Stiskalnica za globoko vlečenje

Viersäulenpresse

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, stiskalna sila: 400 t, Clear passage width: 2,500 mm Stroke: 900 mm Total power requirement: 62 kW Machine weight: approx. 27.5 t Dimensions (L x W x H): approx. 3,950 x 2,200 x 4,850 mm Retraction force: 40 t Main cylinders: 2 units Column diameter: 220 mm Installation height: 1,300 mm Table size: 2,500 x 1,600 mm Ram size: 3,100 x 1,600 mm Table height above floor: approx. 900 mm Forward speed: 200 mm/sec Return speed: 200 mm/sec Working speed: 5 - 15 mm/sec Oil tank: 1,500 l Oil quantity: 1,200 l Adjustable pressure control: 50 - 400 t Hsdsin Et Nspfx Ab Eofd Drawing cushion: 1,400 x 800 mm Drawing unit capacity: 30 - 60 t Drawing cushion stroke: 250 mm Drawing cushion speed: 5 - 80 mm/sec Robust machine frame with solid welded construction Low maintenance and reliable Piston rod with induction hardening and chrome coating T-slots as per customer specifications, if not specified: 22 mm according to DIN CE certificate Manufactured according to EU standards Operating manual, technical documentation, and papers in German Machine steel: LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Travel control adjustable via monitor Light sensors front and rear: Sick 1,300 mm Hydraulic components: Bosch Rexroth Monitor: Siemens 12-inch Electrical control cabinet for wall mounting Press interior illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: pump idle power consumption reduced to approx. 2 kW Remote monitoring for remote maintenance Two-hand operation on movable stand Additional Information: Pressure build-up up to 400 t within max. 4 seconds after tool closure Left side of the press closed by door (1,000 x 800 mm) with crossbars Ø 20 mm Right side of the press closed by door (1,000 x 800 mm) with crossbars Ø 20 mm The press can be operated manually, semi-automatically, or fully automatically.

Stanje: rabljeno, vrsta prenosa: drugo, prevoženi kilometri: 1.001 km, voznikova kabina: drugo, Vehicle location: Bovenden, Body: MB, MAN, IVECO, VOLVO, SCANIA, and others. Used rear axles, 50 units in stock! Various used rear axles available from €300 to €1,500 each, depending on condition. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted! Hedpoth T Uqefx Ab Eefd

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, stiskalna sila: 400 t, Hydraulic 400-ton column press suitable for continuous shift operation, with the following basic specifications: a) Closing speed: 100 - 450 mm/sec b) Opening speed: 50 - 250 mm/sec (adjustable via touchscreen) c) Pressing speed: 5 - 60 mm/sec (adjustable via touchscreen) d) Accumulator with approx. 4 nitrogen bottles e) Table size (clamping area): 2700 x 1700 mm (front view, between the columns) f) Total table size: 3400 x 1700 mm g) 28 mm T-slots as per customer specification h) Table, ram, and press head are stress-relieved annealed Hedpfog Iihwsx Ab Esfd i) Column diameter: 250 mm j) Ram size: 3400 x 1700 mm (clamping area 2700 x 1700 mm) k) Overall machine dimensions approx. 3900 x 2200 mm (floor area) x 5700 mm height l) Oil temperature monitoring (adjustable via touchscreen) m) Automatic lubrication (adjustable via touchscreen) n) Free positioning of the ram (adjustable via touchscreen) o) KEYENCE light curtains 14 mm on front and rear sides p) Recirculating oil cooling (adjustable via touchscreen) q) Pressure holding valve 0 to 600 sec. (adjustable via touchscreen) r) Table plate size 3400 x 1700 mm, precision-milled s) Side-monitored doors, 1200 mm high, 1000 mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m away from the press u) Pressure adjustment from 50 to to 400 to (adjustable via touchscreen) v) Stroke limitation selectable by pressure or position w) Programming mode, setup mode, single stroke + continuous stroke (selectable via rotary switch) x) Swiveling operator panel with 15-inch touchscreen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed (SIEMENS S7 1500) aa) Machine body primed and painted bb) Installation, commissioning, and training available at extra cost The hydraulics of the presses we offer are completely assembled using components from BOSCH-REXROTH/Parker/HAWE. Only components (SIEMENS) that are readily available in Germany are used in the control cabinet. All safety equipment, except the light curtains, is supplied by SICK. The control system is supplied by SIEMENS (S7 1500) including the 15-inch touchscreen monitor. The SIEMENS remote maintenance unit SECOME-Ethernet is included in the scope of delivery. SPECIAL FEATURE: Our design, featuring two press cylinders and the accumulator, allows full performance with a main motor of just 90 kW. Please refer to section 1.3 for technical details. Technical Data Design Type of press: Column press Thermally neutral: 80 – 120°C Number of operator sides: 2 Forces Press force max.: 4,000 kN Free opening force max.: 600 kN Pressure build-up time (closed tool, steel on steel): max. 2 sec. Dimensions – intended minimum tool height: 600 mm Max. opening width: 1600 mm Stroke and min. opening: 1000/600 mm Table height above floor: 820 mm Height above floor (overall height): approx. 5700 mm Hall height min.: 7000 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection (at max. closing force with 70% occupancy): ≤ 0.17 mm/m Weight Total weight of the press without operating materials: approx. 52 tons Speeds (see attached cycle diagram) Rapid closing: 100 - 450 mm/s Pressing speed at F max.:

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0362, stiskalna sila: 250 t, Pressure: 250 t Passage width: 1800 mm Hfodpfx Abefxyinj Ejd Stroke: 600 mm Total power requirement: 22 kW Approx. machine weight: 24 t Dimensions (L x W x H): approx. 3390 x 3400 x 3800 mm Column diameter: 160 mm Retraction force: 25 t Max. working height: 800 mm Table size: 1800 x 1600 mm Ram size: 2350 x 1600 mm Table height above floor: approx. 900 mm Hydraulic table movement: 25 mm/sec Max. table load: 5 t Advance speed: 10 mm/sec Pressing speed: 10 mm/sec Return speed: 25 mm/sec Rapid traverse speed: 10 mm/sec Oil tank: 600 l Oil cooling (electrical): 1.5 kW (max) Recommended oil: 46 grade / 10 μm SIEMENS monitor: 10 inch Vibration dampening plates: The machine is mounted on four specially manufactured damper plates, each 450x450x85 mm. Oil tank with oil cooling: The tank holds 1,500 l. The oil is cooled by a dedicated pump, which activates at 30°C. Oil filtration system: Independent of the main and cooling pumps, the press features a filtration circuit. The pump runs continuously but only requires 1.5 kW. Energy-saving function: If the main pump is not required for a preset period, it switches to energy-saving mode and then consumes only about 2 kW/h. The pump is immediately at full capacity again when pressure is required. Safety technology: Optionally, safety PLCs from SICK or Pilz can be selected. The light curtains are from the same manufacturer or from German manufacturer SCHMERSAL. Control cabinet: 40% of the control cabinet space remains available for future installations. All components inside the cabinet are from SIEMENS. Screws: All screws used in the machine are zinc-plated or yellow passivated. Oil drip tray: The hydraulic block and pump are placed in a small oil drip tray to collect any oil during repair or hose change. Noise emissions: According to standards, the press produces a maximum of 67 decibels. Accessories: Roller loading bridges: Two removable loading bridges with rollers, each 1500 mm long, supports equipped with large heavy-duty castors. Parallelism monitoring: Both cylinders are monitored by Balluff position measuring systems and Sick wire-draw encoders. Parallelism monitoring activates at the start of the pressing operation. Monitoring accuracy can be set via the controller. The function is deactivated during idle travel. On each outer side of the ram, a SICK cable-pull encoder measures position. The controller opens or closes the oil flow to the cylinders using specially designed fast valves. Achievable parallelism accuracy across the entire width is better than 1 mm.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, laserska moč: 12.000 W, najv. debelina jeklene pločevine: 80 mm, maks. debelina medeninaste pločevine: 80 mm, dolžina mize: 3.000 mm, širina mize: 1.500 mm, potovalna razdalja osi X: 1.550 mm, pomik osi Y: 3.050 mm, pomik po osi Z: 290 mm, teža obdelovanca (maks.): 1.400 kg, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, skupna dolžina: 9.100 mm, skupna širina: 3.120 mm, skupna višina: 2.200 mm, trajanje garancije: 24 meseci, delovno območje: 3.015 mm, Oprema: centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Brandneue Full-Cover-Faserlaserschneidemaschine | GS-CE/ GS-CE PRO-Serie | 3000–60000 W MACHINE IN STOCK - AVAILABLE This FULLY COVERED FIBER LASER CUTTING MACHINE from the GS-CE series provides maximum safety for metal cutting. Thanks to the full enclosure and the observation window made from protective glass, you can monitor the process and avoid hazards such as laser radiation, sparks, etc. It also features an exchangeable table with rapid changeover—table can be swapped within 10 seconds. It is the ideal solution for safe and efficient metal cutting! Hsdpfxoub Nwdo Ab Eofd Working area sizes: 3000 mm * 1500 mm, 4000 mm * 1500 mm, 6000 mm * 1500 mm, 6000 mm * 2500 mm; Laser power: 6 kW - 80 kW CNC controller: FSCUT Max. acceleration: 4G BOCI cutting head Intelligent anti-collision function Automatic lubrication Schneider relay Laser fault alarm Cooling system fault alarm Laser safety glass Water chiller TÜV CE certificate Optional: automatic loading and unloading system The control unit supports graphic formats: AI, BMP, Dst, Dwg, DXF, DXP External programming System is delivered complete including chiller, extraction unit, and safety light barriers Demo machine - as new condition

Stanje: kot nova (razstavni stroj), Leto izdelave: 2016, stiskalna sila: 160 t, Pressure: 160 t Stroke: 600 mm Total power requirement: 7.5 kW Machine weight approx.: 7 t Return force: 16 t Main cylinder: 1 unit Column diameter: 160 mm Installation height: 800 mm Table surface: 1200 x 800 mm Lateral column distance: 400 mm Hfjdpfxsfxyi Ij Ab Ejd Table height: 850 mm Max. table load: 5 t Advance speed: 1 to 9.8 mm/sec Return speed: 1 to 9.8 mm/sec Oil volume AW 46: 220 l

Stanje: novo, Leto izdelave: 2017, številka stroja/vozila: DF0152, stiskalna sila: 80 t, Pressure: 80 t Stroke: 500 mm Total power requirement: 12 kW Machine weight approx.: 5.1 t Operation: Two-hand control Cylinders: 1 Working height: 800 mm Working area: 800 x 800 mm Table size: 800 x 800 mm Ram plate: 2800 x 1300 mm Table height: 800 mm Approach speed: 9.8 mm/sec Working speed: 9.8 mm/min Return speed: 18 mm/sec Travel path: 700 mm Column diameter: 75 mm Motor for deep drawing function: 10 kW Main motor: WEG 15 kW Pump: REXROTH, Parker electronic axial piston pump, kW rating Blank holder cushion capacity: 25 t (at 280 bar) Blank holder cushion stroke: 200 mm Blank holder cushion rod diameter: 30 mm Blank holder cushion travel speed: 80 mm/sec Hydraulic block: REXROTH/Parker Hydraulic valves: REXROTH/Parker Hydraulic tank: 300 L Hydraulic tank oil requirement: approx. 250 L Hydraulic pressure control: via PLC (minimum pressure 10 t) Hydraulic air cooling: for oil cooling, with electric fan Hydraulic lubrication for guides: manual, via grease nipples or cartridges Electronic components: SIEMENS / MOELLER Control panel: on swivel arm Control: automatic via two-hand operation with key switch, manual via control panel in setup mode Operation: movable two-hand operation USB interface: for data transfer Remote control: Siemens for remote maintenance Spacer sensors: for stroke length adjustment Pressure hold: 0–10 sec. Hedpfx Abofxyh Ho Eefd Oil tank: 150 l Safety light curtains by Schmersal: 800 mm long, front and rear, 300 mm diagonal at the bottom.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Parker Hannifin Instron Hydraulic Power Unit Year of manufacture: 2008 Power: 90 kW Main fuse: 200 A Operating pressure: 285 bar Flow rate: 165 L/min Tank capacity: 850 L Hfedpfx Aoq Nyw Ajb Esd This offer is intended exclusively for commercial customers as defined by § 14 BGB. No sale to private individuals!

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0329, stiskalna sila: 350 t, Pressure: 350 t Clear width: 3000 mm Stroke: 900 mm Total power requirement: 75 kW Machine weight approx.: 60 t Dimensions L x W x H: 2660 x 5400 x 5700 mm Return force: 35 t Table size: 3610 x 1600 mm Ram size: 3610 x 1600 mm Table height above floor approx.: 900 mm Forward speed: 230 mm/sec Hfjdpfxjfxygzs Ab Esd Return speed: 170 mm/sec Oil tank: 2000 l Max. working height: 1700 mm Pressing speed: 21 mm/sec Rapid traverse speed: 200 mm/sec Oil cooling (electric): 3 kW (max) Control: SIEMENS S7 1500 Monitor: WEG 12 inch

Stanje: rabljeno, številka stroja/vozila: 4396, stiskalna sila: 200 t, Pressure: 200 t Frame gap: 1200x1000 mm Stroke: 600 mm Total power requirement: 32.5 kW Machine weight approx.: 20.5 t Return force: 20 t Main cylinder: 1 piece Voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Axial piston pump: Rexroth/Bosch Installation height: 800 mm Working area: 1200x1000 mm Table and ram plate: 1200x1000 mm Working height: 1100 mm Forward speed: 170 mm/sec Return speed: 150 mm/sec Pressing speed: 15 mm/sec Oil capacity: 500 l Socket: 220 V Storage capacity: 200 programs Pressure setting: 20–200 t via monitor Speed adjustable in automatic and semi-automatic mode: 5–170 mm/sec Hfsdpfjfxyh Aox Ab Eod Pressure holding time: 0–10 sec Setup mode speed: 2–10 mm/sec Drawing cushion: 750x950 mm Drawing cushion stroke: 300 mm Drawing cushion force: 5–50 t Drawing cushion speed: 2–80 mm/sec Drawing cushion weight: 1000 kg Scope of delivery includes: - Manuals and operating instructions for the motors, pumps, and the press itself, as well as CE declarations (all provided in duplicate, both printed and on data storage devices) - 1 set of seals and filters

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25.12.15, Fresan FP 100P - C-frame Eccentric Press - 100 Tons (1000kN) Hfjdpfx Abonxh T Re Ejd TECHNICAL DATA: * Capacity: 100 tons (1000kN) * Strokes per minute: 60 (adjustable) * Distance between table and ram: 445 mm * Stroke adjustment: 0 - 132 mm * Ram adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Equipment compliant with CE regulations * Welded steel frame construction * Crankshaft made from alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * Bronze bearings, grade SnBz-12 * Pneumatic clutch-brake combination * Completely enclosed, helical-geared gearbox in oil bath * Press safety valve * Safety PLC & safety switches & light curtains (Pilz) * 6-way ram guidance with used-oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate with AC inverter * Motorized ram adjustment * Mechanical overload protection (Hydraulic protection can be retrofitted to a standard machine) * Pneumatic counterbalance cylinders (ISO, 4 units) * Automatic central lubrication & used-oil collector (thin oil / slideway oil) OPTIONAL EQUIPMENT: * Extra clamping plate * Parts ejector (upper and/or lower; mechanical or pneumatic) * Material feed, loading and unloading systems (decoiler, recoiler, straightener, pneumatic or servo feeder) * Customized machine

Stanje: rabljeno, Leto izdelave: 2001, številka stroja/vozila: H01-3129, stiskalna sila: 200 t, Pressure: 200 t Passage width: 1300x1300 mm Stroke: 1000 mm Total power requirement: 37 / 5.5 kW Approx. machine weight: 29,500 kg Approx. floor space required: 2600x3000x5200 mm Speeds: 450 mm / free fall Speeds: 20 mm/sec Overrun distance: 130 / 60 ms Oil pressure: 283 bar Hfsdpfxefhcc Ns Ab Ejd Oil tank capacity: 2200 L

Stanje: rabljeno, Leto izdelave: 2017, stiskalna sila: 500 t, Pressure: 500 t Clear passage width: 1300 x 800 mm Stroke: 600 mm Approx. machine weight: 18 t Space requirement approx.: 2400 x 2400 x 5500 mm Return force: 50 t Operation: two-hand control Cylinders: 1 unit Motor: 50 kW Oil cooling: electric Column diameter: 200 mm Working height (distance between ram & table plate): 700 mm Table size: 1900 x 800 mm Table height above floor approx.: 1000 mm Ram plate: 1300 x 800 mm Fast approach speed: 150 mm/sec Working speed: 5-10 mm/sec Return speed: 150 mm/sec Oil tank: 1500 l Oil volume: 1400 l Functionality of the control system: The linear scale continuously relays the position of the ram and the ejector to the control unit. The travel distance, the upper limit position and the switching point—where the press should change from rapid traverse to working speed—as well as the end position to be reached can be easily and quickly input via the monitor control panel. The working speed can be set in 1 mm/sec increments from 2 to 15 mm and in 10 mm increments from 15 to 150 mm. Additionally, the machine features pressure monitoring, which can either automatically return the ram upwards upon reaching the desired pressure, or hold the pressure constant (within a 5% tolerance) for a defined period, and then open. Hodpfsd E Irmjx Ab Eofd The control system monitors the secured zones, the entire hydraulics, the pumps, and the temperature. It also synchronizes the main cylinders and compensates in case of unilateral overload. The control unit is housed in an attached control cabinet. The press is operated via an adjustable two-hand control unit, reducing unnecessary steps for the operator. Additional information: Included in the offer are detailed 3D drawings, which must be reviewed and approved by the customer. The columns and cylinders are made from tool steel, induction-hardened and chrome-plated on the outside. The ram guides are manufactured using bronze slide bushings. Scope of supply includes: - Manuals and operating instructions for the motors, pumps, and the press itself, as well as the CE declaration (each in duplicate) - Safety inspection carried out by a qualified company - The machine complies with the EU Machinery Directive 2006/42 (Hydraulic Presses) and DIN EN 693/2011

Stanje: novo, New hydraulic high-speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your requirements. Let us know your needs and we will prepare an attractive offer including installation and service. Over the past years, ISGEC has supplied to more than 26 countries, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and over 200 presses to 40 Japanese customers. We are proud to have been the official sales partner since 2020 and look forward to your enquiry. Hjdef Rt Iropfx Ab Ejfd

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0116 - Rev.00, stiskalna sila: 110 t, Press force: 110 t Clear width: 1300 mm Stroke: 1500 mm Machine weight approx. (without operating fluids): 12 t Dimensions (L x W x H): approx. 2300 x 2090 x 4200 mm Return force: 11 t Max. working height: 1500 mm Ram plate: 1730 x 1100 mm Table plate: 1730 x 1100 mm Table height above floor approx.: 700 mm Column diameter: 140 mm Ram plate thickness: 100 mm Clamping plate thickness: 100 mm Noise level (max.): 67 dB Machine body colour: RAL 7035 Moving parts colour: RAL 2009 Other components colour: RAL 7021 Cladding and balcony colour: RAL 1021 Hfjdpfx Abodxvflo Ejd Motor power: 18 kW Max. approach speed: 300 mm/sec Pressing speed: 15 mm/sec Oil tank: 150 l Control system Siemens: S7 1200