Avtomatski stružnica za palice

LNS SPRINT 565 S2+ 2024year

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, TECHNICAL DETAILS: - CNC Control: MSX 803III - X Axis mm: 260 mm - Z Axis mm: 590 mm - Y Axis mm: +/- 50 mm - Maximum Turning Diameter mm: 356 - C Axis Increment: 0.001 - Maximum Turning Length: - Rapid Traverse Rate mm/min X, Z, Y: Lhjdpowdrfgefx Aghop - Swing Over Bed mm: - Swing Over Cross Slide mm: - Bar Capacity mm: Ø 65 (main) - Max. Rapid Traverse m/min X, Z: - Main Spindle 12” - Spindle Speed rpm: 5,000 rpm - Spindle Power kW: 18.5 kW - Torque Nm: - Main Spindle Bore mm: - Main Spindle Nose: A2-6 - Sub-Spindle: - Sub-Spindle Speed rpm: 6,000 rpm - Sub-Spindle Power kW: 11 kW - Torque Nm: - Sub-Spindle Bore mm: - Sub-Spindle Nose: A2-5 - Turret Positions: 12 - Number of Driven Tool Stations: 12 - Driven Tool Speed rpm: 6,000 rpm - Driven Tool Power kW: 5.5 EQUIPMENT: - Chip conveyor - 3-colour status lamp - Fixed tool holders - Parts catcher MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 600 mm, INDEX C65 CNC Turning and Milling Center Control: Index C200-4D (Siemens 840d) Lhjdpfev Dgpzox Aghsp 3 turrets with 12 stations each, VDI-25 with W-teeth, all stations powered C-axis on main and counter spindle Transmit/Transcyl function Index tool breakage monitoring Parts portal loader/parts conveyor 600L coolant tank with strainer, 8/18 bar Inline chiller for coolant Bar passage up to 65mm on main and counter spindle FMB Turbo 10-65, 3-meter bar loader Chip conveyor Machine will be cleaned and loaded onto truck free of charge

Stanje: delavnici obnovljeno (rabljeno), potovalna razdalja osi X: 310 mm, pomik osi Y: 294 mm, pomik po osi Z: 210 mm, skupna masa: 3.000 kg, največja hitrost vretena: 50.000 obr/min, Used HSC Machine RXD5 -Refurbished- The machine is fully refurbished, inspected, and measured at our facility. The machine once again meets new machine tolerance specifications! Working Area: - X-axis: 200 mm - Y-axis: 294 mm - Z-axis: 200 mm - Linear Axis Drives: Linear motors on all axes. - Rotary Axis Drives: Highly dynamic direct drives with integrated cooling. - Feed rates: 0 - 40,000 mm/min on all linear axes. - Network connection: - Tool measurement laser: Diameter and contour measurement, tool wear monitoring, and tool breakage control for milling tools. - Chuck control, 1st chuck - Emulsion cooling system with mechanical oil mist extraction - RMS Main Job Manager - Spindle max. 60,000 rpm HSK 25 - 24-position tool changer for parallel main time tool changes - High-precision option - Remote maintenance via TeamViewer - Transport dimensions (machine): Lsdpfx Aolzhhkoghjhp W 2,425 x D 1,925 x H 2,070 mm - Weight: approx. 3,000 kg The machine can be inspected in operational condition at any time. For more information about the type and scope of our refurbished machines, feel free to visit our website or our Hüttmann YouTube channel.

Stanje: pripravljen za uporabo (rabljen), Two identical Keyence measuring devices are available. Lhsdpfx Aethmffeghsp Image sensor: 1-inch 6.6 megapixel CMOS Lens: Double telecentric lens Wide field diameter/length: 100 mm / 200 mm High precision diameter/length: 25 mm / 125 mm Repeatability: - Without stage movement: ±1 µm (wide field), ±0.5 µm (high precision) - With stage movement: ±2 µm (wide field), ±1.5 µm (high precision) Measurement accuracy (±2 sigma): - Without tracking: ±5 µm (wide field), ±2 µm (high precision) - With tracking: ±(7 + 0.02L) µm (wide field), ±(4 + 0.02L) µm (high precision)

Stanje: rabljeno, Description: General: Year of manufacture: 2009 Control: Siemens 840 Dsl (C200-4D SL) Bar capacity: 65 mm Milling spindles: 18,000 rpm Main spindle: Technology: Motor spindle Speed: 5,000 rpm Max. Power: 35.5 kW Max. Torque: 170 Nm C-axis: 0.001° Z-axis: 390 mm Bar capacity: 65 mm Clamping cylinder: Hollow clamping cylinder Chuck: 3-jaw chuck Sub spindle: Technology: Motor spindle Speed: 5,000 rpm Max. Power: 35.5 kW Max. Torque: 170 Nm C-axis: 0.001° X-axis: 600 mm Z-axis: 390 mm Bar capacity: 65 mm Chuck: 3-jaw chuck Tool carrier I: Technology: Milling spindle on cross-slide Speed: 18,000 rpm Tool holder: HSK 40 X-axis: 350 mm Y-axis: 160 mm (+/- 80 mm) B-axis: 230° Tool carrier II: Technology: Milling spindle on cross-slide Lhedpsvxmy Nefx Aghop Speed: 18,000 rpm Tool holder: HSK 40 Y-axis: 160 mm (+/- 80 mm) B-axis: 230° Tool magazine: Technology: Chain magazine Number of stations: 80 pcs Tool changer: Double gripper Max. tool length: 180 mm Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system with filter Parts removal: Gantry parts picker Bar feeder interface: Electrically pre-equipped Tool monitoring: Drill breakage control

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machinable length: 200 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 7 - Number of driven positions: 3 Lodpfx Aouhazmjghehp - Driven tool speed: 5,000 [rpm] FRONT TOOL POST - Number of positions: 4 BACKWORKING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 44,325 [h] ACCESSORIES - Control: Meldas - Driven guide bushing - Parts catcher - Parts conveyor belt - Parts ejector - Coolant tank: CoolBlaster * with high-pressure pump: 138 [bar] - Bar feeder: LNS Alpha ST320 - Fire suppression system * * Please note: Functionality not guaranteed. Must be checked by a qualified company on behalf of the buyer. - Electrical transformer

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Leto izdelave: 2001 X - 548,6 mm, Y - 408,9 mm, Z - 459,7 mm Moč - 5,6 kW Lhodjgx Aafopfx Aghep Obrati - 15.000 rpm Avtomatski menjalec orodja (ATC) - 30 Miza - 599,4 mm x 378,5 mm Konus - BT40 Krmiljenje - CNC (Yasnac J300) Teža stroja: 4 tone Dimenzije stroja: 7' x 8' x 9'

Stanje: rabljeno, Turning diameter . mm Turning length . mm Swing diameter over bed slide . mm Ledeqn A Rropfx Aghohp Emco Hyperturn 665 (3 units) - Technology: Lathe - Machine designation: EMCO Hyperturn 665 Lathe - Year of manufacture: 2003 / 2012 / 2013 - Control: Siemens Sinumerik 840D-PCU 50 V1 - Attachments: Coolant system; chip conveyor - Electrical supply data: - Rated current: 110.00 A - Backup fuse: 125.00 A - Connected load: 56.00 kW

Stanje: rabljeno, Leto izdelave: 2017, Doosan Puma GT3100M letnik 2017 Leto izdelave: 2017 Krmiljenje: Fanuc 0i-TF Premer struženja: 376 mm Dolžina struženja: 1245 mm Glavna glava: Glava z jermenskim pogonom Maks. število vrtljajev: 2800 obr./min Maks. moč: 22 kW Maks. navor: 1124 Nm Kapaciteta palice: 102 mm 3-čeljustna vpenjalna glava Schunk ROTA THW plus 315-104 Revolver s 12 postajami BMT65 revolverska glava Pomik po oseh X/Z: 260/1350 mm Lhedpfx Aoxggkteghep

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Spindle nose: A2-5 - Spindle drive power: 22 kW - Spindle speed: 6000 rpm - Max. bar diameter: 60 mm - Max. machinable diameter: 200 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 22 kW - Spindle speed: 6000 rpm Ljdpfx Aeu Hadheghehp - Max. bar diameter: 60 mm - Minimum C-axis resolution: 0.001° - Z travel: 445 mm TURRET 1 - Number of positions: 14 - Number of driven positions: 14 - Travel X/Z: 105/400 mm - Travel Y: 120 mm - B-axis stroke: +90/-270° - Tool type: VDI 25 - Driven tools speed: 6000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 4,975 x 2,890 mm - Machine height: 2,050 mm - Machine weight: 4,800 kg EQUIPMENT - Control: Siemens 840C - Coolant tank * with high-pressure pump - Chip conveyor - Parts removal system - Parts conveyor belt - Bar feeder: LNS