Stroj za vrtanje globokih lukenj

LOCH TB 2 15 30001KT

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Control: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant through spindle Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Iasdpfx Asvgxfyef Tjl The machine is supplied with many tools.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, višina središča: 525 mm, teža obdelovanca (maks.): 5.000 kg, dolžina brušenja: 4.000 mm, premer brusilnega koluta: 1.060 mm, Stroj je bil prenovljen (retrofit) v letu 2024. Krmiljenje Siemens Sinumerik 840D. Iasdpfjw Ngm Uex Af Tsl

Leto izdelave: 2002, Stanje: zelo dobro (rabljeno),

Leto izdelave: 1996, Stanje: rabljeno, Schütte SF 26S DNT Year of manufacture: 1996 Control: Siemens 840C Number of spindles: 6 Iedpoi Hb Szsfx Af Toal Max. bar diameter [mm]: 26 Bar loader magazine: Cucchi BLT Multi-6 (year 2015) Positions I + III + IV + VI: Longitudinal and cross slides Positions II + V: CNC slides Feed in position VI Pick-off device in position VI Coolant system Ruez hinge belt conveyor integrated in machine bed Knoll hinge belt conveyor 280 S-1/40 ID 26565 (external) Electrostatic separator ISI RON/A 2500A, ID 26295

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 1.150 mm, skupna masa: 12.000 kg, premer vrtanja: 32 mm, Heidenhain iTNC530 CNC control 12-position tool changer Technical data: Travels: X-axis longitudinal (table): 1800 mm Z-axis cross (column): 1700 mm W-axis cross (drilling unit): 1150 mm Iodpfewcldaox Af Toal Y-axis vertical (drilling unit): 1200 mm B-axis (rotary table): 360° A-axis (drilling unit): -25° to +15° Deep drilling area (ELB): Diameter range: 6–32 mm Max. drilling depth: 1150 mm Drive power: 40 kW Machine weight approx.: 12,000 kg Technical data, accessories, and machine description are non-binding. For further technical details, please refer to the photos.

Stanje: dober (rabljeno), Leto izdelave: 2003, Main spindle: Speed range – main spindle: max. 6,000 rpm Drive power – main spindle: 16 kW Max. torque: 155 Nm C-axis: 360° Tool turret: Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range – driven tools: max. 5,000 rpm Iaedpev Drigefx Af Tol Drive power – driven tools: 10 kW Tool holder: (VDI 30) Tool shank: 20 x 20 mm Travel distances: X-axis: 160 mm Z-axis: 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 rpm Max. torque C: 155 Nm Total connected load: Approx. machine weight: 3.7 t Approx. space requirement: 4.5 x 2.5 x 2.5 m Control: Heidenhain Hollow clamping cylinder C-axis and tool drive Chip conveyor Oil and emulsion mist separator with electrostatic filter

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: nepreverjeno, Berstorff mixing mill 400 x 900 mm Isdpfxsr A Dfyj Af Tjal For more details, see the attached description!

Leto izdelave: 1997, Stanje: generalkompletno obnovljen (rabljeno), 2 units of spiral casing pumps in process design 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. All seals replaced with new ones. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type (drive side): oil Lubricant monitoring: oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Discharge cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction port nominal diameter: DN 80 Discharge port nominal diameter: DN 40 Iodpeiuznusfx Af Teal Nominal pressure suction: PN 10 Nominal pressure discharge: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Insulation class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process industries - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and conveying - Flue gas desulphurisation plants - Acidic, chloride-containing washing suspensions - Acidic process waters - Wastewater treatment/sewage plants - Offshore and marine engineering

Leto izdelave: 1998, Stanje: skoraj kot novo (rabljeno), Type of Laser: Q-switched pulsed solid-state laser Laser Medium: Nd:YAG Wavelength: 1064 nm Beam Diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Beam Divergence: 5 mrad multimode, 2 mrad TEM00 Pulse Duration (Time): CW / 90 ns Max. Output Power: 65 W (130 W optional) multimode, 16 W single mode Iaodpfod Dhw Nsx Af Tol Pulse Energy: 16 mJ (30 mJ optional) at 3 kHz Operating Modes: CW, Q-switched from 0.1 to 100 kHz Beam Deflection System: Galvanometer system Line Width in mixed mode: approx. 0.12 mm

Stanje: dober (rabljeno), Leto izdelave: 2011, GILDEMEISTER CNC twin-spindle turning center Model: CTX beta 1250 4 A Machine No.: 00700000211 Iaodpfowcxlwox Af Tol Year of manufacture: 2011 Control: CNC path control incl. 19” TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and ShopTurn 3 G Power-on hours: 41,378 h Program run time: 24,814 h Technical data and equipment available on request