Drugi

linde W20 Schlepper Batterie 24/2016

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 14.500 h, Funkcionalnost: popolnoma funkcionalen, 1 used two-component injection moulding machine with robot and rotary table Manufacturer: ARBURG Model: 470S1100-400/290 Year of manufacture: 2017 Clamping force: 110 tons Tie bar spacing: 420 x 420 mm Kodpju E E Sujfx Af Nsll Min./max. mould installation height: 450 mm Opening stroke: 950 mm Screw diameter 1: 35 mm Max. shot volume: 154 cm³ Injection moulded part weight: 141 g/PS Screw diameter 2: 30 mm Shot volume: 106 cm³ Injection moulded part weight: 97 g/PS Control system: SELGOCIA Equipment: - 3 core pulls - Vertical injection unit - Rotary table - 6-axis robot, manufacturer: KUKA, model: KR 16 Wikut, year: 2010 - Conveyor belt - Safety fence

Stanje: rabljeno, Leto izdelave: 2010, Pillar slewing crane: mobile Jib outreach approx. 2500 mm Machine weight approx. 4 t Lifting capacity 125 kg Bucket empty weight 430 kg Minimum bucket fill weight 416 kg Minimum total bucket weight 846 kg Max. wheel load 391 kg Max. support load 544 kg Kodemt Rpwopfx Af Nell Without documents/papers.

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 8.900 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: P4 3125, Panelni upogibalni stroj Salvagnini P4 3125 Klsdpfjxup Tmex Af Nsl

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Motorized Swing Bending Machine Make: Hezinger/Erbend Model: MFA 3200x3mm Year: 2021 Technical Specifications Manufacturer: Hezinger / Erbend Model: HF MFA 3200 x 3 Year of manufacture: 2021 Working length: 3200 mm Ksdpsub R Spefx Af Nell Capacity: 3.0 mm Air pressure: 6 bar Upper beam stroke: 250 mm Motor: 20.2 kW Weight: 8.0 t Equipment • Rotatable upper beam with 2 tools • Bending beam swing range 0 - 135° • Motorized bending beam lowering 80 mm • Manual crowning of the bending beam • Backgauge 6 - 1300 mm with supports and ball rollers • ErFold controller • Safety foot switch with 3 pedals • Light curtain for front safety • LED status display • Tools: Upper beam pointed rail 30° R=1.0 mm Three bending beam rails: 15, 25, 35 mm Segmented gooseneck tool, height 120 mm All information without guarantee. A powered demonstration is possible at any time in our showroom.

Stanje: dober (rabljeno), Leto izdelave: 2023, obratovalne ure: 5.001 h, Funkcionalnost: popolnoma funkcionalen, X working area max.: 3000 mm Y working area max.: 1500 mm Control: TRUMPF control based on Rexroth IndraMotion MTX Machine - Closed machine frame - Hybrid axis system - Linear magazine with 24 slots for clamps and tools - Hydraulic clamps (3 pieces) - Drives with maintenance-free three-phase motors - Downholder with programmable positioning - Foot switch for closing clamps - Parts chute on right side Punching head - Delta Drive - Rotatable mono-tool holder - Programmable downholder position - Tool length compensation - Spray lubrication for punch - Punch slug extraction - Forming function - Stroke counter for punches Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Programmable cutting gas pressure - Automatic shutdown - Remote support interface - Program management - Production planning Data transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking and EC Machinery Directive compliance - Dual-beam safety light curtain Extended standard equipment Ksdpfx Aoxxbwxsf Nsll - 1st locating pin (inside right) + Brush tables + MultiTool + Thread forming with thread counter + Thread former breakage control + Lubricant level monitoring + Marking/fast embossing + Deburring and rolling technology + Adaptive stroke calibration + Spray lubrication for die + Smart Punch Monitoring + Parts flap left + Parts conveyor belt for left parts flap + Collecting tray for left parts conveyor + Sensor for parts chute + Parts conveyor belt for right parts chute + Additional clamp + 4x individually opening clamps + 4x height-adjustable clamps + Automatic clamp closing loading sensor + Optical loading sensor + Automatic repositioning movement to compensate for insertion tolerance + Repositioning device for DeltaDrive + Vibration-damped installation + Chip conveyor with tipping container + Machine status indicator + Bulge detection + Wireless Operation Point SheetMaster Compact 3000 x 1500 (AK05) - Loading station with spreader magnet for sheet separation - Suction frame - Vacuum sensors - Double sheet detection - Unloading cart for scrap skeletons and microjoint sheets - 2nd operating point for loading and unloading + Compact arrangement of light barrier and HZP + Peeling system SortMaster Compact - Machine-integrated automated small-part removal - Suction frame for unloading good parts up to 600 x 400 mm (X x Y) - 2 suction bars (each suction cup individually controllable) - Unloading area 600 x 800 mm - Vacuum sensors for suction circuits + X-axis extension - Extension of the unloading area to 1200 x 800 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, nosilnost: 1.500 kg, Le positionneur Siegmund M convient parfaitement aux travaux de soudage, d’assemblage et de maintenance. Le positionnement s’effectue via un volant manuel. Positionneurs avec capacité de charge jusqu’à 1 500 kg. Couple: 900 Nm Volant à poignée Ø 315 mm Compatibilité étrier en U: système 28 Longueur max. de l’étrier en U: 3 000 mm A - Hauteur de travail: 850 mm B - Hauteur de la colonne: 955 mm C - Hauteur totale: 1 140 mm D - Largeur de la plaque de base: 600 mm E - Longueur de la plaque de base: 600 mm Prix sans accessoires 3D. Tarifs des accessoires 3D, pièces en fonte lourde, épaisseur de paroi 28 mm usinée, tous prix spéciaux neufs: Étrier d’angle d’origine 28 forme U 500mm x 200mm x 200mm (supplément 500 €) ou 2000mm x 200mm x 200mm (supplément env. 1 000 €) ou 2400mm x 200mm x 200mm (supplément 1 300 €) ou avec plateau à trous de 28, 2000mm x 1000mm x 200mm (supplément 2 000 €) Klodovlgzajpfx Af Njl Plusieurs positionneurs disponibles.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 90 h, nosilnost: 200 kg, dvižna višina: 13.000 mm, gradbena višina: 2.100 mm, vrsta goriva: električni, vrsta pogona: Elektro, Členasta teleskopska dvižna ploščad Tehnično stanje: zelo dobro Sprednje pnevmatike tip: polna guma Sprednje pnevmatike dimenzija: 600x190 Zadnje pnevmatike tip: polna guma Zadnje pnevmatike dimenzija: 600x190 Baterija volt: 48V CE certifikat, Klodpfx Afsvky D Ss Nsl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 5.000 h, Funkcionalnost: popolnoma funkcionalen, najv. debelina jeklene pločevine: 3 mm, maks. debelina aluminijaste pločevine: 4 mm, Salvagnini-Linie in perfektem Zustand Kodpfx Asv Icmqjf Njll Konfiguration: MD1.30 Lager + S4.30xe Stanzmaschine + IA3015 Entladeeinheit + ACN manuelle Biegeeinheit für Paneele + RIP Wendevorrichtung + P4L 2516 Biegezentrum (2,5 m Biegelänge) + SAP Entladeeinheit

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 18.400 h, Funkcionalnost: popolnoma funkcionalen, najv. debelina pločevine: 3 mm, skupna dolžina: 32.000 mm, skupna višina: 5.000 mm, skupna širina: 11.500 mm, Salvagnini proizvodna linija – debelina pločevine do 3 mm Kombinirana linija, sestavljena iz skladiščnega stolpa, štancalnega stroja, obračalne in rotacijske enote, nihajnega upogibnega stroja, izhodne postaje (ročne ali avtomatizirane) ter upogibnega stiskalnice: MD1-3015.RCP.M9; S4_1931; ACN_0389; P4M_822; MB_1080_RBF; B3.170-3000 INCOTERMS: Ex-Works Klodjx Da Nkjpfx Af Nsl Demontaža, pakiranje, iznos in prevzem na stroške kupca Lokacija: Siemens AG, Carl-Benz-Straße 22, 60386 Frankfurt na Majni. Za več informacij ali v primeru zanimanja nas kontaktirajte.

Leto izdelave: 2010, Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: MBUT134WSK, Technical data: 1x Demag KBK 1 wall-mounted slewing crane, SWL 125 kg with chain hoist Safe working load at maximum outreach: 125 kg / 0.125 t Outreach: approx. 2 m Total weight: approx. 150 kg Including steel chain hoist for 125 kg Includes pins, cable trolley, travelling gear, end cap etc. ----- Alternatively, 3m cranes with 125 kg or 250 kg safe working load are available Kodpfx Afepwgr Hs Noll Slewing range: 300°, 400V 16A connection Crane is dismantled and available immediately Item location: 75053 Gondelsheim More cranes available, SWL 80–5000 kg, please inquire See images (sample photo) Shipping by freight carrier or collection only by appointment