LIGNUMA MM-700 dvoglava žaga

LIGNUMA MM-700/2

Leto izdelave: 2009, obratovalne ure: 214 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Thin-cutting frame saw DSG Sonic – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Technical condition: EXCELLENT, only 214 operating hours Technical specifications: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Number of frame strokes: approx. 550/min Cutting heights with different blade lengths: Blade length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with twin planer) Blade length 420 mm → cutting height: 30–128 mm, 45–128 mm Blade length 500 mm → cutting height: 80–210 mm, 45–210 mm Blade length 550 mm → cutting height: 80–254 mm, 45–254 mm Block lengths: For standard machine: +185 mm With magazine: 250–1700 mm With twin planer: +250 mm Block height difference: ±0.5 mm Cutting width with side fence: 140 mm 🔹 Additional technical data: Cutting width with middle fence: 2 × up to 60 mm Optional channel width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss when cutting (kerf thickness): from 0.9 mm Saw blade life (depending on wood type): ~40 hours Machine weight: - Basic version: 3,000 kg 🔉 Noise levels (hearing protection required): At the machine (1 m): - Idle run: 97 dB(A) - Cutting: 99 dB(A) At operator workstation: - Idle run: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and air system: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3,200 m³/h (30 m/s) Operating air: - Min. 6 bar - Consumption: 200 l/min Lubrication: central, with guide rail monitoring ⚡ Electrical data: Nwjdpfsw Dp Ufox Adyeb - Power supply: L1, L2, L3 + PE - Connecting cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 1000 DİJİTAL METRE, • 3 metre dolžina • +/- 0,1 mm merilna natančnost • Servomotor (opcijsko) • Opcija decimalnega načina delovanja (zlasti za aluminij) Nwjdpfjrblalsx Adyob • Opcija merjenja preko Bluetootha (za podrobnosti nas kontaktirajte) • Napetost 220 V • Zaslon na dotik • Funkcija pomikanja naslona nazaj z enim gumbom za enostavno odstranjevanje izdelka iz kalupa • Uporabniku prijazna zasnova • Enostavna kalibracija

Stanje: novo, Leto izdelave: 2024, pritisk: 8 letvica, Horizontal mitre adjustment 15°–90°15°, stepless Saw motor 5.50 kW (400 Volt) Saw blade Ø 600 mm Travel range rear stop 180 mm Working height 940–1000 mm, adjustable via feet 2 x extraction ports (top of hood and bottom) Net weight 600 kg WxDxH 135x140x150 cm RAL 9007 Grey Aluminium Rotary table made from ground nickel steel Saw head with recirculating ball guides, designed for high accuracy, long service life, and high rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed Chip flow directed toward extraction hood. Equipment • Precision underfloor circular saw • Mitre adjustment 0º/45º/90º/-45º/-60º, stepless • Incl. 2 pneumatic vertical clamps • Infinitely variable saw blade feed rate • Two-hand safety control • Adjustable rear material stop • Chip extraction device – chip extraction system • Mist spray unit for air-oil cooling • Air pistol with spiral hose • Incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade Ø 600 mm • Saw blade not included in delivery! Our NC pusher system ensures your workpieces are positioned at the desired working position on our UK 600 HA 90°. A gripper clamp secures the material, and the NC control automatically positions it. Afterwards, the clamping and sawing process is activated. Positions are pre-programmed in the control system. Once the machining operation is completed by the machine, it automatically moves to the next sawing position. Depending on the workpiece, multiple parts can also be clamped and positioned simultaneously, stacked or side by side. You are welcome to inspect the desired machine at any time in our manufacturing/demo hall. Please feel free to contact us regarding this. Nwodpfxegwt S To Adyeb Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 403 Alüminyum Pvc Kesim Makinası, • V skladu s standardi CE. • Namenjen za rezanje aluminijastih in PVC profilov. • Hidro-pnevmatsko rezanje. • Prilagoditev hitrosti rezanja glede na profil. • Možno rezanje pod fiksnimi koti desno in levo: -60, -45, -30, -22,5, -15, 0, +15, +22,5, +30, +45, +60 stopinj. • Pnevmatski vertikalni in horizontalni stiskalec. • Aluminijasta žaga z diamantno konico Ø600 ali Ø650 mm. • Na voljo valjčni transporter (3 metre desno in levo). • Sistem za pršenje olja. Nsdpjramrzjfx Adyswb • Natančno rezanje zahvaljujoč 3 kW motorju in Hydro-check systemu. • Možnost dela z digitalnim merilcem.

Stanje: novo, Leto izdelave: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical Features of the Saw Unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical Features of the Feed System: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for package weight up to 80 kg Maximum speed of feed system: 90 m/min Pneumatic raising of the pusher at the end of the cutting cycle with overhead return Data Input Management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port Linux operating system Load and save machine parameters via USB port Edit and enter cut cycles (patterns) directly on the controller Upload cut lists created on PC via USB or Ethernet port Nsdpfx Aehw Ng Iedyewb Operating Software: Manual input of stock length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1000 cut lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization Piece length measurement via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: complete optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: "OPTI PLUS" package: for removing knots and defects Photocell for reading knots and defects for timber mapping Marking with fluorescent chalks/crayons (Note – only orderable in combination with ZA250) Pneumatic side clamping unit

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Üstünkarli UDKP 160 Cutting height: 160 mm Nwsdpfx Adjucnudoysb Chain bed approx. 420 mm With spikes in the chain bed Including slat bushing and intermediate rings Main motor: 75 kW

Stanje: pripravljen za uporabo (rabljen), Linija za predelavo desk s sledečimi stroji: Nodpfx Adogwqk Soyowb Ena dvorezna robilna žaga Ena enorezna vodoravna prerazžagalna žaga (horizontalni tračni razrez) Transportni trakovi med stroji so vključeni.

Stanje: novo, Leto izdelave: 2026, Popolnoma avtomatsko rezanje srednje velikih do velikih aluminijastih profilov z enostavno avtomatizacijo za uporabo. Preprosto odložite kateri koli aluminijasti profil, stroj ga avtomatsko zazna in razreže po nalogah z visoko natančnim servo pomikom materiala. Uvoz Excelovih seznamov nalog preko WIFI za enostaven vnos obsežnih seznamov za razrez. Za vsak kos aluminija, ki ga položite za razrez, ne glede na dolžino, laserski senzor izmeri dolžino. Naš zmogljiv algoritem optimizacije sproti izračuna optimalno zaporedje izreza za minimalne odpadke. Stroj po tem seznamu izrezuje avtomatsko, brez prekinitev. Vmesni vnosi niso potrebni – vi samo prinašate novo zalogo aluminija. Enostavna, hitra alternativa dvo-glavnim žagam. Preprosto vnesete (ali uvozite) potrebne dolžine in kote ter pritisnite GO. Stroj neprekinjeno proizvaja vaše kotne dele, natančno in hitro. Nwodjf Ekn Iopfx Adyeb • Popolnoma avtomatsko rezanje z avtomatskim podajanjem in rezanjem na dolžino. • Enostaven uporabniški vmesnik za avtomatsko delovanje – vnos naloge in razrez v nekaj sekundah. • Poenostavljeno razrezovanje kosov, serij ali velikih excel seznamov. • Paketno/multi-palčno rezanje in štetje. • Oddaljen vnos excel seznamov nalog prek WIFI z naprednim povezovanjem podatkov. • Popolnoma nastavljiva hitrost podajanja žage in materiala za največjo produktivnost procesa. • Samodejni optimizacijski način z laserskim merjenjem dolžine in minimizacijo odpadkov (opcijsko). • Samodejni izpis etiket za kose na podlagi podatkov iz delovne naloge (ročno lepljenje, opcijsko). • Neposredno vrstično tiskanje na material brez posega operaterja (opcijsko). • Tiskanje ali skeniranje črtnih oz. QR kod za vnos nalog (opcijsko). • Avtomatiziran servo pomik kota žagine glave do ±75° (opcijsko). Odlično primerno za: • Proizvodnjo oken in vrat • Proizvodnjo aluminijastih kotnih konstrukcij • Proizvodnjo aluminijastih sestavljenih konstrukcij • Proizvodnjo kompozitov • Proizvodnjo žaluzij, senčil in pohištva • Trgovino z aluminijem Model: A550 Dolžina: 3 m Linearni pogon: ProfiStop Alpha Dolžina materiala: 1680 mm Potisna zmogljivost: 20 – 40 kg Programska oprema: Optimiser KAKOVOSTNI STROJI IZ AVSTRALIJE.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Max. working size (mm): 400 x 300 mm Distance from saw blade to work table (mm): 3–200 mm Conveyor belt width (mm): 385 mm Saw wheel power (kW): 18.5 kW Saw unit gear wheel diameter (mm): 711 mm Feed speed (m/min): 0–12 m/min Hydraulic pressure (kg/cm²): 55 kg/cm² Dust extraction outlet diameter: 102 mm x 2 Nodji Ay Hqjpfx Adyewb Saw blade size (L x W x H) (mm): 4572 x 27 x 0.9 mm Saw kerf (mm): 1.5–1.8 mm Overall dimensions (L x W x H) (mm): 3000 x 2250 x 2000 Net weight (kg): 2100 kg

Leto izdelave: 2020, Stanje: novo, Available from stock Band dimensions: 4420 x 34 x 1.1 mm Cutting capacity (rectangular): 360 x 400 mm Nwodpfx Aeiryf Sodyob Cutting capacity (round): 360 mm Bundle cutting: 180 - 280 x 50 - 160 mm Cutting speed: 35 - 85 m/min Main drive motor power: 3.75 kW Hydraulic pump motor power: 0.75 kW Coolant pump motor power: 0.125 kW Table height: 755 mm Weight: 1,680 kg Dimensions (W x D x H): 2400 x 2120 x 1840 mm