Nosilec sit

Maaikorf

Stanje: novo, Podaljšana roka za koš za košnjo ipd. – prilagojena vsaki stroji! Naši koši za košnjo so seveda sami po sebi popolni, včasih pa imate posebne želje. Na tej strani vam prikazujemo, katere možnosti so na voljo glede obešal, podaljškov, zaščitnih mrež, prostornine košare itd. Standardno na voljo za vsak koš za košnjo: Duodsykgvlopfx Af Sor - Priključki za hitromenjavo CW0, CW01, CW02/3 - Nagibne glave (vidne tudi na fotografiji) 50 ali 90 stopinj, mehanske ali hidravlične - Dodatne rešetke, fiksne ali privijačene, ob strani ali zadaj – vse je mogoče - Wide body izvedbe za vsak želeni koš Dobavljamo tudi podaljške za naše koše za košnjo – nekaj primerov si lahko ogledate na fotografijah zgoraj. Za več informacij nas pokličite ali nam pišite. Stanje: Novo

Stanje: rabljeno, prevoženi kilometri: 14.446 km, dvižna višina: 36.000 mm, Leto izdelave: 2023, obratovalne ure: 788 h, Drive: Wheel Unladen weight: 29,900 kg Lifting capacity: 27,450 kg Serial number: 783801 (64-BZF-4) Front tyre condition: 99% Rear tyre condition: 99% Transport dimensions (L x W x H): 3.9 x 2.55 x 3.9 m Please contact PFEIFER GROUP for further information. Dujdsvbpxyspfx Af Sor

Stanje: rabljeno, Višina: 57 cm Primeren za uporabo z: Bagri Dodsyipcfepfx Af Sjur

Stanje: novo, Leto izdelave: 2023, Košara za košnjo    • Primerna za kolesne in gosenične bagre od 5 ton naprej    • Delovna širina od 2000 do 5500 mm    • Vzmetno obešanje    • Samoostrilni noži Djdpsx I H Tmsfx Af Sjur    • Priključek CW 30    • 90-stopinjsko hidravlično nagibanje    • Ugodne cene, hitra dostava! Stanje: Novo Leto izdelave: 2023

Stanje: novo, največja dovoljena obremenitev: 49.000 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable Loading Platform: - Loading platform, extendable design with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, checker-plate covering above the axles Dusdpfx Afsh Etf Ro Ssr Two-Part Removable Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulic side-shift - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two fixed axles and two steering axles (self-steering), air suspended, with drum brakes, raise/lower function - Self-steering axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tool kit - Tyre size 235/75 R 17.5 Brake System: - Braking system according to EU regulations with EBS-E (4S3M) Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality single-tone topcoat using 2-component (2K) paint in Nova grey Electrical System: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S, and 15-pin sockets Included Accessories: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks with holders on the front wall - Mount at the rear section of the gooseneck for ALU approach ramps - Galvanized folding supports underneath the loading platform chamfer - One holder for warning beacon - Cover plates to bridge the gap between ramps and loading platform - White reflective tape on the side, red on extension and rear, according to EU regulations - Electro-hydraulic power unit - At the gooseneck and ramps (left/right) a holder each for warning signs including socket - Control valves for the ramps mounted on the right side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the gooseneck, plug-in ALU side boards and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, two 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Galvanized, extendable platform wideners approx. 230 mm per side - Lift axle on the front axle with control system - 20 x 20 mm square climbing bars - BEKAMAX central lubrication system - Four warning signs extendable by approx. 400 mm eac

Stanje: rabljeno, Koš za košnjo    • Delovna širina 4000 mm    • Hidravlična nagibna glava    • Herder priključek Dusdpfx Ajx I Dzbof Ssr    • Urejena košara Stanje: Rabljeno

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 6.850 h, moč: 129 kW (175,39 KM), velikost sprednje pnevmatike: 600/70R28, velikost zadnje pnevmatike: 710/70R42, Oprema: zavorni sistem na stisnjen zrak, OPERATING HOURS: 6,800 / AUTOPOWR / IVT - 50 KM/H / COMMANDCENTER DISPLAY AUTO-TRAC READY / JDLink COMPATIBLE / 4600 PROCESSOR / CAB PR.-CV CAB WITH COMMAND ARM STANDARD SEAT / MIRRORS – MANUALLY TELESCOPIC PANORAMA WINDSCREEN WITH POWER DOOR / STANDARD RADIO / HYD Duedou Rvklspfx Af Ser

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs Duedpfxjrgzv No Af Ser * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Leto izdelave: 2023, stanje: novo, Device: Excavator arm Duedpsn Tmy Rofx Af Sjr

Stanje: novo, skupna masa: 4.500 kg, Leto izdelave: 2025, LONG REACH EXCAVATOR ARM 8m, 10m, 12m, 14m, 16m, 18m, 20m, 22m + BUCKET CUSTOM QUOTE AVAILABLE FOR ANY MACHINE. CUSTOM QUOTE AVAILABLE FOR LENGTHS FROM 8M UP TO 22M. OFFER BELOW FOR: LONG REACH BOOM 16M FOR JCB JS 220 + 0.6 M3 BUCKET TECHNICAL SPECIFICATIONS Material: S355 steel Length: 16 m Maximum reach (forward): 15.5 m Maximum digging depth: 11.2 m Weight: approx. 4,500 kg Bucket capacity: 0.6 m3 All pins are hardened (for increased hardness above 50 HRC) 1 bucket cylinder, 6 pipes, 4 hoses, 8 pins, 5 grease lines, 1 set of connectors Paint: KAISAI brand (color selection possible) Hose: GATES brand All pins equipped with grease nipples Duodpfxsua U Acs Af Sor All pipes are phosphated