Vertikalni obdelovalni center

HAAS VF-4

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, proizvajalec krmilnikov: HAAS, model krmilnika: NGC, skupna višina: 2.870 mm, skupna širina: 2.489 mm, obremenitev mize: 794 kg, skupna masa: 5.443 kg, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 22.400 W, teža orodja: 5.400 g, največja dolžina izdelka: 3.734 mm, število osi: 3, Ta 3-osni stroj HAAS VF-4SS je bil izdelan leta 2017. Opremljen je z impresivnimi pomiki 1.270 mm v X-osi, 508 mm v Y-osi in 635 mm v Z-osi. Stroj ima robustno mizo z dimenzijo 1.321 x 457 mm in največjo obremenitvijo mize 794 kg. Če iščete visokokakovostne možnosti obdelave, razmislite o našem vertikalnem obdelovalnem centru HAAS VF-4SS, ki je naprodaj. Za dodatne informacije nas kontaktirajte. Hjdpozc I I Hsfx Afqefh • Dimenzija mize: 1.321 x 457 mm • Pogon vretena: Inline neposredni pogon • Menjalnik orodij: 30+1 bočno nameščen • Maks. premer orodja (poln / sosednji prazni): 64 / 127 mm • Maks. dolžina orodja: 279 mm • Hitri pomiki (X/Y/Z): 35,6 / 35,6 / 35,6 m/min • Rezkalni podajalni pomik: 21,2 m/min • Hladilni sistem: Poplavno hlajenje • Hlajenje vretena skozi orodje (TSC): Da • Prostornina rezervoarja za hladilno sredstvo: 208 l

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, MAHO MH 500W with Heidenhain TNC 320 The machine comes from a training workshop and is in very good condition. The TNC 320 offers intuitive and highly flexible operation and programming according to current standards. Technical Data: - Heidenhain TNC 320 retrofit - Travel axes: X - 500 mm, Y - 380 mm, Z - 350 mm - Spindle taper: SK 40 - Vertical quill stroke: 50 mm - Spindle speed range: 20–3,150 rpm, stepless - Feed rate: 1–3,000 mm/min - Rapid traverse: 5 m/min Hedpfx Afoxw N S Ieqofh - Table load capacity: 250 kg - Total power requirement: 11.3 kW - Machine weight: approx. 2 t - Handheld control unit - Safety enclosure Inspection and test run under power on-site are of course possible. We are also happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH, are a company specializing in: - Service - Maintenance - Overhauling - Automation of DMG machines and other renowned manufacturers. We are your partner! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us throughout the entire process.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, največja hitrost vretena: 12.000 obr/min, število osi: 4, This 4-axis HAAS VF-4SS was manufactured in 2019. It features an X-axis travel of 1270 mm, a Y-axis travel of 508 mm, and a Z-axis travel of 635 mm. The machine is equipped with a spindle speed of 12,000 rpm, a chip conveyor, coolant filtration system, and a 4th axis drive. If you are looking for high-quality machining capabilities, you should consider the HAAS VF-4SS vertical machining center that we are offering for sale. Please contact us for further details. • Spindle nose to table (max): 742 mm • Distance spindle nose to table (min): 107 mm • Through-spindle coolant: Yes • Programmable coolant nozzle: Yes • Rigid tapping: Yes • Visual part programming system: Yes • Ethernet interface: Yes • Remote monitoring: HaasConnect + HaasDrop • Electronic handwheel with touchscreen: Included Hfodpoza A Ensfx Afqoh • Coolant filtration system: Included • 4th axis drive and cabling: Included • Spindle air blast: Included • Coordinate rotation and scaling: Included • Tool presetting arm: Included • Worklight: Included • Standard memory: 1 GB • Machine orientation: Vertical • Installation and basic training: Included • Warranty: 12 months Additional Equipment • Chip conveyor: Screw type • HRT210 rotary table (CNC rotary table) • Servo drive: Sigma 5 • Manual tailstock: 6" • Compatibility noted: VF-4SS

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1087278, SPECIFIKACIJA Velikost mize: 1321 mm x 457 mm Pomik osi X: 1270 mm Pomik osi Y: 508 mm Hfjdpfxszbhn Re Afqjh Pomik osi Z: 635 mm Vreteno: BT40 Hitrosti vretena: 0–12000 obr/min Motor vretena: 22,4 kW Hitro pomikanje: 35,6 m/min Kapaciteta menjalca orodij: 40 + 1 orodij Približna teža: 6033 kg STROJ OPREMLJEN Z: Četrta os HRT 210 Hlajenje skozi vreteno Polž za odvod ostružkov Osvetlitev Zaščite Navodila za uporabo

Stanje: dober (rabljeno), Leto izdelave: 1999, Stroj je v dobrem stanju. X 750 mm Y 400 mm Hfodpfx Ajwx Rafjfqjh Z 500 mm 10.000 vrt/min

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 2.547 h, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, največja hitrost vretena: 10.000 obr/min, število osi: 3, Ta 3-osni stroj HAAS VF-4 je bil izdelan leta 2018. Ima največjo hitrost vretena 10.000 vrt/min in impresivne premike osi: 1270 mm po osi X, 508 mm po osi Y ter 635 mm po osi Z. Stroj ima hlajenje skozi vreteno. Če iščete visokokakovostne možnosti obdelave, razmislite o navpičnem obdelovalnem centru HAAS VF-4, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. • Hlajenje skozi vreteno (CTS) je vključeno Dodatna oprema Hodpfx Afey Txkzjqefh • Držala za orodje in primeži za obdelovance so na voljo posebej (niso vključeni v dobavo; je možen nakup za doplačilo)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, največja hitrost vretena: 8.100 obr/min, moč vretenovega motorja: 22.400 W, število osi: 3, This 3-axis HAAS VF-4 was manufactured in 2017. It features a 1,270 mm X-axis travel, 508 mm Y-axis travel, and 635 mm Z-axis travel. The machine comes with a maximum spindle speed of 8,100 rpm and a robust table size of 1,321 mm x 495 mm, supporting a maximum table load of 794 kg. If you are looking for high-quality machining capabilities, you should consider the HAAS VF-4 vertical machining center we are offering for sale. Contact us for further details. Hfodpfx Asy Sg H Uofqjh • Spindle taper: CT 40 • Maximum torque: 122.0 Nm at 2,000 rpm • Table dimensions: 1,321 x 495 mm • Max. table load: 794 kg • Tool changer: 20-position (umbrella type) • Rapid traverse rate (X/Y/Z): 25.4 m/min • Table to spindle nose (min/max): 107 / 742 mm • T-slots: 5 slots, 16 mm width, 80 mm spacing • Power-on time: 18,673:41:20 • Cycle start time: 3,974:33:16 • Feed cutting time: 2,117:17:34 • Included machine options/features: 15" colour monitor, rigid tapping, USB port Additional equipment: • Programmable coolant nozzle • Auger-type chip conveyor

Stanje: rabljeno, Leto izdelave: 1992, Technical Details: X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Spindle taper: ISO SK 40 Control system: Philips 532 Vertical quill stroke: 80 mm Speed range: 0–600 and 600–4000 rpm, stepless Feed rate: 1 – 3000 mm/min Rapid traverse: 6 m/min Hfodpfx Aou Nda Eefqsh Clamping surface of the table: 1100 x 600 mm Table feed: 1 – 3000 mm/min, stepless Operating hours: 82,194 h Total power requirement: 9.6 kW (12 kVA) Weight approx.: 4,200 kg Machine dimensions (LxWxH) approx.: 2.9 x 2.2 x 2.5 m Additional technical data: - Vertical table adjustment (Z-axis): 500 mm - Spindle head overhang, min./max.: 200 / 750 mm Equipment: - Coolant tank with pump - Handheld control device - Heidenhain linear measuring system

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 259 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1200002, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, As-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours. The machine is in impeccable optical and technical condition. Factory-prepared for full 4-/5-axis operation – the comprehensive 5th-AXIS package is installed: - Axis drives for 4th and 5th axes - Dynamic workpiece offset - Tool center point control - High-speed machining - Programmable coolant nozzle - Wireless Renishaw workpiece and tool probe The machine is also exceptionally well equipped: - TSC – through-spindle coolant supply with 21 bar - Spiral chip conveyor - Complete coolant maintenance package (automatic refilling, oil skimmer, mist condenser) - Fast 30+1 position tool changer - Spindle with 10,000 rpm Control system is the latest Haas Next Generation Control with touchscreen, WiFi, Ethernet, and HaasConnect remote monitoring. This enables the machine to be used immediately for demanding machining tasks. Original transport locks are included. Also supplied is a genuine Haas SK40 tool cart. Available approx. week 32. Inspection and demonstration under power are possible anytime by appointment. Loading and transport can be organized. A suitable TRT-210 CNC rotary tilting table is offered in a separate listing and can be included as a package on request. LANG base plates are not included in the scope of supply. Technical data: - Travels X / Y / Z: 1,270 × 508 × 635 mm - Spindle nose to table: 107 – 742 mm - Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg - Spindle: 10,000 rpm, BT/CT 40, inline direct drive, liquid-cooled - Drive power: 22.4 kW - Max. torque: 122 Nm at 2,000 rpm - Rapid traverse X / Y / Z: 25.4 m/min - Max. feedrate: 16.5 m/min - Tool changer: Side-mount SMTC, 30+1 slots - Max. tool diameter / length / weight: 64 mm / 330 mm / 5.4 kg - Tool change time (chip-to-chip): approx. 3.6 s - Power supply: 400 V / 50 Hz, 3-phase (internal transformer installed) - Compressed air: approx. 113 l/min at 6.9 bar - Coolant tank: 208 l - Weight: approx. 6,260 kg (with conveyor) Control: - Haas Next Generation Control with touchscreen - 1 GB program memory, Ethernet + WiFi - HaasConnect (remote monitoring), HaasDrop (wireless file transfer) Hedpfx Asy Tp E Ajfqjfh - M130 media display, safe run, synchronized tapping - Early power-fail detection module, surge protection - Features/options (all factory installed) - 5-axis package VF-YT (4th & 5th axis prepped, DWO/TCPC, high-speed machining, programmable coolant nozzle) - Wireless Renishaw probing system (intuitive) - TSC – through-spindle coolant at 21 bar - Spiral chip conveyor - Coolant maintenance package (automatic refilling, oil skimmer, mist condenser) - Additional coolant filter (bag filter 25 µm) - Chip pan filter set (200 µm) - Variable coolant flow (M-code controlled) - Door inner side air blast - Lifting lugs, touchscreen, door interlock

Stanje: rabljeno, Leto izdelave: 2015, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, proizvajalec krmilnikov: Haas, teža obdelovanca (maks.): 1.588 kg, skupna višina: 3.023 mm, skupna dolžina: 4.089 mm, skupna širina: 3.353 mm, vrtljajska hitrost (min.): 40 obr/min, največja hitrost vrtenja: 8.100 obr/min, skupna masa: 6.033 kg, Oprema: dokumentacija / priročnik, CNC vertikalni obdelovalni center CNC krmiljenje: Haas CNC Velikost mize: 1.321 x 457 mm Nosilnost mize: 1.588 kg Število palet: 1 x Pomik X-os: 1.270 mm Pomik Y-os: 508 mm Pomik Z-os: 635 mm Vpenjalo vretena: MAS BT40 Hitrost vretena: 40 - 8.100 obr/min Moč motorja vretena: 22,4 kW Kapaciteta orodjarne: 24 + 1 Za dodatna vprašanja o stroju ali za dogovor o ogledu nas prosimo kontaktirajte po telefonu ali elektronski pošti. Oglejte si tudi naše druge oglase za popoln pregled zaloge. Hfsdoy N A Ntopfx Afqeh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 5.792 h, potovalna razdalja osi X: 1.016 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, proizvajalec krmilnikov: HAAS, obremenitev mize: 794 kg, največja hitrost vretena: 12.000 obr/min, število osi: 3, Ce centre d’usinage vertical 3 axes HAAS VF-3SS a été fabriqué en 2015. Il dispose d’une table de 1.372 × 457 mm, d’une capacité de charge maximale de 794 kg et d’une vitesse de broche de 12.000 tr/min. La machine est équipée d’un changeur d’outils automatique latéral 30+1 ATC et d’une avance rapide de 30,5 m/min. Si vous êtes à la recherche d’une fraiseuse de haute qualité, considérez la HAAS VF-3SS que nous proposons à la vente. Contactez-nous pour obtenir davantage d’informations sur cette machine. • Électrique : • Tension : 354 / 488 V • Phases : 3 • Fréquence : 50/60 Hz • Puissance nominale : 40 A • Charge maximale : 70 A • Pouvoir de coupure en court-circuit : 10.000 A • Courant de court-circuit : 5.000 A RMS symétrique Hjdpex D I Smsfx Afqsfh • Heures machine (par la commande) : • Temps sous tension : 19.635 h • Temps de cycle démarré : 8.564 h • Table : • Dimensions : 1.372 × 457 mm • Changeur d’outils : ATC latéral 30+1 • Unité de commande : Commande numérique Haas

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 22.400 W, število osi: 3, This 3-axis vertical machining center, the HAAS VF-4SS, was manufactured in 2008. It offers a travel range of 1270 × 508 × 635 mm, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer featuring 40 + 1 positions and a high-speed machining package. If you are looking for a high-quality milling machine, consider the HAAS VF-4SS that we are offering for sale. Contact us for further information. • Spindle-to-table distance: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max. cutting feed rate: 20.5 m/min • Rapid traverse (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system Hfjdpfsx D Irmox Afqjh • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment: • Auger-type chip conveyor • Additional high-pressure filtration system

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 3 MILLING SPINDLE - Tool holder: BT40 - Spindle drive power: 15 kW - Spindle speed: 8,100 rpm - Gearbox - Number of spindle speed ranges: 2 - Spindle hours: 4,000 h LINEAR AXES - Travel X/Y/Z axes: 1,270 / 508 / 635 mm - Rapid traverse speed (X/Y/Z): 35.6 / 35.6 / 35.6 m/min - Feed speed (X/Y/Z): 21 m/min - Distance from table to spindle nose: 742 mm TOOL CHANGER - Tool changer type: Arm-type - Number of tools in magazine: 40 TABLE - Table size: 1,321 x 495 mm - Max. table load: 794 kg ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power installed: 30 kW WEIGHT AND DIMENSIONS - Footprint: 3,870 x 2,510 mm - Machine height: 2,690 mm - Machine weight: 6,260 kg MACHINE HOURS - Power-on hours: 16,247 h - Operating hours: 6,025 h EQUIPMENT - CNC control: HAAS - Interface: Ethernet / RS232 / USB / PCMCIA - Teach-in programming Hsdpfsyn R Igsx Afqsfh - Electronic handwheel - Synchronized tapping - Prepared for 4th and 5th axis rotary table - Coolant tank: 208 l - Chip conveyor - Tool measuring probe - Electrical transformer

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 9.000 h, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Control system: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub Spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools on Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tooling System Turning tools (12x12x130): 5 Tool holder / Cut-off tool (16x12x130): 1 Drilling tools (front side): min. 3 Drilling tools (rear side): 5 Tool holders, tailstock (diameter): 19.05 mm Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Main/sub spindle collet: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Hfjdexf Hqqjpfx Afqoh Machine Specifications Footprint (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Input power: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section) - 3 driven tools for cross machining - 3 driven tools for face machining on the main spindle - 3 driven tools for face machining on the sub spindle - Main spindle with C-axis - Sub spindle with C-axis - 3x driven tools for rear side machining - Yellow warning light - Interior lighting - Workpiece conveyor belt - FMB Turbo 3-26 loading magazine - Option for long parts - Spindle flushing (Scherzinger pump)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1062021, proizvajalec krmilnikov: HAAS/FANUC, največja hitrost vretena: 10.000 obr/min, število mest v zalogovniku orodij: 40, TEHNIČNI PODATKI Hfjdpfx Afexuidxoqsh Največja hitrost vretena: 10.000 vrt/min PODATKI O STROJU Izmenjevalec orodij: 40-kratni Vpenjalo orodij: BT40 Krmiljenje: HAAS/FANUC