70 Rahmen 4 M Hoch, 224 Traversen (2700) Ca.158 M, 2 Eb./2T - Total-Regal nakup rabljenega (124.474)

Stanje: rabljeno, Ta rabljena META regalna polica s policami je kompaktna in prilagodljiva rešitev za skladiščenje v delavnici, skladišču, arhivu in podjetju. Z višino 250 cm, globino 40 cm in skupaj 6 skladiščnimi nivoji regal nudi dovolj prostora za pregledno shranjevanje škatel, zabojnikov, rezervnih delov in drugega skladiščnega blaga. Modularni regalni sistem omogoča vsestransko uporabo in učinkovito izrabo razpoložljive skladiščne površine. 3,06 tekočih metrov polic, globina 40 cm, rabljeno, regali za delavnice, skladiščni regali, ročni skladiščni regali, sestavljivi regali, regali za drobni material Tehnični podatki: - Višina: cca 250 cm - Globina: cca 40 cm - Dolžina: cca 3,06 tekočih metrov Ponudba regala 1,06 tekočih metrov, sestavljena iz: - 04 x stojalo cca 200 x 40 cm, predmontirano - 18 x polica cca 100 x 40 cm - 72 x nosilec police - 03 x diagonalna vez - Proizvajalec: META CLIP - Nosilnost: 100 kg na polico, pri enakomerni porazdelitvi tovora - Nivoji: 6 x skladiščnih nivojev - Površina: sendzimir pocinkano - Rabljeno, na zalogi -- TAKOJ NA VOLJO VEČ KOSOV -- Cena: 253,00 € neto + zakonsko predpisan DDV Prejmete račun z izkazanim DDV. Transport: Po želji dostava z našo partnersko špedicijo, stroški so odvisni od poštne številke. Dcedpfx Adszrup Ijijk Montaža: Po potrebi vam naše usposobljeno osebje strokovno zmontira ali demontira opremo vaše poslovalnice. Naše priporočilo: Sporočite nam vaše potrebe… Z veseljem vam pomagamo od načrtovanja in naročila do montaže pri realizaciji vaših projektov. Ste zainteresirani ali imate vprašanja? Kontaktirajte nas preko sporočila ali telefona. Našo telefonsko številko najdete na naši spletni strani podjetja. ☎️ Dosegljivi smo od ponedeljka do petka, 08:00–15:00. Lahko nam pošljete tudi sporočilo z vašim imenom in telefonsko številko in poklicali vas bomo v najkrajšem možnem času.

Stanje: novo, 30.06 linear meters of shelving racks, 40 cm deep, workshop racks, storage racks, wide-span shelving, manual storage, shelving racks, small parts storage. Specifications: - Height: approx. 200 cm - Depth: approx. 40 cm - Length: approx. 30.06 linear meters Rack package 30.06 lfm consisting of: - 031 uprights approx. 200 x 40 cm, disassembled (incl. 2 x base plates & 2 x end caps per upright) - 150 shelves approx. 100 x 40 cm - 600 shelf supports - 031 cross braces 1176 mm (for bracing) - 031 turnbuckles (for bracing) - Manufacturer: META CLIP - Load capacity: 150 kg per shelf with evenly distributed load - Levels: 5 storage levels - Finish: sendzimir galvanized - New goods ex stock - Made in Germany - 100% quality at the best price Pre-assembly of frames can be carried out by us for a small surcharge of €2/net per piece. -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €3,661.00 net plus legally applicable VAT You will receive an invoice with VAT statement. Transport: Delivery can be arranged via our partner forwarding company on request, shipping costs are postcode-dependent. Assembly: Our trained staff are available to provide professional assembly and disassembly of your facility on request. Our recommendation: Let us know your requirements… We are happy to assist you in realizing your projects, from planning to ordering and assembly. Dodpezrul Ajfx Adijck

Stanje: novo, 60.06 linear meters of shelf racks, 40 cm deep: workshop shelving, storage shelves, wide span shelves, hand storage, shelving for small parts. Specifications: - Height: approx. 200 cm - Depth: approx. 40 cm - Length: approx. 60.06 linear meters Shelf rack package 60.06 lm consisting of: - 61 uprights approx. 200 x 40 cm, disassembled (incl. 2 feet & 2 top caps each) - 300 shelves approx. 100 x 40 cm - 1,200 shelf supports - 61 diagonal braces 1,176 mm (for cross bracing) - 61 turnbuckles (for cross bracing) - Manufacturer: META CLIP - Load capacity: 150 kg per shelf with evenly distributed load - Levels: 5 storage levels - Surface: sendzimir galvanized - New stock from warehouse - Made in Germany - 100% quality at the best price Frame pre-assembly can be carried out by us for a small extra charge of €2/net per unit. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €5,610.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Transport: Delivery is arranged by our partner freight forwarder upon request, costs depend on postal code. Assembly: Dcodpozrulisfx Adiok Our trained staff is available to provide professional assembly and disassembly of your warehouse equipment if required. Our recommendation: Let us know your requirements... We are happy to support you with your project—from planning and ordering through to installation.

Stanje: rabljeno, Ta rabljena META polična regalna enota predstavlja kompaktno in prilagodljivo skladiščno rešitev za delavnice, skladišča, arhive in podjetja. Z višino 250 cm, globino 40 cm in skupno 6 skladiščnimi nivoji regal ponuja dovolj prostora za pregledno shranjevanje škatel, zabojnikov, rezervnih delov in drugih skladiščnih artiklov. Modularni regalni sistem omogoča vsestransko uporabo ter učinkovito izrabo razpoložljive skladiščne površine. 8,06 tekočih metrov polic, globina 40 cm, rabljeno, regali za delavnice, skladiščni regali, ročni skladiščni regali, sestavljivi regali, regali za drobni material Dcjdozruk Sspfx Adisk Podatki: - Višina: pribl. 250 cm - Globina: pribl. 40 cm - Dolžina: pribl. 8,06 tekočih metrov Ponudba regala 8,06 tekočih metrov, sestava: - 09 x stojala pribl. 200 x 40 cm, predmontirana - 48 x police pribl. 100 x 40 cm - 192 x nosilec police - 08 x križni oporni trak - Proizvajalec: META CLIP - Nosilnost: 100 kg na polico, pri enakomerno porazdeljeni teži - Število nivojev: 6 - Površina: sendzimir pocinkano - Rabljeno, takoj dobavljivo iz zaloge -- VEČKRAT NA VOLJO -- Cena: 643,00 € neto + zakonsko določeni DDV Prejmete račun z ločeno obračunanim DDV. Transport: Dostavo po želji izvede naš partnerski prevoznik, stroški so odvisni od poštne številke. Montaža: Naša usposobljena ekipa vam je po potrebi na voljo za strokovno montažo in demontažo vaše opreme. Naše priporočilo: Sporočite nam vaše potrebe ... Z veseljem vam pomagamo pri izpeljavi vaših projektov, od načrtovanja do naročila in montaže. Imate vprašanja ali ste zainteresirani? Kontaktirajte nas preko sporočila ali nas pokličite. Našo telefonsko številko najdete na strani našega podjetja. ☎️ Dosegljivi smo po telefonu od ponedeljka do petka, od 08:00 do 15:00 ure. Lahko nam pošljete tudi sporočilo s svojim imenom in telefonsko številko in odgovorili vam bomo v najkrajšem možnem času.

Stanje: novo, Leto izdelave: 2022, 7.65 linear meters Wide-Span Racking, 80 cm Deep Specifications: - Height: approx. 200 cm Dodpfozrvvpox Adisck - Depth: approx. 80 cm - Length: approx. 9.56 linear meters Racking set includes: - 05 x frames approx. 200 x 60 cm, disassembled - 32 x beams approx. 185 cm - 16 x shelf panels approx. 184.5 x 79.5 cm - 32 x cross braces (approx. 80 cm, galvanized) - incl. safety pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per bay, with evenly distributed load - Levels: 4 storage levels - Chipboard shelves, natural finish - Uprights in blue - New stock available from warehouse - Other quantities available! Pre-assembly of the frames can be carried out by us for a small surcharge of €6/net per piece. Delivery available on request at competitive rates. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €1,001.00 net plus legally applicable VAT. You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged via our partner freight forwarders on request, costs depend on the destination postcode. Assembly: Our trained staff are available to assist you with professional assembly and disassembly of your warehouse equipment, if required. Our recommendation: Let us know your requirements... We are happy to support you with your projects, from planning and ordering through to installation.

Stanje: novo, Leto izdelave: 2022, 13.35 m Longspan Shelving System 80 cm Deep, Workshop Shelving, Storage Shelving, Large-Compartment Shelving, Manual Storage, Shelf Racking, Small Parts Storage Technical Data: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 13.35 m The racking offer consists of: - 08 x Uprights approx. 200 x 80 cm, disassembled - 56 x Beams approx. 185 cm - 28 x Shelves approx. 184.5 x 79.5 cm - 56 x Crossbars / Load distributors - Including locking pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf, with evenly distributed load - Levels: 4 storage levels - Particle board, natural finish - Uprights blue - Crossbars galvanized - New from stock - Other quantities available! Dedszrvvispfx Adieck Pre-assembly of the uprights can be carried out by us for a small extra charge of €6 net per item. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €1,724.00 net plus statutory VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged by our partner forwarding company upon request; shipping costs depend on your postal code. Assembly: Our trained staff are available to assist you with the professional assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to support you with the realization of your project, from planning and ordering to complete installation.

Stanje: novo, Leto izdelave: 2022, 57 linear meters of wide-span shelving, 60 cm deep, workshop shelving, warehouse shelving, large compartment shelving, manual storage, shelving units, small parts storage, Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 57 linear meters Dcsdpfjzrvuxjx Adijk Shelving package includes: - 031 x frames approx. 200 x 60 cm, dismantled - 240 x beams approx. 185 cm - 120 x shelf panels approx. 184.5 x 59.5 cm - Including safety pins - Model: BLT, Type WR20/60 - Load capacity: 400 kg per compartment, with evenly distributed load - Levels: 4 storage levels - Chipboard shelves, natural finish - Uprights blue - New stock, available ex warehouse - Other quantities available! Pre-assembly of frames can be provided by us for a small additional charge of €6.00/net per piece. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €5,885.00 net plus applicable VAT You will receive an invoice with stated VAT. Transport: Delivery can be arranged by our partner forwarding company upon request. Costs depend on postal code. Assembly: Our trained staff will be happy to assist with the professional assembly and disassembly of your equipment if required. Our recommendation: Let us know your requirements… We are happy to support you with your projects—from planning and ordering to assembly.

Stanje: novo, Leto izdelave: 2020, Cantilever Racking NEW STOCK Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK available immediately from stock. - 750 kg load capacity per arm - 2250 kg load capacity per upright - Uprights are hot-dip galvanized. - Cantilever arms are hot-dip galvanized. - Arms are bolted on. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels total) Rack consists of: - 04 x uprights, approx. 300 cm incl. base, made from IPE160 - 12 x cantilever arms, approx. 120 cm, made from IPE100 - incl. all necessary connecting elements and bolts Why BLT Cantilever Racks? - Certified German manufacturer DIN EN 1090 – Made in Germany - All stated load capacities for uprights and cantilever arms are statically verifiable at 100% load - All racking systems are supplied in hot-dip galvanized finish. Suitable for indoor and outdoor use, and unlike painted systems, they do not rust. Consistent appearance for many years. Dsdpfozrvdtsx Adisck - We use legally mandated hot-dip galvanized bolt assemblies according to DIN EN 15048-1 - Long-term availability of spare parts - Upright base and upright back are welded together, providing additional security and reducing assembly time, as feet do not need to be bolted to the upright back - Bracing made from angle steel – no tension rods necessary, which shortens assembly times - No slotted hole system – this means no weakening of the upright profile Price: €2,404.00 net + legally applicable VAT You will receive an invoice with VAT shown separately. Accessories such as floor anchors, impact protection, etc., can also be purchased from us. Transport: Delivery can be arranged via our partner freight forwarder; costs depend on postal code. Assembly: Our trained personnel are available to assist with professional assembly and dismantling of your facility, if required. Our recommendation: Let us know your requirements... We are happy to help realize your projects from planning to ordering to installation.

Stanje: novo, Leto izdelave: 2020, Cantilever Racking NEW STOCK Specifications: - Height: approx. 416 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK, immediately available from stock. - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized Dedpfx Adjzrvb Soisck - Cantilever arms hot-dip galvanized - Arms are bolted - Arms height-adjustable in 100 mm increments - Levels: Base + 3 storage levels (4 storage levels in total) Racking consists of: - 04 x uprights incl. base, approx. 416 cm made from IPE160 - 12 x cantilever arms, approx. 120 cm made from IPE 80 - Including all necessary connecting elements and bolts Why BLT Cantilever Racking? - Certified German manufacturer – DIN EN 1090 – Made in Germany - All stated load capacities for frames and arms are statically verified at 100% load. - All racking systems are delivered hot-dip galvanized. Suitable for indoor and outdoor use, and won’t rust like painted racks. Consistent appearance for many years. - We use legally required hot-dip galvanized bolt sets according to DIN EN 15048-1 - Long-term availability guarantee for spare parts - Base and spine of upright are welded together, ensuring maximum safety and reduced assembly time, as there’s no need to bolt the base to the upright separately - Bracing made from angle steel means there’s no adjustment required via turnbuckles, further shortening assembly times - No slotted hole system, ensuring no weakening of the upright profile Price: EUR 2,578.00 net + VAT as required by law. You will receive an invoice with VAT shown separately. Accessories such as floor anchors, impact protection, etc., are also available from us. Transport: Delivery can be arranged by our partner forwarding company on request, with shipping costs depending on postal code. Installation: Our trained staff are available to assist you with professional assembly and disassembly of your warehouse equipment as needed. Our recommendation: Let us know your requirements… We are pleased to help you realize your projects, from planning and ordering to installation.

Stanje: novo, Leto izdelave: 2022, Cantilever Racking NEW Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle distance: 131 cm - NEW, immediately available from stock. - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized. - Cantilever arms hot-dip galvanized. - Arms bolted. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels total) Racking consists of: - 4 x uprights, incl. base, approx. 300 cm, made of IPE160 - 12 x cantilever arms, approx. 120 cm, made of IPE80 - Incl. all necessary connecting elements and bolts. Why choose BLT cantilever racking? - Certified German manufacturer DIN EN 1090 – Made in Germany - All stated load capacities for uprights and cantilever arms are statically verified at 100% capacity. - All racking is supplied in hot-dip galvanized finish. Suitable for both indoor and outdoor use, does not rust like painted racks. Maintains consistent appearance for many years. - We use legally required hot-dip galvanized bolt sets in accordance with DIN EN 15048-1 - Long-term aftermarket guarantee - Upright foot and upright back are welded together, providing extra safety and reducing assembly time as the feet do not need to be bolted separately to the upright backs. - Bracing made from angle steel eliminates the need for adjustable turnbuckles, thus shortening assembly time. - No slotted hole system, meaning no weakening of the upright profile. Price: €2,265.00 net + applicable statutory VAT You will receive an invoice with VAT shown separately. Dedezrvb Eepfx Adijck Transport: Delivery by our partner freight forwarder on request, costs depend on postal code. Assembly: Our trained staff are happy to assist with the professional assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly.

Stanje: novo, Leto izdelave: 2022, Cantilever Rack – NEW STOCK Specifications: - Height (H): approx. 400 cm - Depth (T): approx. 137 cm - Length (L): approx. 402 cm - Cantilever Arms: approx. 120 cm - Axle dimension: 131 cm - BRAND NEW, immediately available from stock. - 500 kg load capacity per arm - 2,250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 3 storage levels (4 storage levels total) Rack includes: - 4x uprights, incl. base, approx. 400 cm, made from IPE160 - 12x cantilever arms, approx. 120 cm, made from IPE80 - incl. all necessary connecting elements and bolts Why choose BLT Cantilever Racks? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All stated load capacities for uprights and arms are structurally verified at 100% load - All racking systems supplied in hot-dip galvanized finish. Suitable for indoor and outdoor use and will not rust like painted systems. Consistent appearance for many years. - We use legally required hot-dip galvanized bolt assemblies in accordance with DIN EN 15048-1 - Long-term spare parts availability - Upright base and rear are welded for added safety and reduced installation times, as the bases do not need bolting to the upright backs - Bracings made from angle steel, no adjustment via turnbuckles required; this reduces installation time - No elongated hole system, so the upright profile is not weakened Dodpfxozrvblo Adisck Price: €2,462.00 net + VAT as legally required. You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged via our partner freight forwarder; costs depend on your postal code. Installation: Our trained personnel are available to assist you with professional installation and dismantling of your facility if required. Our recommendation: Let us know your requirements… We are happy to assist you with your projects, from planning and ordering to installation.

Stanje: novo, Leto izdelave: 2020, Cantilever rack NEW STOCK Specifications: - Height: approx. 416 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK, immediately available from stock. - 750 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments - Levels: base + 3 storage levels (4 storage levels total) Rack consists of: - 04 x uprights incl. base approx. 416 cm made from IPE160 - 12 x cantilever arms approx. 120 cm made from IPE100 - incl. all necessary connecting elements and bolts Why choose BLT cantilever racks? - Certified German manufacturer according to DIN EN 1090 – Made in Germany - All specified load capacities for uprights and arms are statically verified at 100% load - All racking systems are supplied in hot-dip galvanized finish. This makes them suitable for both indoor and outdoor use and unlike painted systems, they will not rust. Consistent appearance for many years Dedpfx Adezrutaoisck - We use legally approved hot-dip galvanized bolt sets according to DIN EN 15048-1 - Extended repurchase guarantee - Upright base and rear are welded together for additional safety and reduced assembly times, as the foot does not need to be bolted separately to the upright - Bracing made from angle steel eliminates the need for adjustment with turnbuckles, shortening assembly time - No slotted hole system, so there is no weakening of the upright profile Price: €2,631.00 net + statutory VAT You will receive an invoice showing VAT separately. Accessories such as floor anchors, impact protection, etc. are also available from us. Our recommendation: Let us know your requirements... We are happy to assist you with the implementation of your projects, from planning and ordering to assembly. Delivery possible at a favorable rate upon request.

Stanje: novo, Leto izdelave: 2022, Cantilever Racking NEW STOCK Specifications: - Height: approx. 350 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK, available immediately from stock. - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized. - Cantilever arms hot-dip galvanized. - Arms are bolt-on. - Arms adjustable in 100 mm increments. Dcodpjzrurpsfx Adiok - Levels: base + 3 storage levels (4 storage levels total) Rack consists of: - 04 x uprights, incl. base approx. 350 cm, made of IPE160. - 12 x cantilever arms approx. 120 cm, made of IPE80. - Incl. all necessary connecting elements and bolts. Why choose BLT Cantilever Racking? - Certified German manufacturer according to DIN EN 1090 – Made in Germany - All specified load capacities for both uprights and arms are statically verifiable at 100% load. - All racking systems supplied in hot-dip galvanized finish. Can be installed indoors or outdoors, and do not rust like painted systems. Consistent appearance for many years. - We use legally required hot-dip galvanized fastener assemblies according to DIN EN 15048-1 - Long-term availability of spare parts - Upright foot and upright back are welded together, offering enhanced safety and quick installation, as feet do not need to be bolted separately. - Bracing made of angle steel, eliminating the need for tension rod adjustments. This significantly reduces assembly time. - No slotted hole system, so the upright profile remains uncompromised. Price: €2,356.00 net + statutory VAT. You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged by our partner freight forwarder upon request. Freight cost depends on postal code. Assembly: Our trained staff are available to assist with professional assembly and disassembly of your storage systems if required. Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects, from planning and ordering to assembly.

Stanje: novo, Leto izdelave: 2022, 9.56 linear meters wide-span shelving, 80 cm deep Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 9.56 linear meters Shelving package includes: - 06 x frames approx. 200 x 60 cm, disassembled - 40 x beams approx. 185 cm - 20 x shelf panels approx. 184.5 x 79.5 cm - 40 x support bars (approx. 80 cm, galvanized) - incl. safety pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf level, with evenly distributed load - Levels: 4 storage levels - Chipboard panels, natural finish - Uprights blue - New stock, available immediately - Other quantities available! Pre-assembly of the frames can be provided by us for a small additional charge of €6.00 net per piece. Delivery is available on request at attractive rates. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €1,242.00 net plus statutory VAT You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged via our partner carrier upon request. Freight costs depend on postal code. Assembly: Our trained staff are at your disposal for professional assembly and dismantling of your workplace equipment. Our recommendation: Let us know your requirements… We are happy to support you with all aspects of your project, from planning and ordering to final installation. Dcjdpfx Ajzruk Eediok

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 100 h, Funkcionalnost: popolnoma funkcionalen, prosta razpetina: 2.000 mm, skupna dolžina: 1.104.730 mm, skupna širina: 2.000 mm, skupna višina: 8.500 mm, obremenitev na par nosilcev (maks.): 2.100 kg, nosilnost na odsek shranjevanja: 12.000 kg, število vrst polic: 22, višina izdelka (maks.): 2.000 mm, velikost mreže: 50 mm, razmak lukenj: 50 mm, višina police: 8.500 mm, prostor za palete: 12.500 evropske palete, STOW pallet racking – available immediately | Block prices | free delivery per block | assembly possible Immediately available STOW rack blocks from dismantling – consistent configuration, very good condition, fast provision. Block purchase: free delivery, assembly available EU-wide. Highlights: Block A immediately, Block B ~3 weeks "Finished Goods" racking: depth ~2,000 mm, height ~8,500 mm, beams 2,700 / 1,800 mm Accessories in quantity: wire mesh shelves, rear mesh, push-through protection, DSS holders Block pricing instead of single item prices • free delivery on block orders Assembly & acceptance by our own experienced team Condition: very good used industrial condition, dismantled & sorted Technical data: Uprights: STOW PNUPA 12, 8,500 mm (85×65×1.75 mm) Beams: STOW PNB 0488, 80×50 mm, L = 2,700 / 1,800 mm Dcedpfx Ajxpu R Todiok Rack depth: approx. 2,000 mm • Example shelf calculations on request Accessories: wire mesh decks (with depth supports), rear mesh, push-through protection, safety clips, frame connectors, row spacers Available quantities (per block, approx.): 216 frames 8,500×1,000 PNUPA 12 • 216 add. uprights PNUPA 12 2,850 beams 2,700 mm PNB 0488 • 90 beams 1,800 mm PNB 0488 2,950 mesh shelves • 50 running meters rear mesh 8,500 high 605 DSS • 1,210 DSS holders • 1,463 row spacers (1,000 mm) 3,040 safety clips • 228 short frame connectors Services / options: Transport & logistics EU-wide (block orders: free delivery) Assembly incl. anchoring, alignment & acceptance protocol Planning & layout, structural/stability verification, load plates Cleaning/repainting, spare parts Terms: Payment: 30% down payment · 30% upon loading · 40% after delivery completion Prices: excl. VAT • Reservation possible against down payment • while supplies last Condition & inspection: Dismantled & sorted, visual inspection possible (photos/video available). Send us your destination + desired block option (A/B/both) – we will immediately send you a block offer (€/pallet space installed) and reserve a delivery/assembly window.

Stanje: rabljeno, prevoženi kilometri: 35.022 km, moč: 160 kW (217,54 KM), prva registracija: 03/2009, vrsta goriva: dizel, skupna masa: 11.000 kg, konfiguracija osi: 2 osi, barva: zelen, vrsta prenosa: mehanski, emisijski razred: Euro 4, skupna širina: 2.550 mm, skupna višina: 3.975 mm, Oprema: ABS, klimatska naprava, parkirni grelec, pogon na vsa štiri kolesa, Errors and prior sale excepted! Internal number: 1358. 2550592 ----EQUIPMENT * Vehicle type: Truck Dcjdpfxjv N Spqj Adijk * Model / Subtype: 100E 22WS 2t HümS / EuroCargo * Body type: Flatbed with tarpaulin * Make: Iveco * HSN / TSN: 4192 / 28L * Engine capacity: 5,880 cm³ * Power: 160 kW * Engine type / Cylinders / Drive: Diesel / 6 / All-wheel drive * Transmission: Manual, Number of gears: 6 * Seats / Doors: 3 / 2 * Number of axles: 2, single tires * First registration: 09.03.2009 * Color: Solid green ... and much more. ----The vehicle is in unprepared condition! Nationwide delivery available at extra cost. Errors and prior sale excepted. We are happy to accept your vehicle as part exchange. Financing / leasing available with no down payment! Do you have any questions? We are happy to advise you!

Stanje: rabljeno, prevoženi kilometri: 29.986 km, moč: 160 kW (217,54 KM), prva registracija: 03/2009, vrsta goriva: dizel, skupna masa: 11.000 kg, konfiguracija osi: 2 osi, barva: zelen, vrsta prenosa: mehanski, emisijski razred: Euro 4, skupna širina: 2.550 mm, skupna višina: 3.655 mm, dolžina tovornega prostora: 4.200 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 1.200 mm, Oprema: ABS, klimatska naprava, parkirni grelec, pogon na vsa štiri kolesa, Errors and prior sale reserved! Dcedpfx Ajvwiavjdiek Internal number: 1357.2550113 ----EQUIPMENT * Vehicle type: Truck * Model / Subtype: 100E 22WS 2t HümS / EuroCargo * Body type: Flatbed * Manufacturer: Iveco * HSN / TSN: 4192 / 28L * Engine displacement: 5880 cc * Power: 160 kW * Engine type / Cylinders / Drive type: Diesel / 6 / All-wheel drive * Transmission: Manual, Number of gears: 6 * Seats / Doors: 3 / 2 * Number of axles: 2 with single tires * First registration: 09.03.2009 * Color: green, solid ... and much more. ----The vehicle is in unprepared condition! Nationwide delivery available for an additional charge. Errors and prior sale reserved. We are happy to consider your vehicle for trade-in. Financing / leasing possible with no down payment! Do you have questions? We are happy to advise you!

Stanje: rabljeno, prevoženi kilometri: 47.556 km, moč: 160 kW (217,54 KM), prva registracija: 04/2009, vrsta goriva: dizel, skupna masa: 11.000 kg, konfiguracija osi: 2 osi, barva: zelen, vrsta prenosa: mehanski, emisijski razred: Euro 4, skupna širina: 2.550 mm, skupna višina: 3.975 mm, Oprema: ABS, klimatska naprava, parkirni grelec, pogon na vsa štiri kolesa, Errors and prior sale excepted! Internal number: 1356.2550495 ----EQUIPMENT * Vehicle type: Truck * Model/type: 100E 22WS 2t HümS / EuroCargo * Body style: Flatbed with tarpaulin * Manufacturer: Iveco * HSN / TSN: 4192 / 28L * Engine displacement: 5,880 cc * Power: 160 kW * Engine type / cylinders / drive: Diesel / 6 / All-wheel drive * Transmission: Manual, number of gears: 6 * Seats / doors: 3 / 2 * Number of axles: 2, single tires * First registration: 09.03.2009 * Color: solid green ... and much more. ----Vehicle is not prepared! Dcsdpfx Aov Dcypjdijk Nationwide delivery available at an extra charge. Errors and prior sale excepted. We gladly accept your vehicle in trade. Financing / leasing available with no down payment! Have further questions? We will be happy to advise you!

Stanje: pripravljen za uporabo (rabljen), Maho 4022 224 7043 control board with 1351-010-02 touch panel, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Djdpfxsi Ebzps Adiock

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 517 kg, največja dovoljena obremenitev: 2.183 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.560 mm, širina tovornega prostora: 1.840 mm, največja hitrost: 100 km/h, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, SARIS PL 356 184 2700 2 NEW VEHICLE Internal dimensions: 356cm x 184cm Side wall height: 35cm Loading platform height: 65cm Gross weight: 2700kg Payload: 2235kg Braked tandem trailer Overrun brake and handbrake by AL-KO 2x 1350kg axles with brakes Low chassis Fully welded, hot-dip galvanized steel frame Aluminium profile side walls with tension locks All sides foldable and removable 15mm thick, slip-resistant and robust phenolic plywood floor Automatic jockey wheel, support load 400kg 8 noise-dampening lashing rings, 800kg tensile force each Reinforced 13" C-grade tyres with steel valves M+S tyres Net/rope hooks on the frame 13-pin connector Front LED marker lights Rear lamps with reversing light, fog lamp and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026: Dedpfx Aogrwgkodiock - 100km/h equipment (shock absorbers) - Spare wheel with holder - Without side walls (discount) - Side wall height extension to 35cm - Black Edition (powder-coated side walls and rims in black) - Integrated ramps 2800kg - Steel plate on floor - Complete LED lighting - Anti-theft device - Net, fine or coarse mesh - H-frame - Mesh sides in various heights, also closed - Additional side walls 30cm with tension locks - Flat tarpaulin with or without bows - High tarpaulin 160cm - 200cm Further accessories on request! Plus shipping to Gera and vehicle registration document €200 net. Images are for illustration only and may show optional, extra-cost equipment. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open weekdays from 8:00am to 5:00pm for all types of repairs. Axle repair specialist, also for caravan trailers. Large selection of rental trailers. In addition, we offer a wide range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or come by in person.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-23, lastna masa: 541 kg, največja dovoljena obremenitev: 2.159 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.060 mm, širina tovornega prostora: 1.840 mm, višina nakladalnega prostora: 350 mm, vzmetenje: drugo, velikost pnevmatike: 195 / 50 R 13, največja hitrost: 100 km/h, barva: srebrn, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, zavore: drugo, SARIS PL 406 184 2700 2 NEW VEHICLE Internal dimensions: 406 cm x 184 cm Side wall height: 35 cm Loading platform height: 68 cm Gross weight: 2700 kg Payload: 2149 kg Braked tandem trailer Overrun and hand brake by KNOTT 2 x 1350 kg axles with brakes Low chassis Fully welded, hot-dip galvanized steel frame 35 cm aluminium profile side walls with tension locks All sides fold-down and removable 15 mm anti-slip, heavy-duty phenolic plywood floor Automatic jockey wheel with 400 kg static load capacity 8 noise-reducing lashing eyes with 800 kg tensile strength each Reinforced 13" C-type tyres with steel valve M+S tyres Net/rope hooks on the frame 13-pin connector LED marker lights at the front Tail lights with reversing light, fog lamp, and triangular reflectors at the rear OPTIONAL ACCESSORIES WITH PERMANENTLY REDUCED PRICES FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Without side walls (price reduction) - Black Edition (black powder-coated side walls and rims) - Integrated loading ramps 2800 kg - Steel plate on floor panel - Full LED lighting - Anti-theft device - Mesh net, fine or coarse - H-frame - Mesh side extensions in various heights, including closed versions - Side extensions 30 cm with tension lock - Flat tarpaulin with or without bows - High tarpaulin 180 cm or 200 cm - Drop down rear support legs with crank Further accessories available on request! Plus shipping to Gera and vehicle registration document €200 net Images are for illustration purposes only and may show chargeable optional equipment. Dodpfsghpbgjx Adieck Haven't found the right trailer yet? We have 50-100 units in stock, ready for immediate pickup at any time. Our workshop is open weekdays from 8:00 - 17:00 for all types of repairs. Specialists in axle repairs, including caravans. Large selection of rental trailers. Additionally, we have an extensive range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or come by in person.

Stanje: novo, including ramp shaft with ramps / closed loading platform with numerous lashing points / hand winch Technical specifications: • Brand: Martz • Model: GT PLATEAU 450/2 S 2.7T • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: Without first registration Dcedpjx S Rm Sjfx Adijk • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 449 x 211 x 0 cm • External dimensions (LxWxH): 600 x 215 x 89 cm • Permissible total weight: 2,700 kg • Unladen weight: 625 kg • Payload: 2,075 kg • Chassis: High-loader (wheels under the platform) • Tyres: 195/55R10C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Phenolic plywood floor, anti-slip and waterproof • Including hand winch with brake • Ramp storage compartment under the loading platform • 2 x steel loading ramps included • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • 10x lashing eyes integrated in the side frame profile (600daN/kg) • Sideboards can be retrofitted at any time • Reverse automatic brake • KNOTT overrun device and parking brake • Very solid bolted V-drawbar, reinforced • 13-pin plug • Reversing light • Large format safety lighting • Integrated rear fog lamp • Rear frame lighting recessed • Rear left and right LED marker lights • Automatic jockey wheel fitted Optional accessories – please enquire: • 100 km/h approval with shock absorbers • Wheel chocks • Sideboards • Anti-theft device • Spare wheel • Storage box • Reversing light • Lashing straps • and more New vehicle with warranty and TÜV. - Financing or leasing possible - Nationwide delivery available - All prices include VAT - Vehicle registration document can be sent in advance or provisional license plates (Germany) can be provided - Export license plates including customs clearance available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you from stock! We have been specialist dealers & service workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands for over 30 years. - Subject to errors, omissions, and prior sale -

Stanje: novo, lastna masa: 520 kg, največja dovoljena obremenitev: 2.180 kg, skupna masa: 2.700 kg, dolžina tovornega prostora: 4.050 mm, širina tovornega prostora: 2.000 mm, velikost pnevmatike: 185/60R12, Vehicle transporter from manufacturer ANSSEMS, model MSX2700 405x200 BASIC. The Anssems car trailer comes standard with a wooden floor, external lashing eyes on the frame, aluminium loading ramps that slide under the loading platform, a low chassis, sturdy welded steel frame, jockey wheel, and a V-drawbar. Djdpsrxu Uwefx Adijck We also offer accessories for Anssems car transport trailers, such as high tarpaulins, side extensions, wheel chocks, rear support leg sets, toolboxes, car lashing straps, and anti-theft devices.

Stanje: rabljeno, Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool - Die Tool: Forming tool / two-piece press tool - Pressure profile: Ø 70 x 140 mm, 15 mm projection - Side part: detachable - Mounting: Ø 40 mm - Overall dimensions: 250/70/H298 mm Dcsdjhb Uhfepfx Adiok - Weight: 21 kg

Stanje: rabljeno, prevoženi kilometri: 46.199 km, moč: 152 kW (206,66 KM), prva registracija: 03/2024, vrsta goriva: dizel, skupna masa: 7.000 kg, barva: oranžna, vrsta prenosa: samodejen, dolžina tovornega prostora: 4.900 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 2.100 mm, Oprema: ABS, filter saj, klimatska naprava, navigacijski sistem, Iveco Daily 70-210 Hi-Matic Maxi dolga različica + visoka izvedba 4x2 Vzmetenje: vzmetno-zračno Medosna razdalja: 4,10 m Nosilnost: 3833 kg Mere (tovorni prostor) Dolžina: 4,90 m Širina: 1,75 m Višina: 2,10 m Oprema: - Digitalni tahograf - Radio, medijski sistem, navigacija, telefon - Sistem za ohranjanje voznega pasu Dodpfx Adozkcxhoisck - Električna okna - Kamera za vzvratno vožnjo - Tempomat - Priklopna krogla z električnim priključkom Z veseljem vam bomo pomagali tudi pri financiranju/lizingu, in sicer s pomočjo naših partnerjev. Vse navedene informacije so podane brez garancije. Pridržujemo si pravico do spremembe in napak.