Balinirni stroj 200 t z vodoravno vezavo

MACPRESSE EUROPA S.R.L. 112

Technical Data – Baler:
Manufacturer: MACPRESSE EUROPA S.R.L.
Model: 112
Year of manufacture: 2002, partially overhauled in December 2025
Operating hours: 44,590 hours, as of December 2025
Main press force: 200 t
Specific press force: 16.5 kg/cm²
Feed hopper dimensions: 2,000 x 1,020 mm
Filling volume: 2.65 m³
Theoretical throughput: 795 m³/hour
Bale dimensions: 1,100 x 1,100 mm, length variable
Drive power: 2 x 75 kW
Tying: 5-fold horizontal, fully automatic
Throughput for MSW: approx. 48 to 54 t/hour, depending on material
Hydraulic oil tank volume: 3,100 L
Machine weight (baler): approx. 50.8 t

Scope of delivery:
1 unit MACPRESSE baler, type 111A
1 set Operating manual with CE Declaration of Conformity, electrical and hydraulic schematic

Notes:
The machine has been serviced and partially overhauled in our workshop. The following work was performed and parts replaced:

• Hydraulic oil tank drained and cleaned
• Oil and air filters replaced
• Filled with new hydraulic oil
• All hydraulic hoses replaced
• Dismantling of press ram, complete disassembly, mechanical parts freed and serviced
• Front two main running rollers replaced
• Blades on press ram replaced
• Main hydraulic cylinder disassembled and inspected, cylinder tube and piston rod checked, complete seal kit replaced
• Counter blade in frame replaced
• Blade gap set to approx. 3 mm
• Upper steel guide rails in frame (left and right) replaced
• Worn press floor cut out, base plate replaced with wear-resistant HARDOX steel
• Tying and twisting unit dismantled and serviced, all twisting shafts and ball bearings replaced
Lodpfx Aoy S Rruenfshg
• All wire rolls in needle heads replaced
• Wire cutters cleaned and adjusted, chains lubricated and tensioned
• All wire guide rollers serviced
• All door limit switches replaced
• Air separator dismantled, disassembled and serviced
• General maintenance performed

Finally, the baler was subjected to a machine test in manual and automatic mode. See video for machine function test.

The documentation (Operating manual, CE, electrical/hydraulic diagrams) is complete. Inspection by appointment is possible. We assume no liability for the technical information or possible errors.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.