Hidravlične giljotinske škarje, škarje za pločevino, škarje za pločevino
LVD HST-C 31 / 6

Fiksna cena plus DDV

13.900 €

Stanje

Rabljeno

Lokacija

Hessisch Lichtenau Nemčija

Hidravlične giljotinske škarje, škarje za pločevino, škarje za pločevino LVD HST-C 31 / 6

Podatki o stroju

Oznaka stroja:: Hidravlične giljotinske škarje, škarje za pločevino, škarje za pločevino

Proizvajalec:: LVD

Model:: HST-C 31 / 6

Stanje:: rabljeno

Cena in lokacija

Fiksna cena plus DDV

13.900 €

Lokacija:: 37235 Hessisch Lichtenau

Pokliči

Podrobnosti ponudbe

ID oglasa:: A16287568

Referenčna številka:: 60654

Posodobitev:: nazadnje dne 15.01.2026

Opis

Hydraulic Guillotine Shear LVD Type HST-C 31 / 6
Machine No. 21348 Year of manufacture 1994
Cutting length: 3100 mm
Cutting thickness: 6.35 mm
Back gauge: 770 mm
Working height: 950 mm
Hydraulic sheet hold-downs: 17 units
Hydraulic tank capacity: 150 liters
Motor power: 7.5 kW
Mains connection: 400 Volt, 50 Hz, 9.5 kW, 19 amps
- Motorized back gauge with ELGO digital position indicator
- Back gauge adjustment via push buttons – rapid travel in both directions and fine adjustment only in the negative direction
- Sheet support device under the back gauge with pneumatic lifting cylinder
- Continuously adjustable cutting gap from 0.1 mm, manual handwheel adjustment with analog display
- Cutting angle adjustable in 5 steps from 1.5° to 3.5°, electrically preselectable
Lredotvb Iujpfx Alhsn
- Left side angle gauge, 1500 mm
- 2 table extensions as sheet metal support
- Electric foot switch
- Extensive operating manual
Space requirement without front table extension (L x W x H): 4150 x 1850 x 1900 mm
Space requirement with front table extension (L x W x H): 4150 x 2850 x 1900 mm
Weight: 5.5 tons
Good condition
Excellent cutting results, even with thin sheet metal

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2013

598 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 5602 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Eisenberg (Pfalz)

641 km

Škarje za giljotino
RAS GmbH86.33

Pokliči

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, Used swing beam guillotine shear RAS 86.33 with newly ground upper and lower blades, regularly serviced and barely used. Technical Data: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Back gauge depth: 5-1000 mm Lsdpev Tk Exofx Alhorn Working height: 800 mm Strokes per minute: 30-64 spm Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle gauge: 2,195 mm Machine depth with angle gauge: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame throat: 100 mm Tank capacity: 150 l

Poglej podrobnosti

Mali oglas

TISKALNA ZAVORA AMADA PROMECAM HFP NT 100-3

Essenbach

344 km

TISKALNA ZAVORA
AMADA PROMECAMHFP NT 100-3

59.999 €

VB plus DDV

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 15.996 h, vhodna napetost: 400 V, skupna masa: 6.750 kg, 1000 kN Max. stroke: 200 mm Weight: 6,750 kg Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours With manual angle measurement and correction system With safety laser UVV inspection carried out as scheduled / Maintenance always carried out regularly by Amada Lrsdpfstwliwox Alhsn Accessories: Tool Die: 2 pcs UKB 20.478 V8/12 30° 835 mm 3 pcs UKB 20.344 V4/V7 88° 835 mm Tool Holder: 4 pcs UKB Substructure for Double V Die 20.287 + 60.919 835 mm Press Brakes: 5 pcs UKB 10.261 H100 R0.6/90° 2 pcs UKB 11.158 H80 R0.6/30° 2 pcs UKB 11.200 H66 R0.8/90° Miscellaneous: Light barrier requires repair (new price approx. €4,500) – included separately as a replacement (has already been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to businesses and without any warranty!

Poglej podrobnosti

Mali oglas

Stroj za brušenje površin LEVIBRETON ONE Breton LEVIBRETON ONE

Kiel

968 km

Stroj za brušenje površin LEVIBRETON ONE
BretonLEVIBRETON ONE

21.250 €

VB plus DDV

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.000 mm, moč: 13 kW (17,68 KM), This is a LEVIBRETON ONE surface grinding machine. The machine is equipped with a oscillating head as well as a 750 mm diameter grinding plate. With this machine, the surfaces of both hard stones and soft stones (marble) can be polished, satin-finished, or bush-hammered using the appropriate tooling. Lsdpfx Alorpi E Ajhorn

Poglej podrobnosti

Mali oglas

Wiefelstede

932 km

Hitri radialni vrtalnik
DONAUDR30

4.950 €

Fiksna cena plus DDV

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine Ledpeirax Usfx Alhsrn -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Poglej podrobnosti

Mali oglas

Štiristranska ravnina Reignmac Comewa MB 4-4023

Sidzina

521 km

Štiristranska ravnina
Reignmac ComewaMB 4-4023

Pokliči

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW Lrodpfxjhlp D Ne Alhen The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Poglej podrobnosti

Mali oglas

Mozé-sur-Louet

1.191 km

Stiskalnica
LVDPPBL 200/40

Pokliči

Mali oglas

Kirchen (Sieg)

737 km

Obdelovalni center
HAASEC-1600

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 1.626 mm, pomik osi Y: 1.016 mm, pomik po osi Z: 813 mm, skupna masa: 13.611 kg, dolžina mize: 1.626 mm, širina mize: 914 mm, model krmilnika: HAAS, nazivna (navidezna) moč: 22 kVA, premer vrtljive mize: 760 mm, največja hitrost vretena: 6.000 obr/min, obremenitev mize: 4.536 kg, Oprema: transportni trak za ostružke, Commissioned 03/2006 IKZ 70 bar (TSC 1000) 30-pocket tool magazine (BT50) Full 4th axis Spindle & gearbox replaced new in 2017 Operated in single-shift operation Machine can be inspected under power !!!! Free loading until CW04/2025 !!!! Lrsdpfxsvgmr Ie Alhen (if our new machine is delivered on the same day)

Poglej podrobnosti

Mali oglas

Hidravlična stiskalnica Hans Schoen NHN 250 75 (250 Ton)

Struer

1.232 km

Hidravlična stiskalnica
Hans SchoenNHN 250 75 (250 Ton)

22.000 €

EXW Fiksna cena plus DDV

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, moč: 37 kW (50,31 KM), stiskalna sila: 250 t, hod: 150 mm, širina mize: 900 mm, dolžina mize: 1.000 mm, skupna masa: 16.000 kg, Very nice and well-maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm W: 200 cm L: 200 cm Lrodpfx Alery Trpshsn Weight: 16,000 kg. Can be loaded by crane upon collection and payment. Transport can be arranged. Sold on behalf of customer. Location: DK-7600 Struer. Please schedule an appointment for a viewing.

Poglej podrobnosti

Mali oglas

CNC rezkalni stroj Bridgeport Interact 4

Soerendonk

897 km

CNC rezkalni stroj
BridgeportInteract 4

2.000 €

Fiksna cena plus DDV

Pokliči

Stanje: dober (rabljeno), potovalna razdalja osi X: 745 mm, pomik osi Y: 370 mm, pomik po osi Z: 300 mm, Bridgeport milling machine Model: Interact 4 Control: Heidenhain TNC 155 X travel: 745 mm Y travel: 370 mm Z travel: 300 mm Table: 960 x 380 mm Lrsdpfeqgcdtex Alhon Spindle: ISO 40 Dimensions: 185 x 180 x 235 cm (LxWxH)

Poglej podrobnosti

Mali oglas

Stroj za brušenje zgibne roke MTM GSM 110

Mainbernheim

533 km

Stroj za brušenje zgibne roke
MTMGSM 110

27.460 €

VB plus DDV

Pokliči

Leto izdelave: 2025, stanje: novo, Standard configuration with column Motorized height adjustment 700 mm Articulated arm length 2x 1,100 mm Height adjustment of grinding spindle 130 mm Grinding motor 5.5 kW Including the following options: + Speed control, spindle speed approx. 250 – 1,000 rpm + Pneumatic grinding pressure support + Bellows cover for column and trapezoidal spindle + Incl. foundation bolts and installation template Grinding tools available as options Request more information Lrjdpfx Alegn Tzlehon

Poglej podrobnosti

Oglašujte tukaj