Panožaga

Macmazza Topsaw TS90

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Features and technical data: - Round pot glue unit - with second glue unit for PUR processing - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: two motorized saw units for front/end cap trimming Fodpfx Asyqanbsltsgd - Top/bottom milling: two milling units with copying wheels for radius or chamfer work - Radius scraper: pneumatically controlled, for reworking radii - Surface scraper: for smoothing the edge surfaces - Polishing unit: two buffing wheels with motors for final finishing - Riepe spraying device - Control: PLC with operator panel - Replacement of the feed frequency inverter by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3–12 mm - Power supply 3x 400 V AC, 50 Hz - Nominal power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² power cable) Machine dimensions: approx. 6120x840x1385 mm Machine weight: approx. 3,000 kg Availability: short term Location: Röllbach

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Panel dividing system PA 4115 – 3100 x 3100 DNC-AT Condition: completely overhauled Warranty: 1-year limited warranty Technical specification: Left-angle stop according to AGA 4383 Longitudinal cutting saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (continuously variable via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in machine base and pressure beam - Scoring saw adjustable externally (without opening the safety guard) - Saw unit with regulated DC drive: - Precise positioning (e.g. for cut-outs) - Slowed withdrawal from the cut - Includes safety guard interlock, lamella curtain SZ 5008 Fgedpfjxhg Ibex Altjd - Offcut cutting device SP 5004 – offcuts down to min. 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (separable) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: threshold value of 2 mg/m³ significantly undercut - CE-compliant Angle pressure device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material feed table HP 5021 (rear-mounted to FM 16): - Parallel stop with 6 spring-mounted clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety-limited) - Return speed: 40 m/min - Table length: 3100 mm - Fence depth: 3100 mm Multi-microprocessor control - Integrated PC with hard disk - Operating system: LINUX - Interfaces: serial + parallel, USB - Network connection (including wireless LAN) - Optimize cutting plans in office and send directly to the machine - Multitasking capable - Printing function via USB - Remote maintenance via Internet (Remote Desktop, TeamViewer) - Multilingual dialog programming - 15” flat screen + multifunction keyboard - Swiveling operator console - Graphical display of cutting plans and workflows Additional equipment: Angle stop table HP 5043 (front side): - Machined steel angle, Pertinax table surface - Table size: 1800 × 800 mm Workpiece support table HP 5025 (front side): - Pertinax surface - Table size: 1800 × 800 mm Air cushion device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 circular saw blade KSB 4006 – Ø 200 mm, Z=60 tapered (for scoring saw)

Stanje: novo, Leto izdelave: 2026, CNC avtomatski stroj za vrtanje in vtikanje moznikov za popolnoma avtomatsko vrtanje, lepljenje in vtikanje moznikov. Vrtalno in moznizno obdelovalni center s kompaktnostjo, učinkovitostjo, kakovostjo in prilagodljivostjo. Kratek opis: • Univerzalni CNC upravljani stroj za vrtanje in vtikanje moznikov • Nadzor izstreljevanja lepila preko GIC • Zaprt lepilni sistem Fodedx R Dfepfx Altjgd • Primeren za obdelavo plošč in masivnega lesa • Opcijsko dodatne horizontalne in vertikalne vrtalne vretena • Razi razbremeni CNC obdelovalne centre • Optimalna dopolnitev za stroje za gnezdenje

Stanje: zelo dobro (rabljeno), 2 pre-cutters Glue application unit Guillotine Drip station with 2 saws Straight cutter Corner rounding cutter Fgedpfsulh Nusx Altsd

Stanje: rabljeno, številka stroja/vozila: 008627, Tip nameščene obrobe: tanka obroba, močna obroba, masiven les Sistem lepljenja: EVA, PUR Spojno rezkanje: da Fedpfxjzakdfs Altogd Večnamenska enota: da Maks. podajalna hitrost: 14 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 7 kos.

Stanje: novo, Leto izdelave: 2026, Vrtanje, lepljenje in vstavljanje moznikov v okenske profile za učinkovito in profesionalno izdelavo okenskih spojev z moznično tehniko. Kratek opis: • Univerzalni CNC krmiljeni stroj za vrtanje in vstavljanje moznikov za okenske in vratne elemente • Nadzor brizganja lepila preko GIC • Zaprt sistem za lepilo • Izbirna dodatna horizontalna vrtalna vretena • Razbremeni CNC obdelovalne centre Fsdpodx R A Usfx Altjgd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Ott Atlantic V/12 Edge Banding Machine Pre-milling unit End trimming, 2 x milling, radius scraper, surface scraper Edge thickness: 0.2 - 12 mm Minimum workpiece width: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min Condition: very lightly used Fodpetdz Tqsfx Altjgd Year of manufacture: 2001 Price: 10,000

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), največja višina reza: 115 mm, največja širina rezanja: 4.200 mm, vrsta nastavitve višine: električni, Oprema: CE označba, dokumentacija / priročnik, dozator, vrtilna hitrost brezstopenjsko nastavljiva, zaščitni pokrov žaginega lista, SCHEER PA 7012PK – 4200 x 4200 mm As-new high-performance panel dividing saw with postforming unit, head-cut saws, and vacuum loading AS-NEW – FROM THE MANUFACTURER – 1 Year Warranty For sale is a powerful and extensively equipped SCHEER PA 7012PK panel sizing system with a cutting capacity of 4200 x 4200 mm. The plant has been professionally overhauled and is ideally suited for industrial furniture and interior construction operations demanding high precision, performance, and automation. Technical Data Cutting length: 4,200 mm Cutting height: 115 mm Saw blade projection: 135 mm Main saw motor: 11 kW Scoring saw motor: 2.2 kW Automatic cutting height adjustment Residual cuts down to 5 mm possible Hardened guides Automatic forward and return travel of the saw unit Main and scoring saw with integrated extraction system Fully automatic angle pressure system Material feeder HP 5107-4200 Servo-driven material pusher Feed rate up to 25 m/min Return speed up to 50 m/min 7 liftable clamping fingers Closed Pertinax surface in the fence area Air cushion table instead of rollers Control & Software with integrated industrial PC. Highlights: - SSD hard drive - Linux operating system - Network capable (LAN/WLAN) - Remote maintenance via TeamViewer / Remote Desktop - Graphical cutting plan display - Multilingual user interface - 17" flat screen on a swiveling control panel - Virtually unlimited cutting plan management - Optimization software OPTIMIN The integrated cutting plan optimization allows direct creation and calculation of optimized cutting patterns on the machine. Parts lists can be entered and are automatically converted into efficient cutting diagrams. Postforming Unit - Integrated postforming equipment - Material height up to 80 mm - Lift table TE 5085-4200 - Four-spindle lift table - Feedable from three sides - Table size: 4,200 x 2,200 mm - Stack height up to 650 mm Fjdpfxeza Eazo Altsgd - Motorized roller conveyors, right and left - Fully automatic alignment systems Longitudinal alignment WP 5035-4200 - Automatic positioning - Working area 2,000 – 4,200 mm Lateral alignment WP 5034-4200 - Three aligning fingers - Working area 1,200 – 2,200 mm Front tables - Angle stop table HP 5094-2406 - 3 workpiece support tables HP 5095-2406 - Pertinax supports - LK 5162 air cushion system for all front tables Head-Cut Saws Main head-cut saw KS 5000-4200 - Fully automatic positioning - Adjustment range 300 – 2,100 mm - Extended travel up to 3,100 mm - Power 7.5 kW - Integrated top and bottom extraction Additional head-cut saw - Manually adjustable - Positioning 0 – 50 mm from the stop edge - Power 7.5 kW Vacuum Loading TE 5088-4200 Additional pusher with integrated short-stroke vacuum loading. Panels are automatically transferred from the lift table to the prefeed table and supplied to the machining process. This enables short cycle times and a high degree of automation. Conclusion An extremely rare, fully equipped industrial panel dividing plant with extensive automation, postforming package, dual head-cut system, and vacuum loading. Ideal for the furniture industry, shopfitting, interior finishing, as well as larger carpentry and joinery workshops. Machine available immediately – 1 year warranty.

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 1.300 mm, število vreten: 21, hitro pomikanje X-os: 80 m/min, hitri pomik os Y: 60 m/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 3,200 mm Travel range Y-axis: 1,300 mm Traverse speed X-axis: 80 m/min Traverse speed Y-axis: 60 m/min Traverse speed Z-axis: 25 m/min Number of traverses with vacuum suction: 6 Spindles Number of vertical drilling spindles: 15 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 2 Total number of spindles: 21 Milling unit Number of axes: 3 Max. speed: 24,000 rpm Motor power: 9 kW Tool changer Number of positions: 10 MACHINE DETAILS Total power requirement: 26 kW EQUIPMENT Vacuum pump WINDOWS control system WRT machine programming software Note: Cones and cutters are not included. Safety fences will be supplied subject to availability (right side missing). Fgedpfjytr Ryox Alted The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial descriptive documentation. The buyer has the right to inspect the goods prior to collection and is solely responsible for installation, securing, and operation of the machine at the destination. External reference: 8174

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, številka stroja/vozila: 0-341-07-8150, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 3.800 mm, premer žaginega lista: 380 mm, dolžina rezanja (maks.): 4.300 mm, globina grla: 75 mm, Oprema: dozator, TEHNIČNE PODROBNOSTI Fgodpfx Alsxx Svrstod Iztegnitev rezila: 75 mm Dolžina reza: 4.300 mm Širina reza: 3.800 mm Glavni žagin list, maks. premer: 380 mm Glavni žagin list, moč: 9,2 kW Predrezovalni list, maks. premer: 180 mm Predrezovalni list, moč: 2,2 kW Hitrost pomične mize: do 80 m/min Hitrost vozička žage: 1–120 m/min PODROBNOSTI O STROJU Numerično krmiljenje: POWER CONTROL Programska oprema: Cad Matic 4.0 Električni podatki Napetost: 400 V Tok: 31 A Frekvenca: 50 Hz Tok: 40 A Krmilna napetost: 24 V DC OPREMA Sprednje nalaganje plošč Izmet spredaj Avtomatski stranski izravnalnik Fiksna sprednja miza iz bakelita z zračno zaveso 3 mobilne predmize iz bakelita z zračno zaveso Pomična miza s 6 vpenjali