T Awj Agteb - CPU CP476 Both units were removed in 08/2022 and were fully functional up to that point without any issues.

Stanje: dober (rabljeno), servo drive, servo card, output module, CPU board, input processor, power supply, control card, input board, control unit, converter, controller - Manufacturer: Power Automation, Servo Controller Bdsdswt Rzlepfx Agtjb - Type: MI305 - Dimensions: 300/115/H250 mm - Weight: 3.8 kg/unit

Stanje: dober (rabljeno), Conveyor belt, belt conveyor, transport belt, belt conveyor system, steep conveyor, steep belt conveyor, slat conveyor - Manufacturer: FAPRO Automation, slat conveyor mounted on a mobile chassis - Speed: 12 m/min - Conveyor belt width: 600 mm - Conveyor belt length: 2570 mm, dimensions as per technical drawing in photo Bdodpfx Ajpix Nyjgtob - Discharge height: 1225 mm - Transport dimensions: 2600/690/H1225 mm - Weight: 120 kg