Hydr. pressbrake
LVD PPI 55 /20 MNC 95

Leto izdelave

1995

Stanje

Rabljeno

Lokacija

Nemčija

Osnovni podatki

Oznaka stroja:: Hydr. pressbrake

Proizvajalec:: LVD

Model:: PPI 55 /20 MNC 95

Leto izdelave:: 1995

Stanje:: rabljeno

Cena in lokacija

Lokacija:: , Nemčija

Pokliči

Podrobnosti ponudbe

ID oglasa:: A20923317

Referenčna številka:: 2065-AR2051

Posodobitev:: nazadnje dne 23.10.2026

Opis

pressure 55 t
chamfer lenght 2000 mm
distance between columns 1640 mm
height of stroke 325 mm
work feed 15 mm/s
control SOMABEND
total power requirement 12,5 kW
weight of the machine ca. 4,3 t
LVD PPI 55/20 MNC 95 – CNC Press Brake – Year 1995

For sale is a used hydraulic CNC press brake manufactured by LVD, model PPI 55/20 MNC 95.

Technical Specifications:

Manufacturer: LVD, Belgium

Model: PPI 55/20 MNC 95

Year of Manufacture:

Pressing Capacity: 55 tonnes

Bending Length: Approx. 2,000 mm

CNC Control: MNC 95

Power Supply: 380 V / 50 Hz

Connected Load: 12.5 kW

Rated Current: 25 A

Machine Weight: Approx. 4,300 kg

Serial Number: 22162

Condition:

The machine is used and shows signs of wear consistent with its age. It is offered as being in working condition.

However, its full technical functionality and all machine functions have not been comprehensively tested and therefore cannot be guaranteed.

The machine is offered in its existing as-is condition, as inspected and/or shown in the photographs.
Djdpfx Asx Tu Szsfwjcp

Age-related wear, technical defects and potential maintenance or repair requirements cannot be ruled out.

Important Notice:

All technical specifications, equipment details and information regarding the machine's condition are based on the available nameplates, photographs and other information currently available.

All information is provided in good faith but is strictly subject to verification and without any guarantee as to its accuracy, completeness or continued functionality.

The technical specifications and statements regarding operational condition do not constitute a guarantee of condition, performance or fitness for purpose.

Errors, omissions, technical discrepancies and prior sale excepted.

Prospective buyers are strongly advised to inspect and test the machine and independently verify all relevant technical specifications and its operational condition before purchasing.

Inspection by prior appointment is possible.

Ponudnik

Registriran od: 2007

883 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 2333 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Stiskalnica - hidravlična LVD PPI 55 /20 MNC 95/C

Netphen

734 km

Stiskalnica - hidravlična
LVDPPI 55 /20 MNC 95/C

Pokliči

Stanje: rabljeno, Leto izdelave: 1995, Tlak: 55 t Djdpjyk Ikdefx Afwocp Dolžina upogiba: 2000 mm Razdalja med stojali: 1640 mm Višina giba: 325 mm Hitrost giba: 15 mm/s Krmiljenje: SOMABEND Skupna poraba energije: 12,5 kW Teža stroja: pribl. 4,3 t LVD PPI 55/20 MNC 95/C – CNC upogljalni stroj – letnik 1995 Naprodaj je rabljen hidravlični CNC upogljalni stroj proizvajalca LVD, tip PPI 55/20 MNC 95/C. Tehnični podatki: Proizvajalec: LVD, Belgija Model: PPI 55/20 MNC 95/C Letnik: 1995 Sila upogibanja: 55 ton Dolžina upogiba: 2.000 mm CNC-krmiljenje: MNC 95/C Priključna napetost: 380 V / 50 Hz Priključna moč: 12,5 kW Nazivni tok: 25 A Teža stroja: pribl. 4.300 kg Serijska številka: 22161 Stanje: Stroj je v rabljenem stanju, ustrezno starosti, in se ponuja kot funkcionalen. Vendar pa popolna tehnična funkcionalnost in vse funkcije stroja niso bile temeljito preverjene in zato jih ni mogoče zagotoviti. Stroj se ponuja v trenutnem stanju, kot je bil pregledan oz. prikazan na slikah. Starostne sledi, obraba ter možna potreba po vzdrževanju ali popravilu ne morejo biti izključene. Pomembno opozorilo: Vsi tehnični podatki, značilnosti opreme in informacije o stanju stroja temeljijo na razpoložljivih ploščicah s podatki, slikah in informacijah. Vse informacije so podane po najboljših možnih informacijah, vendar izrecno s pridržkom in brez jamstva za njihovo pravilnost, popolnost in trajno funkcionalnost. Tehnični podatki in izjave o funkcionalnosti ne predstavljajo garancije za stanje. Pridržujemo si pravico do sprememb, tehničnih odstopanj in prodaje predhodno. Pred nakupom je priporočljivo opraviti pregled in neodvisno preverjanje tehničnih podatkov in funkcij stroja. Pregled je možen po dogovoru.

Poglej podrobnosti

Mali oglas

Velen

867 km

Plazemski rezalnik
JäcklePlasma 110 I

Pokliči

Stanje: novo, Leto izdelave: 2012, Welding current: 20 - 100 A Maximum cutting capacity: 35 mm Open-circuit voltage: 250 V Minimum compressed air connection: 4 bar Connected load: 20 kVA Djdpfx Afjw En E Ejwscp Input voltage: 400 V Weight: 0.7 kg Dimensions (LxWxH): 1.0 x 0.6 x 0.8 m Plasma cutting machine with trolley - incl. 7 m hose package - Spare nozzles

Poglej podrobnosti

Mali oglas

Stiskalnica - hidravlična BAYKAL APH 3110 x 180

Ahaus

879 km

Stiskalnica - hidravlična
BAYKALAPH 3110 x 180

Pokliči

Stanje: rabljeno, Leto izdelave: 1999, Pressure 180 t Bending length 3100 mm Frame gap 2550 mm Throat depth 310 mm Stroke 200 mm Approach speed 80.0 mm/sec Working speed 10.0 mm/sec Return speed 58.0 mm/sec Installation height 385 mm Dodpjxab Erefx Afwscp Table width 240 mm Working height 885 / 1050 mm Oil capacity 180 ltr. Total power requirement 15.0 kW Machine weight approx. 9850 kg Dimensions L-W-H 4200 x 1750 x 2450 mm From a maintenance workshop Well-maintained condition (!!) - in inspected condition - machine video - ?v=o_t9BBMsNNs Equipment: - Simple, conventional electro-hydraulic press brake * with torsion bar for upper beam parallelism - Electric rear stop with ball screw spindles (X axis) * with 4x manually adjustable stop fingers * Fine adjustment via front handwheel, with analog position display - Electro-motorized adjustment of the depth of penetration (Y1+Y2 axis) * with digital position display - Pivotable control panel, mounted on left side - 1x set of upper tooling - 1x rotatable MULTI V universal die block 125x125 mm - 2x front / movable support arms - 1x freely movable two-hand/foot control - Operating manual (PDF)

Poglej podrobnosti

Mali oglas

Stiskalnica - hidravlična FISCHER DAP 5 /1500

Goldenstedt

877 km

Stiskalnica - hidravlična
FISCHERDAP 5 /1500

Pokliči

Stanje: rabljeno, Tlak 50 t Dolžina upogibanja 1500 mm Razmak med stebri 1220 mm Krmiljenje Cybelec DNC 1200 Hitrost zapiranja 95 mm/min Delovna hitrost 1-10 mm/s Delovni hod 156 mm Čas ustavitve 59 ms Pot ustavitve 6 mm Grlo 200 mm Razdalja med mizo in spodnjim batom 301 mm Širina mize 160 mm Višina mize 850 mm os X 550 mm Delovno območje osi R +/- 50 Število osi 3 (Y, X, R) Teža ca. 3600 kg Djdpfx Afera Rrhjwecp Vključno z delovno lučjo Vključno z veliko zgornjih in spodnjih orodij Nova revizija leta 2003 pri proizvajalcu (dokumentacija na voljo) Novo krmiljenje 2003 Cybelec DNC 1200

Poglej podrobnosti

Mali oglas

Stiskalnica - hidravlična TRUMPF TRUMABEND V 130

Ahaus

879 km

Stiskalnica - hidravlična
TRUMPFTRUMABEND V 130

Pokliči

Stanje: rabljeno, Leto izdelave: 1997, Pressure 130 t Bending length 3060 mm Frame gap 2690 mm Throat depth 410 mm Stroke 365 mm Installation height 535 mm Approach speed 200 mm/sec Working speed 1.0 - 10.0 mm/sec Return speed 135 mm/sec Table width 120 mm Table height 1050 mm Tiltable up to +/- 10.0 mm Operating hours approx. 31,800 h Compressed air 5.0 - 7.0 bar Oil capacity 250 l Operating pressure 340 bar Voltage 400 V Total power requirement 23.0 KVA Machine weight approx. 12,950 kg Dimensions (L-W-H) 3660 x 2310 x 2900 mm Machine in well-maintained condition (!!) with only approx. 31,800 operating hours - in inspected condition - machine video - ?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swivel-mounted control panel, front left * 2D graphical programming & product display * tool & program library * USB interface for keyboard and mouse - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis Dcsdpjxacfmofx Afwop - CNC controlled backgauge (X1 + X2 axis) - CNC controlled height adjustment of the backgauge (R1 + R2 axis) - CNC controlled adjustment of the backgauge fingers (Z1 + Z2 axis) - CNC controlled pneumatic die shifting (I axis) - CNC WILA electro-mechanical crowning system - TRUMPF hydraulic upper tool clamping - TRUMPF manual lower tool clamping - 1x movable 2-hand / foot control - Rear safety guard (sliding door) - Side safety guard (swing door) - original operating instructions + spare parts list

Poglej podrobnosti

Mali oglas

Škarje za profilno jeklo Kingsland Multi 70

Nemčija

614 km

Škarje za profilno jeklo
KingslandMulti 70

Pokliči

Stanje: rabljeno, Leto izdelave: 2007, Technical details: Reach: 640 mm Round steel punching: Ø 26 x 20 mm Punching force: 70 t Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.0 x 1.0 x 1.8 m Djdeu Icmhepfx Afwecp Hydraulic Profile Steel Shear Shearing Station: - max. shearing capacity: 300 x 20 mm / 375 x 15 mm - angle cutting max.: 150 x 13 mm - hold-down adjustable in length up to 630 mm Profile Station: For machining round and square profiles, U-profiles, I-beams, and unequal angle bars Angle/Profile Cutting: - angle steel max.: 90° cut = 150 x 15 mm, 45° cut = 80 x 10 mm - U/I section = 130 x 65 mm; T-section = 90 x 12 mm - Profile cutting max.: round steel Ø 45 mm and square steel 45 mm - Four-way reversible blades Punching Station: - punching force: 60 t - reach: 640 mm - table size WxD = 1000 x 600 mm - max. punching: Ø x thickness: Ø 26 x 20 mm and Ø 57 x 9 mm - notching: D x W x D: 10 x 45 x 90 mm - drop-through bore Ø 40 mm - Equipment: stop rail angle aluminum 100 x 80 x 1000 mm Notching Station: - table WxD 430 x 380 mm - notching: material thickness 10 mm; width 45 mm; depth 60 - 90 mm; angle flange 100 x 10 mm Punching: - table 600 x 600 mm - reach 625 mm - max. bore: Ø 57 x 12 mm - stroke 80 mm; strokes per minute: 34; punching pressure 40 t - stop angle 200 x 100 mm L=600 mm Operation via foot pedal For accessories, please inquire.

Poglej podrobnosti

Mali oglas

Hidravlična tekočinska membranska stiskalnica ITALPRESSE FORMATIC 20.9

Cantù

455 km

Hidravlična tekočinska membranska stiskalnica
ITALPRESSEFORMATIC 20.9

Pokliči

Stanje: dober (rabljeno), Koda: 0136 Znamka: ITALPRESSE Model: FORMATIC 20.9 Hidravlična membranska stiskalnica Obojestransko lepljenje furnirja na panele, ki so na eni strani oblikovani ali profilirani, na drugi pa ravni – za lepljenje vhodov na omarice, čelne stranice predalov, pisalniške in konferenčne plošče, kuhinjske delovne plošče ipd. 3D lepljenje plastičnih folij (PVC, PPE, ABS, transfer folije) na panele, ki so oblikovani ali profilirani na eni strani – za izdelavo vrat omaric, čelnih stranic predalov, pisalniških in jedilnih površin, kuhinjskih pultov, prodajnih pohištvenih elementov, notranjih vrat itd. Dimenzije plošče: 2000 x 900 mm Razmak (daylight): 325 mm Hod cilindra: 325 mm Grelec – električni kotel: 27 kW Tlačna sila: 300 ton Število tlačnih cilindrov: 3 Moč hidravlične enote: 5,5 kW Dsdpspbvqvefx Afwocp Manometer za kontrolo tlaka Avtomatska ponastavitev tlaka Časovnik odpiranja Skupne dimenzije (DxŠxV): 3300 x 1400 x 2400 mm Teža: 8100 kg

Poglej podrobnosti

Mali oglas

Soerendonk

897 km

TISKALNA ZAVORA
Donewell80-2500

4.000 €

Fiksna cena plus DDV

Pokliči

Mali oglas

Stiskalnica - hidravlična DENER DD-M 10030

Unterschleißheim

351 km

Stiskalnica - hidravlična
DENERDD-M 10030

Pokliči

Stanje: rabljeno, Leto izdelave: 2019, Pressure: 100 t Dcsdpfx Aev R Hvnofwop Bending length: 3050 mm Frame gap: 3250 mm Control: Delem DA 66T Y-axis stroke: 300 mm Installation height: 590 mm Approach speed: 75 mm/sec Bending speed: 20 mm/sec Return speed: 75 mm/sec Total power requirement: 11 kW Machine weight: approx. 6.5 t Space requirement: approx. 4.3 x 2.0 x 2.9 m Demonstration unit Y1 / Y2 axes servo-electric Punch clamping: hydraulic (WILA Premium) Die clamping: hydraulic (WILA Premium) incl. motorized crowning Back gauge system: "DENER" X-, R-, Z1-, Z2-axis FIESSLER AKAS LC II M Type 4 (manual) with box bending function Rolleri quick-change segmented tooling: Punch: TPR200.28.R1, Die: TMR100.12.30 over 3,050 mm length

Poglej podrobnosti

Mali oglas

Rödermark

625 km

Plazemski rezalnik
HYPERTHERM

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 1997, številka stroja/vozila: 71-000988, Offer 24820 Technical Specifications: - Cutting current continuously adjustable: 30 – 100 A - Duty cycle: 80 A / 100% duty cycle Dsdpfx Aevqbdyefwocp 100 A / 80% duty cycle - Max. cutting thickness: - Steel: approx. 32 mm - Aluminium: approx. 25 mm - Stainless steel: approx. 55 mm - Air connection: 5 bar - Gas mixing unit - Connection: 400 V / max. 14.5 kVA - Space requirement: approx. W 800 x H 1650 x D 700 mm - Weight: approx. 250 kg

Poglej podrobnosti

Oglašujte tukaj