Objemka za nosilec 450 mm

LHS- Lastaufnahmemittel 1 to

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Nlodpfsfg E Hpjx Ab Isi Price on request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 300 kg, skupna širina: 1.260 mm, skupna dolžina: 1.500 mm, Universal dynamic balancing machine for rotors from 3 to 300 kg. Equipped with CAB803 measuring system, class C safety guard, CE marked. Nledeu Nmppopfx Ab Iji

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 800 mm, merilno območje osi Y: 1.800 mm, merilno območje os Z: 500 mm, trajanje garancije: 12 meseci, skupna višina: 3.000 mm, vrsta vhodnega toka: trifazni, We are selling our test and demonstration machine from our Solution Center. Additional machines are available. Please feel free to contact us. Zeiss | UMC850 with Renishaw PH10 and SP25 scanning system featuring Renishaw MODUS metrology software Retrofitted coordinate measuring machine (CMM) with the latest Renishaw technology Year of manufacture: approx. 1990 / Refurbished in 2022 – wrapped in light grey Measuring range XYZ: 800 x 1800 x 500 mm Measurement uncertainty MPE (E0): 2.6 + L/300 in µm Equipment: - Renishaw UCC S3 controller, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - TONiC™ encoder system on all axes - Renishaw PH10 motorized indexing head with SP25-2 scanning system incl. FCR25-L6 probe change rack (6 ports) - MODUS metrology software, latest version, with CAD import (STEP format), includes 1 year software maintenance Njdpfx Asvxhzujb Isli - PC system with Windows 10, dual 27" TFT monitors (NEW) including height-adjustable desk - Control cabinet equipped with the latest safety features - Base plate We are happy to configure the equipment according to your requirements. Optional service package (upon request): Delivery to site (curbside) | Commissioning | Inspection | Accuracy acceptance according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and configurations available upon request

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel Nledpfxefg E Hle Ab Iji • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Leto izdelave: 2022, Stanje: kot nova (razstavni stroj), Manipulator with hydraulic height adjustment, faceplate with clamping slots, and handheld remote control. Height (faceplate horizontal): approx. 532 – 1,132 mm Stroke/travel distance (hydraulic): approx. s = 600 mm, t = 20 s Faceplate swivel range: approx. ±300° Height (axis, faceplate vertical): approx. 709 mm Faceplate dimensions: Ø1,200 mm x 40 mm, 6x clamping slots Main spindle speed: approx. 2.0 rpm (others on request) Nledpfx Ajfw Ah Rjb Ioi Main spindle torque: approx. 7,500 Nm Faceplate speed: approx. 2.5 rpm Faceplate torque: approx. 1,500 Nm

Stanje: novo, Thread diameter M3 - M8 mm Electric tapping machines for M3 - M8 threads, angle adjustable. Includes 5 quick-change chucks with slip clutch. Adjustable via display: Variable speed, adjustable depth, material selection, reversible main rotation, thread selection. Optional: - Clamping table with T-slots: 990x700x800mm. - Magnetic base. Nodpfxjfg U Sno Ab Ieli

Stanje: rabljeno, Technical details: Spindle diameter: 130 mm Nlodpsvr S Uljfx Ab Iji Drilling depth: 1380 mm X-travel: 2500 mm Y-travel: 1600 mm Z-travel: 380 mm W-axis: 900 mm quill stroke U-axis: 320 mm slide stroke Control system: on request Tool holder: ISO SK50 Feed rate: cross slide: 4.5–180 rpm Spindle speed: 4.5–900 rpm Feed rate (X/Y): 5–2000 Total power requirement: approx. 40 kW Approx. machine weight: approx. < 35 t plus additional equipment The machine can be offered in four different sales options. Please select: 1. The machine is in like-new mechanical condition, as is/where is. 2. The machine as is/where is, incl. plate table 4000x2000x300 mm = stock no. 1101081 3. The machine rewired, with new electrical cabinet, digital display, with 4 axes, Siemens AC drives, Siemens axis motors (50A/31Nm), with 12 months warranty on all new parts. 4. Optional additional equipment can also be offered, e.g. coolant system, chip conveyor, enclosure, etc. Let's discuss your specific needs. Best regards.

Stanje: rabljeno, Leto izdelave: 1973, Spindle diameter: 130 mm X travel: 3,000 mm Y travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal travel: 3,000 mm Y – Spindle housing vertical travel: 2,000 mm Z – Spindle stroke: 1,000 mm Table size (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./Max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 – 2,000 mm/min Rapid traverse for spindle headstock and column: 5,000 mm Quill feed: 0.5 – 1,200 mm/min Spindle speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Nlodst Hwt Sspfx Ab Iei Accessories / Special equipment: • Heidenhain 3-axis digital readout, hardened guideways, ball screws • Infinitely variable spindle speeds and feeds, individually motorized feed drives • Operator’s traveling platform, pendulum panel control, manual hand panel, platform • Hydrostatic column displacement • Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (H), one side face machined • Hydraulic clamping for column/carriage, motorized tool clamping • Extensive accessories including tool holders with and without tools • Separate chip extraction system, clamping aids, 1 clamping angle plate and plates, and much more

Stanje: dober (rabljeno), Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek Finish Gas Chamber Furnace Type 003.05 With charging trolley Maximum temperature 200 °C Nledpfx Abed Spx De Ioi Approximate internal dimensions (W 1900 mm x D 2950 mm x H 1800 mm) You can find more items – new and used – in our shop! International shipping costs available on request!

Stanje: dober (rabljeno), Leto izdelave: 2014, Machine type: 3D CNC Coordinate Measuring Machine (CMM) Nljdpsv R Uzljfx Ab Ioi Make: Wer Model: Scopecheck 400/400/300/FB/Z