Steinert elektromagnetni transportni trak

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, obratovalne ure: 28.459 h, številka stroja/vozila: A0220A2141, model krmilnika: Siemens Sinumerik 840 D, laserska moč: 4.000 W, najv. debelina pločevine: 20 mm, delovna dolžina: 3.000 mm, delovna širina: 1.500 mm, Brez minimalne cene - zagotovljena prodaja najvišji ponudbi! TEHNIČNE PODROBNOSTI Delovno območje: 3.000 x 1.500 mm Maks. debelina pločevine (konstrukcijsko jeklo): 20 mm Maks. debelina pločevine (nerjaveče jeklo): 15 mm Maks. debelina pločevine (aluminij): 10 mm Moč laserja: 4 kW PODROBNOSTI O STROJU Krmiljenje: Siemens Sinumerik 840 D Hjdpfx Asyttnajdkeni Tip laserja: TruFlow 4000 Moč laserja: 4 kW Tip: CO2 Mere in teža Mere (D x Š x V): 9.300 mm x 4.600 mm x 2.200 mm Teža: 12.000 kg Obratovalne ure (stanje januar 2026) Obratovalne ure snopa: 28.459 h Obratovalne ure laserja: 51.970 h Opomba: Stroj je trenutno že demontiran.

Stanje: rabljeno, Leto izdelave: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained, ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and reinforced cutting frame. Hnjdpex Nkhqofx Adksi — Features / Scope of Delivery • 1 set of armored shafts HW 8/10 with comb scrapers and re-breaking bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with comb scrapers and re-breaking bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine output: approx. 566 kW (approx. 770 HP) Emission standard: Stage V / Tier 4f (depending on configuration) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: tracked chassis, hydraulically driven Applications: scrap, commercial waste, bulky waste, mixed waste, wood, recyclables — Condition: • Well-maintained machine • Fully operational • Sale as inspected on-site Additional Information / Service History The machine has always had a full maintenance and service contract directly with Lindner. All maintenance and service work has been performed professionally according to manufacturer specifications and documented. Notes: • Sale is without any warranty or guarantee. • No returns or renegotiation. • Subject to prior sale. All details are provided without guarantee. The seller accepts no liability for any errors, incompleteness, or changes to the information provided. The sale is exclusively subject to prior sale.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 800 mm, pomik po osi Z: 400 mm, model krmilnika: Heidenhain TNC 426 PB, največja hitrost vretena: 9.000 obr/min, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Povečan pritisk za prodajo – posebej ugodna ponudba! TEHNIČNI PODATKI Pomiki X-os: 1.200 mm Pomiki Y-os: 800 mm Pomiki Z-os: 400 mm Mizna plošča stroja: 1.280 x 830 mm Število T-utorov: 3x 18 H10 Hitrost vretena: 9.000 min⁻¹ Vretenasti stožec: SK40 Moč vretena: 9 kW Vretenasti navor: 84 Nm Najv. hitrost linearnih osi: do 30 m/min Hodpeypcw Nefx Adkjni Izmenjevalec orodij: 24-kratni PODROBNOSTI O STROJU Krmilnik: Heidenhain TNC 426 PB Priključni podatki: 400 V / 50 Hz Priključna moč: 32 kVA Varovalka: 3x 63 A Teža: 8.500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 850 mm, izvrtina žagine plošče: 10 mm, TECHNICAL DETAILS Saw blade diameter (without loader): 80 – 850 mm Saw blade diameter (with loader): 250 – 450 mm Bore diameter (from): 10 mm Saw blade magazine: up to 40 pieces Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth shapes, including special profiles Grinding Process Sequence 1st step: After start, the vacuum gripper removes the top saw blade from magazine 1. Transfer to the Woodtronic NC4, the cover is opened. 2nd step: Loader returns. The Woodtronic NC4 closes and the grinding program starts. The loader removes the spacer ring from magazine 1 and transfers it to magazine 2. Wait position. 3rd step: After the grinding process and opening of the Woodtronic, the loader removes the ground saw blade and transfers it to magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding operation is complete. Pre-programming possible: The grinding operation runs continuously, even during programming of the next magazine. The Woodtronic NC4 can be pre-programmed during the day and grinds automatically at night. Hedpfx Adoypbx Ejksni Measurable with WALTER Saw Check: Rake angles, Clearance angles, Diameter, Number of teeth Tooth form: manual input required MACHINE DETAILS Operating hours: 4,197 h (according to previous operator, information unverified) EQUIPMENT - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 25 h, Funkcionalnost: popolnoma funkcionalen, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Crusher equipment Including: Special tool, reinforced, 7/7 tool holders each with 4 tools (tools consisting of main blade, pre-crushing blade, and post-crushing blade) Shaft speed individually and steplessly adjustable, approx. 0–41 rpm Including post-crushing beam Including tilting skip Drive unit Drive power 294 kW Including Scania diesel engine, Stage 5 Including standard noise reduction package Including Power RAM pre-cleaner Including central lubrication for the 4 main bearings Including Cleanfix Including swing-type radiator Electrics / Controls Including IFM display Including radio remote control Including 4 shredding programs (wood, waste, special, and green waste) Discharge conveyor Including discharge conveyor Hnodju Hgllepfx Adkei Custom equipment Including pre-armoring of the tools Including overband magnet, hydraulically height-adjustable – neodymium – Including hopper extension on 3 sides, approx. 800 mm each Including electric pump for hydraulic oil Including GPS module Including rubber tracks Including pressure sensors Including additional soundproofing cassette (-10 dB(A)) Refurbishment / Service Refurbishment and service by HAAS

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 8.300 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 6.400 obr/min, Premer palice (maks.): 32 mm, model krmilnika: TX 8 i-p, dolžina obdelovanca (maks.): 245 mm, DÉTAILS TECHNIQUES Broche principale Passage maximum de barre : 32 mm Longueur maximale de pièce (usinage longitudinal) : 245 mm Hnodpfx Adeyn Imyokei Longueur maximale de pièce (usinage court) : 125 mm Vitesse maximale de broche : 6.400 tr/min Contre-broche Passage maximum de barre : 32 mm Profondeur de serrage max. de la pièce : 250 mm Vitesse maximale de broche : 6.000 tr/min Tourelle supérieure Nombre de stations : 10 Toutes motorisées Vitesse maximale : 12.000 tr/min Tourelle inférieure Nombre de stations : 9 Toutes motorisées Vitesse maximale : 12.000 tr/min Unité arrière Nombre de stations : 8 Stations motorisées : 3 (T12, T13 et T14) Vitesse T12 & T14 : 12.000 tr/min Vitesse T13 : 4.000 tr/min DÉTAILS DE LA MACHINE Heures broche : 8.300 heures Commande : TX 8 i-p ÉQUIPEMENT Convoyeur de pièces Convoyeur de copeaux Pompe arrosage 20 bars Filtre à brouillard d'huile IFS Chargeur de barres FMB turbo 3-36

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M11360*17766, Leto izdelave: 2018, nosilnost: 12.000 kg, dvižna višina: 6.500 mm, The technical data are taken from the original order confirmation. The seller cannot guarantee that these correspond to the current condition. TECHNICAL DETAILS Load capacity: 12,000 kg at a load center of 1,200 mm Mast: Duplex standard Lift height: 6,500 mm Lowered height: 4,895 mm Extended height: 8,100 mm Mast tilt: 5° forward / 10° backward MACHINE DETAILS Dimensions (L x W x H): 5,205 × 2,550 × 2,905 mm Wheelbase: 3,500 mm Engine: Volvo TAD-871-VE / 6 cylinders / eco-friendly engine with CAN Bus (EU Stage IV), 185 kW at 2,200 rpm, 1,160 Nm, 7.7 L displacement STEINWEG Stone Stack Grab Type HG1T-6000S TECHNICAL DETAILS Grip width: 0.96–1.00 m Opening range: approx. 0.6–1.3 m Grip height: 1.3 m Load capacity: 6,000 kg Double gripping rails: 1 pair, with cushioned plastic jaws, length 2.3 m Mounting: pendulum EQUIPMENT Manufactured with a robust and precise welded construction Spaced gripping arms with rotatable mounts Includes hydraulic cylinders, necessary valves, hoses, and fittings Includes oil pressure gauge and connecting hoses to the rotator Additionally: a secondary pressure gauge offset by 180° from the standard gauge Load Arm & Extension TECHNICAL DETAILS Extension range: 1.6–2.1 m Load capacity: 8,000 kg at an outreach of 1.6–2.1 m EQUIPMENT 1 forklift load arm, double-tube design, with continuous rotator and pendulum suspension Includes connection hoses to the forklift 1 hydraulic extension with extension cylinder 1 set of stabilizers (2) to compensate for pendulum movement Integrated side-shift in slide guides, shifting distance: 250 mm Wireless Pressure Monitoring (Clamp Pressure) Radio frequency: 868.4 MHz Ambient temperature range: -30°C to +85°C Power supply: Lithium battery 3.6 V Battery life: approx. 1 year at 5-second cycles EMC System / Cabin & Controls EMC System: Electronic control with 7" touchscreen Driver's seat: BeGe 9100 Cabin: OPTIMA – ergonomic, comfort safety cabin High level of noise and vibration damping Hydraulically tiltable to the side ADDITIONAL EQUIPMENT Front mudguards Rear mudguards Exterior rear-view mirrors on the (raised) fenders Turbo II heavy-duty air filter Additional hydraulic function Quick couplings on the fork carriage Pressure accumulator/shock absorber 60 bar / 2 L in the lifting function Hydraulic oil tank pre-heater Additional LED work lights, 2 × on the mast Reversing alarm LED beacon light Electrical cables above the mast Power connection 400 V, 3-phase Blue Spot front and rear EMC 107 Electronic weight indicator (0.1 t) EMC 114 Electronic joystick with rpm boost EMC 122 Speed limiter 20 km/h, switchable to 15 km/h Electric seat heating DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers Intermittent wiper ACC air conditioning SMV universal mounting rail Adjustable A4 writing pad LED reading light Diesel auxiliary heater + engine coolant preheater Sun visor (roof/front) Panorama rear view mirror Installation of attachments from other manufacturers Central lubrication system, basic version, 14 points Hnsdpjym Uu Uefx Adkoi

Stanje: pripravljen za uporabo (rabljen), Goudsmit elektromagnetni transportni trak Dimenzije transportnega traku: A-A = 2700 mm Širina traku: 900 mm Hnedpfsmngv Eex Adkei Pogon: 2,2 kW reduktor Dimenzija bloka: 1700 x 800 x 400 mm Moč: 3 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 12.118 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 762 mm, pomik osi Y: 508 mm, pomik po osi Z: 508 mm, premer vrtljive mize: 500 mm, največja hitrost vretena: 12.000 obr/min, TEHNIČNI PODATKI Pomik X-os: 762 mm Pomik Y-os: 508 mm Pomik Z-os: 508 mm Obremenitev mize: 300 kg Premer rotacijske mize: 500 mm Najv. hitrost vretena: 12.000 min⁻¹ Moč motorja vretena: 22 W Vreteno: BT40 Število mest v zalogi orodij: 40 PODROBNOSTI O STROJU Proizvajalec krmilja: HAAS Dimenzije & Teža Dimenzije (D x Š x V): 4.014 x 3.046 x 3.048 mm Teža: 6.500 kg Delovne ure Hjdpfxoypbhto Adkeni Skupne ure vklopa: 16.142 h Ure obdelave: 12.118 h OPREMA Centralni sistem hlajenja vretena 20 bar Filtracija Tračni transporter za ostružke Merilna sonda za obdelovanec Merilna sonda za orodje Priprava za robota Samodejna (stranska) vrata Prenosni ročni kolešček Pištola za čiščenje Visokohitrostna obdelava

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 3.200 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 189, moč: 310 kW (421,48 KM), kapaciteta rezervoarja za gorivo: 500 l, TECHNICAL DETAILS Cutting roller with teeth: 30 Areas of application: waste / wood / green waste Hsdeym U E Hepfx Adksni MACHINE DETAILS Engine power: 310 kW (405 hp) Fuel tank volume: 500 l Electrical system: 24 V Hydraulic connections: 35–80 l/min Permissible total weight: 27,000 kg Load capacity protection: three-sided Operating hours: 3,200 h EQUIPMENT Overband magnet Shredder roller with 30 teeth Caterpillar engine Load-dependent system Centrally arranged lubrication strips 24 V electronic control with additional electric pump Full remote control Large service doors on the sides Service-friendly engine compartment Hydraulically reversible fan Folding hopper Service steps Acoustic start-up warning Doppstadt telematics system Special shredder system, size L 600/4 – 30 Z Additional hydraulic connections Hydraulic drive Return conveyor belt Frame with overband magnet Magnet and combs

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, skupna masa: 24.000 kg, premer rotorja: 620 mm, število rezil: 30, skupna dolžina: 6.300 mm, skupna višina: 2.430 mm, skupna širina: 4.700 mm, širina rotorja: 2.491 mm, moč: 200 kW (271,92 KM), vrsta vhodnega toka: trifazni, vrtljajska hitrost (min.): 150 obr/min, širina odprtine za polnjenje: 2.495 mm, dolžina polnilne odprtine: 3.190 mm, vhodna napetost: 380 V, Vecoplan VAZ 300/250 UNF Ta stroj je še vedno v uporabi in bo na voljo od 20. oktobra dalje. Hnjdjxlm Trepfx Adkji Za več informacij nas kontaktirajte.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 83 mm, premer struženja: 570 mm, premer nihanja nad prečnim premičnikom: 340 mm, višina središča: 280 mm, največja hitrost vretena: 2.500 obr/min, Stroj je zaradi svoje masivne zasnove primeren za težja stružna in serijska dela! TEHNIČNE PODROBNOSTI Območje vrtljajev: 1 – 2.500 min⁻¹ Navor: 1.300 – 1.600 Nm Premer vrtenja nad posteljo: 570 mm Premer vrtenja nad suportom: 340 mm Višina konice: 280 mm Razdalja med konicama: 2.000 mm Vretenina izvrtina: 83 mm (opcijsko 128 / 165 mm) Število mest v revolverski glavi: 8 Priklop revolverske glave: VDI 40 Premer pinole konjička: 80 mm Notranji stožec konjička: MK5 PODROBNOSTI O STROJU Model krmilnika: WEILER SIEMENS 810D Glavna moč motorja: 20 / 17 kW (60 % / 100 % ED) Dimenzije & Teža Dimenzije (D x Š x V): 3.850 mm × 1.850 mm × 1.750 mm Hnjdpfxjymx N Ns Adkei Teža stroja: 4.200 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 1.850 mm, teža obdelovanca (maks.): 2.700 kg, višina brušenja: 700 mm, premer brusilnega koluta: 450 mm, največja hitrost vretena: 1.450 obr/min, Stroj v masivni industrijski izvedbi z zelo visoko nosilnostjo mize! TEHNIČNE PODROBNOSTI Prečni hod: 2.000 mm Prečni pomik: 750 mm Hodpfx Adsymxyboksni Dolžina vzdolžnega brušenja: 1.850 mm Dolžina prečnega brušenja: 830 mm Višina brušenja (navpično): 700 mm Površina mize: 1.700 mm Največja vzdolžna hitrost: 39 m/min Največja prečna hitrost: 4 m/min Največja hitrost prečnega pomika (nastavljiva v korakih): 40 mm/min Največje število obratov brusilnega vretena: 1.450 obr/min Dimenzije brusilnega kamna: 450 × 80 × 203 mm Največja obremenitev mize: 2.700 kg Dimenzije magnetne vpenjalne plošče: 1.700 × 550 mm PODROBNOSTI STROJA Model krmiljenja: ROSA Moč motorja brusilnega kamna: 14,7 kW Moč hidravlične enote: 9,4 kW Teža stroja: 11.200 kg Glasnost: 76 dB(A) OPREMA CNC krmiljene pomične osi

Stanje: novo, WAŁY DEDYKOWANE DO HAMMEL VB 850. DOSTĘPNE RÓWNIEŻ Z GRZEBIENIAMI BOCZNYMI PROTECHNIKA to firma z 21-letnią historią, od początku swojej działalności zajmująca się produkcją części zamiennych oraz kompletnych linii recyklingowych. W ostatnich latach poszerzyliśmy naszą ofertę o produkcję wałów rozdrabniających do wolnoobrotowych rozdrabniaczy. Dzięki wdrożeniu automatycznych procesów spawalniczych oraz własnej technologii produkcji, zminimalizowaliśmy czas realizacji zamówień, przy jednoczesnym zachowaniu powtarzalnej, wysokiej jakości. Wały rozdrabniające są produktem seryjnym, co umożliwia nam także współpracę z producentami maszyn na zasadzie OEM. Czym PROTECHNIKA wyróżnia się na tle konkurencji? To proste! Hnjdpox Hhfzjfx Adkei - Certyfikowane materiały 3.1 - Jakość TUV SÜD Rheinland - ISO 9001 - Zautomatyzowany proces spawania / ISO 15613 / ISO 15614 - Kwalifikacje spawalnicze ISO 9606-1 - ISO 9001:2015 - ISO 14001 - Niezależny dział konstrukcyjny, który spełni każde wymagania klienta - Własne CENTRUM BADAWCZO-ROZWOJOWE Relacje z klientami są dla nas najwyższą wartością, ponieważ ich satysfakcja to nasz sukces!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 47.512 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.230 mm, pomik osi Y: 1.400 mm, pomik po osi Z: 850 mm, model krmilnika: HEIDENHAIN iTNC 435, največja hitrost vretena: 6.000 obr/min, TEHNIČNE PODROBNOSTI Pomik osi X: 2.230 mm Pomik osi Y: 1.400 mm Pomik osi Z: 850 mm Dimenzije mize: 2.000 mm × 1.250 mm Največja obremenitev mize: 6.000 kg Hitrost vretena: 6.000 min⁻¹ Vpenjalni konus: SK50 Število orodij v menjalniku: 40 Hitri premik v X / Y / Z smeri: 12 m/min PODROBNOSTI O STROJU Model krmiljenja: HEIDENHAIN iTNC 435 Moč vretena: 38 kW Dimenzije in teža Dimenzije (D × Š × V): 6.135 mm × 4.338 mm × 4.150 mm Teža stroja: 22.000 kg Hnsdpfoymxqtjx Adksi Obratovalne ure stroja: 72.846 h Obratovalne ure programa: 48.891 h Obratovalne ure vretena: 47.512 h OPREMA Sistem za hlajenje Notranje hlajenje (IKZ) Elektronsko ročno kolo Merilna tipala Avtomatsko merjenje obdelovanca Izpiranje ostružkov Transporter za ostružke