Vodni toplotni izmenjevalnik

Sanyo SGP-WE170J2 50kw

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition Lrodpfxjrigxye Ahujn

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) Ledjg Ezarspfx Ahuern - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M-900iA/260L R-30iA, nosilnost: 260 kg, doseg roke: 3.100 mm, proizvajalec krmilnikov: Fanuc, model krmilnika: R-30iA, proizvajalec programirnih enot: Fanuc, Oprema: dokumentacija / priročnik, IRS Robotics® obnovljen industrijski robot. 100 % popoln in popolnoma delujoč: robotska roka, krmilnik, vsi kabli in ročna konzola (teach pendant). Vključuje našo garancijo in podrobno oceno po 77-točkovnem protokolu, ki jo opravijo naši notranji strokovnjaki za robotiko. Znamka: FANUC Tip: M-900iA/260L Krmilnik: R-30iA Nosilnost: 260 kg Doseg: 3,1 m Splošni namen: Dvigovanje težjih bremen, dolg doseg Lodpfop T Umqjx Ahujrn Masa robota: 1800 kg Dobavni rok: Po dogovoru IRS Robotics® obnovljeno: 77-točkovni protokol – popolnoma preizkušen na naših preskusnih mizah, novo olje/mast, nove baterije, temeljito očiščen, prebarvan v želeni odtenek po RAL lestvici. Vključuje meritve natančnosti (ponovljivost, natančnost, zračnost). O podjetju: Naše vsakodnevno zanesljivo poslovanje je dobava obnovljenih industrijskih robotov priznanih blagovnih znamk: ABB – KUKA – ABB – YASKAWA. Ustanovljeni leta 2002. Pošiljamo po vsem svetu!

Stanje: novo, Leto izdelave: 2024, ♻ Univerzalna uporaba (les razni, palete vključno z žeblji in sponkami, iverne plošče in ostanki, furnirji, MDF-plošče, kartonaža, plastika …) ✔ Moč: 18,5 kW ✔ Dolžina rotorja: 550 mm ✔ Premer rotorja: 260 mm ✔ Hitrost rotorja: 80-120 rpm ✔ Število nožev: 14 ✔ Granulacija: 10-30 mm ✔ Kapaciteta: do 4 m3/h* ✔ Odprtina za ekstrakcijo: 160 mm Lrjdpfjiq U A Sox Ahusn ✔ Material: Plastika, karton, razne vrste lesa (iverne plošče, MDF plošče, ostanki,...) ✔ Vsipna odprtina: 939 x 567 mm ✔ Dimenzije D/Š/V: 1,88/1,12/1,67 m ✔ Teža: 1250 kg 2 leti garancije ali 2000 delovnih ur

Stanje: novo, Leto izdelave: 2021, A new Nicholson A6/35” 5-arm machine with roll drive is being offered for sale. The machine is still in its original packaging. Assembly and commissioning can be carried out by us. Lrodpfowt T Unex Ahusn

Leto izdelave: 1988, stanje: rabljeno,

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Maximum throughput: 370 kg/h, connected load: 0.25 kW, length: 950 mm, width: 950 mm, height: 1115 mm, weight: 75 kg, including automatic filling, frame structure, level control valve, inspection hatch, and documentation. Lodpfxeh Akm Te Ahusrn

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation. Lredpfx Aeftm Hrshusn

Stanje: rabljeno, Adhesive application Glue application Adhesive application - Glue application specified for package heights up to 300 mm via 1 application roller - Drive via 0.37 kW worm gear motor - 1 pc left Lsdpfxjcht Nye Ahuern - 1 pc right - suitable for DIMTER HK 200 and HK 400 Dimter spare parts Dimter accessories

Stanje: potreben popravila (rabljeno), Leto izdelave: 1993, številka stroja/vozila: 624/9, stiskalna sila: 10 t, delovna višina: 805 mm, skupna dolžina: 1.900 mm, Stiskalnica za klinaste spoje Taktna stiskalnica za klinaste spoje Stiskalnica za spoj z zarezom Pritisna moč: 10 t Širina lesa: 80 - 300 mm Debelina lesa: 18 - 100 mm Lrjdet Sc T Iepfx Ahujn OPTIONALNO s hidravličnim agregatom