Stroj za brušenje navojev

LINDNER FS 3

Stanje: novo, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Serial No: 50020385, skupna masa: 380 kg, Model: ZF 2060 Kataloška št. dela: 3100 019 059 Serijska št.: 50020385 Referenčna št.: X51534200029 Prenosno razmerje: 2,519:1A Moč/rpm: 0,535 kW/obr/min Tlak olja v sklopki: 21,5 bar Suha masa: 380 kg Kapaciteta olja: 21 dm³ Skupaj sta na voljo 2 kosa Nwjdsvrc Uispfx Adpsp

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m O F F E R We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Nwsdpfx Ajtzdyzsdpsp Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!

Stanje: dober (rabljeno), Leto izdelave: 2002, Wheel diameter - max. 275 mm Wheel width 55 mm Module - max. 6 Module - min. 1 Njdpfxotumrpe Adpswp Control unit 840 C Siemens Total power requirement 100 kW Machine weight approx. 16.7 t Space requirement approx. 5.2 x 2.3 x 2.4 m

Stanje: dober (rabljeno), Magnetic chuck 455 x 170 mm Digital display Water tank Dressing device Wet grinding attachment Nedpfetu Il Tex Adpswp

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Workpiece diameter: 10–350 mm, max. grinding length: 660 mm, clamping length: 1055 mm, max. module: 25 mm, swivel angle: +/-60°, grinding wheel dimensions: 300–500 x 100 mm. Equipped with Faudi coolant band filter and Elbaron oil mist separator. The machine has been classified as unserviceable and can only be used as a basis for a complete overhaul. Nedpfx Ajrgah Hsdpjwp

Stanje: dober (rabljeno), NHH Lathe Swing over bed: 260 mm Swing over cross slide: 160 mm Spindle bore: 26 mm Turning length: 600 mm Heidenhain digital readout Chuck diameter: 155 mm Spindle speed: 2,000 rpm Dimensions (LxWxH): 150 x 85 x 155 cm Nwedpfjmw Ukcjx Adpjp

Stanje: zelo dobro (rabljeno), Workpiece diameter - max. 600 mm Thread length: 7000 mm Module - max. 8 / 12 Module - min. 1 Swivel range: ° Cutter diameter: 63 - 140 mm Spindle speeds - stepless: 45 - 450 rpm Machine weight: approx. 12.5 t Space requirement: approx. 9.0 x 2.0 x 2.2 m Condition: Well maintained, checked and partially overhauled by specialist company. The existing milling head has been replaced by an overhauled universal milling head. Equipment: Differential for angled machining Automatic indexing device (interchangeable index plates!) for splined and multi-start components; also extensive set of bushings, support rollers and around 70 change gears. Conversion of milling head speed control to frequency inverter with corresponding high-performance motor is a great advantage and saves much setup time. Nwodpfx Aswgizdodpep Accessories: Around 70 change gears, 3 bushing setting tools of various sizes, about 20 bushings, 2 roller supports, 2 centers for direct mounting on the clamping spindle, 350 mm chuck, 2 spare index plates.

Stanje: dober (rabljeno), For sale: Mitutoyo gauge block set. The set is not complete. Njdsu Sv Iyjpfx Adpewp

Stanje: rabljeno, Leto izdelave: 1991, Workpiece diameter: 30 mm Thread length: 110 mm Thread pitch: 0.5–2.75 mm/lead Total power requirement: 4.5 kW Machine weight: approx. 1.7 t Space requirement: approx. m MONNIER & ZAHNER Switzerland Thread Whirling Machine with Workpiece Loading Device Type MZ 600, Year of manufacture approx. 1991, #3591 Max. workpiece diameter: approx. 30 mm Max. workpiece length: approx. 110 mm Njdst Hwzcopfx Adpowp Axial milling length: approx. 100 mm Module in steel: approx. 1 Starts: 1 Minimum/maximum centre distance tool–workpiece: 0 - 70 mm Whirling head swiveling: +/-12° Tool size approx.: 70 x 16 mm Whirling head speeds approx.: 1,000–6,000 rpm Pitch range approx.: 0.5–2.75 mm/lead Whirling head drive: approx. 1.5 kW Total drive approx.: 4.5 kW – 220 V/380 V / 50 Hz Weight: approx. 1,700 kg Accessories / Special Equipment: Machine designed for the production of medical screws. Equipped with an automatic workpiece feeder via a Rübenach vibratory bowl with pneumatic swing gripper for insertion of blanks, as well as with counter-center (inserter) and ejector in the workpiece spindle head. Pneumatic workpiece clamping device in the workpiece spindle head. The finished parts are ejected and fall into a collection container. The tool slide is designed as both a longitudinal and a cross slide; the longitudinal slide determines the thread length and pitch via the leadscrew, and the cross slide determines the thread depth. Copying device at the end of the cross slide with template holder for conical screws. Pitch gearbox in the workpiece spindle stock via change gears. Simple electric program control with display of motion sequence. Fault indicator, workpiece counter, oil mist extraction, coolant system, etc.

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M 73 175, dolžina podajanja os X: 320 mm, dolžina pomika po osi Y: 60 mm, dolžina podajanja os Z: 2.100 mm, hitrost pomika os X: 2 m/min, hitrost podajanja osi Y: 75 m/min, hitrost podajanja os Z: 5 m/min, največja hitrost vretena: 3.150 obr/min, hitrost vretena (min.): 45 obr/min, poteza s peresom: 160 mm, hod vretena: 420 mm, premer tulec: 90 mm, položaj glave za glodanje: vertikal, vrsta vhodnega toka: trifazni, obremenitev mize: 3.000 kg, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Wanderer CNC extruder screw milling machine Nedpfx Adswbzvvepjwp Control system: Siemens, model Sinumerik 3M/4C Swing diameter: 200 mm Workpiece length: 2,500 mm Drive power: 20 kW Tool holder: SK50 Workpiece clamping device: 3-jaw chuck (Forkardt F315)