Tekoče gnojilo AHL/ASL 100.000 litrov

Leto izdelave

2000

Stanje

Rabljeno

Lokacija

Warstein

Prikaži karto

Podatki o stroju

Opis stroja:: Tekoče gnojilo AHL/ASL 100.000 litrov

Leto izdelave:: 2000

Stanje:: rabljeno

Cena in lokacija

Lokacija:: Enkerbruch 2, 59581 Warstein, Deutschland

Klic

Podrobnosti ponudbe

ID ponudbe:: A2990865

Nazadnje posodobljeno:: dne 23.05.2024

Opis

Tank & Environmental Protection Wozniack – Certified Specialist Company under the Water Resources Act (WHG)

Dear Sir or Madam,

We offer a 100,000-litre double-walled storage tank for the storage of liquid fertilizer as described below.

The storage tank is equipped with a brand-new internal plastic liner, specifically designed to be resistant for liquid fertilizer storage. An acoustic leak detection system is installed externally in a lockable protective housing. The storage tank is also double-walled, made entirely of steel.

The plastic liner has a general building authority approval, making it suitable and certified for the storage of liquid fertilizer, such as AHL, and NOx reduction agents like AUS32/AdBlue.

- Nominal capacity: 100 cbm
Dedsc Nk Evepfx Aa Hscr
- Quantity: 1 unit
- Condition: Used but fully overhauled, meaning the tank has been cleaned, refurbished, primed, and painted
- Paintwork: RAL colour as needed; you may also specify your preferred colour
- Material: Steel-in-steel construction, material grade S235JRG2
- Documentation: Manufacturer’s certificate/test certificate as per DIN 6616 D/2 and type plate
- Included:
- 1 dipstick
- 1 vent connection
- 1 fill connection (3” new V2A stainless steel installed)
- 1 new acoustic leak detector for double-wall monitoring
- 1 access ladder
- 1 suction line (3” new V2A stainless steel installed)
- Shape: Cylindrical horizontal tank with feet/consoles

Tank dimensions:
- Length: approx. 15,750 mm
- Diameter: approx. 2,900 mm
- Weight: approx. 16,500 kg
- Above-ground storage

Top offers available: Liquid fertilizer (AHL) tank systems in sizes from 5,000 to 100,000 litres. Water tanks, fire water tanks also available.

Of course, you can also participate in customising your tank system according to your requirements!

All our systems are meticulously inspected and checked by qualified members of our team.

Cost-effective delivery is available upon request.

Site visits to view our equipment are possible at any time. Further above-ground and underground tank systems of all sizes are available for purchase at our premises.

Did we convince you with our offer?
Should you have any questions or requests, please call us – one of our experienced staff members will be pleased to advise you.

Price / Shipping
The price for the tank system is ex-works (Warstein), loaded free of charge. Delivery can be arranged at an additional, low cost. Delivery time: immediate.

You will receive an invoice with VAT shown separately.

In addition, we purchase existing tank systems and, as a certified specialist company under the Water Resources Act (WHG), can professionally empty, clean, dismantle, and remove these systems.

Kind regards from Warstein

Tank- und Umweltschutz Wozniack
Enkerbruch 2
59581 Warstein

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Ponudnik

Registriran od: 2015

36 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+49 2902 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

mali oglas

Lugendorf

258 km

Napenjalna linija
LINCKVM50

Klic

Leto izdelave: 2010, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, The following machines, all in excellent condition, are available for sale – ideal for professional use in wood processing. Saw line consisting of: • Infeed Device ZV21, Model EV 50 • Profiling Chipper ZD31, Model VM50 • Outfeed Device AV31, Model VZM • Centering Device VZ21, Model VZV • Log Rotator DV21, Model DV70-2 • Infeed and Centering Unit EVP • Profiling Chipper VM50 • Profiling Unit VMP450 F61 (4x110kW) • Microtec Measuring System Additionally Available Further used woodworking machinery ?️ Additionally available: Further used woodworking machinery Log Handling Springer • 5-arm design • Log Sorter (5-arm) • Receiving Log Feeder (26 m) Log Rotator LINCK DV35/DV1 (new) • Dimensions: 2.0 m (L) x 2.4 m (W) x 2.5 m (H) • Weight: approx. 1.5 t • State-of-the-art rotation technology for precise positioning 2 Units of Chipper Infeed – Infeed and Centering Unit EV30 • Dimensions: 5.5 m x 2.2 m x 2.1 m • Weight: 8 t each Separating Conveyor Dcodpfxsw Stiuj Aa Hjr • Dimensions: 8.6 m x 2.0 m x 2.6 m • Weight: 7 t 2 Units LINCK Chipper V30 (incl. spare chipper discs) • Dimensions: 5.5 m x 2.3 m • Weight: 11 t each Saw VS 66 – Left & Right Side • Dimensions: 2.8 m x 2.1 m x 2.5 m each • Weight: 3 t each LINCK Pre-centering Unit • Dimensions: 3.0 m x 2.0 m x 1.1 m • Weight: 0.8 t Log handling system with feeder and log conveyor Location & Availability All machines are located in our warehouse at A-3525 Lugendorf Nr. 38 and are available for immediate delivery. Price on request For further information or to arrange a viewing appointment, please feel free to contact me.

Poglej podrobnosti

mali oglas

Tračna žaga - avtomatski - vodoravno BERG & SCHMID K-tech DG 1.202

Nemčija

650 km

Tračna žaga - avtomatski - vodoravno
BERG & SCHMIDK-tech DG 1.202

Klic

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Cutting capacity at 45°: round 680 mm Cutting capacity at 45°: square 600 mm Cutting capacity at 45°: flat 870 x 600 mm Cutting capacity at 60°: round 580/550 mm Cutting capacity at 60°: square 530/450 mm Cutting capacity at 60°: flat 550 x 450 mm Saw blade length 8140 x 54 x 1.6 mm Blade speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Machine weight approx. 5.3 t Space requirements approx. 5.75 x 4.2 x 2.75 m 2-column double mitre band saw designed for high-speed cutting with pusher system P15. Optionally with P30 Dcedpfsfg E Hnjx Aa Hjr Hydraulic lowering of the saw frame • NC controlled • Automatic angle positioning from +60° to -60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved using the new "B&S positioning system". An intelligent NC control system ensures smooth interaction between the linear encoder and the self-braking positioning motor in combination with a reliable hydraulic brake by means of large-radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC control CNC control allows the programming of up to 90 cutting programs with different cut lengths, quantities and mitre angles. Dual-side clamping positioning system The B&S pusher system – feed and positioning system – is equipped with "double-sided opening grippers" which are hydraulically operated. This guarantees safe gripping and transport of materials and bundles that deviate slightly from their ideal shape. The pusher system is independently mounted and guided via ball-bearing linear guides, precision ground rack, and a frequency-driven, robust gear motor.

Poglej podrobnosti

mali oglas

Tračna žaga - avtomatski - vodoravno BERG & SCHMID SBS 550 VA-I / CNC

Nemčija

650 km

Tračna žaga - avtomatski - vodoravno
BERG & SCHMIDSBS 550 VA-I / CNC

Klic

Stanje: novo, Cutting diameter round: 550 mm Cutting diameter square: 550 mm Cutting diameter flat: 550 x 550 mm Saw blade length: 5980 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight approx. 3.8 t Dimensions L x W x H: 3.0 x 2.15 x 2.2 m SPECIAL PRICE!!!! 2-column high-performance band saw machines of the SBS series The SBS series stands out thanks to advanced technology, high quality, durability, and an unrivalled, extensively equipped standard specification. - Modern SNC 20 control system for CNC models - Frequency-controlled saw drive - Operation buttons with pictograms - Work light - Driven chip brush - Hydraulic blade tensioning - Clamping pressure regulation - Double vice (in front of and behind the blade) Dcedpfx Aaefg E Hwe Hsr - Creep mode for positioning - Bundle clamping prepared for electric and hydraulic operation - Chip conveyor The SNC 20 control enables convenient and simple programming of up to 20 different sawing tasks (length and quantity). When entering the nominal dimension, the control system automatically calculates the cutting waste and number of feed strokes. Additionally, the error code display system allows for rapid troubleshooting and diagnostics.

Poglej podrobnosti

mali oglas

Parna turbina Turbine Nadrowski B5 S-5+GVS

Doren

416 km

Parna turbina
Turbine NadrowskiB5 S-5+GVS

Klic

mali oglas

Tračne žage - vodoravno BERG & SCHMID X-tech 900

Nemčija

650 km

Tračne žage - vodoravno
BERG & SCHMIDX-tech 900

Klic

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dcsdpfx Aasfg E Hpo Hjr Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Poglej podrobnosti

mali oglas

Oblikovanje in rezkanje WEINIG Unimat 23 Lamelliermaschine, Nutenbett

Rattelsdorf

527 km

Oblikovanje in rezkanje
WEINIGUnimat 23 Lamelliermaschine, Nutenbett

31.000 €

Stalna cena brez DDV

Klic

Stanje: dober (rabljeno), Four-side planer Weinig Unimat 23 Lamella Machine 9 spindles, grooved bed working width: 230 mm, working height: 170 mm, spindle diameter: 40 mm, feed: 5.5 kW / 6 – 36 m/min, spindle arrangement: 1-bottom (5.5 kW) 2-right (5.5 kW) 3-left (5.5 kW) 4-right (5.5 kW) 5-top (11 kW) Dodpfspq T Rbjx Aa Hocr 6-bottom (5.5 kW) 7-top (7.5 kW) 8-bottom (37 kW) 9-universal (11 kW) 5 powered rollers in the table

Poglej podrobnosti

mali oglas

Tračne žage - vodoravno BERG & SCHMID DGS 350/450 HA-I Easy 34

Nemčija

650 km

Tračne žage - vodoravno
BERG & SCHMIDDGS 350/450 HA-I Easy 34

Klic

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material Djdpfx Aasfgyics Hscr 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Poglej podrobnosti

mali oglas

180.000l rezervoar iz nerjavečega jekla Perfect for granulate and loose products

Wtelno

817 km

180.000l rezervoar iz nerjavečega jekla
Perfect for granulate and loose products

35.000 €

Začetna cena brez prijave DDV

Klic

mali oglas

Naprava za analizo vode Spectro Ciros CCD

Herdwangen

483 km

Naprava za analizo vode
SpectroCiros CCD

Klic

Stanje: dober (rabljeno), Spectro CIROS CCD Water Analysis Device - Height: 105 cm - Width: 150 cm - Depth: 75 cm Djdpfx Aofiqn Uja Hecr Good condition, fully functional. Can be inspected and tested on site. International shipping available. Inspection: Please note that, to avoid any misunderstandings, the item can be viewed and tested under power before purchase. If you have any questions, please ask them prior to purchasing to prevent any uncertainties. For general inquiries or to schedule a viewing appointment, I am always available at the phone number listed below. Errors in description and prior sale excepted. VAT will be shown separately on my invoices. Shipping via freight forwarder.

Poglej podrobnosti

mali oglas

Dinkelsbühl

476 km

Tračna žaga
MEBA405 DG

Klic

Stanje: novo, Leto izdelave: 2025, Patented mitre system Continuously adjustable cutting speed Dodpfx Aeh S Nxpea Hjcr Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Powerful frequency-controlled saw band drive Swivel range 30° right / 45° left Cutting capacity in mm 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° right round 360, flat 420 x 360 30° right round 300, flat 300 x 300 Remnant piece length without bundle clamping 60mm Recommended options: Micro-spray system Laser line Clamping pressure regulator Powered chip brush Manual lifting roller Setup elements

Poglej podrobnosti

Oglašujte tukaj