Tračni transporter Tračni transporter Tračni transporter

Lippert 3150-900-700

Stanje: rabljeno, Lippert Belt Conveyor, Belt Conveyor System GF 3150-900-700 RA2113 Technical Specifications: Conveyor length (NL): 3150 mm Frame width (NB): 900 mm Belt width (GuB): 700 mm Overall height (BH): 120 mm Support legs: optionally available Conveying speed (v m/s): Please contact us and we will strive to meet your preferred conveying speed Drive: SEW geared motor Electrical data: 50Hz V380-500, 0.55 kW S1 Drive drum: Ø = 81 mm Itedepdv Rfspfx Adksd Return roller: Ø = 81 mm Options available: Supports Side guides (single-sided and double-sided) Frequency inverter for stepless speed adjustment Customizable length (longer/shorter) Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional consultation simply get in touch with us. Contact us by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Leto izdelave: 2023, stanje: novo, Max. chipping height: 200 mm Infeed width: 500 mm Feed rollers: 3 units Rotor flight circle: 600 mm Chipping length approx.: 20–30 mm Throughput – output: 16–20 cubic meters (solid/cut wood) per hour wood chips Chipper knives: 2 units Feed motors: 2 x 2.2 kW Net weight approx.: 4,100 kg Infeed: horizontal Machine frame: steel, welded with shielding gas Rotor: steel, welded with shielding gas, dynamically balanced Bearing: oversized roller bearings Bearing housings: flanged steel housings Feed rollers: steel, specially toothed Chip discharge: underneath the machine Machine grate (screen): for re-shredding of oversized chips Drive pulley: matched to main motor N = 1,500 rpm Hydraulic system: consisting of a hydraulic pump, membrane accumulator, cylinder, pressure gauge, and control valves for lifting the upper feed roller Feed: via two geared motors, manufacturer NORD GETRIEBE Itedpfoncd Azsx Adked

Stanje: novo, Leto izdelave: 2026, Drum Chipper Series ATH 300 S&F chippers and drum chippers with horizontal feed are used in many sectors of the wood processing industry (sawmills, wood factories). Chippers of the "ATH" series produce high-quality, homogeneous wood chips with a low proportion of fines from residual wood, e.g. as premium wood chips for the pulp industry or as fuel chips for energy generation. Series ATH 300 - Infeed height: 300 mm - Infeed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pcs - Number of counter knives: 2 pcs - Rotor diameter: 700 mm - Number of feed rollers: 3 pcs - Throughput capacity: up to approx. 70 cubic meters/h * - Chip length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Feed roller drive power: 2 x 3.0 kW - Operating / control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chip length, main motor kW, number of knives, feeding Advantages: Isdpfouz Hmxjx Adkstd - Maximum throughput - Low proportion of fines - Low maintenance - Versatile applications - Custom manufacture Do you need more information? Contact us! We are happy to advise you. Drum chipper | Wood chipper | Chipper | Chipping machine | Wood chipping machine | Shredder | Wood crusher

Stanje: novo, Leto izdelave: 2025, Moč motorja 7,5 kW - Rezna sila 30 t Rezni kanal zasnovan za: - maks. dolžina role 1500 mm - maks. premer role 1250 mm - Masa stroja cca 3800 kg - Prostornina rezervoarja cca 110 litrov - Zaščitna rešetka v območju upravljalne plošče in na nasprotni strani - Zaklep noža - Ravna izvedba razcepne mize - Dokumentacija 2x v nemščini (1x v besedilni obliki, 1x USB) Itsdpoltmi Ssfx Adked - Barva RAL 5012 svetlo modra Zaščitna rešetka/nožni nosilec RAL 1028 melonsko rumena Stroj na zalogi – takoj dobavljiv Cena in dodatne informacije na zahtevo

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany Isdpfemhh Dzsx Adkotd - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 1.500 h, Funkcionalnost: popolnoma funkcionalen, Votecs shredder, as new, available at a favourable price. Main motor power: 45 kW. Comparable to Weima or Rainbold. Itodpfovv H Afjx Adksd

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Itjdjmhhx Ispfx Adkod Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer valja: 50 mm, širina valja: 50 mm, kotalkanje nagibanje: 180 mm, skupna širina: 365 mm, skupna višina: 75 mm, skupna dolžina: 2.970 mm, transportna dolžina: 2.970 mm, gradbena širina: 365 mm, gradbena višina: 75 mm, TAF številka artikla: 1000003840 Tip: valjčni transporter Proizvajalec: neznan Itedjrbgr Eopfx Adked Leto izdelave: neznano Skupne mere: pribl. 2.970 x 365 x 75 mm (DxŠxV) Širina stranic: 365 mm Višina stranic: 70 mm Transportna dolžina: 2.970 mm Transportna širina: 30 mm Tip valjev: jeklo Število valjev na os: 1 kos Razmak valjev: 180 mm Premer valja: 50 mm Pogon: gravitacija Stanje: rabljeno / popolnoma funkcionalno Funkcijski preizkus: OK