Stiskalnica za lepljenje

Leim holz presse L 13000/1600/240

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Holtec paketna kapna žaga Vario Cut z Holtec mehanizacijo. Jörg Elektronik. Popolna odstranitev pod kapno napravo. Kdodpfx Afew Smz Do Tjg

Stanje: rabljeno, Leto izdelave: 2010, Chalet Construction Machine used, good condition, low hours Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 Kjdpfxovwfqqe Af Tedg CE type-tested Up to 140 mm round timber corner joints Saw: 1x Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Sale in "as-is" condition as inspected, without guarantee or warranty

Leto izdelave: 1996, Stanje: rabljeno, Incubator cabinet with control up to approx. 80°C, with internal dimensions of approx. 400 x 500 x 350 mm. Kodpfx Afjbylq Ho Todg

Leto izdelave: 1988, Stanje: potreben popravila (rabljeno), Mehanizacija pred skobeljni stroj za KVH/BSH – za dolžine do približno 13 m. Idealna KVH+BSH linija pred skobeljni stroj. Vzdolžno razstavljanje - enojno sortiranje. 4 krožne žage za prečno razrezovanje, nastavljive po širini. Prečni razrez: 180 x 220 mm, 150 x 300 mm. Zadostuje ena upravljalna oseba. Kdedjvbtpopfx Af Teg

Stanje: pripravljen za uporabo (rabljen), Široka skobeljna stalna miza Največja širina skobljanja: 605 mm Višina skobljanja dvostransko: 200 mm Višina skobljanja štiristransko: 170 mm Skobeljne gredi s 6 noži Za podajalne hitrosti do 24 m/min zadostujejo 3 noži 3 noži delujejo, 3 ostri noži so v rezervi Dodatni agregat: 5. horizontalna delovna gred, 11 kW Izvlečni agregat, širina valja 350 mm Opcija Predoblikovanje na vstopu v stroj Kdedpfx Aewg S Tvsf Teg Stroj se prodaja v stanju: A) kot stoji B) popravljen C) popravljen in z novo elektriko !! Ta skobeljni stroj je pri lastniku v uporabi do februarja 2026 !!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vertical double-sided wood press by C.O.P.E. Brand. Kedpfx Ajudy A Nef Tsdg Two work areas measuring 620x110 cm each.

Stanje: rabljeno, Leto izdelave: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood with automatic identification and removal of wood defects. Technical specifications: Model: OptiCut S75-4 Kdedpfjwtgcxsx Af Tsg Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fusing: 25 A Condition: used

Leto izdelave: 1982, Stanje: rabljeno, V dobrem stanju Kedpjdq Ug Ijfx Af Tsdg

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Kodpfx Afew Sy T Ho Todg Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: novo, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, dvostranski, Line for longitudinal jointing with two milling machines. The press is 6000 mm long. The machine is new and has never been used. All corresponding tools are included with the machine. Kdsdewptnmepfx Af Teg