Palični nakladalnik

LNS SPRINT

Stanje: dober (rabljeno), Leto izdelave: 2007, 1 x bar feeder Hnjdjvt N Dyjpfx Abxen LNS Sprint 555 Year of manufacture: 2007 Bar diameter: 5 - 55 mm Bar length: 3,200 mm Previously installed on a Goodway CNC lathe. The bar feeder can be inspected at any time at our warehouse in Reichenbach.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Parts Cleaning Machine / Spray Cleaning System Type TR450 The spray-rotation cleaning system type TR450 is an automated cleaning and degreasing unit featuring a lid that opens easily upwards. The system is designed for cleaning single parts and/or bulk materials in baskets sized LxWxH 520x320x200h mm. During the cleaning process, the basket must be closed with a lid. The cleaning result depends on a slight tumbling motion of the parts within the basket when cleaning bulk material; the fill level in the basket must be observed accordingly. Additionally, the unit is equipped with a flood tray beneath the goods basket, allowing for immersion rinsing of the parts, thereby achieving an even better cleaning result. Including the following features: • Fully made of stainless steel 1.4301, inside and outside Hnjdpfsfbt Sisx Abxsn • Level monitoring and automatic fresh water refill • Full system insulation • Hot air drying (power: 11.6 kW) • Steam vapor extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket, 520x320x200h mm, mesh size: 6x6 mm, with height-adjustable locking lid Connected load: approx. 20 kW (32 amp plug)

Stanje: dober (rabljeno), Leto izdelave: 2001, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.460 mm, dolžina mize: 3.800 mm, širina mize: 1.000 mm, obremenitev mize: 30.000 kg, Chip conveyor Double doors on the front side Chain-type tool changer (30 positions) Hnsdoxc Hh Dopfx Abxen Central lubrication system High-pressure coolant system 16 bar and 2.2 kW, flow rate 16 l/min Tool clamping force: 1968 daN Complete documentation and machine from first owner X-axis travel: 3200 mm Y-axis travel: 1200 mm Z-axis travel: 1460 mm Table length: 3800 mm Table width: 1000 mm Table load capacity: 30,000 kg Spindle power: 41 kW Spindle speed: 3,000 rpm Tool holder: ISO 50 / BT / MK Feed rate X-axis: 10,000 mm/min Feed rate Y-axis: 10,000 mm/min Feed rate Z-axis: 10,000 mm/min Auto-indexing milling head: 2.5 x 2.5° Operating hours: 10,659 h Length: 8,820 mm Width: 6,250 mm Height: 3,910 mm Weight: 33,000 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, wherever possible, obtained from the manufacturer. The details are given in good faith, but accuracy cannot be guaranteed. Accordingly, no representations or contractual terms are implied. We recommend verifying all important details.

Leto izdelave: 2001, stanje: dober (rabljeno), Universal CNC cycle lathe by Pinacho, suitable for tooling, fixture construction, training, and mold making. Swing diameter: 360 mm Control unit: Fagor 8055 Technical Specifications: - Swing diameter: 360 mm - Distance between centers: 1000 mm Hodpfsfglzgox Abxonn - Control: Fagor 8055 - Tailstock: Morse taper 3 - Tool turret: Barufaldi, 6-position - Spindle speed: 1–4000 rpm - Electrical connection: 380 V, 5.5 kW Contact: AWM GmbH Mr. Mario Wurm

Stanje: kot nova (razstavni stroj), 1 universalni rezkalni glavi, neuporabljeni, namenjeni naknadni vgradnji na konvencionalne, NC ali CNC rezkalne stroje ali vrtalne stroje katerekoli vrste, sistem "HURON", z dvoosnim nagibanjem, vsak kot nastavljiv. Priključek: ISO 40 Iztek: pribl. 360 mm Nazivna pogonska moč: 10 KM Najv. hitrost: 1800 vrt/min Teža: pribl. 82 kg Dodatki / Posebnosti: • Ročno vpenjanje orodja • Glavno vreteno ter vsi menjalniki in osi so izdelani iz cementiranega in poboljšano krom-nikljevega jekla • 2 medsebojno vrtljivi osi omogočata nastavitev vsakega kota – sistem "HURON" • Stožčasti zobniki brušeni po "KLINGELNBERG" sistemu • Ležaji glavnega vretena so visokonatančni stožčasti valjčni ležaji • 1 privijač orodja • Navodila za uporabo Dobavni rok: takoj, pridržana možnost predhodne prodaje Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Hnsdpfx Abodbny Eoxen

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20194, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.500 mm, moč: 49 kW (66,62 KM), Značilnosti Visoka togost za težko obdelavo Hedpfsx S Hgzjx Abxjnn Velika miza za nadstandardne obdelovance CNC krmiljenje HEIDENHAIN TNC 530 za precizne operacije Avtomatski menjalec orodij s 50 pozicijami Centraliziran sistem mazanja in hidravlike

Stanje: dober (rabljeno), Leto izdelave: 2018, obratovalne ure: 7.819 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 720 mm, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 50 m/min, STANDARD TECHNICAL SPECIFICATION – MAZAK CAPACITY Table working area (length): 2,500 mm Table working area (width): 820 mm Longitudinal (X-axis travel): 2,000 mm Bridge (Y-axis cross travel): 800 mm Spindle head (vertical Z-axis travel): 720 mm Minimum distance from spindle nose to table top: 140 mm Maximum distance from spindle nose to table top: 860 mm Table load capacity (uniform load): 1,700 kgf Spindle head rotation (B-axis): ±110° SPINDLE HEAD Spindle taper: 7/24 taper, No. 40 Maximum spindle speed (standard): 18,000 rpm Minimum spindle speed (standard): 35 rpm Spindle motor output (continuous): 26.0 kW FEED RATES Rapid traverse (X-axis): 50 m/min Rapid traverse (Y-axis): 50 m/min Rapid traverse (Z-axis): 50 m/min TABLE Table length: 2,500 mm Table width: 820 mm T-slot width: 18 mm Number of T-slots: 7 Distance between centers: 100 mm Height from machine base to table surface: 870 mm AUTOMATIC TOOL CHANGER Tool magazine capacity (standard): 30 Tool magazine capacity (optional): 48 Tool selection: Mazatrol memory random access Tool holder type: CAT-40 / MAS BT-40 Max. tool diameter with adjacent tools: 80 mm Max. tool diameter without adjacent tools: 130 mm Max. tool weight (with holder and retention knob): 8 kgf Total tool magazine max. weight: 150 kgf Max. tool length (from gauge line): 350 mm Tool change time (chip-to-chip): 4.7 s MACHINE DIMENSIONS Machine height (from floor): 3,355 mm Machine width: 4,250 mm Machine depth: 4,046 mm Machine weight: 14,000 kg OTHER Power supply voltage: AC380/400/415V ±10% Power supply frequency: 50/60 Hz ±1 Air pressure: 0.5–0.9 MPa Air consumption: 260 l/min Coolant tank capacity: 450 L STANDARD MACHINE EQUIPMENT – MAZAK GENERAL MACHINE OPTIONS Foundation kit (base bolts & plates) One set of setup tools Work area lighting Power transformer for European market USB interface (1 port) MANUALS AND DOCUMENTATION One set of documentation (CD) SPINDLE SPEED Spindle speed: 18,000 rpm (#40) MACHINE BODY COLOR Hsdpfxjya Hnge Abxjnn Mazak standard color (F white / S black) SAFETY & HEALTH Worldwide safety standards Work area door interlock with safety switch Full enclosure Complete chip and coolant protection system TOOL MAGAZINE 30-station tool magazine COOLING SYSTEMS Complete cooling system HIGH PERFORMANCE/ PRESSURE COOLING Through-spindle coolant (5 bar, 71 PSI) PRODUCTION AUTOMATION SYSTEMS Automatic power on/off + warm-up MEASURING SYSTEMS Automatic tool length measurement & breakage detection POSITIONING SYSTEM Absolute positioning system CHIP CONVEYOR Preparation for chip conveyor (left side) NC CONTROL – 15 Features 19" color LCD (touchscreen) 3-D coordinate conversion Transfer detection (B) Shape compensation for rotary axes EIA/ISO code input function (standard) Background tool path verification LAN connection High smoothing control Mazak 2D software (shape compensation) Mazak 3D high-speed software package Mazak tapping / pre-drilling Tornado (Mazatrol) Mazatrol SmoothX CNC Movable control panel SD memory interface (1 slot) + USB interface (1 slot) Smooth standard software

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, potovalna razdalja osi X: 1.020 mm, pomik osi Y: 540 mm, pomik po osi Z: 510 mm, skupna višina: 2.700 mm, obremenitev mize: 800 kg, skupna masa: 6.500 kg, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 18.500 W, največja dolžina izdelka: 3.985 mm, število osi: 4, This 4-axis DOOSAN DNM 500II was manufactured in 2016 and features a table size of 1200 × 540 mm with a maximum table load of 800 kg. With an X-axis travel of 1020 mm and a spindle speed of 12,000 rpm, this vertical machining center provides efficient machining capabilities. Check the availability of this DOOSAN DNM 500II vertical machining center. Contact us for further details. • Operating hours: 4,500 • Table size: 1200 × 540 mm • Rapid traverse: X/Y 36 m/min, Z 30 m/min • Tool changer: free-arm, 30 stations • Coolant system: through-spindle coolant 20 bar, flood coolant • Prepared for: 4-axis operation • Control: FANUC Oi-M Easy Guide; 200 look-ahead blocks; electronic handwheel; USB port • Other features: automatic door opening/closing; 3-color status light; documentation and CD-ROM • Condition: Good; perfect working order • Availability: Immediately available Additional equipment: • 4th axis: NIKKEN CNC202FA • Chip conveyor • Belt oil skimmer • Air/coolant guns Hnsdpfjyg Iltex Abxjn Technical Specification: Taper Size BT 40

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Grinding length: 600 mm Grinding width: 0 mm Total power requirement: 7.5 kW OFFER We can offer you – subject to prior sale and errors excepted – the following, available from stock: GEIBEL & HOTZ CNC Horizontal Surface & Profile Grinding Machine Model: FS 6-Z CNC Year of manufacture: 1996 Maximum grinding length (table longitudinal travel 660 mm): 600 mm Maximum grinding width (cross travel max. 360 mm): 0 mm Maximum grinding height under wheel: approx. 375 mm Distance table – spindle centre min / max: 140 / 525 mm Standard magnetic chuck size: 600 x 0 mm Table clamping area: 820 x 0 mm Maximum table load: 400 kg Table speed: m/min Cross movement / table stroke: 3 - 40 mm Rapid cross/vertical feed: 5 m/min Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle speeds, adjustable: 1,000 – 3,000 rpm Grinding spindle drive approx.: 7.5 kW Total drive approx.: 15 kW – 400 V – 50 Hz Weight approx.: 2,600 kg Accessories / Special equipment: Hodpfx Ajx Haryobxonn • SIEMENS CNC Control type 840 D with comprehensive GEIBEL&HOTZ grinding software, user-friendly interface, text and graphic support, easy programming even for complex grinding wheel contours and fast linking of grinding operations • All standard grinding programs and cycles such as surface and multi-surface grinding with roughing – finishing – sparking out – return, plunge grinding, automatic dressing with compensation, etc. • Electronic handwheel for 3 axes • Table movement via toothed belt drive, allowing both very high and very low table speeds, ideal for profile grinding • Dressing device with swing diamond, mounted on left side of table, with automatic dressing cycle, compensation, and for profile dressing as well • Fixed dresser with interchangeable mounting, left side of table • Mounted sine table permanent electro-magnetic chuck approx. 600 x 200 mm, fine-pole • Wet grinding unit with separate band filter coolant filtration • Separate electrical cabinet, work lamp, various accessories, operating manuals Condition: Good to very good condition! Suitable for all grinding applications! Please click here for a video of the machine: Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net – upon receipt of invoice Always a large selection of grinding machines in stock – please let us know your requirements!

Stanje: rabljeno, Leto izdelave: 2012, stružna dolžina: 300 mm, premer struženja: 200 mm, CNC stružnica DMC Korea model DL8TM Os C s pogonskimi orodji Glava z 12 orodji na VDI30 Vpenjalna glava 210mm Premer vretena 51mm Dolžina struženja 300mm Hedpfx Aoxgqrnsbxsnn Premer struženja 200mm Lovilec kosov Konjiček Transporter odrezkov