Rezervoar iz nerjavečega jekla Tlačna posoda Rezervoar

10622

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight: approx. 225–320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS: -Control and monitoring unit: Smart Controller (7" touch display) -Heating control via solid-state relay -Control cabinet IP54 -Cooling managed via solenoid valve -Flow measurement using differential pressure principle -Bypass between supply and return with reduced cross-section -Level monitoring via magnetic float switch Cedpfxsg Ey Rfe Afqjhf -Flow monitoring by measuring heating element surface temperature and flow rate -Dirt filter in cooling water supply and in the return of the circulation system -Feed temperature monitoring via electronic safety temperature limiter -External oil filling port -Dilo screw fittings on internal piping connections (except pump connections) -At 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanket with manometer and safety valve 0.5 bar at 350°C (optional) Visit our website for more details or for other performance classes. *The unit complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, dolžina pomika po osi Y: 6.000 mm, Tipper bed for logs up to 6 m long. Available from September 2024. Chodpfx Ajr Iig Defqjf

Leto izdelave: 1997, Stanje: generalkompletno obnovljen (rabljeno), 2 units of spiral casing pumps in process design 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. All seals replaced with new ones. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type (drive side): oil Chedpfxjiuznuj Afqof Lubricant monitoring: oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Discharge cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction port nominal diameter: DN 80 Discharge port nominal diameter: DN 40 Nominal pressure suction: PN 10 Nominal pressure discharge: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Insulation class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process industries - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and conveying - Flue gas desulphurisation plants - Acidic, chloride-containing washing suspensions - Acidic process waters - Wastewater treatment/sewage plants - Offshore and marine engineering

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring Chedpfx Asg Ezarjfqof - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Chjdpforigxyox Afqsf Machine tested, in original condition

Stanje: rabljeno, Hydraulic power unit, hydraulic pump, universal power pack Codpfx Ajf Tdt Ijfqshf - Manufacturer: H+L, hydraulic power unit for hydraulic punch - Type: DK52 1-6-250P-391K - Motor: Junginger 5.5 kW / 1455 rpm - Pressure gauge: up to 250 bar - Accumulator: Hydac 2.5 liters - Hydraulic tank / filter / valves: see images - Dimensions: 540/630/H1210 mm - Weight: 198 kg

Leto izdelave: 2023, obratovalne ure: 11 h, Stanje: kot nova (razstavni stroj), številka stroja/vozila: MA0144_1922, Showroom unit: Codpsh Ey Rcjfx Afqohf Screw Compressor Kaeser SX 8 (10 bar) with SIGMA Control 2 Year of manufacture: 2023 Operating hours: 1 h Technical data: Free air delivery at 7.5 bar: 670 l/min Motor power: 5.5 kW Electrical connection: 400 V / 3 / 50 Hz Dimensions (W x D x H): 590 x 632 x 970 mm Weight: 155 kg Compressed air connection: G 3/4" Sound pressure level: 64 dB(A) Visit our showroom in Erlangen. On over 450 sqm of exhibition space you will find a large selection of used and new compressors.

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Chsdpfx Afoftm Hreqsf Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation.

Stanje: rabljeno, Thickness planer D 510 - Maximum planing width: 51 cm - Maximum planing height: 25 cm - 4-knife cutterhead with Tersa knives - 2 feed rollers in the table plate Chsdpfx Afjq R U Thoqef - 4 feed speeds selectable via switch - Electric brake - Weight: 800 kg, year of manufacture: 2006 - Cutterhead speed: 6000 rpm - Electric table height adjustment - Electronic display for the height of the processed workpiece

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M-900iA/260L R-30iA, nosilnost: 260 kg, doseg roke: 3.100 mm, proizvajalec krmilnikov: Fanuc, model krmilnika: R-30iA, proizvajalec programirnih enot: Fanuc, Oprema: dokumentacija / priročnik, IRS Robotics® obnovljen industrijski robot Vključuje našo garancijo in podrobno 77-točkovno protokolarno preverjanje, ki ga opravijo naši lastni inženirji za robotiko. Znamka: FANUC Tip: M-900iA/260L Krmilnik: R-30iA Nosilnost: 260 kg Doseg: 3,1 m Splošni namen: večja nosilnost, podaljšana roka Masa robota: 1800 kg Chsdpfx Afjp T Umqsqsf Dobavni rok: po dogovoru IRS Robotics® obnovljeno: 77-točkovni protokol – popolnoma preizkušen na naših testnih mizah, novo olje/mast, nove baterije, temeljito očiščen, prebarvan v vašo želeno RAL barvo. Vključuje meritev natančnosti (ponovljivost, točnost, zračnost) O podjetju: Naše vsakodnevno zanesljivo poslovanje je dobava obnovljenih robotov vrhunskih blagovnih znamk: ABB – KUKA – FANUC – YASKAWA. Ustanovljeni 2002. Pošiljamo po vsem svetu.