Drobilnik z dvojno gredjo

LINDNER Urraco 4000 DS

Stanje: novo, Leto izdelave: 2025, Features: Cedpfx Afjw Elbdsnopw - Overband neodymium magnetic separator - HP - Dust suppression - Belt speed control - Self-propelled drive for semi-trailer

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.676 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 750 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 25.000 kg, transportna višina: 3.000 mm, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), lastna masa: 25.000 kg, volumenski pretok: 930 m³/h, obratovalni tlak: 250 letvica, Good day, We are pleased to offer you, on a non-binding basis, a used baler manufactured by Presona AB, model LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for their accuracy or completeness. Manufacturer: Presona AB, Sweden Cpedpfx Aevgrh Uofnjw Model: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Press force (main press): 78 t Specific press force: 95 N/cm² Pre-compression flap force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Fill volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (baler) approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and films. The baler is in good condition, will remain in operation until January 2025, and can be inspected by prior arrangement. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Stanje: novo, The solution for shredding large, long pipes and profiles. The ZRS series is specifically designed for the size reduction of pipes with diameters up to 1,300 mm and made from various materials such as PE, PP, and PVC. These machines are capable of directly shredding plastic pipes up to 9 meters in length without the need for pre-cutting or sawing. At the heart of the system are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently process the material at low rotational speed. The pipe is fed into an enclosed feed trough, where it is pressed against the rotor by a hydraulic pusher. The pre-shredded material is then conveyed via a belt to a granulator. The granulator reduces the material to directly processable regrind. Codpfxoghgd Io Afnopw The entire system is automatically controlled via a central control unit. Further advantages of the system include low energy consumption, prevention of power peaks, and minimization of accident risks during the pre-shredding process.

Stanje: novo, Leto izdelave: 2026, Comprising Large Bale Breaker Type MHB and Straw Shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency inverter (FU) – this controls the speed of the sliding floor. The bales are placed on the sliding floor and the feed of the milling unit is started. The tines of the milling unit tear the straw from the bale and throw it into the hopper. Ideally, the bale breaker is combined here with a straw shredder. Technical Data Bale Breaker: Capacity: 1–2 bales per hour, up to a maximum of 600 kg per hour (depending on sieve size used in the straw mill, kW rating of the straw mill). Without the straw mill, the bale breaker can process up to 900 kg/h of straw. Max size square bale: 2400 x 1200 x 800 mm (L x W x H) Milling unit motor: 5.5 kW, 380 Volt Sliding floor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for larger straw shredder (18.5 kW) + €3,940 net Technical Data MHZ with Special Hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting knives Sieve with interchangeable inserts available in (10, 12, 15) 22, 30, 45 mm perforation With star-delta switch, overload protection, and 8 m power cable, ready to plug in Blow-out spout 160 mm Blow distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Options at additional cost: Feeding auger + €970 net Cyclone (suspension to be provided by customer) *should be no more than 10 m away + €2,970 net Simple filter €1,750 net --- Other options: Industrial extraction system (ex-demo) + from €9,950 net Optional rotary valve *renders material pressureless + €5,750 net Control system: from €1,620 net Special breaker extension 3 m (*other dimensions must be calculated) + €9,750 net Briquette press MPP 180 S; little-used demo unit 70 mm briquette – up to 100 kg/h from €39,700 net * Larger machines upon request --- Description: muetek bale breaker has been developed for dissolving round and square bales of hay and straw. The shredder attached to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build. muetek bale breakers of the MHB series are equipped with a chain conveyor on which the straw bale can be placed using a front loader. The support surface is adjustable depending on the bale type. The chain conveyor pushes the bale against the milling rotor, with adjustable feed speed. The milling rotor is equipped with several teeth that tear up the straw bale. The straw separated from the bale is ejected. Codpfob Nulhjx Afnspw --- Basically, the machines are suitable for dry input materials: - Straw - Hay --- Disintegration of hemp is only possible with a special breaker Surcharge approx. €9,720 net (depending on version) Shredding of hemp is not possible with the straw mill. Requirements for the input material: Maximum moisture content 12%

Stanje: novo, Tehnični podatki: - Odprtina lijaka 1850 x 1250 mm - Volumen lijaka pribl. 3,0 m³ - Premer rotorja 500 mm - Dolžina rotorja 650 mm Cpsdpfx Aewb Sdqsfnew - Hitrost vrtenja rotorja 80 obr./min - SPS krmiljenje - Motor – prenos 18,5 kW - Električna omarica (popolnoma ožičena) vključno s 5 m kablom - Avtomatski zvezda-trikot zagon - Teža 3600 kg - Zmogljivost odvisna od materiala Glavne uporabe in obdelovani materiali: Reciklaža in volumetrično zmanjšanje neželeznih kovin Reciklaža in volumetrično zmanjšanje lesnih odpadkov Reciklaža in zmanjšanje volumna plastike ter pene / stiropora Reciklaža in volumetrično zmanjšanje električnih kablov in kolutov Reciklaža in volumetrično zmanjšanje plastičnih posod in kompozitnih materialov

Stanje: rabljeno, Leto izdelave: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained, ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and reinforced cutting frame. — Features / Scope of Delivery • 1 set of armored shafts HW 8/10 with comb scrapers and re-breaking bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with comb scrapers and re-breaking bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Cjdpfx Afjx Nkhqsnspw Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine output: approx. 566 kW (approx. 770 HP) Emission standard: Stage V / Tier 4f (depending on configuration) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: tracked chassis, hydraulically driven Applications: scrap, commercial waste, bulky waste, mixed waste, wood, recyclables — Condition: • Well-maintained machine • Fully operational • Sale as inspected on-site Additional Information / Service History The machine has always had a full maintenance and service contract directly with Lindner. All maintenance and service work has been performed professionally according to manufacturer specifications and documented. Notes: • Sale is without any warranty or guarantee. • No returns or renegotiation. • Subject to prior sale. All details are provided without guarantee. The seller accepts no liability for any errors, incompleteness, or changes to the information provided. The sale is exclusively subject to prior sale.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 1.530 h, Funkcionalnost: popolnoma funkcionalen, moč: 129 kW (175,39 KM), Naprodaj je Arjes Impaktor 250 EVO Letnik: 10/2022 Delovne ure: 1530 Vgrajena je lopatična gred za les, plastiko, komunalne odpadke ipd. Priložena je tudi betonska gred. Stroj je popolnoma delujoč in si ga je mogoče ogledati v delovanju. Cjdpow Nyt Iofx Afnopw

Stanje: novo, Klanke Supercut roll slitter for efficient cutting of waste rolls. Features: - Automatic safety interlock - Emergency stop pull cord - Siemens PLC Technical data: Knife length: 3000 mm Cutting channel opening: 1200 mm Cpodpfx Ajn I Rgpofnsw Motor power: 15 kW Cutting force: 50 tons Made to order Price and further information upon request. We are happy to provide you with a non-binding quotation.

Stanje: skoraj kot novo (rabljeno), "Hazemag Universa 1620" for sale Cpsdpfx Aeggflvefnsw Manufacturer: Hazemag Model: Universa 1620 Rotor size: 1,600 x 2,000 mm Inlet size: 2,500 x 2,000 mm

Stanje: rabljeno, Eldan granuliatorius HG129 Cpedet Uyvrepfx Afnsw