Mini žerjav

Winlet 350 SOLD

Stanje: novo, Leto izdelave: 2025, Technical data: • Extraction capacity approx. 5,200 m³/h • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction port 250/200 mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters: 28 • Dimensions: 752 x 1,982 x 2,144 mm • Weight: 300 kg • Filter category: G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: • Complies with H-2 standard • Polyester filter, 5 microns Nwedpfxod H Rf Tj Adyeb • 2 containers • Mobile undercarriage • Filter cleaning with a vibration system and control unit + €850 for models equipped with a fire extinguisher (Safe System)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Industrial Band Saw – Power, Precision, and Reliability in Every Cut – HEAVY DUTY MACHINE Equipped with a powerful electric motor of 30, 37, 45, or 55 kW, this band saw delivers outstanding performance, allowing for cutting capacity of up to 35 m³ of logs per 8-hour shift. With a maximum log diameter of Ø1150 mm, it easily handles even the most demanding timber. Key Advantages: • High Precision – Perfectly straight cuts with minimal deviations. • Power and Efficiency – High motor output ensures fast and efficient cutting. • Robust Construction – Built to withstand the toughest working conditions. Nodpowfqqdefx Adyjwb • Easy Operation – Intuitive control system for quick adjustment of all parameters. • Safety Systems – Integrated safety mechanisms for secure operation. Whether you're in the wood industry, a sawmill, or a large-scale workshop, this saw is the ideal solution for high-productivity and precise cutting of large logs. High degree of automatisation with Siemens / Scheider PLC and Wravor FastSmartCut program, always with option with manual control.

Stanje: novo, The manufacturer Zambelli Metalltechnik GmbH & Co. KG will discontinue support for all paternoster and storage lifts as of 31 December 2023. After this date, the company will no longer provide support or spare parts. LTG Lagertechnik Gerschütz GmbH will continue to offer spare parts, modernization kits, and support for these units. Nwodpfx Ajiy Dw Hedysb Please feel free to contact us at any time.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Nedomhhf Sjpfx Adyswb Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Nodpfx Asmhhypedyewb Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Leto izdelave: 2001, Stanje: zelo dobro (rabljeno), številka stroja/vozila: RES J-BO, ABUS HB Overhead Crane System, Crane Runway Approx. 10x5m (5m Bridge) This crane is available multiple times in different lengths. Sample pictures! Load capacity / lifting capacity: 500 kg - 0.5t Technical specifications of the system: Crane runway made from ABUS HB200 rails System delivered complete: HB rails, rail connectors, trolleys, end plates, brackets/hangers etc. Including 500kg Abus chain hoist – lifting height approx. 4m Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2 and KBK3 rails in stock! Other KBK systems with load capacities from 125kg to 1600kg also available. Nedpfx Adju I Uwxoyjwb Please inquire about your desired crane runway with required capacity and dimensions without obligation.

Stanje: novo, KRM ST 30/5, zmogljiv stroj za valjanje iz kategorije okroglih valjavnih strojev in produktne skupine 3-valjnih okroglih valjev, je idealen za okroglo valjanje obdelovancev dolžine do 3000 mm. Ta robusten stroj ima stabilno, zaprto ogrodje in motorizirano nastavljiv zadnji valj, kar omogoča široko uporabo v jeklarstvu in kovinskopredelovalni industriji. Asimetrična postavitev valjev je posebej zasnovana za obdelavo debele pločevine, medtem ko so kaljeni valji iz kakovostnega jekla primerni tudi za nerjaveče jeklo. KRM ST 30/5 nudi tudi ročno in opcijsko motorizirano pomikanje spodnjega valja ter elektromagnetno zavoro za maksimalen nadzor med postopkom upogibanja. Za vprašanja o montaži ali dodatni opremi vam je na voljo naša podpora. Naročite zdaj in odkrijte številne možnosti obdelave pločevine s KNUTH! Nedpfoihvtgex Adyswb

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Nsdpfx Adomhh Dhoyowb Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Leto izdelave: 2007, Stanje: dober (rabljeno), Stroj za sestavljanje poliamida SCHÜCO ISOMAT 5 za aluminijaste profile. Skoraj nov, z orodjem za različne profile. Trenutno razstavljen zaradi transporta. Stroj za lepljenje trakov se lahko uporablja za nanašanje zaščitnega traku na vse profile z dvema vzporednima površinama. Možno je tudi z enim postopkom nanesti trak na tretjo, pravokotno površino. Nwjdpotq E Eiofx Adyjb

Stanje: dober (rabljeno), Leto izdelave: 2012, ASPIRACIJSKA NAPRAVA POLYTECHNIK VACUMOBIL VT 160-L 1950 m3/h, motor 2,2 kW Možna namestitev na delovnem območju (odvisno od vrste prahu) Nizka preostala količina prahu pri vračanju < 0,1 mg/m³ (H3) v skladu s TRGS 553 Zaprt krožni tok zraka, 100 % izraba toplotne energije Velika zbiralna kapaciteta z 1 mobilnim zabojnikom Višina manj kot 2 m (višina sredine sesalne odprtine: 1,5 m) Programabilno upravljanje z avtomatskim zagonom (breznapetostni kontakt) Izpušni ventil ni potreben za prah razreda St1 Nwodpfxsxzt Sts Adyob Filtrirni material certificiran pri IFA (učinkovitost zadrževanja 99,95 %) Nizka poraba energije, visoka sesalna moč Motor IE 3, energetsko varčen Samodejno čiščenje filtrskih rokavov