Oblikovalnik

Leadermac Thundermac 923T 150m/min not Weinig

Stanje: delavnici obnovljeno (rabljeno), Leadermac Thundermac 923T Lrodpfjx N T I Tox Abbog Vretena: 9 x 50 mm x 6000 min⁻¹ Spodaj (22 kW) - Desno (15 kW) - Levo (15 kW) - Desno (15 kW) - Levo (15 kW) - Zgornje (22 kW) - Spodaj (22 kW), Zgornje (22 kW) - Spodaj (22 kW). Delovna širina: 250 mm, višina: 160 mm. Maksimalna podajalna hitrost 100 m/min (možno povečati na 150 m/min) Ravni skobeljni noži. Profilni skobeljni noži. Priklop: 380 V / / 50 Hz, 400 A. Polna dokumentacija priložena.

Stanje: dober (rabljeno), Weinig Hydromat H23 50 mm vretena, 6.000 obr./min Spodní frézka připravena, 15 kW Pravá frézka připravena, 11 kW Levá frézka připravena, 11 kW Pravá frézka připravena, 11 kW Levá frézka připravena, 11 kW Horní frézka připravena, 15 kW Spodní frézka připravena (rovinná frézka), 11 kW + ložisko na konci hřídele Horní frézka připravena (rovinná frézka), 11 kW + ložisko na konci hřídele Ljdewmw Nvepfx Abborg Spodní frézka připravena, 15 kW Možnost dodatečného osazení dalšími rovinnými nebo profilovými frézami dle potřeby! Motor posuvu 15 kW Automatický mazací systém Možnost dodání vstupního a výstupního dopravníku k hoblovce dle potřeby. Možnost nabídky nástrojů dle požadavku.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1981, WEINIG Hydromat H25R, S/N 2603-624, year 1981, with walk-in KASCHWIG soundproof cabin – ALMOST NEW, year 2017 - Short infeed table with heavy-duty 6-roller infeed 1st spindle bottom 11.0 kW 2nd spindle right 11.0 kW 3rd spindle left 11.0 kW Lrodpfx Aetkt Tpebbeg 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW - Hydraulic feed 6–60 m/min - Feed motor 22.0 kW - 4 driven table rollers - Spindle diameter 50 mm - Automatic table lubrication - Spindles 1 + 4 + 5 + 6 with outboard bearing - Spindles 1 + 4 with straight jointer - Feed rollers 170 mm - Approx. 10 hydro planing heads included - Extraction hood above the machine

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet Ledjwvqkljpfx Abberg • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: dober (rabljeno), Four-side planer WEINIG Model U17N 8 spindles Working width up to 170 mm Working height up to 120 mm Feed speed infinitely variable, 6–36 m/min Lrjdpfx Ajupkc Ejbbeg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, working width 300 mm working height 140 mm feed speed 200 m/min spindle diameter 50 mm spindle configuration: 1. bottom - 22 kW 2. top - 22 kW 3. right - 18.5 kW 4. left - 18.5 kW 5. right - 18.5 kW 6. left - 22 kW 7. top - 22 kW Lrjdpsvu Sayjfx Abbjg 8. bottom - 22 kW 9. top - 22 kW 10. bottom - 22 kW 11. bottom - 22 kW

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Planer machine WEINIG, model Hydromat 30R Year of manufacture: 1984, No. 2609/686 Technical specifications: Planing width: 300 mm Planing height: 150 mm Maximum feed speed: 120 m/min, motor power: 30 kW Spindle arrangement: 1. Bottom horizontal spindle – 15 kW + counter bearing + jointer 2. Right vertical spindle – 11 kW 3. Left vertical spindle – 15 kW 4. Top horizontal spindle – 18.5 kW + counter bearing + jointer 5. Right vertical spindle – 18.5 kW 6. Left vertical spindle – 18.5 kW 7. Top horizontal spindle – 15 kW + counter bearing + jointer 8. Bottom horizontal spindle – 18.5 kW + counter bearing 9. Bottom horizontal spindle – 11 kW + counter bearing + jointer - Spindle diameter: 50 mm Ljdpsupurqefx Abborg - Automatic table lubrication system - 9 driven rollers in the table - Supplied with tools and accessories - Knife setting device included

Stanje: rabljeno, Leto izdelave: 2004, Visokohitrostni oblikovalni stroj 8 delovnih postaj Digitalno pozicioniranje Digitalni prikazovalnik Kromirana miza Samodejno mazanje Sheitek avtomatski zlagalnik Lodpfx Absxtmi Ajborg Hitrost 65 m/min 380V

Stanje: dober (rabljeno), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Four-side Planer / Moulder Unimat 22N, 7 Spindles Lsdpfxet Eu Hte Abborg Year of manufacture: 1979 Serial No.: 286512746 Manufacturer: Weinig Germany Planing width: 220 mm Planing height: 120 mm 7 cutterhead spindles: Planing table length: 2000 mm Spindle arrangement (spindle speed 6000 rpm): 1. bottom, 4 kW 2. left, 5.5 kW 3. right, 7.5 kW 4. left, 4 kW 5. top, 7.5 kW 6. bottom, 7.5 kW 7. bottom, 4.0 kW Spindles 5, 6, 7 with counter bearing 3 table rollers (not powered) Spindle diameter: 40 mm Cutterblock diameter: 125 mm Cutterblock working range: 100–180 mm Max. cutterblock diameter (milling spindles): 180 mm Cardan feed system Feed steplessly adjustable (frequency inverter) 6–36 m/min Manual Waxilit pump Overall dimensions L 4500 mm x W 1600 mm x H 1700 mm Weight: 4500 kg Supplied with 7 planing/cutter heads included

Stanje: rabljeno, Leto izdelave: 2021, Unladen weight: 12,000 kg Dimensions (L x W x H): 710 x 220 x 190 cm Price: On request - Year of manufacture: 2021 - Documentation available: Yes - CE marking present: Yes - CE certificate available: Yes - Serial number: 2010016 - Number of spindles [pcs]: 9 Ledpfx Abexiw Hqsbsrg - └ Spindle 1: - Motor power [kW]: 11 - Spindle diameter [mm]: 50 - Planer shaft speed [rpm]: 6000 - Tooling included: Yes - └ Spindle 2: - Motor power [kW]: 11 - Spindle diameter [mm]: 50 - Planer shaft speed [rpm]: 6000 - Tooling included: Yes - └ Spindle 3: - Motor power [kW]: 11 - Spindle diameter [mm]: 50 - Planer shaft speed [rpm]: 6000 - Tooling included: Yes - └ Spindle 4: - Motor power [kW]: 15 - Spindle diameter [mm]: 50 - Planer shaft speed [rpm]: 6000 - Tooling included: Yes - └ Spindle 5: - Motor power [kW]: 11 - Spindle diameter [mm]: 50 - Planer shaft speed [rpm]: 6000 - Tooling included: Yes - └ Spindle 6: - Motor power [kW]: 11 - Spindle diameter [mm]: 50 - Planer shaft speed [rpm]: 6000 - Tooling included: Yes - └ Spindle 7: - Motor power [kW]: 11 - Spindle diameter [mm]: 50 - Planer shaft speed [rpm]: 6000 - └ Spindle 8: - Motor power [kW]: 15 - Spindle diameter [mm]: 50 - Planer shaft speed [rpm]: 6000 - Tooling included: Yes - └ Spindle 9: - Motor power [kW]: 11 - Spindle diameter [mm]: 50 - Planer shaft speed [rpm]: 6000 - Tooling included: Yes - Min. planing width [mm]: 20 - Max. planing width [mm]: 300 - Min. planing height [mm]: 10 - Max. planing height [mm]: 200 - Feed speed: - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 36 - Shipping dimensions: 7100mm x 2200mm x 1900mm (L x W x H) - Shipping weight [kg]: 12,000kg - Shipping packages [pcs]: 1 Financial information VAT: The stated price is exclusive of VAT VAT/differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial sector equipment Glenn Smeets