Profesionalni prenosni tračni žagalnik

Stanje: novo, Leto izdelave: 2025, Centre height: 250 mm Spindle bore: 103 mm Centre distance: 1,000 mm Swing over bed: 500 mm Swing in gap: 710 mm Swing over cross slide: 300 mm Fsdjd I A Dhopfx Aflopb Speed range: 9 - 1,600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral pitch threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,750.00 kg Dimensions: 2,500 x 1,100 x 1,380 mm

Stanje: rabljeno, Double edger TRAK-MET PTF2-4, year 2022, like new, feed rate 0.40 m/min, incl. laser, 15 kW, 2 blades, 1150 kg Prices subject to change without notice. Errors and misprints excepted. Fodpfxovr I H Dj Afljpb

Stanje: novo, Swing over bed: 410 mm Swing over cross slide: 240 mm Turning length: 1,000 mm Swing in the gap: 530 mm Spindle speed: 65 – 1,810 rpm Centre height: 205 mm Spindle bore: 52 mm Tailstock quill taper: MT 4 Total power requirement: 2.2 kW Machine weight approx.: 0.9 t Space required approx.: 1.9 x 0.8 x 1.3 m Fpedpfx Ajm Rlb Njfleb Leadscrew and feed shaft lathe with: • 3-axis digital readout fully installed • Electromagnetic main spindle brake • Automatic feed in longitudinal and transverse direction • Safety relay • Micrometer stop • Coolant device • 3-jaw chuck with 1 set each of hard and soft jaws • German operating manual.

Stanje: dober (rabljeno), MADO Selekta 2 tračna žaga je visokozmogljiv stroj, znan po svoji natančnosti in učinkovitosti. Namenjena je za uporabo v manjših in srednje velikih proizvodnih obratih, mesnicah, delikatesah ali catering podjetjih. Zagotavlja čiste in natančne reze, zato je idealna za rezanje različnih vrst mesa. Vključuje varnostne zaščite in tipke za izredni izklop za varno delo operaterja. Fsdet N Hu Dopfx Aflspb Tehnični podatki: Maksimalna višina izdelka: 340 mm Moč: 1,5 kW Delovna miza: 680 x 680 mm Dimenzije: D: 850 x Š: 800 x V: 1700 mm

Stanje: novo, The Servoturn 500/1000 is a state-of-the-art universal lathe classified among conventional lathes and a member of the servo lathe product group. This machine combines advanced feed technology with proven mechanical engineering, making the transition to servo-conventional lathes both more attractive and economical. Equipped with powerful servo motors and high-quality ball screw drives, the Servoturn allows for precise control of all axes via electronic handwheels and infinitely variable feeds. It also features an intuitively operated interface, where feed rates and thread pitches can be conveniently selected using rotary switches. The robust drive system ensures consistently high surface finish and precision, comparable to CNC lathes. With a swing over bed of 500 mm and a centre distance of 950 mm, the Servoturn 500/1000 is ideal for demanding turning tasks. It is equipped as standard with a quick-change toolpost and a central lubrication system for low-maintenance operation. Purchase the Servoturn 500/1000 now and experience the precision and robustness that KNUTH offers. Fodpfx Ajl Iy Sisfljpb

Stanje: novo, Leto izdelave: 2025, Universal Lathe CORMAK 310 x 900 (TU3109V), VARIO version with stepless spindle speed control. Machining parameters 310 x 900 mm, modern DC motor 1.5kW/230V, equipped with cooling system and digital readout. Recommended for machining hard steels, internal and external surface turning, taper turning, polishing, threading (metric and imperial), drilling, and broaching. Semi-professional model, designed for single-piece and small batch production. Machine version with base. The CORMAK 310 x 900 (TU3109V) 230V universal lathe, thanks to stepless spindle speed adjustment, is an ergonomic machine that meets user requirements. Reduced setup time when working on a wide range of part sizes translates into increased productivity and ease of operation. VARIO version – electronic, stepless spindle speed adjustment via direct current motor and voltage regulator, providing the highest spindle rotational accuracy and improved machining quality of finished parts. Modern DC motor with stepless spindle speed regulation ensures user convenience and shorter setup times. Smooth, efficient drive with excellent speed and torque control characteristics. LCD screen with spindle speed display allows easy monitoring and quick adjustment of spindle speed while setting cutting and threading modes. Two spindle speed ranges: low (80–1000 rpm) for machining hard steels, high (160–2000 rpm) for precision high-speed turning. Easy adjustment of spindle speed and automatic feed from the ergonomic control panel on the gearbox. Bed with induction-hardened, ground guideways. The suitable bed width of 180 mm ensures stable and precise operation. Wide threading range (right- and left-hand threading): metric – (18) 0.2–3.5 mm, imperial – (18) 8–48 TPI. Fpsdpfx Afjric Idelsb Automatic longitudinal feed 0.085–1.832 (9) mm/rev and cross feed 0.010–0.100 (9) mm/rev – reduces machining time and improves quality when turning long workpieces. Spindle bore 38 mm provides optimal working results, allowing the machining of large-diameter shafts. Compound slide with graduation, swivel ±45°, and tailstock with ±10 mm offset for taper turning. Hardened and ground gears in the spindle gearbox. Leadscrew and feed rod for threading and automatic longitudinal and cross feed. Cooling system and 2-axis digital readout included as standard. Machine is fully compliant with EU directives (CE) as well as Polish and DIN regulations and standards.

Stanje: zelo dobro (rabljeno), Technical data: Max. planing width: 400 mm Max. planing height: 240 mm Cutterhead diameter: 120 mm Number of knives: 4 Feed speed: 6-12 m/min Manual height adjustment Extraction port diameter: 110 mm Power supply: 400 V Fpjdpfev Rv Dbox Aflob Motor power: 10 kW Overall dimensions: Length: 2200 mm Width: 860 mm Height: 1250 mm

Stanje: rabljeno, Leto izdelave: 2015, Industrijski robot Fjdpfx Afownt Rlelspb Proizvajalec: Kuka Tip: KR180 R3100 K prime KRC4 2015 Kuka robot KR180 R3100 K prime (konzolni) Leto izdelave: 2015 Doseg: 3.096 mm Teža: 1.059 kg Nosilnost: 180 kg Kuka krmiljenje KRC4 Teža: 150 kg Programska oprema V8.5.4 Vmesnik X11 Vmesnik Beckhoff EtherCat Kuka zaslon na dotik KCP4 Kuka povezovalni kabli 101225ä

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, hitrost vretena (min.): 18.000 obr/min, največja hitrost vretena: 2.800 obr/min, montažni premer: 300 mm, dolžina pomika po osi Y: 1.800 mm, CNC lathe with two stations – Efficiency, precision, and productivity in cylindrical workpiece machining Fsdpfx Afjwhbguslspb The CNC lathe with 2 working units and numerical control is a modern solution for machining cylindrical wooden components—such as columns, table legs, or decorative elements—providing accuracy, repeatability, and efficiency in any workshop or manufacturing environment. Double performance with independent units Equipped with two working units that can operate simultaneously or independently, the lathe enables rapid machining of workpieces up to 1200 mm in length. It is ideal for serial production of furniture components, ecclesiastical elements, or artistic objects. Robust construction for durability The welded bed from rectangular profiles, thermally treated, provides stability and resistance to torsion. Linear guides on the X, Y, and Z axes ensure precise, vibration-free movement. Precision through numerical control Hybrid servomotors, together with the rack-and-pinion system, guarantee exact positioning and efficient control on all axes. The manually adjustable tailstock with four fixing points stabilizes workpieces during complex operations. Advanced motors and cooling Water-cooled motors allow operation at speeds up to 18,000 rpm without overheating, ensuring constant workflow and extended service life. Smart DSP control The DSP control unit with internal memory enables fast file import, project resume from the stopping point, and real-time parameter adjustment—ideal for a continuous and efficient production flow. Auxiliary precision and maintenance systems Self-centering chucks hold workpieces securely, while optical sensors and automatic lubrication systems ensure precision and low maintenance. Key advantages - Perfect repeatability, even for high-volume production - Operational flexibility with independent working units - Robust construction and energy efficiency This CNC lathe is designed to deliver consistent performance, high quality, and adaptability in wood machining, making it the ideal choice for modern workshops or furniture factories aiming to optimize their production processes. Maximum working length: 1200 mm Maximum working diameter (Ø): 300 mm Number of working units: 2 Control: DSP Workpiece rotational speed: 0–2800 rpm Motor power: 4.5 kW Spindle speed: 18,000 rpm Inverter: “BEST” inverter Drive motors: Hybrid servomotors Maximum feed rate: 50 mm/s Accuracy: 0.0125 mm

Stanje: novo, Technical data: Minimum cutting width: 300 mm Maximum cutting width: 400 mm Maximum cutting height with standard blade guide: 350 mm Maximum cutting height with special blade guide: 410 mm Blade length: 2720 mm Motor power: 1.1 kW Advantages: Fsdomiiktopfx Aflopb - Safe and easy to use machines, manually operated by the user. - Designed and built for cutting materials such as solid wood, panels, plywood boards, including those laminated or with edge banding. - Suitable for small-scale work as well as serial production. - The main advantage distinguishing MD Dario band saws from conventional models is the articulated arm with a special joint system, allowing free rotation of the machine in all directions and angles, enabling the user to perform precise cuts. - The saws feature three flywheels covered with rubber, which ensure perfect blade guidance and allow the use of band saw blades of various sizes, depending on the type of cut. The set includes a worktable and tilt adjustment.