Parni kotel

Loos U-HD 1250 kg/h x 13 bar

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Táto Felder FW 1102 P bola vyrobená v roku 2021. Ide o použitý širokopásový brúsny stroj s kontaktnou valcovou jednotkou a jemným dobrusovaním prostredníctvom segmentovaného elektropneumatického brúsneho topánky. Je vybavený 7" farebným dotykovým displejom, digitálnou kompenzáciou zrna a vákuovým pracovným stolom. Rýchlosť posuvu je plynulo nastaviteľná od 2,5 do 18 m/min, brúsna šírka je 1100 mm a výškový rozsah 3 až 170 mm. Využite príležitosť na kúpu tohto širokopásového brúsneho stroja Felder FW 1102 P. Pre viac informácií nás neváhajte kontaktovať. • Kontaktná valcová jednotka • Jemné brúsenie so segmentovým elektropneumatickým brúsnym topánkom, šírka segmentu 25 mm • 7" farebný dotykový displej • Digitálna kompenzácia zrna • Vákuový pracovný stôl s ventilátorom zabudovaným v ráme stroja • Plynulo nastaviteľná rýchlosť posuvu 2,5-18 m/min (ovládanie cez dotykový displej) • Brúsna šírka: 1100 mm Bodpfx Ajx D Eyhjkrjdc • Brúsna výška: 3-170 mm • Brúsna dĺžka: 1900 mm

Stanje: zelo dobro (rabljeno), moč: 16.000 kW (21.753,92 KM), vrsta goriva: dizel, skupna masa: 14.000 kg, Leto izdelave: 1998, obratovalne ure: 622 h, izhodna napetost: 400 V, nazivna moč: 1.600 kW (2.175,39 KM), nazivna (navidezna) moč: 2.000 kVA, izhodna frekvenca: 50 Hz, največja hitrost vrtenja: 1.500 obr/min,

Stanje: novo, Table width: 3000 mm Table length: 1500 mm Torch heads: 1 Control system: CNC Feed rate: 20,000 mm/min Bdsdpfxjpm U U Ns Akrjc Total power requirement: 15 kVA Required floor space: approx. 4.5 x 2.5 m * Heavy-duty machine bed with precision guides for smooth machine movement * Ball-bearing cross carriage for height adjustment with 400 mm vertical stroke * Thermal separation of drive and cutting areas ensures maximum precision * Automatic height sensing and torch height control during cutting * Torch holder with collision protection and automatic shut-off in case of collision * Machine setup or relocation possible using a plug & play process with forklift, pallet truck, or crane * 3-sided access to the cutting area due to cantilever design SATOTEC Downdraft Table: The SATOTEC table system features a robust table construction for a max. cutting thickness of 150 mm. For cutting workpieces up to 150 mm thick, oxy-fuel cutting technology is required. The workpiece support frame is fitted with replaceable flat steel slats, 3 mm thick and mounted at a 45° angle. The slat spacing is 50 mm. Kjellberg Q1500 Power Source: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and under water * Recommended cutting range 0.5 to 40 mm * Maximum pierce thickness 30 mm, upgradable using ProPierce Technology * Marking, notching, and center punching possible even on coated metal materials * Inverter power source with digitally controlled, fully electronic process * Integrated cooling with semi-automatic filling and draining Gas Control: Fully automatic, processor-controlled plasma all-gas console Q-Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control TEKA EcoCube 5.5 kW Extraction Unit Filter medium: dry, grease-free or oil-free dust/fume Filter area: 100 m² (4 cartridges at 25 m² each) Filter cartridge: BIA M, Type Nano Separation efficiency: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4,500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50Hz or 480V 60Hz Current draw: 11.5 A Current type: 3Ph+N+PE Fan mounted on the system, incl. silencer bend, right side Motor control: frequency inverter Noise level: 75 dB(A) + max. 10 dB(A) during cleaning pulse Intake socket: NW 250 mm via intake duct, left side Exhaust: via silencer bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Closing hooks and toggle latches - Compressed air connection and condensate drain each fitted with a bulkhead fitting - Compressed air connection with hose tail d=8mm - System equipped with grounding stud - Cables in UL specification - EATON frequency inverter on the left in the attached control cabinet

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, pritisk: 70 letvica, skupna višina: 1.600 mm, skupna širina: 800 mm, skupna dolžina: 1.200 mm, temperatura: 40 °C, obratovalni tlak: 70 letvica, raven hrupa: 80 dB, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 l/day Potable Water Compact, fully automatic reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, small industrial and utility facilities. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: approx. 15,000 l/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salt content) Permeate Quality: Drinking water, approx. 500 mg/l residual minerals (reference value) Recovery Rate: approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: approx. 25 °C (operating range approx. -2 to 35 °C) Process Technology & Construction DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Generally no chemical feed water pretreatment (no acid dosing) required Integrated rinse and CIP function, controlled via PLC Skid-mounted on stainless steel frame (AISI 316) High-pressure piping in stainless steel, low-pressure side in seawater-resistant plastic Pump parts in contact with seawater made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: approx. 1,000 l/h (reference value) Operating Pressure RO Module: High pressure range, designed for seawater desalination Power Connection: 230 V, 50 Hz, 1~ Power Rating: approx. 6 kW Bdodpfx Ajw Uf Ihokroc Control, Monitoring & Safety Local control panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown, including: - Insufficient inlet pressure - Exceeding the allowable operating pressure - Overpressure in the permeate/concentrate line - Exceeding defined conductivity limits (with automatic diversion to drain) Automatic “Stop & Rinse” function: rinse of seawater-carrying components with permeate upon shutdown to reduce fouling during idle periods Dimensions & Weight (Skid) L × W × H: approx. 1,190 × 705 × 1,500 mm Weight: approx. 530 kg (dry), approx. 605 kg (in operation) Typical Applications Ships, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility facilities Backup or peak-load system for existing drinking water production Further technical documentation, photos, as well as information regarding scope of delivery, pricing, and availability are available on request.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 8.348 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2887, pritisk: 8,5 letvica, moč: 2,276 kW (3,09 KM), obratovalni tlak: 8 letvica, temperatura: 176 °C, skupna višina: 2.950 mm, skupna dolžina: 5.100 mm, nazivna toplotna moč: 2,276 kW (3,09 KM), skupna širina: 2.400 mm, lastna masa: 6.500 kg, Oprema: CE označba, ATTSU RL3000/8 parni generator za prodajo. Parni generator je v zelo dobrem stanju in ima malo obratovalnih ur – zgolj 8348. Generator je bil uporabljen v tovarni vložene zelenjave, ki je prekinila z delom. Kotlovnica je od takrat ustrezno konzervirana. Kotel vključuje gorilnik na kurilno olje (opcijsko), lahko pa deluje tudi na plin. Pregled kotla je bil opravljen junija 2025 s strani specialista za kotle, ki je zajemal meritve debeline sten in tlačni preizkus. Rezultati preizkusa so bili ugodni. Tehnični podatki kotla: Proizvajalec: ATTSU Model: RL 3000/8 (cevni) Gorilnik: Kurilno olje Serijska številka: 2887 Parna zmogljivost: 3000 kg/h nasičene pare Nazivni tlak: 8,3 bar Preizkusni tlak: 12,5 bar Bdjdpewxd Atsfx Akroc Volumen: 3125 litrov Leto izdelave: 2008

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, moč: 600 kW (815,77 KM), 1 used Weishaupt oil burner Bodpfjuugwcsx Akrodc ----- Model : WM-L20 / 2-A Version : R NOx Class : 2 Output : 600 - 2,100 kW Oil throughput : 50 - 176 kg/h Year of manufacture : 2010 with WFM 100

Leto izdelave: 2006, stanje: rabljeno, Yamato ADW 514 večglavna tehtnica MHW: Yamato Sigma 514SV Zaščitni razred: IP65 Tehtalna zmogljivost: 20 – 2000 gramov na izpust Tehtalni volumen: maks. 5 litrov na izpust Podrobnosti konfiguracije: Bedpsudqmrofx Akrodc Stroj popolnoma izdelan iz nerjavečega jekla 304. TC: 15 °C, vibracijski tip LFP: Siemens tipa Sigma Dovajalna vedra: dvojno odpiranje vrat Prostornina dovajalnega vedra: > 2,5 litra Tehtalna vedra: dvojno odpiranje vrat Prostornina tehtalnih vedrov: > 2,5 litra Zbirni žlebovi: 60° HMI: barvni zaslon na dotik RCU810 Model je opremljen z novejšo, nadgrajeno RCU (krmilna plošča). MHW: Yamato Sigma 514SV HMI: barvni zaslon na dotik RCU810 Prostornina vedrov: > 2,5 litra

Stanje: rabljeno, Leto izdelave: 1992, Technical details: Maximum temperature: 120 °C Internal diameter: 980 mm Internal length: 2580 mm External diameter: 1500 mm External length: 2740 mm Wall thickness: approx. 6.5 mm Capacity: approx. 2000 l Weight: 1425 kg Bdedpfx Aeu Nz I Tskrjc Tank for autoclave The tank is unused. It is possible that this autoclave was designed for the steam sterilization process (according to operating parameters). The operating overpressure of +2 bar per chamber presumably refers to the execution of the steam sterilization process, not to the pressure rating of the tank. Permissible operating temperature 120 °C Sold as is, in good used condition.

Leto izdelave: 1993, stanje: zelo dobro (rabljeno), 2 kosu centrifugalnih črpalk Proizvajalec: KSB Model: WKF 50/7 Pretok: 5,5 l/s (19,8 m³/h) Dvižna višina: 214 metrov (21,4 bar) Bdedoibwarepfx Akrjc Maks. temperatura: 130°C Tesnilo: Mehansko tesnilo z priključkom za zaporno vodo Elektromotor: VEM Pogonska moč: 30 kW Hitrost vrtenja: 2935 obr/min ! Cena na kos !