Kontejner s kavljem

CONTAINER PER INERTI APERTO CON PORTA POSTERIORE T

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Bwedpod Ixadjfx Afnsi Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: dober (rabljeno), Leto izdelave: 1985, Megamat Vertical Carousel Type: 130-225-42 Device No.: 4492 Year of manufacture: 1985 Device height: approx. 5410 mm Device width: approx. 2670 mm Device depth: approx. 1300 mm + 300 mm tabletop Number of trays: 42 Tray width: approx. 2155 mm Tray depth: approx. 410 mm Tray height: approx. 200 mm Bwodovc Hk Nspfx Afnei Compartment load: 100 kg Total load: 4,200 kg Colour: beige/green

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Ficep 1201 DE 601 Excalibur drilling machine for processing flat steel and profiles, featuring a longitudinally moving drilling unit. Bedpfx Afjv Iamzsnewi This machine has been fully cleaned and inspected. The drilling machine is equipped with a numerically controlled, longitudinally moving drilling unit (X-axis), range 0 - 15,000 mm, and an automatic tool changer with HSK A80 holder for 6 tool positions. With its 19 kW drilling spindle drive, this machine is suitable for use with carbide drilling tools. Technical details: Profile and flat steel support with guide rail and fixed table Total length: 15 m Mobile drilling unit for longitudinal positioning on workpieces Horizontal drilling head with one drilling spindle Additional tool storage in X-axis direction Clamping device for securing material Position detection device Max. profile size: 1200 x 1200 mm Number of drilling spindles: 1 pc. Drilling diameter: 5 - 40 mm Thread cutting: M6 - M30 Drilling spindle speed: 180 - 3000 rpm Holder: HSK A 80 Tool changer: 1 x 6 For more information, please contact us.

Stanje: dober (rabljeno), Automatic drawer warehouses are the ideal system for vertical storage of bars and steel profiles with lengths of 3 m, 6 m, and 12 m, as well as heavy accessories, semi-finished products, components, molds, and long materials in general. The load capacity per storage unit ranges from a minimum of 5,000 kg to a maximum of 6,000 kg. Bodpfxovvlntj Afnewi

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta prenosa: samodejen, vrsta goriva: dizel, skupna masa: 5.500 kg, največja dovoljena obremenitev: 2.500 kg, dvižna višina: 6.000 mm, tip droga: teleskopski, Leto izdelave: 2018, obratovalne ure: 3.150 h, Oprema: hidravlika prijemala, kabina, pogon na vsa štiri kolesa, standardna žlica, vilice za palete, JCB 525-60 T4 Telehandler - Good Condition Technical Specifications: Control: Joystick Four-wheel steering (4WS) Engine type: Kohler k.A. 2.5 L Engine power: 75 HP Maximum reach: 2.64 m Lifting height: 6 m Own weight: 5.49 t Bsdpouvc Iyefx Afnswi Travel speed loaded/unloaded: 25 km/h Transport width: 1.84 m Transport height: 1.89 m Maximum lifting capacity: 2,500 kg Operating hours: 3,142 h No leaks at the engine or other components Quick coupler for buckets and forks Attachments: Pallet forks, loader bucket, automatic rear tow hitch.

Leto izdelave: 2025, stanje: novo, ⭐⭐⭐⭐⭐ (5.0) 58 Reviews ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Shipping available: 30-day delivery ✈️ ✅✅✅ Energy Class A+++ ✅✅✅ PLUS VAT & SHIPPING* ►►Buy Now◄◄ ✳️Maintain your liquidity! We offer a range of financing options to ensure your investment has the greatest chance for success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery times❗ ⌛⏰►►► ✨✨ Buy directly from the manufacturer and benefit from better prices and quality! ✨✨ Benefit from 40 years of Proton’s expertise in surface coating technologies. ➖➖➖➖➖ ☘️ Environmentally friendly ☘️⚡️ Green Energy ⚡️☘️ ⭐ Powder Curing Oven with Gas or Diesel Heating - BOXLINE 15-3025 ✔️ Internal dimensions: 1500*3000*2100 mm ✔️ External dimensions: 1780*4000*2500 mm ✔️ Volume: 9 m³ ✔️ Heating capacity: 90,300 Kcal/h ✔️ Circulating air flow (fan): 6,800 [m³/h] ✔️ Circulating fan power: 2.2 [kW/h] ✔️ Digital temperature control, continuously adjustable up to 220°C ✔️ Sandwich panels: Interior 1 mm galvanized steel, Exterior 1 mm powder-coated steel ✔️ Adjustable air outlets and air duct channels for uniform air distribution ✔️ Adjustable curing temperature, curing time, and exhaust fan operation ✔️ Audible signal at the end of curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 140 mm mineral wool. Walls: 140 mm (50 mm rock wool + 100 mm glass fiber) ✔️ Heating method: Indirect heating ✳️Operating Principle✳️ This oven is designed for heating parts coated with powder paint. The coating polymerizes at approx. 200°C (depending on the type of powder used) and forms a film on the metal surface. Temperature control is performed by a control unit, which receives signals from a temperature sensor inside the oven. ✳️Oven Body✳️ Bwodpfx Afsghf R Uonji The body of the polymerization oven consists of thermally insulated panels, vertically interlocked and sealed with heat-resistant compound. Conveyor gaps at the oven door channels can be provided as required. Optional double swing doors are available. ✳️Heat Exchanger✳️ The heat exchanger is installed on the side of the polymerization oven housing. Its internal design and materials allow the chamber temperature to be raised up to 230°C and maintain acceptable temperature differentials at various locations. Heat exchanger made from 3 mm thick AISI310 grade STAINLESS STEEL. ✳️Recirculation Fans✳️ Air circulation inside the oven is accomplished by four recirculation fans with insulated chassis. Wing-type air impellers are commonly used. ✳️Digital Fully Electronic Temperature Controller✳️ ✳️Exhaust Fan✳️ Used for extracting and discharging gases produced during powder polymerization in the oven. If required, the exhaust fan can run continuously after a certain period or be activated automatically at intervals. ⭐Follow us for new campaigns⭐ ☀️ 2 YEARS WARRANTY ☀️

Leto izdelave: 2025, stanje: novo, Vzdrževanju prijazna naprava za odstranjevanje prahu, posebej razvita za agresiven peskalni prah z predkomoro in udarnim ločevalnikom, popolnoma sestavljena iz: a) 1 kos kartušnega suhega filtra, tip PF 1.4.B62.00 5000 m³/h (na voljo tudi druge velikosti) Sestava iz robustnega, vakuumsko tesnega 3 mm jeklenega ohišja, razdeljenega na surovi zračni prostor s filtrirnimi kartušami, filter s predkomoro in udarnim ločevalnikom ter čistim zračnim prostorom s čiščenjem filtrov s stisnjenim zrakom, vsak s posebnimi servisnimi vrati Easy Open. Bwodpjlxyhfefx Afnsi Lijak za zbiranje prahu z režnim ventilom za odstranjevanje prahu z uporabo Big Bag vreč. Magnetni ventil s prikazom diferenčnega tlaka za optimalno nastavitev čiščenja filtrirnih kartuš. Servisna vrata kot nihajna vrata za enostavno vzdrževanje.

Leto izdelave: 2026, stanje: novo, Cene sušilnih peči, prikazanih na fotografijah, se razlikujejo glede na velikost, konfiguracijo in dodatno opremo. 💡📏⚙️ V podjetju ROMER izdelujemo tako standardne modele kot popolnoma prilagojene rešitve, zasnovane glede na vaše tehnološke zahteve. 🏭✅ Bwjdpofz Anpofx Afnsi Sporočite nam dimenzije vaših kosov, kapaciteto linije, profil utrjevanja in razpoložljiv prostor – pripravili bomo najboljšo rešitev in možnosti, ki resnično izboljšajo vsakodnevno učinkovitost. 🔥🎯 🧠📡 Nadziranje in upravljanje Sproten nadzor procesa: temperatura, čas, pretok zraka in načini delovanja – z alarmi in shranjenimi recepti za ponovljive cikle. 🔁✅ 🔥🧩 Grelnim modul Hitro segrevanje in stabilna temperatura zahvaljujoč učinkovitim grelnim elementom in hitremu prenosu energije. ⚡🌡️ 🌀💨 Kroženje zraka Enakomerna porazdelitev zraka zmanjšuje temperaturne razlike za stalno kakovost premaza. 🎯✅ 🧱❄️ Izolacija in konstrukcija Pametna zasnova komore minimalizira toplotne izgube – hitrejše doseganje nastavljene temperature in manjša poraba energije. ♻️📉 🛡️⚠️ Varnost in certifikati Senzorji, medzaporne naprave in zaščitna logika povečajo varnost in zanesljivost delovanja. 🔒👷 ⚡💰 Visoka učinkovitost Optimiziran prenos toplote in manjše izgube pomenijo resnične prihranke pri obratovanju. 📉🔥 ⏰🤖 Samodejni zagon Programabilni urnik – samodejno predgretje pred začetkom izmene za gladek zagon proizvodnje. ⏱️✅ 🚪🔒 Samozapiralna vrata + pametni dimnik Preprečujejo nenamerno odpiranje, dimnik se vklopi le po potrebi za varnejše delovanje. 🧯✅ 🌿🔋 ECO način Nizka poraba energije v stanju pripravljenosti – do 20 % manjša poraba goriva, odvisno od procesa. 🌱📉 👀💡 Pogled in osvetlitev Pregled nad procesom brez odpiranja vrat – manjši padci temperature, lažji nadzor. ✨👁️ 🛤️🔥 Vodila + samodejna kapuca Toplotna kapuca deluje samo med nalaganjem za manjše izgube toplote, samodejno podajanje po tirnicah izboljša ergonomijo in hitrost nalaganja. 🙌⚙️ 🎛️🌡️ VEČCONSKO GRETJE Neodvisen nadzor con za enakomerno utrjevanje kosov z različno maso in obliko. 🧩✅ 🧠♨️ MTS sistem Grelniki nameščeni brez toplotnih mostov – večja učinkovitost in hitrejše dosežene nastavljene temperature. ⚡⏱️ 2-v-1 🧱↔️🧱 Razdeljena komora Premična pregrada za dve neodvisni coni – sušenje in utrjevanje v eni napravi za maksimalno prilagodljivost. 🚀🔁 🎚️🌀 VFD prezračevanje Spremenljiva hitrost ventilatorja glede na pogoje v komori – boljši nadzor in manjša poraba elektrike. ⚙️💡

Stanje: novo, DM100 ZC – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser cutting, shearing, or punching of metal workpieces ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products using a contact roller (approx. 55° Shore hardness) with an abrasive belt, effectively removing heavy burrs in the initial step. The second station features two counter-rotating cross belts with abrasive blocks, which round off the edges of the entire product, both internally and externally, in a second step. A major advantage is the deburring of products with surface protection film, as only the edges are processed without damaging the film. Bedpsd Hintjfx Afnewi Technical specifications – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300

Stanje: dober (rabljeno), Laminating pressure: 220 kN Workpiece diameter: 3mm min; 70mm max Feed pitch: 6mm max Knurling pitch: 2.25mm max Roller width: 160mm max Bodpevyyyxofx Afnewi Roller diameter: 133mm min; 170mm max Roller shaft speed: 24, 30, 38, 45, 62, 72, 90, 114 rpm Roller shaft diameter: 54mm standard; 69.85mm special Center distance between shafts: 135mm min; 230mm max Working stroke: 15mm max Feed rate: from 0.5mm/s up to 6mm/s Laminating time: from 0.1s up to 100s Pause time: from 0.1s up to 100s Main motor: 5.5 kW Power consumption: 8.6 kW Tank capacity: 130 L Approximate weight: 2100 kg