Stroj za oblikovanje zobnikov

LORENZ S7 / 1000

Leto izdelave: 1985, Stanje: dober (rabljeno), številka stroja/vozila: 04.2187, Hydraulic Internal Broaching Machine in Good Working Condition Manufacturer: Arthur Klink Year of Manufacture: 1985, refurbished Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile Force: 10,000 kg at 3 m/min Kjdpfx Afoixntwj Njll Broaching Speeds: hydraulically variable from 1 m/min to 7 m/min Return Speed: hydraulically variable from 7 m/min to 30 m/min Maximum Stroke: 1200 mm Broaching Tool Clamping: universal pull head for flat shanks up to 26 mm width Maximum Workpiece Diameter: Ø max. 480 mm (limited by oil and chip tray) Table Bore: Ø 70 mm Power Supply: 380 Volt / 50 Hz / 5 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1978, potovalna razdalja osi X: 4.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, največja hitrost vretena: 2.066 obr/min, širina mize: 1.000 mm, dolžina mize: 6.100 mm, skupna masa: 19.000 kg, 3-axis Newall digital readout, feed drives with variable speed controller SA 50 head, spindle speeds infinitely variable up to a maximum of 1500 rpm Table: 6100 x 1000 mm Travel: 4500 x 1000 x 1000 mm Klsdpfxjvz Ayds Af Nel Weight: 19 tonnes

Stanje: rabljeno, Leto izdelave: 2008, Obrat nad posteljo 923,8 mm Obrat nad prečno sani 755 mm Maks. premer struženja 356 mm Maks. dolžina struženja 510 mm X/Z pomiki 260/590 mm Vretenasti obrati 5000 obr/min Revolver z 12 postajami Premer vretenaste luknje 73 mm Krmiljenje: MSX-850 III Opremljeno z: Klodpfxsu Sn Hzo Af Nsl Vpenjalna oprema s kleščami Odvajač odrezkov 3 standardni nosilci za orodje Brez portalnega nakladalnika (ni vključen).

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Centre distance: 400–800 mm, spindle speed: 1000–2700 rpm, workpiece diameter: 10–300 mm, grinding wheel diameter: 40–300 mm, swiveling range: -45 to 45°, length: 3000 mm, width: 2500 mm, height: 2275 mm, equipped with Hoffmann oil mist separator (new filter inserts), Faudi gravity band filter system, hydraulic unit, additional grinding head for worm wheel grinding, grinding arbors with diameters 50, 40, 27, 22 mm, holders for SK40 and MK5, driver sets for various clamping diameters, operating manual, circuit diagrams in paper form, inspection is possible. Kljdpergahxsfx Af Njl

Leto izdelave: 1983, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg Klsdpfod Nb A Njx Af Njl General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mounting diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.

Stanje: rabljeno, Leto izdelave: 1952, Technical Details: Swing diameter over bed: 1000 mm Swing diameter over slide: 520 mm Turning length: 2500 mm Slide travel Z-axis, saddle: approx. 500 mm Slide travel Z-axis, top slide: approx. 300 mm Center height: 300 mm Ksdpfxsu Tq U Io Af Nsll Spindle bore: 90 mm Speed range: 3.2 - 382 / 22 steps rpm Feed range X-direction, longitudinal: 0.213 - 2.67 / 36 steps m/min Feed range Y-direction, cross: 0.070 - 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Total power requirement: 22 kW Machine weight approx.: 8.2 t Machine dimensions approx. LxWxH: 5.3 x 1.6 x 1.6 m Transport dimensions approx.: 5.5 x 1.7 x 1.6 m Equipment: Face plate Ø 1000 mm 4-position tool post Steady rest Ø 250 mm, closed Accessories: Four-jaw chuck Ø 630 mm

Stanje: dober (rabljeno), premer struženja nad prečnim suportom: 380 mm, izvrtina vretena: 70 mm, premer struženja: 640 mm, premer struženja nad ležiščem sani: 900 mm, Features: Distance between centers: 2,000 mm Swing over bed: 640 mm Swing over carriage: 380 mm Swing over gap: 900 mm Kjdpfxoudh Slj Af Nell Spindle bore: 70 mm Includes: 400 mm 3-jaw chuck 390 mm 4-jaw independent chuck Steady rest (open) and follow rest (closed) Quick-change tool post with 4 holders.

Stanje: rabljeno, Leto izdelave: 2020, DOOSAN LYNX 2100LYA Klodpfx Aex Id D Aef Njl Leto izdelave: 2020 FANUC upravljalnik na dotik Specifikacije: Maks. hitrost vretena: 6000 obr/min Maks. dolžina struženja: 510 mm Maks. premer palice: 51 mm Maks. premer struženja: 300 mm Os Y: 105 (±52,5) Os C: 360 Glava: BMT45P 24 pozicij - Programabilna konica - Merilna sonda za orodje - Odmetalnik ostružkov LNS - Pogonski držala za orodja 4 kosa (2/2) - Navadni držala 6 kosov Število delovnih ur: 3177 ur

Stanje: novo, Precise, smooth-running standard drill press offering high accuracy and quality. The drill table is adjustable via rack and pinion and can be swivelled around the column. Features full motor protection and star handle. Power supply: 230 V. Continuous drilling capacity in St 60: 15 mm Standard drilling capacity: 18 mm Infinitely variable spindle speeds: 200 - 4,000 rpm Spindle: MT 2 Drilling depth: 80 mm Throat depth: 180 mm Distance spindle/table: up to 380 mm Table surface: 250 x 220 mm Column diameter: 65 mm Overall height: 910 mm Kledpeda Nqxofx Af Nol Weight: 80 kg Three-phase motor with frequency converter: 1.1 kW Features: - Reversing switch for clockwise/counterclockwise rotation, suitable for thread cutting - Full motor protection - Star handle In stock, available immediately.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Wheel diameter - max. 100 mm Wheel width 26 mm Module - max. 3 Module - min. 0.1 Control system Siemens 840 D SL Operating hours 9,598 h Kedpfx Asv Ehbbof Nell Total power requirement 45 kW Machine weight approx. 7 t Space requirement approx. 4x3x2.5 m Gleason 100S Gear Shaping Machine for manufacturing internal and external cylindrical gears and other regularly recurring rollable profiles and shapes on the cylindrical workpiece circumference, as well as for single-piece production of profiles. Technical specifications: Nominal workpiece diameter 100 mm Maximum rotating diameter 150 mm Nominal module of the machine approx. 3 mm (reference value depending on the respective machining task) Stroke spindle speed range 0 - 3,000 rpm Manual stroke position adjustment range 20 mm Maximum gear width 26 mm Minimum rise height of hydrostatic skew guide 400 mm Minimum/maximum distance between tool and workpiece spindle -20/+180 mm Column tilt range (manual) -1/+11° Tool holder (manual clamping) HSK-D63 (Hollow shank taper according to DIN 69063) Machine weight approx. 7,000 kg with robot cell